How to email sequence for edit

I am editing a project and trying to email sequence for my editor to use revised sequence and keep getting an error message... please help

Just how are you trying to send a sequence? As far as I know, the proper method would be to send the project file.

Similar Messages

How to disable col for editing in Advtable upon selection of radio btn

Hi,
how can we enable or diable editing of few columns in advance table based on selection of radio button?
i have 2 radio button on a page and one advance table (col1 ,col2,col3,col4,col5)
rad1 rad2 radio button
if user select rad1 then in advance table col1 col2 should be enabled for editing
if user select rad2 then in advance table col3,col4,col5 should be eanbled for editing and other col1 and col2 should be disabled for editing.
how can we accieve this in OAF ?
please guide me.

i tried this way:
---Set Action type property for radio to : FirePArtialAction and Event:ReadOnly
In CO PFR:
if("ReadOnly".equals(pageContext.getParameter(EVENT_PARAM))
AM.setReadOnly();
and then i need to set the value of the readonly property of the required columns based on the radio button selected
For the columns i bind the read-only property to transient attribute using SPEL
--Created Transient attr in advance table vo:
Name:ReadOnlytr
Type:Boolean
Updatble:Always
---Preapared SPEL syntax:
${oa.ViewObject1.ReadOnlytr}
---In Advancetable region for items set ReadOnly:
ReadOnly:${oa.ViewObject1.ReadOnlytr}
AM:
public void setReadOnly()
Code:
// now i need to make relevant columns to read only by setting the value of " ReadOnlytr " transient attribute for entire column values .
i am not getting how will i set value of " ReadOnlytr " transient attribute for entire column value .
but after doing this,page is not showing any error but its only refreshing page after PPR is fired ,
Please guide me whether i am following the correct steps.

How to transfer video for editing?

My brother want to send me video (imported from his video camera) so that I can edit it and send it back to him.
We both have imovie '09. We would like to use idisk to do this.
He tried creating a project and then copying that to idisk. When I downloaded, it said that I did not have the source video - which is true. I has hoped it would come with the project.
Is there a way to simply get the video that he recorded from his computer to mine via idisk so that I can edit it in imovie?
I tried looking up the answer in "Support" and either could not find it, or could not understand it.
Thank you so much for your assistance.

The source files will be in a folder named "iMovie Events". This folder may be on the internal drive or on an external drive (if one is being used) - depending on where Events are being stored.
There should be a folder for each of your Events inside that iMovie Events folder. Inside each Event folder you will find all the individual clips that have been imported for that Event. Also, you will find 2 other folders - iMovie Cache and iMovie Thumbnails. The Cache folder contains a complete .mov version, in AIC format, of your imported clips.
When burning the data DVD, ensure that the full Event folder is copied - not just the clips. I'm not absolutely sure if you will need the Cache and Thumbnail folders, but it's better to be safe than sorry! Logically, you should be able to recreate the Event simply by importing all the clips originally imported by your brother. These clips will already be in a format suitable for editing in iMovie.
John

