How to embed a report in a web page?

Hello,
I want to have my users just go to a web page and bring up their reports. I don't want to spend $7,000.00 on Crystal Server when I only have 5 reports the users need.
Is there a way to just embed a control or something into a web page? Maybe even use an older version and the RDC component?
Thanks.

See my reply on the following thread;
Do I need to buy an old version of Crystal Reports to put reports in browse
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Similar Messages

How to embed a .vi as a web page on a remote server

I use a remote server running a Plone content management system application to allow remote users connect via the internet and store data files (delimited text files) for later analysis .
I am using Labview 7.0
I wish to change our current data analysis process:
the process now:
1) go to the web site via an internet connection (this is a site served by a remote 3rd party server running a Plone instance)
2) download the data to a local PC
3) run the data analysis .vi on the local PC (the .vi prompts the user for the location of the data file, the user browses to the location on the local hard drive and then the .vi graphs the data and generates the results)
the desired new process:
1) using a smartphone or similar web enabled PDA go to the web site where the user can remotely control an embedded data analysis .vi
2) the remotely served .vi prompts the user for the url location of the data file and then the .vi graphs the data and generates the results
My questions:
A) How do I get the data analysis .vi loaded onto the remote server? (I just don't see how to do this with the web publishing tool, maybe it is not possible?)
B) Will the remote server require other software such as Labview RTE?
Thanks,
Bernie

Bernie,
I would install and configure an FTP-Server on the computer that runs your analysis.VI.
Users can upload data via FTP to that computer. (That way, they should know the absolute path to that file.)
Enable your analysis.VI to read data from the local disk.
Make your analysis.VI a remote panel and configure LabVIEW WebServer options accordingly.
Users now can connect to the remote panel and specify which data file the remote panel should read.
The remote panel then generates the results and displays them on the front panel.
Does it match your demands?
Guenter

How to embed HTML5 video player in web page

I have developed a video player using html, javascript and jquery. depending upon the browser type and mobile/non-mobile device, it creats the html5 video tags or redirect to a fall back flash player). I am using Adobe media server
this player works well on all the browsers.
videoplayer.html
<!DOCTYPE html>
    <html>
       <head>
</head>
<body>
<video controls="controls" poster="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360">
          <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.mp4" type="video/mp4" />
          <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.webm" type="video/webm" />
          <source src="http://clips.vorwaerts-gmbh.de/big_buck_bunny.ogv" type="video/ogg" />
                    <object type="application/x-shockwave-flash" data="http://releases.flowplayer.org/swf/flowplayer-3.2.1.swf" width="640" height="360">
                    <param name="movie" value="http://releases.flowplayer.org/swf/flowplayer-3.2.1.swf" />
                    <param name="allowFullScreen" value="true" />
                    <param name="wmode" value="transparent" />
                    <param name="flashVars" value="config={'playlist':['http%3A%2F%2Fsandbox.thewikies.com%2Fvfe-generator%2Fimages%2 Fbig-buck-bunny_poster.jpg',{'url':'http%3A%2F%2Fclips.vorwaerts-gmbh.de%2Fbig_buck_bunny. mp4','autoPlay':false}]}" />
                    <img alt="Big Buck Bunny" src="http://sandbox.thewikies.com/vfe-generator/images/big-buck-bunny_poster.jpg" width="640" height="360" title="No video playback capabilities, please download the video below" />
          </object>
                    </video>
</body>
    </html>
============================================
If I embed this video player in any of the aspx page using <EMBED></EMBED>, the redirection to flash player does not happen.(it works fine on chrome and safari but not on IE and firefox)
<EMBED height=360 width=250 src="http://localhost/videoplayer.html"></Embed>

I used <object> to make it work in IE and Firefox
<object type="text/html" data="http://64.165.34.7:8134/videoplayer.html?size=1&playlist=2" style="width:460px; height:260px"></object>

Embed BI website into a web page using an IFRAME tag in HTML

Hi
I have got a requirement below.
# Embed BI website into a web page using an IFRAME tag in HTML
(Build a webpage and provide the links to BI Dash Board (10 reports))
How to start and where to add the code and Is there any code available?
Please help me out.

