How to enable 192khz support for Audigy 2 ZS?

- Ok i know that this question has been asked alot but no one properly answeared it, when i open my console with latest drivers i notice that i only got 2 options 48khz or 96khz, altought this card is suposed to support 92khz i wonder why i cannot select it from creative menu?
Thank you in advance & awaiting a reply desperately!

Can someone please explain this to me? i dont wanna give it back because i think its broken when its not, if i could ask someone else i would but unfortunatelly creative closed on Portugal
I know that this is only supported in stereo mode? so what must i do? i got a 2. system, doesnt it count as stereo?
Its creative itrigue connected to front left and front right, is there somewhere else i must connect it in order to get the full 92 khz support? im also running win dows xp here are my specs:
intel core 2 duo 3.0ghz @3.6ghz
4gb DDR2 066 corsair dominator
Asus P5QL Pro
Ati HD 4870
Thanks again!

Similar Messages

How to enable push mail for gmail in iphone 6 plus

how to enable push mail for gmail in iphone 6 plus

Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

How to enable cascade view for sites(iStore) in 11i?

How to enable cascade view for sites in 11i?

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
for TechNet Subscriber Support, contact [email protected]
Wendy Li
TechNet Community Support

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Arabic is not listed as a display language in iTunes for Windows 7. How can I add support for this language?

Edit ---> referance -----> general ------> language

How to enable Matlab support in Photoshop CC?

How to enable Matlab support in Photoshop CC? I've downloaded zip-file with dylib and m-scripts, however it does not work.
By the way, app.featureEnabled("MATLAB") return false in standalone jsx-script, so I believe it's a Photoshop confiruration issue (I found some suggestion _for previous_ versions, that it can be caused by non-exteneded Photoshop version).
What can I do?

Yes, it'is the place where I've downloaded Matlab "plugin".
Interesting, that Matlab can not start Photoshop CC via pslaunch — Photoshop crashes. However, Photoshop can be launched manually, but calling psmatlab.dylib from Matlab does not work.
It's unfortunate that I can not migrate to Photoshop CC (I've used CS5 before and corresponding Matlab integration worked like a charm). It is possible that Photoshop CC has some "forgotten" Matlab-compatibility option that should be switched on?
It seems weird that app.featureEnabled("MATLAB") return false in Photoshop CC (in returns true in Photoshop CS5 Extended).

[svn] 3624: Enabling initial support for colorTransform in GraphicElement.

Revision: 3624
Author: [email protected]
Date: 2008-10-14 08:35:30 -0700 (Tue, 14 Oct 2008)
Log Message:
Enabling initial support for colorTransform in GraphicElement.
Bugs: MXMLG-241
Check-in Tests: Pass
Reviewer: Chet, Ryan, Jason
QA: Yes
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-241
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

I guess GraphicElement will never support automation, at least by the time of Flex 4 release.
During my tests with GraphicElement extending IAutomationObject interface, I've just hit RTE coming from closed-source mx.automation.AutomationManager class requesting the automated UI control to implement IUIComponent interface, and obviuosly GraphicElement class does not implement this interface
TypeError: Error #1034: Type Coercion failed: cannot convert GraphicElementAutomation@7b10e19 to mx.core.IUIComponent.
at mx.automation::AutomationManager/getChildren()[C:\work\flex\dmv_automation\projects\automation\src\mx\automation\AutomationManager.as:1157]

How can I add support for JPEG 2000 to Final Cut Express?

How can I add support for JPEG 2000 to Final Cut Express 4? I need to export an .mov file in the JPEG2000 format but it is not available as a quicktime export option. Is this something that I can add via a quicktime .component? Would appreciate any insight anyone might have... Thank you.

I believe you need to purchase the QuickTime Pro key ($29.99 USD). Once you enter the registration number in System Preferences for QuickTime Player 7, it 'unlocks' several export features, including JPEG2000.
See:
http://support.apple.com/kb/SP521
http://support.apple.com/kb/HT3820
http://support.apple.com/kb/HT2240
http://store.apple.com/us/product/D3380Z/A/quicktime-7-pro-for-mac-os-x?fnode=62
-DH

Cannot boot! Cannot charge! How long can we support for RIM?

