How to enable a disabled iphone 4s
my bf bought me a iphone 4s from his friend he was drunk does not remember password there for iphone disabled, how to enable it with out an itune account
You can not. You have to have the Apple ID password. Ask your drunk friend to reset the password and let you erase the phone. Simple.
Similar Messages
-
How to enable my disabled iphone.it says connect to itunes
How do i enable my disabled iphone.It says connnect to itunes.Tell me what can i do about it
iOS: Device disabled after entering wrong passcode - Support - Apple
-
How to enable your disabled iPhone
How do I enable my disable iPhone?
You need to restore using the recovery mode as described in http://support.apple.com/kb/HT1212
-
How to enable a disabled iPhone?
I have an iPhone 3G and a passcode lock was entered 10 times incorrectly. This wiped all the information off the device and also disabled it. I would like to know how to reenable a disabled iPhone 3G.
You'll have to restore it as a new device, however all your information is wiped for good.
-
How to enable my disabled I pad
How to enable my disabled iPad
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
How to fix a disable IPhone 4???
hey if you dont know how to fixed it. i dont need you and i didnt ask you to be here right? Who do you think youre a tech guy to speak that theres no way of getting sollve it. Then theres no way to create alot of products if there no way solution for prob...Im sorry you started it.Thanks for your very encouraging and smart solution. Fyi! Apple is one the best Co. that admire when it to product and innovations and i dont think they made iphone now the leading cellphone in the. What do you think ???
-
How do I connect disabled iphone to itunes
How do I connect disabled iphone to itunes
Use Recovery Mode, as described here:
http://support.apple.com/kb/ht1808 -
How to fix my disabled iphone 4s . i dont remember my password.
How to fix my disabled iphone 4s ? I dont remember my password.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software. -
How to enable a disabled iPod that won't connect to internet
trying to enable my disabled 5th generation iPod touch. I have tried connecting to iTunes on the computer, which I couldn't get it to do anything. I then tried using the "Find my iPhone" website and erased the iPod. However, I got a message that says "This iPod will be erased when it connects to the internet". How do I connect a disabled/locked iPod to the internet/wifi while it is waiting to be erased because it won't connect to internet/wifi?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
How to enable a disabled iPad without losing very important pictures?
How can you enable a disabled iPad without losing very important pictures?
If you have important files, photos, videos which are only on your iPad, you need to backup frequently to your computer or iCloud.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!
2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PMHi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
vendor: LENOVO
physical id: 0
version: 68ET35WW (04/16/2008)
size: 106KiB
capacity: 960KiB
capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards -
how do I enable a disabled ipod touch
Place the iPod in Recovery mode abd connect to your computer and restore via iTunes.
-
How to override a disabled IPhone 5
How do you override a disabled IPhone 5?
Has this Device been Hacked / Modified / Jailbroken...
If it has... Then..
Sorry... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere.
Otherwise...
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808"
You may need to try this More than Once... -
How to enable panorama in iphone 4s
How can we enable panorama in iPhone 4s?
Nope it's not, I upgraded my iPhone 4S on the 19th and it was right there. In the settings where you can set up the grid and the mediocre HDR function, on the bottom it says Panorama.
Now I have my iPhone 5 so I don't have to worry about anything (beside the malfunctioning Siri).
Only the iPhone 4 does not have panorama functionality. -
How to unlock my disable iphone 4
how can i unlock my disable iphone 4 and keep my pictures?
The only way to accomplish that would be to remember your passcode. However, once the device goes to disable, then your only choice is to restore the phone to remove the passcode. See the instructions in this support document. Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Maybe you are looking for
-
How can I pass paramters to next page with session protection on?
Hi, guys: I encounter a problem of session protection problem. In a report page I set up a column of "map" link, so I can pass several parameters extracted from the same row to the new page where I can show map. I was using javascript popup2, and it
-
Can't remember game center email... HELP!
My little brother has two game center accounts and accidentally signed out of one without looking at which email he had used. We have tried every email possible and no luck finding the account he had used. If you know anything about how to fin
-
Exporting the label of a af:selectOneChoice from an applications table
Hi All, JDEV 11g I have a problem where a column in an applications table <fnd:applicationsTable>is defined as a select one choice as shown below <af:selectOneChoice value="#{row.bindings.BucketType.inputValue}" label="#{row.bindings.B
-
In Windows 8 I received the error iTunes Library .iti file is locked on a disk or you do not have permission for this file. I can open itunes in the compatibility mode for Windows XP Service Pack 3. I've tried changing permissions and sharing - nothi
-
Photoshop CS2 requires repeat activation
After three years of use, my installation of CS2 has started warning me that the 30 days period for activation has expired and I will need to activate before I can continue to use Photoshop. I have had to re-activate around 8 times now, but activatio