Thank You for reply.
I have created a website with dashboard links by using IFRAME tag .As of now there is no security restriction since it was POC for two reports.
My question here how to Provide a link directly to BI public website from a web page on client site(Assume in gmail for example)

Embed Input schedule in a web page in BPC NW 7.0 SP 04

Hi All,
Is it possible to embed an Input Schedule in Web Page?
I've created a .htm file of the input schedule by saving it as 'web ready' file. However, when I preview the web page, html for the input schedule is displayed.
If embedding is not supported, then is it possible to provide a 'link' for the input schedule in the web page. When the user clicks on the link, BPC for excel should be launched and selected schedule should open.
Thanks in advance.
Regards,
Meera

Thanks all for the response.
We have lot of workbook logic and macros involved in our input schedule. My understanding is that we cannot replicate the same in Live Reports. Hence the thought to integrate the input schedules to a portal.
Is this funtionality available in NW 7.5? or in any future release?
Appreciate your inputs.
Regards,
Meera

Embedding WebI and Crystal reports on a web page

Hi,
I'm new to BO, so please bear with me. I've also posted this to the .NET-side, so sorry if you've seen this post before.
We have a project where we will need to embed WebI and Crystal reports on a web page, i.e. we want the people who access the web page to get the reports (mainly graphs) as embedded content on the web page without any controls and other clutter.
Is this possible and what's the correct way of doing this?
Thanks,
Carl

Hi,
Thanks for the help!
We still face the original problem, though. I.e. with openDocoument we get the report, controls, tab selections, scroll bars etc. What we actually would like is to get just the contents of a report.
Is there any way of doing it? We're not afraid of coding, we have good developers. Or do we need to schedule report creation to some format (e.g. PDF) and then load the PDF to the web page?
Basicaly it's more important to get this working for WebI reports as we can redo almost all reports from Crystal to WebI. Of course we are happy to find a resolution for both cases.
Br,
Carl-Gustaf

How do I enlarge the font on web pages

how do I enlarge the font on web pages so that it stays that way all the time

Funny thing today Thomas,
Someone had a link to your site which you mentioned your first virus, the WDEF, and I chuckled as we both had the same experience all these years.
Anyway Thomas, I call it as I see it and like any IT professional, use the best tool for the job.
Did you know Steve Jobs used Linux on his renderfarm at Pixar?
So really what the problem is people's sensibilities, which they shouldn't be worried about because like IE, because of Safari being included on hardware, automatically is the first browser of choice and in no danger of losing market share on Apple hardware.
However if Safari isn't quite cutting the mustard for a particular person's needs, like this person's situation, they should be informed of a alternate solution.
Safari doesn't have nearly the amount of customization as Firefox nor the zillions of add-ons to solve just about any issue.
If people decide not to take my advice that's their choice, and they choose not too, but likely, just in this case, will come to realize the same problem I had with increasing Safari's text size and distortion of web pages.
Soon as Apple starts paying attention to their needs of their hard of seeing customers better, like myself and others, then I will most certainly recommend Safari over Firefox.

How can i see visitor statistics for web page hosted on osx lion server

Hello
how can i see visitor statistics for web page hosted on osx lion server
Thanks
Adrian

Just click inside the url address bar. Full url address highlighted, will appear.
Best.

HT4356 How can I airprint part of a web page?

How can I airprint part of a web page using iPad and Safari?

Copy (or cut) the area you want to print, and paste it in to a new document.
Or take a screen shot (by simultaneously holding Shift + Command + 4 keys) of the area you want to print, then print the resulting screen shot file (which appears on your desktop).

Best Practices Question: How to send error message to SSHR web page.

Best Practices Question: How to send error message to SSHR web page from custom PL\SQL procedure called by SSHR workflow.
For the Manager Self-Service application we’ve copied various workflows which were modified to meet business needs. Part of this exercise was creating custom PL\SQL Package Procedures that would gather details on the WF using them on custom notification sent by the WF.
What I’m looking for is if/when the PL\SQL procedure errors, how does one send an failure message back and display it on the SS Page?
Writing information into a log or table at the database level works for trouble-shooting, but we’re looking for something that will provide the end-user with an intelligent message that the workflow has failed.
Thanks ahead of time for your responses.
Rich