First of all, I am very disappointed to RIM
From the beginning to now I have used many BlackBerry mobile phone, RIM has been rigorous work and good service. But since I used 9520, now playbook, lets me lose confidence to the RIM, this is real
The escalation of the 668 systems, playbook can not boot, countless toss, numerous times to restart, no solution . After friends advice, finally able to boot.
I don't know such a famous company, before the update products, why there will be such a mistake.
Boot problem is solved, but then again, playbook does not charge, still numerous toss, numerous times to restart, power is reduced from 20% to the present 0%. until now still can not solve.
I don't know, so rigorous style of a company, why not on major issues, the first time to give solutions for every user. Why???
How long can we support for rim? Maybe every user heart will understand.
Add content:
Not charging performance:
In addition to power has no change and in reducing, other phenomenon are exactly the same than a normal machines
No matter how I restart the device, how to charge, all have no effect
Try method:
every 4 minutes hold "power+v-+v+“（three key）to restart; replacement charger plug; the mode of standby charging; continuous plug-in charger; after connecting DBS to connect the charger; continuous charging hours;
The above methods are fellow Netizens suggestions, but no one can save my playbook.
RIM, can you tell me how to do?

why did not have anybody, do something?

How to enable VT-x for Win 7 boot camp partition MacBook pro?

I am trying to install HAXM to accelerate my android emulator, but I am having problems. I have a Win 7 bootcamp partition in my Macbook Pro, and when I am finishing the installation a message pops up saying that my VT-x is not enabled, the problem is that I can't access the BIOS to turn on the virtualization easily like a PC user, How to enable the VT-x for Win 7 boot camp partition?
The VT-x is running beautiful in my macintosh partition, but I can't understand why in my boot camp partition the VT-x remains disabled.
My processor is a Intel Core I5-2435M , I downloaded the intel processor identification utility, and my processor supports the virtualization tech and hyper-threading tech.

You can return that Mac for a full refund if it is less than 14 days from date of purchase.
themsbg wrote:
I have the same problem. Have you figured this out yet? I just bought a MacBook Air 2013. I thought I would be able to use Virtualization because it has a supported processor, but now it won't work in Boot Camp.

How to enable Staggered Spinup for DIsk-utility Software raid?

I have a Mac Pro 3, 1 (early 2008) and was wondering if the system supports staggered spin-up. I have four 7200.12 Barracudas in the drive bays and use them for software strip volume via SoftRAID.
If the system does support staggered spin-up, how can I enable it. I was previous user of Bios operated hardware, (PC user is misleading :-p) so I am not familiar on how to enable those options on Macs.

Unless SoftRAID does something, but there ARE disk drives that by themselves will I am pretty sure, whether it also depends on the controller, not sure.
I know some external RAIDs used drives that did (Maxtor had) and sometimes a disk wasn't ready on time. And tweaking the driver or firmware for the controller can help.
On a PC you can add a delay in the BIOS to wait, yes.
The whole idea is so that you aren't requesting 4-5 drives pulling the amps/watts needed at once making it lighter load on PSU.
Is there a problem? have you asked the excellent, quick and helpfull SoftRAID support? or just "curiosity?"

How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so much

http://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

How to enable Gant view for migrated Task Lists in SharePoint 2013

We recently migrated several Task type Lists from an old SharePoint environment (WSS on SP 2003) to SharePoint Enterprise 2013. I do not see the Timeline, Calendar and Gant View options available for the migrated Views of the migrated lists like
I see for newly created Task Lists in SP2013. Is there a way to enable this feature for these migrated Task Lists?

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
for TechNet Subscriber Support, contact [email protected]
Wendy Li
TechNet Community Support

How can I get support for Canon Powershot S110 in CS5 Photoshop?

Does anybody know how to get support for using raw files created by Powershot S110 in PS CS5? PS CS5 does not open them and requires an update. However, this camera is not listed in the description of Camera Raw updates (the top model of this series is S100 in the list) and the latest update is also not compatible with CS5.

Which operating system are you using?
Since photoshop cs5 can only use up to camera raw 6.7 and that camera needs at least camera raw 7.3, you'll need the 8.6 adobe dng converter to convert the canon s110 camera raw files to dng copies which then photoshop cs5 should be able to open.
For windows xp, vista or mac os x 10.6.8 use the 8.3 adobe dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh
How to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

How to enable digital signature for browser enabled infopath form?

Dear all,
I have designed infopath form and published it into the document library. I want to provide signature option on the browser enabled infopath form.
I have created it using secion and digital signature control.
but I am getting this message.
When i click on Yes . I get following screen.
And it just hang here. I have enabled the active x control feature for IE.
Please tell me where i should install this component and how it can be done?
I have access only to the sharepoint site.
Thanks

Hi,
According to your post, my understanding is that you want to enable digital signature for browser enabled infopath form.
To be able to sign this form, you need to activate two Windows Internet Explorer add-ons. Click the Information Bar in the dialog box, and then click Run ActiveX control to activate each add-on.
Then you need to active the following add-on.
In my environment, after I click the Next button, it open the picture as below.
Once I click the link to add the add-on as above, everthing works well.
For more information, you can refer to:
Add a digital signature to a browser-enabled form
Digital Signatures in InfoPath 2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to enable 192khz support for Audigy 2 ZS?

Similar Messages

Maybe you are looking for