My computer - how can I improve for editing

I am a hobby-editor . . . :-)
Still I am curious to get some hints on which parts of my computer could be improved for video editing.
So hopefully someone here could have a look on my hardware!
Here are the specs: (in german!)
Mainboard:
Asus P6X58D-E
ATX, Sockel 1366, Intel X58 / ICH10R Chipsatz, DDR3-1600
Hersteller      Asus
Modellbezeichnung      P6X58D-E
CPU Sockel      1366
unterstützte Prozessoren      Intel Core i7, Core i7 EE, Xeon (Nehalem)
Mainboard Chipsatz      Intel X58 / ICH10R
BIOS Hersteller      AMI
Formfaktor      ATX
QuickPath Interconnect QPI (MT/s)      6400
ATX 12V Anschluss (8polig)      1
ATX 2.0 Anschluss (24polig)      1
Arbeitsspeichertyp      DDR3
Arbeitsspeicher maximal (MB)      24576
Speichertakt (MHz)      1600/1333/1066 (2000* *OC)
Speichersteckplätze      6
Triple Channel Unterstützung      vorhanden
PCI (32-Bit) Steckplätze      2
PCIe x1 Steckplätze      1
PCIe x16 2.0 Steckplätze      3
SLI / Crossfire Unterstützung      2/3 Way SLI/Quad CrossFireX
SATA Controller      Intel ICH10R + Marvell® 9128
SATA Anschlüsse      6x SATAII + 2x SATAIII
SATA Protokolle      SATAI-III
Unterstützte RAID Level      0,1,5,10
USB Protokolle      USB 3.0/2.0/1.1
USB Anschlüsse extern      4x USB 2.0 intern + 4x USB 2.0 extern + 2x USB 3.0 extern
Soundchip      Realtek® ALC889
Audiokanäle      8
SPDIF Ausgang      1x optisch, 1x koaxial
LAN Chipsatz      Marvell 88E8056®
LAN-Ports      1
LAN-Transferrate (MBit)      10/100/1000
Anschlüsse für Lüfter      5
PS/2 Schnittstelle (Tastatur)      1
PS/2 Schnittstelle (Maus)      1
IEEE1394a Firewire Schnittstelle      1
CPU:
Intel Core i7 950 (3,06GHz)
Sockel 1366, Box - inkl. Kühler
Hersteller/Modellbezeichnung
Hersteller      Intel
Prozessor Modell      Core i7
Sockeltyp
Prozessor Typ - Taktfrequenz      950 (3,06GHz)
CPU Modellnummer      BX80601950
Sockel      1366
Packungstyp      Box - inkl. Kühler
Prozessorkern      Bloomfield
Anzahl Kerne      4
QuickPath Interconnect QPI (MT/s)      4800
Cache
Energieverbrauch
L1 Cache (kB)      4 x 64
L2 Cache (kB)      1024
L3 Cache (kB)      8192
Energieverbrauch (Watt)      130
Herstellungsprozess (nm)      45
Kühler      Original Intel Box Kühler
RAM:
6144MB DDR3 Kingston KVR1333D3N9K3/6G
DDR3 - 1333 (PC3 - 10600)
Hersteller/Modellbezeichnung
Hersteller      Kingston
Herstellernummer      KVR1333D3N9K3/6G
Technische Daten
Kapazität (MB)      6144
Kit bestehend aus      3 x 2048MB
Speichertyp      DDR3
Speicherstandard      DDR3 - 1333 (PC3 - 10600)
Anschluss      DIMM 240-Pin
Timings
CAS Latency (CL)      9
RAS-to-CAS-Delay (tRCD)      9
RAS-Precharge-Time (tRP)      9
Festplatte:
1000GB Western Digital Caviar Black WD1002FAEX
3,5", Serial-ATA/600 (6Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      Caviar Black WD1002FAEX
Festplattenkapazität (GB)      1000
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/600 (6Gb/s)
Umdrehungen / Min.      7.200
Geräuschentwicklung Betrieb (dB)      33
Geräuschentwicklung StandBy (dB)      28
Max. Transferrate (lesen) MB/s      keine Herstellerangaben verfügbar
Max. Transferrate (schreiben) MB/s      keine Herstellerangaben verfügbar
Zugriffszeit (ms)      4,2
Cache (MB)      64
Gewicht (g)      690
Abmessungen (BxHxT) (mm)      101,6 x 25,4 x 147
ARLT Garantie      Kein OEM. 5 Jahre Herstellergarantie. 3 Jahre ARLT Garantie davon 6 Monate Soforttausch bei Defekt
wegen mehr Platz, größerem Cache, halber Zugriffszeit und SATA3-Schnittstelle, Transfer Rate (Buffer To Disk) 126 MB/s (Max) - sehr guter Wert !
Brenner:
LG GH22NS 22/22/48/32 DVD-Brenner, S-ATA
Super Multi DVD-Brenner ? mit S-ATA Schnittstelle
INTERNER 22x/22x Super Multi DVD-Brenner mit SecurDisk Unterstützung. Der perfekte Alleskönner für Ihren PC. Brennt nicht nur die gängigen Formate (DVD+R/+RW,-R/-RW) sondern auch DVD-RAM und ist außerdem durch die Double/Dual Layer Funktionalität für die Zukunft gerüstetHersteller      LG
Modellbezeichnung      GH22NS40
Farbe      schwarz
Bauart      intern
Schnittstelle      Serial-ATA
Formfaktor (Zoll)      5,25
Medienaufnahme      Schublade
Puffer (Kb)      2048
Zugriffszeit CD-ROM (ms)      120
Zugriffszeit DVD-ROM (ms)      140
Zugriffszeit DVD-RAM (ms)      175
Lesen CD-ROM      48
Lesen DVD-ROM      16
Lesen DVD-RAM      5
Schreiben CD-R      48
Schreiben DVD-R      22
Schreiben DVD+R      22
Schreiben CD-RW      32
