How to empty extraction queue (LBWQ)

Dear BWers,
How do we empty the extraction queue LBWQ?
Thanks
Raj

Hi,
For emptying the data from the extraction queue, run the collector pgms. They start with R...Then pull that data through delta infopackages so that the delta queue is also empty. But one thing is make sure there are no more transactions posted on the source system during this activity otherwise you'll get data in your extractor queue again.
Cheers,
Kedar

Similar Messages

How to fill the data in extraction queue (LBWQ)?

Hi,
I modified the structure of datasource 2LIS_02_SCL (change an append structure), since an error occurs when I check the datasource, I deleted the the deltaqueue in RSA7, before that, I also checked the extractorqueue, it was empty.
But when I excute OLI3BW to fill the extractor queue, it happens nothing.
How can I fill the data in extractor queue so that I can extract data from R3 to BW?
Thanks .
Regards

Whta u have done is Filling setup tables not the extractor queu......
Could you please tell whether ur load is delta load or Full load?
Khaja

HT1660 My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Than

My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Thanks, Tom

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

SRM Extraction Queue is filled Unnecessary -- to BI load

HI
We are running some data loads from SRM to BI .
We have a Strange Issue:
Without triggering process chains or Infopack groups in BI side, Extraction queues (SMQ1 TRFCs ) are filled with some entries. It will causes the SRM loads in a very slow manner.
Question is :
Why Extraction queues are filled in source sys - SRM without running Infopack/Process chain?
Is there any Background program running in SRM side?
What is the data flow behaviour in BI?
How to resolve this Issue..
And Mainly please let me know the reason?
Thanks in advance..
Cheers.
Sri

Hi,
Check whether you are Using Queued Delta or not in LBWE, and if your code working fin meanes you can get the corretc dat ain Queued delta aslo.
See the below article about the RSA7, SMQ1 etc...
Checking the Data using Extractor Checker (RSA3) in ECC Delta Repeat Delta etc...
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80f4c455-1dc2-2c10-f187-d264838f21b5&overridelayout=true
Data Flow from LBWQ/SMQ1 to RSA7 in ECC and Delta Extraction in BI
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/d-f/data%20flow%20from%20lbwq_smq1%20to%20rsa7%20in%20ecc%20and%20delta%20extraction%20in%20bi.pdf
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Thanks
Reddy

Help requires_A Safety Belt for Logistics Extraction Queues

Hi All,
I have read the Blog "A Safety Belt for Logistics Extraction Queues" and it is very useful for taking the backup data from Extraction Queue.
I have a set of Queues related to this BLOG.
1. Suppose, i have created the Backup table for the Particular Application (Ex 03).And i am scheduling the Job from the JOb Control of LBWE.Will it pull the data from Backup table or with the Standard Table. How can i pull data based on our needs.
Pls suggest on this.
Thanks,
Jelina.

Dear All,
Anybody has tried performing the Backup of LBWQ data in ECC. How to pull data from backup table to RSA7.
Pls suggest.
Thanks,
Jelina.

Urgent Entries for application 11 still exist in the extraction queue

Hi All,
In LBWE when i am trying to mainting structure its not allowing to add fields to ExtractStrucutre.
Following is the error iam getting.
Entries for application 11 still exist in the extraction queue ->
I have set the Update to inactive and trying to add fields to Extract strucutre .
Morover,
I have already deleted setuptable entries for this application Component 11 and i checked in rsa3, no records are there.
Regards,
C.V.
Message was edited by: P.C.V.

PCV,
Here are the steps. Make sure you do them when there is no posting going on.
1) Using transaction SA38, execute program RMBWV311. This will send the data from the extraction queue to delta queue for application 11.
2) Run your 2lis_11_***** info packages to bring the delta records into BW. Make sure to run these info packages twice because the delta is cleared on R/3 only if you run them twice. It is designed this way to accomodate the delta repetition functionality.
Just to make sure, verify that you don't see any data in RSA7, LBWQ and if you use RSA3, the system should not extract any data.
You should be able to change the extract structure now.
Abdul

BootCamp driver won´t work on my MacBook. How can I extract it from DVD?

Hi folks.
I´m new on BootCamp.
After installing Windows XP SPII, witch works fine for me, I tryed to install the BootCam drivers.
But: The Leopard DVD won´t start - like in the manual How can I extract the Drivers from the
Leopard DVD to copy them to the BootCam partition to install them manually?
Thank you al lot!

It is a known problem on Microsoft's end.
From their site:
"SYMPTOMS
Microsoft Windows XP Service Pack 2 (SP2) cannot read DVD-RW disks that use the Universal Disk Format (UDF) 2.00 defect management system. When you view the DVD contents by using Windows Explorer, you see an empty... ...A supported hotfix is now available from Microsoft. However, this hotfix is intended to correct only the problem that is described in this article. Apply this hotfix only to systems that are experiencing this specific problem. This hotfix might receive additional testing. Therefore, if you are not severely affected by this problem, we recommend that you wait for the next service pack that contains this hotfix.
To resolve this problem, submit a request to Microsoft Online Customer Services to obtain the hotfix. To submit an online request to obtain the hotfix, visit the following Microsoft Web site:
http://go.microsoft.com/?linkid=6294451"
I posted this in reply to another thread:
"It is a known Microsoft issue with UDF in some SP2 versions, and there is a hotfix for it.
search for this in Google:
"DVD-RW disks appear to be empty" hotfix
You can do it 3 ways:
1) If you run the Xp updater (which may take hours) and follow all the instructions, reboot and run the updater again... and again until all the updates are there, then you will get the fix.
2) Find , download and install just the hotfix... it may take some looking...
3) contact Microsoft from their site and get the hotfix from them. "

Extraction Queue - SMQ1 - entries..