We have implemented the same kind of requirement long back.
We have defined our PL/SQL procedures with two OUT parameters
1) Result Type (S:Success, E:Error)
2) Result Message
In the PL/SQL procedure we always use below construct when we want to raise any message
hr_utility.set_message(APPL_NO, 'FND_MESSAGE_NAME');
hr_utility.raise_error;
In Exception block we write below( in successful case we just set the p_result_flag := 'S';)
EXCEPTION
WHEN APP_EXCEPTION.APPLICATION_EXCEPTION THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
WHEN OTHERS THEN
p_result_flag := 'E';
p_result_message := hr_utility.get_message;
fnd_message.set_name('PER','FFU10_GENERAL_ORACLE_ERROR');
fnd_message.set_token('2',substr(sqlerrm,1,200));
fnd_msg_pub.add;
p_result_message := fnd_msg_pub.get_detail;
After executing the PL/SQL in java
We have written some thing similar to
orclStmt.execute();
OAExceptionUtils.checkErrors (txn);
String resultFlag = orclStmt.getString(provide the resultflag bind no);
if ("E".equalsIgnoreCase(resultFlag)){
String resultMessage = orclStmt.getString(provide the resultMessage bind no);
orclStmt.close();
throw new OAException(resultMessage, OAException.ERROR);
It safely shows the message to the user with all the data in the page.
We have been using this construct for a long time for all our projects. They are all working as expected.
Regards,
Peddi.

How to call a report from a web application

Hi,
I have a web server in wich is installed Reports 6i. My question is how can I call reports 6i to generate a pdf using a .rep file from my web application (built with java)?

Hi,
The below link will be very useful for one who need idea on calling Oracle Report from Java Application,
http://www.oracle.com/technology/products/reports/htdocs/getstart/examples/reportswebservice/index.html
Thanks & Rgds,
M T

How to embed multiple queries in one web template

Hi,
I've a requirement wherein I need to embed two queries in one web template. The first query displays order quantity from a particular customer and the second query displays other information for that customer. Most of my web templates i've contains only one query which i've created using 0ADHOC template saving this as diff template and modifying it. But this is the first time I have got this type of requirement wherein the user drills down on a particular customer for order quantity and then goes for other information from other query.
Does anyone out there has any idea or suggestion as to how to do this ? One more thing I need to pass the values from one query to another which is akin to RRI concept while staying in the same web template.
Your suggestions/advices are highly appreciated.
Thanks in Advance,
Rash.

Hi Rash,
You can do this by including 2 table web items in your template and assiging the 2 different queries as different dataproviders to each. You can try to create a drop down box to filter the customer and in its properties set DataProvider1 and DataProvider2 as the affected data targets.
Hope this helps...

How to Run Oracle Reports from the web.

How can we run Oracle Reports from the web - for example from a portal such as "Gateway"
This is a univeristy that implements Banner - so can we run them from within Banner?

Yes, of course. And for running the reports-server you need an OAS. Maybe here is a good starting point http://www.oracle.com/technology/documentation/reports.html

How to call Oracle Reports via Java Web Application ?

Dear All,
I have developed a web reports using Oracle Reports 11g and would like to display these reports via Java Web App that will call them.
Kindly help me in this matter.
Regards,
Irfan

i will go as John suggested.........Construct a URL with required parameters and call it using goLink component
make a configuration in Report server and
http://myServer:myport/reports/rwservlet?config=myconfig&destype=cache&desformat=PDF&report=myreport.jsp&myparameter=myvalue

Invoking a Discoverer Report from a web page written in JSP

Hi,
We are using Discoverer 10.1.2 against a relational database. We are not using the OLAP option.
I have a requirement wherein users would like link to a Discoverer Report from a web application which is not deployed in Oracle Portal. So Discoverer portlets are not the solution.
I basically need to be able to provide the Report URL in the JSP page.
Has anybody done this ? Can you please provide some pointers towards how to generate the Discoverer report URL to invoke the report from a JSP ?
Thanks
Manav

Discoverer URL parameters can be found here in the Configuration Guide here:
http://download.oracle.com/docs/html/B13918_03/urlstart.htm#sthref888
Note, that you cannot pass the password in the URL (security restriction) so you will need to use Public or Private connections and pass the connection ID or use an HTML form to build the URL using the POST method.
Or, you can fill in the desired fields and let the user enter their username/pwd.
Hope that helps get you started.
Regards,
Steve.

How to embed a report in a web page?

Similar Messages

Maybe you are looking for