Schreiben DVD-RW      6
Schreiben DVD+RW      8
Schreiben DVD-R DL      10
Schreiben DVD+R DL      10
Schreiben DVD-RAM      12
Betriebs-LED      vorhanden
Grafikkarte:
Gainward Geforce 9500GT
1024MB, PCIe 2.0, DVI, VGA, HDMI
Hersteller/Modellbezeichnung
Hersteller      Gainward
Anschlussart      PCI-Express 2.0
Stromversorgung
Maximaler Verbrauch bei Volllast (Watt)      75
GPU
GPU Hersteller      NVIDIA
GPU Bezeichnung      Geforce 9500GT
GPU Takt (MHz)      550
Kühlung      passiv
DirectX Version      10
Shader Model Version      4.0
OpenGL Version      2.0
HDCP Unterstützung      Ja
NVIDIA CUDA-fähig      Ja
Grafikspeicher
Speicherkapazität (MB)      1024
Speichertyp      DDR2
Speichertakt (MHz)      800
Speicheranbindung (Bit)      128
RAMDAC (MHz)      400
Dual-Link Unterstützung      ja
unterstützte Auflösungen
Max Auflösung (dpi)      2560x1600x32Bit 60 Hz (Dual Link)
SLI / Crossfire Unterstützung      SLI
Anschlüsse
DVI Schnittstelle      1
VGA D-Sub Schnittstelle      1
HDMI Schnittstelle      1
Unterstützte Betriebssysteme      Windows XP, Windows Vista
Zubehör      Treiber CD
Packungstyp      Retail
Netzteil:
550Watt, ARLT Netzteil, 12cm Lüfter, 20+4pin, schwarz
Anschluß Mainboard
ATX (20pin. + 4pin. Buchse)
Anschlüsse Endgeräte
8x 4 Pin Stromanschlüsse (HDD), 2x 4 Pin Stromanschlüsse (FDD), 2x SATA Stromanschlüsse, 1x 6 Pin Stromanschluss (VGA), 1x 4 Pin Stromanschluss (CPU)
Eingänge
230V Netz
Leistung
550Watt
Lüfter
1x 12x12cm silent
Hersteller/Modellbezeichnung
Leistung
Hersteller      Arlt
Modellbezeichnung      LowNoise
Watt      550
Anschlüsse
ATX 12V Anschluss (4polig)      1
ATX Anschluss (20polig)      1
ATX 2.0 Anschluss (24polig)      1
S-ATA Stromanschlüsse      2
3,5" Anschlüsse      2
5,25" Anschlüsse      8
Eingangsspannung (V)      230
Sonstiges
Bauform      ATX
Lüfter (mm)      120
CPU Kühler:
Scythe Mugen 2 Rev. B, CPU Kühler für Sockel 1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Hersteller      Scythe
Modellbezeichnung      Mugen 2 Rev. B
Material Kühlkörper      Kupfer / Aluminium
kompatible CPU Sockel      1366/1156/775/478/754/939/AM2/AM2+/AM3/940
Freigegeben bis (MHz)      alle Taktraten
Lüfterdrehzahl (U/Min)      1400
Geräuschentwicklung Betrieb (dB)      26,5
Abmessungen (BxHxT) (mm)      130 x 158 x 100
Gewicht (g)      870
Besonderheiten      bis zu 4 Lüfter verbaubar
mitgeliefertes Zubehör      Backplates
Schrauben
Installationsanleitung
Luftdurchfluss (m³/h)      126
Kühlung      aktiv
Cardreader:
Apacer AE700, Kartenlesegerät 30-in-1
intern, USB, Schwarz
Hersteller      Apacer
Modellbezeichnung      Embeded Card Reader AE700
Kartenleser Typ      30-in-1
Farbe (Gehäuse)      Schwarz
Anschluss      USB
Breite (mm)      101
Höhe (mm)      25
Tiefe (mm)      100
lesbare Formate
XD PictureCard      ja
mini-/micro SD      ja
SD Memorycard      ja
MultimediaCard      ja
Microdrive      ja
MemoryStick      ja
CompactFlash      ja
OS:
Windows 7 Professional 64-Bit System-Builder-Version
Windows 7 Professional 64-Bit System-Builder-Version, EnglischHersteller      Microsoft
Art der Software      Betriebssystem
Datenträger      DVD
Lizenz (Anzahl PC's)      1
Softwareversion      OEM
Produktaktivierung erforderlich      ja
2 x eSATA als PCIe:
Delock Controller Karte 2x eSATA, 2xSATA, 1x IDE
2x intern SATA oder 2x eSATA Spezifikation
1x intern PATA IDE Spezifikation
Datentransferraten:
SATA II bis zu 3 Gbps
PATA bis zu 133 Mbps
PCI Express x1 Standard
Unterstützt PCI Express 1.0a Spezifikation
Unterstützt bis zu 2 HDD am SATA, sowie 2 HDD am IDE Controller
Unterstützt Native Command Queue (NCQ)
Raid 0, 1
Festplatte:
2000GB Western Digital RE4-GP (WD2002FYPS)
3,5", Serial-ATA/300 (3Gb/s), 64 MB Cache
Hersteller      Western Digital
Modellbezeichnung      RE4-GP (WD2002FYPS)
Festplattenkapazität (GB)      2000
Bauart      intern
Formfaktor (Zoll)      3,5
Schnittstelle      Serial-ATA/300 (3Gb/s)
Umdrehungen / Min.      5.400 - 7.200 (dynamisch je nach Auslastung)
Geräuschentwicklung Betrieb (dB)      29
Geräuschentwicklung StandBy (dB)      25
Max. Transferrate (lesen) MB/s      110
Zugriffszeit (ms)      8,9
Cache (MB)      64
MTBF (h)      1.200.000
Gewicht (g)      730
Abmessungen (BxHxT) (mm)      101,6 x 26,1 x 147
Besonderheiten      Energiesparende Green Power Festplatte
Please have a look at my system and give me ideas how I could eventuially improve it.
regards

