How to embed audio into an image?

Hi there,
I'm trying to embed audio into an image so that clicking on the image plays the audio. I've tried adding a behavior to the image but it doesn't seem to work. Any thoughts?
Denbeck

You might be able to do something convoluted and complicated with JavaScript. The HTML4 standard is designed around text, not movies and audio. So I actually wouldn't expect DreamWeaver to be able to do this.
If you don't have Flash, You should look online for FREE or reasonably priced Flash Slide Shows. There are dozens of them, and some can play audio while showing a picture.
Otherwise, if you do have Flash, someone on the Flash forums could probobaly give you a couple lines of action script code or a quick flash tutuorial and you will be done in no time.
So to answer you question. You can't embed audio into an image with DreamWeaver, or any other HTML editor for that matter. Your best option is to use Flash.

Similar Messages

How to embed audio into file for export to pdf

Hello, I've transcribed a two-hour lecture and copied it into Indesign. I would like to create a pdf with the audio of the lecture embedded in it so that when the reader clicks on a paragraph or a button the audio for that particular sentence or section starts up. The point is to allow the reader ready-access to the audio that corresponds with the transcript. Ideally the reader could click anywhere in the text and the audio would start there. Does anyone have any suggestions for making this kind of document? much appreciated.

no pardon necessary! i need to embed the audio file because it contains the original lecture, that's what I want the reader to have access to while reading the transcription, since the transcription is not meant to substitute for but rather supplement the audio. for example, in the transcribed text I have put "[...]" for segments of the recording that are inaudible. If I put the original audio into the file then the reader has the option of going to that specific section and listening to it themselves. basically i want to create a pdf document of a lecture. I want to be able to highlight important parts of the lecture, search the lecture for key-words, and scan it quickly for specific items of interest, but I also want easy access to the original audio because tone of voice isn't translatable into text (and the tone of voice in this case is important for meaning), and because there are many segments that I couldn't hear, so I'm trying to figure out the best way to link sections of the text to specific sections of the audio.

How to embed audio to my website using quicktime when I get "file not found

hi,
i've been trying to embed audio into my website all night and I get a file not found message even though I;ve checked 100 times and all files are where links say they should be..
but even just linking to audio (mp4) files won't work...
everything is o.k. with non-audio links on my website - only the mp4 audio can't be found.
can anyone help me? or post the correct code?
I've tried using these formats..
<EMBED SRC="anymovie.mov" HEIGHT=176 WIDTH=136>
<embed
src="http://www.crossandthrone.com/.samples/qt/sample-reference2.mov"
width="242" height="199" autoplay="false" loop="false"
controller="true" bgcolor="#666666"
pluginspage="http://www.apple.com/quicktime/"></embed>
the pages that should play audio just have a quicktime file with a question mark on them
help would be much appreciated!

Start here:
http://www.mediacollege.com/video/streaming/
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"subdued2u" <[email protected]> wrote in
message
news:gbg2th$r13$[email protected]..
> Hello ,guys, i have a website,, and i would like to add
upload vidoes on
my
> website i have tried but did not work can anyone please
tell me how to
embed my
> videos in my website using dreamwever ?
> thank so much
>

How to embed music into adobe muse

I wanna make a website for a musician and I'm wondering how to embed mp3 songs on the website.
Thanks

Hi ritasaluix,
Please refer to the following threads:
Re: How to add audio into Muse (not in the background)?
Re: how do i embed audio (mp3) in muse?
Regards
Sonam

How to embed html into keynote

I want to embed the youtube code for a vid into my keynote presentation so when I export to flash I can post the entire thing online, the presentation will work and I can watch the vid too. Any thoughts on how to embed html into a keynote page?
Thanks,
Jeremy

The only way to get video out of Keynote that I know of, is the QuickTime export. Now, if you use another tool after that (to convert the QuickTime video) that might be able to work for you.

How to embed excel into a region on portal AS

How to embed excel into a region on portal AS??
Any suggestions will be appreciated...

Hmm. topic is from 2005. But havent they gotten something better than iframes since 2005??? I find iframes not flexible enough to paste in portlets, made by, say mod_plsql into a article publisher tool.
For example, I want to make an article using my companies article publication tool (Intranett publisher) saying..
Blah blah blah
If you look at the table below u see the current data updated every hour:
<iframe call to portlet with data>
This data is blah blah blah etc
When I use iframe I have to set the size (I dont know how big table will be in the future), and get ugly borders with scrollbars if I dont set size right. Isnt it any better code out there yet? Hopefully as easy as embed pictures from the outside.

How to get audio into Adobe Premiere Elements 12?

