How to enable 2 sided printing on Epson wf 3520 on Maverick?

I recently purchased an Epson WF 3520 printer that prints 2 sided. My Mac Maverick with all updates shows that 2 sided is turned off but I have not found how to turn it on.

Here is an example from Pages. See the check mark box on the right side? Check that box to enable 2-sided printing.
KOT

Similar Messages

  • How to enable the printer option in print priview screen in script

    Hi All,
    Please tell me how to enable the printer option in script print priview screen.
    Thanks & Regards
    Murali

    hi
    the print option TDNOPRINT has to be intial  (' ').  NOT 'X'
    TDNOPRINT  CHAR  1  0  No printing from print preview
    this will do.
    Gr., Frank

  • How to enable frontend printing using Adobe Print Forms

    Otto Gold at the forum "SAP Interactive Forms by Adobe" gave me the tip that Sandra Rossi in this forum might help me out. Here is the link to my original thread How to enable frontend printing using Adobe Print Forms
    My question was:
    Hi Experts!
    Did anyone of you manage to enable frontend printing using Adobe Print Forms? In order to save administration effort we use frontend printing in our ERP system. We just changed some SMARTFORMS to the new Adobe Forms technology. Now we learned that direct frontend printing does not work with these forms.
    Any help will be very much appreciated.
    Kind Regards,
    Gerald

    I think you'll be disappointed by a rather negative answer but I'll try to explain everything I know (or think I know) the best I can
    The simplest solution is to do a preview, and print from Adobe Reader! (as I could see on one project, users have to display one more dialog than usually to print) It's the best workaround according to me.
    How Adobe form printing works:
    When you print an Adobe form from SAP, a printer language (PCL, PS, ZPL, PDF) is retrieved from TSP0B table according to the device type, ADS (Adobe Document Services, installed in the SAP java stack) is then contacted to generate the form: a file corresponding to the printer language is generated and sent back to SAP (there are also 2 other little files but it's of none interest here). SAP stores it as a file (named SPOOL...) in the global directory (DIR_GLOBAL when you use AL11 transaction).
    When you ask SAP to print it, it sends the file as is to the printer.
    Note: when you ask SAP to display the spool, SAP sends a request to ADS which will send back a PDF (binary stream which is not stored on disk, just displayed on frontend).
    How frontend printing works:
    If you want to print a normal spool via frontend, SAP doesn't know the language of the printer you will choose. SAP sends the spool in a format named SAPWIN to a frontend program named SAPLPD, it converts the SAPWIN format into GDI, a Windows format that is understood by all printer drivers, and it is sent to the printer driver (you have selected) which converts the GDI format into the printer language.
    Any workaround?
    First possibility would be that ADS converts the PDF into SAPWIN format (by creating an Adobe .XDC file at the ADS side). SAP says it's not possible in Note 685571 - Printing PDF-based forms. As I understand, SAPWIN is a very simple language compared to PCL for example, so it is very difficult to convert a PDF to SAPWIN without losing much information. There's a SAP note about the SAPWIN language if you want to check.
    Second possibility is to print directly the PDF through Adobe Reader: you get the PDF from ADS, download it to the frontend (easy), and execute directly Adobe Reader print function. Unfortunately, I don't know if it's possible. Moreover, we should enhance the standard SAP print dialog...
    Third possibility is the one I recommended at the beginning of this post

  • How to enable the print & archive button that appear in the smartform outpu

    How to enable the print & archive button that appear in the smartform output.....

    Hi,
    I agree with the details which has been given above, but still if you want to default option 3 "Print & Archive" in drop down, it is possible.
    All you need to do is to set the value of output_options structure field "TDARMOD" as "3" while passing the parameters to dynamic function module of smartform.
    That will select "Print and Archive" in background and display to user.
    Sumit

  • Two-sided printing with Epson Workforce 630

    I bought a new iMac a few months ago and got the Epson WorkForce 630 printer at the same time. However, I can't figure out how to do duplex (two-sided) printing. I've searched around, and it looks like this feature may not be supported for the Mac. Now, why would Apple sell a printer through their website that doesn't support Mac? This seems like a basic feature that all printers should have.
    Does anyone know a work-around? The "two-sided" selection is grayed out for me.
    Thanks!

    Thanks! Unfortunately, on the Epson site, it says, "
    Q:
    Is manual duplex (double-sided) printing supported in Mac OS X with my product?
    A:
    No. This feature is supported in Windows only."
    I really don't know why Apple would sell a printer through their stores that doesn't support all features in their OS. I might end up going back to my older printer.