I agree completely with Harm. A 550W PSU of average (or middling) quality like the one that you have (which, by the way, is based on a CWT PSH or PSH-II platform) is not quite enough to power a power-hungry CPU like the i7-950 of yours, especially if a better-performing GPU such as the the GTX 560 Ti that Harm suggested is added along with two or more additional hard drives. (Your system currently has exactly two hard drives, which is the absolute minimum that you should have in an editing system unless you want performance to be slower than an old Pentium 4. However, one of those hard drives spins at only 5400 RPM - far from ideal for an editing system. You really want all of the hard drives inside that system to spin at 7200 RPM.)
Speaking of the GTX 560 Ti, you don't need the one with 448 cores since a non-overclocked (read: stock speed) i7-950 can't take full advantage of that higher-end GPU (and please note that the GTX 560 Ti 448 is actually a GTX 570 with one of its shader units disabled whereas the standard GTX 560 Ti is a different chip altogether). The standard GTX 560 Ti, with its 384 CUDA cores and a 256-bit DDR5 memory bus width, would suffice. However, if you do wish to overclock the i7-950 (to at least 3.8GHz), then the 448-core edition of the GTX 560 Ti would make more sense. (The 9500 GT that you currently have is not only old, it's slow and weak as well: It has only 32 CUDA cores, and it uses really, really crummy DDR2 RAM with only a 128-bit memory bus width. Such a card would have made the GPU-accelerated mode significantly slower than software-only mode during certain operations within CS5.x.)
By the way, I was wrong six months ago about the Dell systems sold during Fall 2011 that came with a 1.25GB version of the GTX 560 Ti: I had assumed that that card had 448 cores. Well, I did more research, and discovered that there was an OEM version of the GTX 560 Ti which did use a 320-bit DDR5 memory bus - but it had only 352 CUDA cores. It uses the same GPU as the GTX 570 and GTX 580, but with only 11 of its 16 shader units enabled, making it a GTX 570 with four of that GPU's shader units disabled. The Dell version of the GTX 560 Ti is, indeed, only a 352-core unit that was based off of a GTX 570. That made the Dell GTX 560 Ti expensive for what it is - at around $300, it cost as much money as the 448-core version of the GTX 560 Ti sold for around that time.

