How to enable ABAP maaping in Exchange Profile.
Hi Guys,
Where and how can I enable ABAP mapping in exchange profile?
Regards,
XIer
Hi,
See this document. It has shown how to enable it in exchange profile:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Regards,
---Satish
Similar Messages
-
How to enable health monitor on exchange 2013.
Dear All,
I ran the BPA for exchange 2013 on one of our CAS servers and received the below event, I need to enable the 'MessageCountMonitor' on exchange server. I have other counters that I need to enable but I'll start with this and apply for the rest.
Event:
The health alert value of 'MessageCountMonitor' on exchange server 'server_name' is 'Disabled', that may cause some special unhealthy state of the server. Run 'Get-ServerHealth' to get the detail information.
Learn more.Hello,
Yes, you can safely ignore this information reports.
Thanks,
Simon Wu
TechNet Community Support -
How to enable ABAP Mapping Program in Integration Builder
i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
After releasing it in DEv, it should go through request number.
but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
plz tell me what to do.
regards
sreeniHi kancham sreenivasulu ,
These web-sites may help u solving u'r problem:
How 2 connect non SAP RFC-Programs with XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
cheers!
gyanaraj
*****Pls reward points if u find this useful -
How to enable IRM licensing in exchange server 2010?
I need to enable that service but I cannot find it in the management console.
Bharat: Having difficulty with getting the perms correct, apparently:
RMS on Server 2008R2, Exchange2010, EXCHServers group has Read/Execute perms on servercertification.asmx and the inheritable checkbox is set.
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Set-IRMConfiguration -InternalLicensingEnabled $true
No connection could be made because the target machine actively refused it 192.168.1.46:443 ---> Unable to connect to t
he remote server ---> Failed to get Server Info from
https://rms.baupost.com/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : 8E3210B2,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
[PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Test-IRMConfiguration
cmdlet Test-IRMConfiguration at command pipeline position 1
Supply values for the following parameters:
Sender: ************
Results : Checking Exchange Server ...
- Exchange Server is running in Enterprise.
Loading IRM configuration ...
- IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- RMS Certification Uri:
https://rms.baupost.com/_wmcs/certification.
Verifying RMS version for
https://rms.baupost.com/_wmcs/certification ...
- Warning! Failed to verify RMS Version. IRM features require AD RMS on Windows Server 2008 SP2 with the
Hotfixes specified in Knowledge Base article 973247 (http://support.microsoft.com/kb/973247) or RMS on Window
s Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//rms.baupost.com/_wmcs/certification/server.asmx. ---> System.Net.WebException: Unable to connect to the rem
ote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine ac
tively refused it 192.168.1.46:443
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& soc
ket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& except
ion)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc() -
How to enable "Users" to creat accounts/profiles?
I've just got my A3000 yesterday, and I was trying to make new profile to be used by my kids and I could'nt
I've seen tutorials on how to make it, but the fact is that there is no "Users" on settings!
Thanks for your support.Lenovo removes multi-user functionality from its tablets for some reason.
-
Cannot activate ABAP mappings even after changing exchange profile
Hi,
I have completed all the steps to be able to use XSLT (ABAP) mappings (In exchange profile changed parameter com.sap.aii.repository.mapping.additionaltypes = R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
I still, however, only have 3 option in the mapping program dropdown (Message Mapping, Java and XSL) and not XSL (ABAP) as I beleive I should. Is there another step I am forgetting to get this working? I have developed an ABAP XSL in the ABAP stack but am unable to use it due to this issue.
Regards
MattHello
Try restarting the java engine. This may be necessary for the new parameter setting to take effect.
Regards
Mark -
How to enable the Exchange 2010 Admin Audit logs in Event Viewer
How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpfulHi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support -
How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.
Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
DATA lo_el_input TYPE REF TO if_wd_context_element.
DATA ls_input TYPE wd_this->element_input.
DATA lv_vbeln TYPE wd_this->element_input-vbeln.
* navigate from <CONTEXT> to <INPUT> via lead selection
lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
* @TODO handle non existant child
* IF lo_nd_input IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_input = lo_nd_input->get_element( ).
* @TODO handle not set lead selection
IF lo_el_input IS INITIAL.
ENDIF.
* get single attribute
lo_el_input->get_attribute(
EXPORTING
name = `VBELN`
IMPORTING
value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = ' ' ). -
Accessing Exchange Profile Parameters programatically (using Java/ ABAP)
Hi All,
Exchange Profile parameters can be accessed using the URL http://<server>:<port>/exchangeProfile
Does anyone know how to access 'Exchange Profile parameters' programatically. (from java).
