How to empty the cube and re-intialize the data load.

Dear All,
I've the following data flow in my BW7 env.
From Oracle DB, a full load into a BW ODS and then a delta load into BW CUBE.
The full load from Oracle DB to ODS contains weekly data (sort of delta filtering put in place at the source)
Coz of some biz reason, i needed to delete the last few delta request from cube and the corresponding load requests from ODS.
Instead of marking the delta request red and then delete. I deleted the delta request while green thus disturbing my delta load from cube.
Now as i understand, I need to empty the cube, reset the initialization from ODS to cube and then start the delta.
While trying to empy the cube, the system goes into hang mode and data is not deleted (even after 2 hrs)
Even deletion of a single request is not worklng.
I'm not sure whether my above actions of deleting the request (when green) has resulted in some locks at system level.
How do i find this.
The Basis guy says, things are normal with no unnecessary locks.
How do i delete the data.
The ODS has around 7m records.
Regards,
Nagendra.

Dear All,
Thanks for the responses, have awarded appropriate points. However, the problem still continues...
I was able to delete the data from the cube. But when i try to re-load the data from ODS to CUBE (intialization or full load), the data is loaded into PSA but after 30% of data into cube (added records), the request turns to red.
The BWCCMS screen for tablespace shows.
PSAPSR3 95% used
PSAPSR3700 92% used
Could someone give some literature on the various table usage.
Where all can i have a look for the above pbm.
Regards,
Nagendra.

Similar Messages

HT201272 my songs wouldnt play on my ipod so i deleted the songs on the ipod and went to the purchased section in itunes to recover like i did with another song and my purchase history i blank, how can i get them back?

my songs wouldnt play on my ipod so i deleted the songs on the ipod and went to the purchased section in itunes to recover like i did with another song and my purchase history i blank, how can i get them back?

Maybe you have multiple accounts that's why your purchase history is empty. You can try checking for possible Apple IDs that's existing for you or you can ask for assistance from support.
http://www.apple.com/support/itunes/

BIDS 2008 - Making changes to underlying schema at what point is it better to just blow away the cube and rebuild?

What are some tips or other things you have come to discover or use when making schema changes to the underlying database -vs- impact on the cube and dimension usage etc? Is it easier sometimes to just start over with the cube? I realize you
can make schema changes and refresh the DSV, but if you change column names of the keys in the Fact table(s) or others, then likely you will have to reconfigure all the impacted areas in your cube. Have you ever had BIDS just get confused similar to
how it gets confused sometimes when doing SSIS or SSRS projects?

Hi Shitbit,
For a SQL Server Analysis Services database, when changes occur in the schema of an underlying data source, you can refresh the data source view to incorporate all of the changes to each of the underlying data sources. Refreshing a data source view updates
the whole data source view.
if you change column names of the keys in the Fact table(s) or others.
In this case, you changed the relationships between fact table and dimension table. So you need to configure it manually. Please refer to the link below to see the details.
https://msdn.microsoft.com/en-us/library/ms178448.aspx?f=255&MSPPError=-2147217396
In your scenario, it's hard to understand your exact requirement, it would be nice if you can provide us more infromation about your environment, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

I bought a new album off of iTunes the wifi wasn't strong so I left my computer on as it was downloading and went to sleep. This morning I went to listen to the songs and some of the songs will only play the first 50 sec or the first minute? How do i fix?

I bought a new album off of iTunes the wifi wasn't strong so I left my computer on as it was downloading and went to sleep. This morning I went to listen to the songs and some of the songs will only play the first 50 sec or the first minute? How do i fix it or refresh them so i can listen to them fully?
How do I get the songs to fully play? Or can i refresh the songs and redownload them?

See Repair security permissions for iTunes for Windows.
tt2

How do i start video and audio at the same time in ios

How do i start video and audio at the same time in ios?
I have tried a lot of different ways but i cant figure it out?
I can get the sound and animation (timeline) to start playing.
There is no problem to start the video and the animation at the same time.
But i cant get both the video and the audio to start playing when i press a button.
It works great in OSX and on windows?
Here is an example:
// insert code for mouse click here
// Play an audio track
sym.$("_1")[0].play();
// Play a video track
sym.$("host")[0].play();
// Play the timeline at a label or specific time. For example:
// sym.play(500); or sym.play("myLabel");
sym.play("marker1");

If the game has sound in it (and possibly even if it doesn't) it may be overriding the Music app and causing it to stop playing - in which case there is nothing that you can do about it.

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to change the header and footer in the Section Breaks Next Page using OpenXML?