How install Email account for @spray.se on N95 ?

Have yesterday updated the software in my N95
My connectio to my email account disappeared in the action.
I have only 2 choices: POP3 and IMAP4. I would need a HTTP.
How do I get around?

To change iCloud accounts you have to go to Settings>iCloud, sign out, then sign back in with your other ID to create your new account. If you want to migrate a copy of the iCloud data to the new account, start by saving any photo stream photos that you want to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save Image. If you are syncing notes with iCloud that you want to keep, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account. Then go to Settings>iCloud, tap Sign Out, choose Keep on My iPhone and provide the password to turn off Find My iPhone when prompted. Then sign back in with your new Apple ID to create your new account and choose Merge to upload the data to your new account. Once you are on a separate account you can go to iCloud.com and delete your husband's data from your account (and he can do the same with yours).
Just be aware that the current @icloud.com email address cannot be moved to the new account, nor can the current my photo stream album (which is why you need to save any my photo stream photos you want to keep to your iPhone before signing out of the existing account).

Is Ciniform still the way to go for editing HD on Premiere CS4?

Hi all,
I may have a opportunity to edit an inde film shot in on P2 HD 1080p. However, i have a few questions....
0. can Premiere CS4 read and edit MXF files?
1. I'm not sure if my Premiere CS4 system will handle it natively without using an intermediate codec like Ciniform. The files have already been transfered to an external drive which i will then transfer to my systems' video drive. The following is my current system configuration:
. Premiere CS4
. Windows 7 x64
. 12gb of DDR3 ram
. Intel 920 quad core processor
. 1tb (2x500gb) video drive
. 1tb (2x500gb) storage drive.
2. The client is not sure the frame rate the video was shot in, either 24p or 59p. Is there a way to determine the correct frame rate so i can select the proper preset in premiere? I may be able to use VLC to view the codec information.

nados wrote:
Thanks, that's good to know.
Now i just have to figure out how to get paid for editing this indie film. They called asking me to edit it now and get paid later - yea right!
Get paid before you deliver it.

QM notification blocked for editing

Hi,
My user is saying that " SAP Quality Notification QN 1233456 has been blocked from editing for a few days. Please release this QN for editing".
Can any one suggest me what is the errror. How should release this for editing.
Thanks

Hi Aditya
please check and let us know the status of Quality Notification.
regards
Srinivas

How does a user take an iTunes home movie and convert it back to iPhoto(slideshow) for editing and emailing?

How does an user take an iTunes home movie and convert it back to iPhoto(slideshow) for editing and emailing?

iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera

How do i use existing email address for digital editions

how do i use existing email address for digital editions

Three possibilities.
1) If you already have an up to date Adobe account with associated email, you need to register it with ADE.
menu/Help/Authorize Computer (Library/Authorize Computer on the older more reliable v1.7.2).
2) If you already have an Adobe account/ID and have books that have been bought using it, then you should change the email associated with that account.
Login at the adobe.com website ('sign in' near top right), using the old email the account is currently associated with.
(Doesn't matter if this is no longer valid as an email address, it is still valid to access your Adobe account)
Choose 'My Information' on the 'Welcome' dropdown, enter your new email in the appropriate place, and confirm changes.
You will later need to validate that new email address by clicking on the confirmation email it will send.
Then follow step 1.
If you have an old account and the email is no longer valid and you've forgotten the password, try Adobe Live Chat to get access to the account again.
3) You need to create yourself a brand new account.
Click the 'sign in' and choose 'Dont' have an Adobe ID'.
Once you have established oe, go to step 1

Work flow? How to link multi-cam sequences for DVD output?