Code snippet for the same would be of great help.
Regards,
Siva MarananiHi,
Is there any way to access exchange profile parameters using Java?
I need to access exchange profile from an UDF.
Thanks in advance.
Pedro Leal -
How to get ABAP mapping option in Interface Mapping
Hi
experts
How to get ABAP mapping option in Interface Mapping . i need to do abap mapping . i didnt find the option
plz help meHi,
If u2018ABAP-classu2019 and u2018XSL(ABAP ENGINE)u2019 does not appear under the u2018Mapping Program Typeu2019 in Interface Mapping, one has to make an additional entry in the Exchange Profile.
Only a user with the J2EE security role (administrator) can make the following settings in the Exchange Profile.
It is achieved in the following manner:
1) Open http://<host>:<port>/exchangeProfile/index.html
2)Choose IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
Add: R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
To check whether the data has been successfully read from the exchange profile:
1- Open http://<host>:<port>/rep/support/admin/index.html
2- Choose Administration of Properties -> All Properties
3- If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not visible, press REFRESH button
After doing above check in IR, if still don't find the option for ABAP mapping then refresh the cache.
Award points if useful. -
system copy : how to backup your rfc connections, partner profiles (we20) amd ports in IDOC processing (we21) ???
Hi forum,
if you want to copy your production system to your quality assurance system you can export users and later on reimport
it to save work. That's good.
But how about RFC connections, partner profiles and ports in IDOC processing ? Anyway to export and reimport it later on ?
Thank you for your help.
Kind regards
O.EggertHi forum,
in the meantime I found out how to handle this matter. May be this solution is not very elegant, but it works.
As for RFC-Connections there are several tables beginning with rfc. e.g., rfccheck. But 4 of it only differ from one system
to the next. These are rfcdes, rfcdoc, rfcattrib and rfccheck. What I did is the following : I used
brspace -u sapsr3/<password> -f tbexport -t "RFC3"
and quite simply exported these tables. Then I deleted some of the RFC-Connections, both ABAP and TCP/IP. After reimporting
what I exported before all these destinations were availlable again. As for ABAP the password had to be reentered but this
can be avoided, too. Have a look at transaction /nsecstore. The tables behind it are RSECTAB and RSECACTB, rspectively.
Export it after having exported the rfc* tables and reimport it after having reimported the rfc* tables. Very important : enable
the option "consistent export" !!!
It worked this way although there might be better and more elegant solutions.
As for transaction we20 check sap not 182172.
Hope that I could be of profit to this forum.
Kind regards
Olaf Eggert
p.s.
import command : brspace -u sapsr3/<password> -f tbimport.
Them select what you exported before. -
No Connection to IB -- R3 Exchange profile - pls clarify the following ?
Hi friends ,
My scenario is Proxy to file .
While i am executing SPROXY tcode from R3Dev Syetsm . It is showing as <b>No Connection to Integration Builder</b>
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
No connection to Integration Builder
While i was follwing this thread they mentined as
u have to check whether ur r/3 system's(WAS 620 or above)
excahnge profile has entries for integration builder.
pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is
<b>
http://r3servername:5<instance>00/exchangeProfile</b>
Sudhir
P.S:- don't check XI's exchange profile as it will anyways be there.
Basically to fetch the details of interfaces into SPROXY..connection to XI is required from the R/3's exchange profile
My question is
1. We are having WebAS 7.0 . XI7.0 SP10 . R3 system is ECC6.0
<b> a. we have ONLY ABAP Instance no java instance running in this . So, how can we access the exchange profile for R3system ?</b>
Regards.,
V.RangarajanHi Ranga,
ECC will use exchange profile in XI, so you don't need additonal java instance for ECC, so when you call the SPROXY, actually it call to XI.
Please make sure the connection from ECC to XI its work.
and your ECC can ping to the XI computer (using domain name)
This solve my problem.
Regards,
Fendi Suyanto -
No HTTP port defined in Exchange Profile for sld
Hi all,
During the BI and portal connectivity, we successfully executed the template installer, however, we have not yet imported the abap and related sp from SAP note.
After successful execution of template installer or CTC, we ran the supportdesk tool resolved errors and are left behind with two errors as below.