How to get audio into Adobe Premiere Elements 12?
I have filmed an air show with a very good camera JVC pro
And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
I think I tried everything for 4 days now.
Sound in my computer works perfectly
I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
I have checked the sound card.
Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
It's not normal if you will keep on producing audio for over 4 days at Adobe
The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
My name is Thore Hult
live in Karlshamn in Sweden

Thore Hult
On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
For your immediate problem.
What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
for your Audio Name and Status.
http://www.headbands.com/gspot/
The other properties of the file there would also be of interest.
When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
If so, do you wait for it to complete before you move forward in the project?
Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
Can we assume that your troubleshooting has included checking
a. Volume control within the project
b. Edit Menu/Preferences/Audio Hardware ASIO
Let us start here and then we can decide what next if necessary.
Thanks.
ATR

How to embed audio clips into pdf document

Hello I have a two-hour lecture I've transcribed. There are about 20 paragraphs. I want to embed the audio of the lecture into the pdf document so that when the reader clicks on a paragraph or on a button/control near the paragraph the audio for that particular paragraph starts up. An ideal version of this would be in pdf format and would allow the reader to click anywhere in the pdf and have the audio start from that point. I've never embedded audio before. I also have InDesign, Lightroom and Photoshop and can use them to embed audio before exporting to pdf.

The exact process will depend on the version of Acrobat you have. In AA7, I just selected TOOLS>Advanced Editing>Sound Tool and added a sound file to the document. There were options for AA5 and AA6 compatibility as well as for embedding the sound file in the PDF.
When you select the sound file, it asks if you want to play the file or accept the file as trusted for future requests. The file then played just fine. When I added the link, I was given a box to use to surround the area of interest on the page. You can set the border color and such (like make it invisible, though that might confuse folks).
I am not sure what more you want. It is possible to add audio to open when you open the page also as well as set timing for the page. That would provide a way for the person to essentially have a lecture presented on your system without having to intervene. For the playing of the pages and timing, you may ahve to have the file open in full-screen, not sure.

How to embed information in an image

im trying to add text to an image without it displaying on the image. basically i need to know how to embed text in a jpeg. currently im trying to send information by adding data to the least significant bit but to no avail.
any help will be much appreciated. thanks.

heres how it went kevin
i loaded an image. the image data is a cluster. by using unbundle by name i can separate it to components. the rgb info on the data is located in "image" in the unbundle. send this to a decimate...extracting 3 values. these three values are the rg and b components of the image. the rest is as i mentioned above. take either r,g or b value (doesnt matter which color you encode the data to) do a string to byte array. send through an empty for loop with the string length wired to the count...making the loop run as many times as the number of characters ur embedding. the result is sent to replace array subset (with index 0) and then interleaved with the remaining 2 channels to form back the composite rgb...send back to a bundle by name with the characteristics coming from the original image data. draw flattened pixmap and output (this displayed pic with encoded data...no difference!!). extraction is a reverse process but inside the forloop place index array with index zero. loop count once again wired to original string length. output from the for loop goes to a byte to string and string indicator! let me know if it works for you
dee.

How to embed font into generated PDF?

Hi,
I have an issue with cyrillic fonts in PDF-file, generated from smartform using the following mechanism:
1. Run FM for smartform with ==> getotf = 'X'
2. Perform CONVERT_OTF retrieving result into a XSTRING.
3. Converting xstring content into a table using "cl_document_bcs=>xstring_to_solix).
4. Creating mail to an external internet user with attached pdf ==> using "cl_document_bcs=>create_document..."
Smartform contains cyrillic content, based on HELVCYR (Helvetica cyrillic) font. Application server is based on Windows.
Everything worked well (for months!) for allmost all of the clients of our customer. Of course, some of clients have different OS-es (such as Linux, Mac OS, etc.), and then the problem starts - they doens't view properly the cyrillic content. English content (even numbers, etc.) are properly displayed. We found what fonts are used in the PDF, but my questions are:
1. Is it possible to embed the font into generated PDF-content?
2. If no, is it possible to generate PDF-content non-selectable (i.e. in some image mode) ?
If yes, how to do this?
Or is there any other way to workarround this issue - to be able to display mail with attached PDF-content with cyrillic on different OS-es? It would be better if it is possible without calling external converter...
Any help would be highly appreciated.
Thanks in advance.
Regards,
Ivaylo Mutafchiev

Hello Ivaylo Mutafchiev,
There is no way we can control the fonts in the created PDF / while creating the PDF using the class cl_document_bcs in your PDF creation logic.
You can try some other approach of creating PDF from the Smartforms OTF stream data .
Try using the follosing FM for the PDF creation and sending email:
CONVERT_OTF_2_PDF
CONVERT_OTF_AND_MAIL
SO_OBJECT_SEND
CONVERT_OTF_AND_MAIL_NEW (Try this but this FM still uses the class that you are using currently. But give it a try and see the results)
Hope this answers your question.
Thanks,
Greetson