Pr cs4 (very new)
Still taking baby steps each day... please take my hand and help me!
Final output will be 2 DVD's (each DL) each about 2 hrs. Content are chamber music student groups in two recitals.
I have assets from two camera angles. I have successfully practiced on one of the groups performance (10 min.) following the steps illustrated in a multi-cam tutorial. http://www.adobe.com/designcenter/video_workshop/?id=vid0234
This leaves me with a great multi-cam sequence for that group located in the Project Panel, exactly what I want.
Now, I want to know what is the best method (workflow?) to ultimately produce a DVD containing about 10 of these type performances (one after the other) with chapter markings for each group, titles etc.?
I have yet to use Encore and I'm guessing that is where I'll send the finished edit for DVD production, though I don't know at what step I jump there?
Do I try to create one very long multi cam sequence of all the content, then send to Encore? Or can I create seperate multi-cam sequences (each performance) then link them together, adding transitions and make the DVD? This would be my preference to keep things more manageable, especially with audio synching.
With my practice multi-cam sequence on the timeline, I tried to drag the same sequence from the Project Panel to the end of the timeline to simulate how this would work, but it does not add to the timeline as a clip would.
This is probably childs play for you pro's, but we were all baby's at one time...I just happen to still be one!
Thanks for your patience and advice,
Kenny

Yes I did...now toss me a cookie please.
I am trying to quickly get up to speed in Pr CS4 to get this project completed. In the process, I'm trying to learn and understand the interface and correct terminology so as to make my questions intelligible to a community that posses vastly greater understanding than myself.
Is there anyone who can help with my main question at hand? Namely, how to go about creating a full length sequence (in the timeline) made via the nesting of synchronized multi-camera clips within a new "multi-cam sequence"?
As I said, I have completed a small test sequence in this fashion, nesting clips in a new sequence then using multi-cam monitor to record cuts. Now I need to add about 10 more of these together in a completed sequence to then send to DVD production.
Is this intelligible?
Thanks, Kenny
__0
_ \<,_
Date: Wed, 4 Nov 2009 09:11:06 -0700
From: [email protected]
To: [email protected]
Subject: Work flow? How to link multi-cam sequences for DVD output?
please take my hand and help me!
Well, at least you had the gumption to admit that up front.
>

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com

HT2486 How can I send an email to all of the email addresses associated with one contact? Similarly, in regard to group lists, how do you include for distribution all email addresses associated with each contact in the group?

Often times there are multiple email addresses associated with a single contact in address book. How can I included all of these email addresses when creating an address book group?

Don't be surprised.
Apple offers free, basic Mail and Address Book apps and creates paid, more sophisticated solutions, also allowing Developers to provide more sophisticated solutions for sale in the marketplace.
When I need to repeatedly email to multiple contacts, I create a blank draft email, and use the Address Book button to list the appropriate address book group. With the Address Book window open, it's easy to click to add multiple email addresses for a single contact name. Each is added to the message email address list. Then I save that blank email to iCloud Drafts, and it retains the email addreses I've entered. Next time I need to send a message I double-click on it in Drafts to open it, and drag it to one of my other email accounts to add Subject and details, then send from the other account.
Message was edited by: kostby

I converted a PDF document to word. How do I unlock this document for editing?

How do I unlock a document for editing if it is in read only form?

Hi buklova,
Is it happening with this file only or with every files?
Would you send your PDF document to [email protected] as an email attachment?
I will check it from my end.Please add the link to this forum post for reference.
Regards,
Florence

The email address assoc. with my iTunes account is no longer valid. can't access it. need to change it in iTunes but can't access account. even my birthdate is incorrect in iTunes...so can't log in. any suggestions on how to log in and edit info???

the email address assoc. with my iTunes account is no longer valid. can't access it. need to change it in iTunes but can't access account. even my birthdate is incorrect in iTunes...so can't log in. any suggestions on how to log in and edit info???

There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
https://expresslane.apple.com/Issues.action

How to email sequence for edit

Similar Messages

Maybe you are looking for