I have a word document file in which I added a Section Break of Next Page, now I want to change the header and footer of that page.
Scenario of example, I have a doc file which has four pages with headers and footers and added fifth page in the section break next page, I want to change the header and footer of the fifth page only. This is achievable manually by deselecting the Link to Previous
button in the Word Application but I don't know how to change it using XML?
My code that adds the new page in the section breaks is:
class Program
static void Main(string[] args)
string path = @"C:\Riyaz\sample.docx";
string strtxt = "Hello This is done by programmatically";
OpenAndAddTextToWordDocument(path,strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
using (DocX document = DocX.Load(@"C:\Riyaz\sample.docx"))
document.InsertSectionPageBreak();
Paragraph p1 = document.InsertParagraph();
p1.Append("This is new section");
document.Save();
Please help.

Here is the sample for your reference:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
namespace WordAddNewFooterHeader
class Program
static void Main(string[] args)
string path = @"E:\Document\TestHeaderandfooter-Copy.docx";
string strtxt = "OpenXML SDK";
OpenAndAddTextToWordDocument(path, strtxt);
public static void OpenAndAddTextToWordDocument(string filepath, string txt)
// Open a WordprocessingDocument for editing using the filepath.
WordprocessingDocument wordprocessingDocument = WordprocessingDocument.Open(filepath, true);
MainDocumentPart part = wordprocessingDocument.MainDocumentPart;
Body body = part.Document.Body;
//create a new footer Id=rIdf2
FooterPart footerPart2 = part.AddNewPart<FooterPart>("rIdf2");
GenerateFooterPartContent(footerPart2);
//create a new header Id=rIdh2
HeaderPart headerPart2 = part.AddNewPart<HeaderPart>("rIdh2");
GenerateHeaderPartContent(headerPart2);
//replace the attribute of SectionProperties to add new footer and header
SectionProperties lxml = body.GetFirstChild<SectionProperties>();
lxml.GetFirstChild<HeaderReference>().Remove();
lxml.GetFirstChild<FooterReference>().Remove();
HeaderReference headerReference1 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = "rIdh2" };
FooterReference footerReference1 = new FooterReference() { Type = HeaderFooterValues.Default, Id = "rIdf2" };
lxml.Append(headerReference1);
lxml.Append(footerReference1);
//add the correlation of last Paragraph
OpenXmlElement oxl = body.ChildElements.GetItem(body.ChildElements.Count - 2);
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
SectionProperties sectionProperties1 = new SectionProperties() { RsidR = oxl.GetAttribute("rsidR", oxl.NamespaceUri).Value };
HeaderReference headerReference2 = new HeaderReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.HeaderParts.FirstOrDefault()) };
FooterReference footerReference2 = new FooterReference() { Type = HeaderFooterValues.Default, Id = part.GetIdOfPart(part.FooterParts.FirstOrDefault()) };
PageSize pageSize1 = new PageSize() { Width = (UInt32Value)12240U, Height = (UInt32Value)15840U };
PageMargin pageMargin1 = new PageMargin() { Top = 1440, Right = (UInt32Value)1440U, Bottom = 1440, Left = (UInt32Value)1440U, Header = (UInt32Value)720U, Footer = (UInt32Value)720U, Gutter = (UInt32Value)0U };
Columns columns1 = new Columns() { Space = "720" };
DocGrid docGrid1 = new DocGrid() { LinePitch = 360 };
sectionProperties1.Append(headerReference2);
sectionProperties1.Append(footerReference2);
sectionProperties1.Append(pageSize1);
sectionProperties1.Append(pageMargin1);
sectionProperties1.Append(columns1);
sectionProperties1.Append(docGrid1);
paragraphProperties1.Append(sectionProperties1);
oxl.InsertAt<ParagraphProperties>(paragraphProperties1, 0);
body.InsertBefore<Paragraph>(GenerateParagraph(txt, oxl.GetAttribute("rsidRDefault", oxl.NamespaceUri).Value), body.GetFirstChild<SectionProperties>());
part.Document.Save();
wordprocessingDocument.Close();
//Generate new Paragraph
public static Paragraph GenerateParagraph(string text, string rsidR)
Paragraph paragraph1 = new Paragraph() { RsidParagraphAddition = rsidR };
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
Tabs tabs1 = new Tabs();
TabStop tabStop1 = new TabStop() { Val = TabStopValues.Left, Position = 5583 };
tabs1.Append(tabStop1);
paragraphProperties1.Append(tabs1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = text;
run1.Append(text1);
Run run2 = new Run();
TabChar tabChar1 = new TabChar();
run2.Append(tabChar1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
paragraph1.Append(run2);
return paragraph1;
static void GenerateHeaderPartContent(HeaderPart hpart)
Header header1 = new Header();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Header" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
header1.Append(paragraph1);
hpart.Header = header1;
static void GenerateFooterPartContent(FooterPart fpart)
Footer footer1 = new Footer();
Paragraph paragraph1 = new Paragraph();
ParagraphProperties paragraphProperties1 = new ParagraphProperties();
ParagraphStyleId paragraphStyleId1 = new ParagraphStyleId() { Val = "Footer" };
paragraphProperties1.Append(paragraphStyleId1);
Run run1 = new Run();
Text text1 = new Text();
text1.Text = "";
run1.Append(text1);
paragraph1.Append(paragraphProperties1);
paragraph1.Append(run1);
footer1.Append(paragraph1);
fpart.Footer = footer1;
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I type Hebrew and English on the same page