How to embed font into PDF - Listener 2.0.2 FOP configuration

I need to embed custom font into PDF report in order to print one of Slovenian characters: Č (C with caron) This character shows as # sign when I generate standard PDF report using Apex 4.2.2 and Listener 2.0.2. As far as I understand 14 native Adobe PDF fonts are based on Windows 1252 encoding. This encoding doesn't include mentioned Slovenian character.
Oracle White paper http://www.oracle.com/technetwork/developer-tools/apex/learnmore/custom-pdf-reports-1953918.pdf says:
"APEX Listener 2.0.2 supports only the Base-14 fonts. To configure additional fonts, see this document: Apache(tm) FOP: Fonts "
I was able to embed my custom font into standard Apache FOP report server. Solution consist of saving two files my_font.ttf and my_font.xml to server and update of FOP userconfig.xml file (fonts part where path to saved 2 files have to be specified)
How can I do this on Apex Listener 2.0.2 ? Where is located userconfig.xml file?
Simon

Hello Ivaylo Mutafchiev,
There is no way we can control the fonts in the created PDF / while creating the PDF using the class cl_document_bcs in your PDF creation logic.
You can try some other approach of creating PDF from the Smartforms OTF stream data .
Try using the follosing FM for the PDF creation and sending email:
CONVERT_OTF_2_PDF
CONVERT_OTF_AND_MAIL
SO_OBJECT_SEND
CONVERT_OTF_AND_MAIL_NEW (Try this but this FM still uses the class that you are using currently. But give it a try and see the results)
Hope this answers your question.
Thanks,
Greetson

How to embed BARCODE into smartform ?

Hi All,
     I have a requirement to embed an EAN-128 barcode for handling unit(EXIDV) and other fields in a shipping label(smart form).please let me know how should I send the value for these
·       start code
·       FNC1
·       application identifier
·       data
·       checksum
·       stop code
Parameters?
I have created a Z-Barcode format with Bar Code Symbology: Code 128 and I am planning to use it to create EAN128 format is it correct?

Hmm. topic is from 2005. But havent they gotten something better than iframes since 2005??? I find iframes not flexible enough to paste in portlets, made by, say mod_plsql into a article publisher tool.
For example, I want to make an article using my companies article publication tool (Intranett publisher) saying..
Blah blah blah
If you look at the table below u see the current data updated every hour:
<iframe call to portlet with data>
This data is blah blah blah etc
When I use iframe I have to set the size (I dont know how big table will be in the future), and get ugly borders with scrollbars if I dont set size right. Isnt it any better code out there yet? Hopefully as easy as embed pictures from the outside.

How to Embed ALV into viewcontainerUIelement Programatically in Webdynpro

Hi Experts,
I want to embed an ALV into viewcontainerUIelement programatically, i.e, I create the ViewContainerUIelement at the runtime and embed an ALV at runtime. Is this possible? If yes then how.
Regards,
Biswajit

Hi ,
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80a3de18-ee00-2d10-bfb3-946d7e00fd91]
Please refer to this article for dynamic alv with code.
regards
Kuldeep

How to capture audio into buffer

i currently doing a voip apllication using SIP as the protocol
since the j2me now doesnt only have the jsr 180
its not enough to support voip call
wat i wan to do is capture d audio then put in buffer then send out through d socket to another client and its automatically plays it
can this work?
its seen like converting the text conversation into voice conversation
but sadly i dont know how to implement the real-time voice conversation
can anyone help me?

Hi,
you have to deal with OCCI Metadata. To start look here
http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14294/metadata.htm#BABFEDDJ
Regards,
Michael

How to embed data into an InDesign Document

Hello everybody,
I'm porting a QuarkXTension to InDesign CS3 on PC but, maybe, I've found a showstopper...
The current xtension writes some collected data into a document slug that is retrieved by an external application simply scanning the content of the file.
I need to maintain the same way with InDesign but I've discovered that the persistent data added to a document workspace doesn't stay all together when is more than few KBytes (everything seems to be ok until 2 KBytes but that's too little) inside the InDesign document but is scattered on many locations. Of course this makes the work of the external application impossible.
Is there any way to command/force inDesign to write the persistent data insidde the file in one single chunk?
I understand this is something unusual but that's the way that complex publishing workflow works and can't be changed in that part.
Thanks a lot in advance for any help.
Best regards,
Luca Severini

I think I have found a possible solution to embed my data in a way readable by an external application. To use the XMP toolkit.
Very interesting the fact XMP Toolkit includes the source of a simple command line tool that parses the xmp embedded into InDesign file.
The same source can be easily modified to get all the objects contained in the document aka database.
Bye
Luca

How to embed audio into an image?

Similar Messages

Maybe you are looking for