HI All,
We are running some data loads from source SRM to BI .
We have a Strange Issue:
Without triggering process chains or Infopack groups in BI side, Extraction queues (SMQ1 TRFCs ) are filled automatically with some entries. It will causes the SRM loads in a very slow manner.
Question is :
Why Extraction queues are filled in source sys - SRM without running Infopack /Process chain?
Is there any Background program running in SRM side?
What is the data flow behaviour in BI?
How to resolve this Issue?.
And mainly please let me know the reason? This is an urgent issue.
Thanks in advance.
Cheers.
Sri

Hi,
can you check to which extractor the queue belongs and if somebody has performed a delta init for it.
As soon as you have a delta init, but do not fetch the delta, the queue will start growing. You either have to delete the delta init or schedule the delta load.
Best regards,
Ralf

Scheduling extraction queue deletion

I need to delete the extraction queue's content, before filling the setup table.
While I can schedule the setup job, I can't schedule a job for deleting the queue. I'd like to schedule both the deletion of an extraction queue and the setup job. The start condition for the setup job would be the end of the deletion job.
I'm annoyed at waiting midnight just for deleting the extraction queue with LBWQ...
But what's the name of the report for deleting a particular extraction queue (e.g. for application 13, invoicing)?
Cheers, Davide

I have at looked the source code of the RSTRFCM1 report, which is called when deleting a queue from LBWQ.
This fragment of code deletes a queue. It needs two input parameters: the queue's name and the destination.
REPORT zbw_extractqueue_delete .
PARAMETER: qname LIKE trfcqout-qname DEFAULT 'MCEX??',
           dest LIKE trfcqout-dest DEFAULT 'NONE'.
DATA sl_entry(96).
CONCATENATE sy-uname '&' qname ','
            dest INTO sl_entry.
CALL 'C_WRITE_SYSLOG_ENTRY' ID 'TYP' FIELD space
                            ID 'KEY' FIELD 'Q22'
                            ID 'DATA' FIELD sl_entry.
CALL FUNCTION 'TRFC_QOUT_DELETE_QUEUE'
     EXPORTING
          qname = qname
          dest = dest.
Cheers, Davide

Deleting extraction queue.

Hi,
we r upgrading our source system version from 4.6c to ECC6. before upgradaion taking place in production we have to update all the source system data to BW system. For that we have to update the data from extracting queueu to RSA7 .After updating have to delete the extraction queue.
My question is,
From where to delete the extraction queue ?
Is it from SMQ1? or LBWQ? i can see only one queue name in lbwq with MCEX11. where as i can see more than one queue name in smq1.
Wt is the differance b/w smq1 and smq2?

Hi
SMQ1 = RSA7 + LBWQ.
SMQ1 is outbound queue.
SMQ2 is inbound queue.
Regards
Sadeesh

Extraction Queue

Hi All,
Need a clarification about LO Extraction........
"if the update mode is queued delta..Then transactions will first go to Extraction
Queue and after the LBWE job runs they will be transfered from LBWQ to RSA7..."
Please correct me if my understanding is wrong.
Regards

You got it.

ERROR : Entries for application 13 still exist in the extraction queue -

Hi everybody,
While modifying extractor (LO Cokpit) I am getting this error.. I have deleted data through t.code LBWQ & LBWG still I am getting this ERROR,
" Entries for application 13 still exist in the extraction queue -> "
and it is givig the Diagnosis as below
Diagnosis
You are not allowed to change the extract structure MC13VD0ITM forapplication 13. This is because unprocessed entries are still presentin an extraction queue of application 13 for at least one client.
If an extraction structure is changed for which there are still openentries in an extraction queue, these entries can no longer be read andthe collective update terminates.
Please help me out..it is urgent...
Thanks in advance

Hi Sunita,
Do one things, to fix this problem, go to the BW for that info package, it seems
its already exists..if yes..delete the initialization request from the package
and come back to R/3 try to delete the application 13 and it will allow to make
the changes to the struc.
Hope it helps..
Need further help revert..
Assign points if useful..
Cheers,
Pattan.

How can I extract certain pages from my document and save as another file?

How can I extract certain pages from my document and save as another file?

You would need Adobe Acrobat to do that, not Adobe Reader.

How can I extract only the audio as an aiff file?

Using a Sony DSC-N2 Cybershot Camera I recorded video that was saved as “MOV01606.MPG”. The video plays back with sound in Quicktime Pro and iTunes but how can I extract only the audio as an aiff file?

Use MPEG Streamclip (free) to convert your .mpg files to QuickTime formats.
QuickTime can't extract audio from muxed file formats.

How do i extract annotated pages across multiple files?

I use Acrobat XI standard. I am a lawyer doing cases with multiple PDFs. I annotate the pdfs when a witness speaks to a page. How can I extract pages that I have made annotation on into a separate file?

Hi Charlie Manzoni,
Please refer this thread link (Converting a single 2 page doc into 2 separate 1 page docs ) where i have posted the procedure to extract pages from a pdf into a separate file.
Please revert back if you have any query or need any further assistance on this issue.
Regards,
Rahul Tyagi

How to empty extraction queue (LBWQ)

Similar Messages

Maybe you are looking for