How do I type Hebrew and English on the same page in Indesign?

What version of InDesign are you using? And on what operating system? Switching keyboard ("input methods") is in your OS, not in InDesign. InDesign has had the capability to display right-to-left languages since CS4, but only the Middle East edition has the abilities to actually manipulate Hebrew text. If you're trying to do a bilingual, bidirectional document, you'll need the ME edition. If you are a CC subscriber, it comes with your subscription; if you are not, you'll need to buy another version of ID, or a plugin that will allow you to access those RTL features.

How do I combine text and photos on the same page in iPhoto using photobook

How do I combine text and photos on the same page in iPhoto using photobook?

You mean while creating a book in iPhoto? Click on the layout button while viewing a page and select the layout that includes both text and photos. Most themes will have those options.
OT

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

I've an apple ID used to buy off iTunes and a mobileme account for the calendars and contacts. How can I move the calendars and contacts to the older apple ID and use it for iCloud?

If you remeber the password to that Apple ID then follow these steps
1 - Make sure you have an email address that is NOT an Apple ID
2 - Go to AppleID.Apple.com
3 - Where it reads Manage Apple ID - Sign in
Once you are signed in want to make sure the email address you are wanting to use is NOT set up as a "Recovery/Rescue" email for this account.
[To check this - Main page where you see Primary ID - below do you see the email address you want to use listed towards the bottom? Yes - Delete / No - Good ./. If made any adjustments "Save" Next on the left select "Password & Security" - Answer your security questions you set up "if you have any" then scroll towards the bottom and check to see if you see the email address you want to use. Yes - Delete / No - Good] <-> Also you can change your password on this page as well. Any adjustments made "Save"
Once this is done go back to the main page where you should read "Primary ID" and change the email address that is showing to the new email address youo want. "Save" Done
I learned this not to long ago and worked for me. Hope this helps you!

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

My MacBook Pro is running very slow when using the internet and sometimes gives the pinwheel of death, any suggestions on how to fix?

<http://www.thexlab.com/faqs/sbbod.html>

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?

I have three Safari icons. Two in the dock and one on the desktop. How do I eliminate them?
One from the dock and the one on the desktop.

nezzer wrote:
the desktop item will not delete or "move to trash"
In Finder, select the item. Choose File > Get Info (or do ⌘I). Look under General > Kind. Does it read "Alias" or does it read "Application (Intel)"?
If the latter, then it is likely that you're not allowed to delete because it's actually open. Quit Safari. Check if there is an item called Safari in your </Applications> folder. (In Finder, you can get directly to the Applications folder using ⇧⌘A -- that's Shift-Command-A.) Check if it's an application. If it is, then you have an unneeded copy of Safari. You can delete the one on your Desktop. If there isn't, them move the one on the Desktop to the Applications folder -- that's where it belongs.
If you're new to the Mac, consult
Mac 101
<http://www.apple.com/support/mac101/>
If you're coming in from the Dark Side, consult
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife uses the 13" and now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

Hello Teddy53149 and welcome to Apple Support Communities,
Follow this procedure:
Change your OS X account name and home directory name - Apple Support
As they recommend and as always when you're messing with administrator accounts back everything up first.

I bought an iphone 5, i am giving my itouch to my daughter. I set up an itunes account for her, and would like to let her keep the music and apps on the itouch plus give her her own account to add to the itouch. how do I do this.

i bought an iphone 5, i am giving my itouch to my daughter. I set up an itunes account for her, and would like to let her keep the music and apps on the itouch plus give her her own account to add to the itouch. how do I do this.

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How to empty the cube and re-intialize the data load.

Similar Messages

Maybe you are looking for