  • How is 2 sided printing done with a Photosmart B210a?

    Photosmart Plus B210a
    Win 7-32 bit
    no errors
    no changes
    General question for how to start a 2 sided print job. I don't seem to be able to locate the feature in the printer software.
    Thanks

    Hi,
    I can NOT even find word duplex in its manual (c02456532.pdf).
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to Enable PDF Printing

    Hi Gurus,
    I am doing R12 upgrade and part of its finishing upgrade tasks, I need to "Enable PDF printing".
    What all are the steps to enable PDF printing.
    Please advice.
    Thanks
    Sony

    I am doing R12 upgrade and part of its finishing upgrade tasks, I need to "Enable PDF printing".
    What all are the steps to enable PDF printing.How To Print Concurrent Requests in PDF Format [ID 333504.1]
    How to Print PDF/UTF8 in R12? [ID 778970.1]
    R12.0.6+ : Oracle Application Object Library Pasta Printing Health Check Test [ID 732270.1]
    http://forums.oracle.com/forums/search.jspa?threadID=&q=PDF+AND+Printing+ANd+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to enable report print or configure print server

    Hi All.
    Currently using lastest Apex version (4.1.x) with 11g XE.
    Where can i find info, example etc. to enable report printing? When i access this attribute section, i get a red warning message saying there is no print servver configure.
    Regards, Luis ....!

    Here is a whitepaper that should answer your questions..
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/configure-printing-093060.html
    Thank you,
    Tony Miller
    Dallas, TX

  • How can I restart printing to Epson printer with error message Connection failed: NT_STATUS_BAD_NETWORK_NAME

    My Mac Book Pro OSX 10.6.8 has suddenly stopped printing to Epson Stylus Photo RX690 after many successful print runs.
    Print attempts are paused with the Message:
    Connection failed: NT_STATUS_BAD_NETWORK_NAME
    The Epson is shared with a Toshiba laptop with Windows Vista.
    All assistance is appreciated!
    Cam Opie

    Pulling one out of the air here, since it looks like you don't mind trying stuff...
    Have you tried it with a trailing slash yet?
    About the best I can make out of...
    http://www.mail-archive.com/[email protected]/msg42165.html

  • How Do I BORDERLESS PRINT on Epson RX500 in 10.4.7?

    Hello,
    When I set up my Epson RX500 All-In-One printer/scanner I was using 10.3 Panther.
    The Print Setup Utility looked just like it does in the setup guide that comes with the unit.
    I never used Borderless Printing but in the "Printer List" it showed Stylus Photo RX500 and Stylus Photo RX500(Sheet Feeder - Borderless).
    Now a year later (after upgrading to 10.4.7) I want to do some borderless printing with 4x6 and 5x7 photo paper but the "Stylus Photo RX500(Sheet Feeder - Borderless)" listing is not there anymore.
    Also the Printer Setup Utility has changed. The screens aren't like they were in 10.3 (where I select EPSON USB from a pull-down menu, etc).
    I went to the Epson Website to download new drivers but they only have
    TWAIN Driver and EPSON Scan Utility v2.65A for Macintosh OS X (v10.2.x - 10.3.x)
    OR
    Printer Driver v3.0aAs for Intel-based Macs with OS X (v10.4.4 or later). There isn't one for PowerPC 10.4.
    I CAN print a supposed 4x6 borderless print using Page Setup and "4x6 Borderless" setting for Paper Size but it doesn't come out borderless -- it has borders. There is a 5x7 setting but it doesn't say borderless.
    Any help with this problem? I really would like to see the "Sheet Feeder - Borderless" in my Printer List again and do some true bordeless printing!
    Thanks!!
    PowerMac FW800 (G4), iMac G4 800 SuperDrive   Mac OS X (10.4.7)  

    Thank you so much that was a big help.
    After you do that, though, you have to click on the Page Setup drop down menu and select Borderless Sheet Feeder instead of Standard from the list -- that's the part I wasn't doing. It defaults to "Standard", whatever that is, and doesn't make the Borderless Printing available if you don't change it.
    After that, though, I couldn't get the border even when I wanted one (which I do sometimes) using the RX500 regular setting (NOT borderless) -- it's makes about a 1/10" border instead of a 1/2" one.
    FWIW I found that if you then delete Borderless Sheet Feeder (that I tried so hard to get!) from the Printer List and re-start the computer you will then have true border printing again! Re-install Borderless driver to get true borderless again (ugh). I guess I'll have to do that because sometimes I want borderless and other times I don't.
    Thanks!!