ERROR 1. RED BI Mastersystem
Message:
Error while connecting to BI mastersystem via RFC: Checks related to ABAP information cannot be executed because an outdated version of function module RSPOR_SETUP_CHECK is implemented. Please implement the recent version of note 937697.
Solution:
Check connection properties in Portal Systemlandscape for the property category 'Connector' (Systemlandscape/SAP_BW)
Issue: Now looking at connector properties that are set by CTC are complete and set. Connection Test for both Connector and SAP Web AS Connection are successful, only ITS is neither setup by template nor by us. Please suggest how to resolve this.
ERROR 2. RED Error in Check Class: com.sap.ip.bi.supportdesk.checks.impl.MultipleUserMappingCheck
(Error during retrieval of inverse user mapping for ABAP user 'null': No backend user ID provided for inverse user mapping. com.sapportals.portal.prt.runtime.PortalRuntimeException:...)
Looking at log file server<#>/log/defaultTrace.trc it points the following error:
No HTTP port defined in Exchange Profile for sld.BIW.bcs AND
Error reading from AII properties for sld.BIW.bcs
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.rb_exception.MESS_INVALLD_PARAMETER_VALUE
com.sap.aii.utilxi.misc.api.InvalidArgumentException: Parameter httpPort has the invalid value null
Issue: Checking we find that ICM is running with correct dns and port 8000 (http), only smtp is holding port 0. Where do we maintain http port for sld? Kindly suggest.
Finally the support desk tool is leaving the following checks with status UNDEFINED, would this impact the connectivity?
1. UNDEFINED Deployed Components
2. UNDEFINED Export check (PDF lib, ADS, ...)
3. UNDEFINED Synchronized Clocks on WebAS Java and ABAP
4. UNDEFINED URLs Prefixes Customized on Both J2EE and ABAP Side
5. UNDEFINED WebAS ABAP Certificate and Login Modules Configuration
6. UNDEFINED WebAS ABAP Settings
Looking at support desk tool and RSPOR_SETUP I notice the errors in RSPOR_SETUP appear green in support desktool such as User mapping (step 12) appears green in support desktool but red in RSPOR_SETUP.
Please suggest.
Best regards.Hi,
If Support desk tool is showing some of the components undefined, than there may be posisbility that your ABAP BI and BI JAVA patch may not in sync.
ABAP BI and BI JAVA works only with specific patch set combinations. I will suggest that please refer to below note and correct the patch level, if required. Once the patch level is corrected, please run the support desk tool again, you will see new picture in support desk tool.
"SAP Note 1013369 - SAP NetWeaver 7.0 BI - intermediate Support Packages"
With Regards,
Saurabh -
How to active ABAP Proxy in SAP system.
Hi All,
I want to work with ABAP proxies.How to active ABAP proxy in SAP system.What the configuration is needed.Is there any configuration is need in XI system to work with ABAP proxies.Please help me..
Thanks,
Kishan.Hi Kishan,
You have to check whether ur r/3 system's(WAS 620 or above) excahnge profile has entries for integration builder.
Pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is:
http://r3servername:5<instance>00/exchangeProfile
I hope this provides you a solution.
Regards.
Praveen -
PI 7.11 sp6 system copy Exchange Profile error code: 399
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICKHere is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre>
Maybe you are looking for
-
Hi, I would like to use a system variable in a query in the where clause. How can i use it? Thanks in advance: Bianca
-
So far pleased with Verizon!
So far i'm pleased with verizon. Ordered my DROID X 7/24 CSR said it whould ship Monday the 26th. I knew something was wrong with that. After calling back on Monday, CSR said it'll be shipped on 8/3. So i call back again today, about 2 hours ago to c
-
Update failed for Adobe Extension Manager CS5 5.0 and Adobe Pixel Bender Toolkit 2.5
Here are the error codes. Adobe Pixel Bender Toolkit 2.5 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207 Adobe Extension Manager CS5 5.0 Update There was an error downloading this update. Plea
-
ERROR :ncWaitfor​State: Unknown Status -107438899​1
This is the error code I recieve while using the VB sample application. From that point, using the ncRead will give a similar response. This is a one channel PCI-CAN card. All diagnostics check O.K. There are no other errors up to this point while op
-
ErrorDisabled status on a Cisco Nexus 5020 NX-OS 5.0(2)N2(1)
Any ideas how to NOT USE errdisable or allow the FCoE switch to put a port / interface / VFC into an error disabled state? I do not see any command(s) to NOT use this feature. thanks matt