  • How to enable a printer which was offline for long time?

    Hi,
    One of our printers has not been used for a long time and was set to be permanently offline. Due to the need of printing, the printer was enabled. It is powered on (and can also be disabled and enabled) but is unable to print.
    Is there anything in SAP to check to see why it is failing to print?
    I have tried to check the status of this printer with other printer which is working fine. There is no difference in between their settings.
    The spool requests are waiting to be printed. I would like to check the ip addresses of the printers. Is it possible to find them through SAP. My O/S is Unix.
    Please help me to find the IP addresses of printers attached through SAP and I will try to check them first.
    Thanks
    Vijay

    Hi Vijay,
    Check SPAD -> output devices
    Check thats the printer is properly setup and it been handled by and active spool server, check that the printer ip-address is correct and the right method is in place.
    You can find the ip address of the printer by doing a ping <name of the printer> in a command prompt.
    Regards
    Juan
    Please reward with points if helpful

  • How to enable color printing setting in R/3

    Hi,
    We have configured HP COLOR Laster jet 2650DN printer at r/3 level. but users are not getting print in color, when they give non sap print, then it prints in colors. I tried to enabled the color printer option in spad -> output attribute, but it didnot help. Is ther any other setting can enabled the color printing in sap ?
    Thanks
    Rajesh Kokane

    I understand that the issue is with color printing only for this printer. What device type are you using? Only printers listed in this note are fully tested and supported by SAP as detailed.
    Does color printing work for other printers you have and are the SPAD settings the same?
    Regards, Mark

  • How to enable "remote printing" from a .rdp shortcut on OSX

    Hi,
    I cannot get my .rdp file to open with "forward printing devices" working on OSX (works fine on Windows).
    When I create an entry in RDP Client and check "forward printing devices", it works fine, but if I then export the configuration to a test.rdp file and run it, then the forward printing does not work.
    If I then import the test.rdp I just exported and open the session params, "forward printing devices" is not checked anymore.
    What is the param(s) that I should set in my test.rdp to forward the printers (same as checking the "forward printing devices" in the ui)?
    I have already tried the following:
    redirectprinters:i:1
    but it does not seem to work
    Thank you,

    Hi,
    It seems that the parameters we set in the .rdp file do not work for the app of Mac. You may have to configure this via UI.
    I will forward this issue to the product team.
    Thanks for your understanding.
    Jeremy Wu
    TechNet Community Support

  • Compatibility Issue(s): Airport Express and HP Officejet 8500 Pro. How to enable network-printing?

    Hello there,
    I recently bought a Macbookl pro and now wanted to connect my Denon S 302 and my printer to my wireless network. Since the Denon S 302 cannot connect to my mac (since it's fireware is to old, so there are combatibility issues as well), I bought a "Airport Express station". The station has been configurated as a seperate wireless network, the stereo device (my Denon) and the HP Officejet were also connected. The stereo device with it's optical plug, the printer first over USB and then over ethernet conncetion.
    The setup was quite easy, the stereo device is also working with my iTunes libary, so the connection from Mac to Airport Express is not the problem.
    Also the printer is working correct, when it's plugged in my Mac... Both connection ways, the USB and Ethernet connection were not working, the printer cannot be activated it's status is offline.
    Also the Manual does not really help.
    The prouble shooting here linked a document to the HP site, which states, that my printer will not work with the airport express station, so is this ture???
    Unfortunatly the warranty is exeeded, so there are no possibilities to connect the HP support via Mail or ask any questions..
    Thanks for any help and advice in this case...

    There is another problem:
    The printer is recognized in the router setup, so it should work, but since I'm now using a Mac instead of my old Laptop, the router cannot forward the printer to my Mac, this only works with Windows PC's ... 
    I could post a link to the official help board of my telephone provider (the distributor of my router), but since this post is in german, it might not really help. But what was said, that it could work, if Apple would help them to get the right settings...
    Now I'm trying again to connect the printer to the Airport Express, which is now connected to the existing wireless network, instead of building a new one...
    So, are there any more possible solutions?
    And thanks in forward for all your help...
    Greetings from Germany

  • How to enable PDF printing (Ubuntu, Tomcat+Cocoon, Apex 3.1 or greater)

    Hi,
    Hope that this my guide help someone
    http://ubuntuforums.org/showthread.php?t=1004742
    Br, Jari

    thank you very much for the document (posting) on Ubuntu forms.
    I have tried it with Ubuntu 9.04 and it works as well as it was on your 8.04 system.
    thax again
    R/ Zaf

Maybe you are looking for