How to enable ABAP Mapping Program in Integration Builder

i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
After releasing it in DEv, it should go through request number.
but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
plz  tell me what to do.
regards
sreeni

Hi kancham sreenivasulu ,
These web-sites may help u solving u'r problem:
How 2 connect non SAP RFC-Programs with XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
cheers!
gyanaraj
*****Pls reward points if u find this useful

Similar Messages

  • ABAP MAPPING PROGRAM TRANSPORTATION ISSUE

    Hi Experts,
    Our issue is as following:
    Already one ABAP mapping program is there in our DEV and in QA also.
    Now we have changes the code according to some requirement.
    Now we need to reflect the same in QA also.
    For that I have certain doubts.
    1) after releasing the request number in R/3, will it effect there in integration builder of the QA?
    2) Is there any need to do in ADMINISTRATION to reflect the same?
    Please revert urgenly.
    Regards
    sreeni

    hi barry,
    thanks a lot . we have released it into integration it is working fine.
    thanks once again and i wll reward points also.
    I think you can tell my one more doubt is as:
    I have one new ABAP mapping program which is not used till now in any interface mapping in ID of XI.
    now want use this my integration builder ID in as mapping program.
    in this case is any requirement to enable the same in Integration ADMINISTRATION tab.
    plz clarify me.
    regards
    sreeni

  • How AAE call the mapping program?

    Hi Experts,
    i almost have no experience on using AAE. after reading some documents i still have the below questions,
    1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
    2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
    3. in some documents "persistence" is discussed, can someone help me into more details?
    thanks in advance. hope these could be explained.

    > 1. mapping program is happened in integration engine, while AAE is used for integrated scenarios without going into integration engine, then how to execute the mapping program?
    When you implement AAE,Adapter engine will execute your mapping program,that means AE has the capailities , they have copied moved routing ,mapping  features in AE,so no need to interact with IE.
    > 2. till now all the work i have done is using the common scenario, then for which scenarios i can suggest my client that "we should use integrated scenario , and there is no 'side-effect' of using is instead."
    There is no side effects at all,but there are some limitations like in PI7.1 monitoring not possible,ABAP PRoxy,look ups will not supported and only supports AE adapters communication.
    PI7.1 EHP1 some enhacements happend on the same
    search in sdn.
    > 3. in some documents "persistence" is discussed, can someone help me into more details?
    can you explain bit more..
    Regards,
    Raj

  • How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).

    Hi,
    I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
    Can anybody please point me the location, to look for, or post the document.
    Thanks,
    Namadev

    Hi Namadev Chillal  ,
    These r the links containing PDF docs which u r looking for:
    how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    Excellent PDF Document on Mapping
    http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
    Mapping Development with the ABAP Workbench
    http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
    ABAP Mappings
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm

  • How to get ABAP mapping option in Interface Mapping

    Hi
    experts
    How to get ABAP mapping option in Interface Mapping . i need to do abap mapping . i didnt find the option
    plz help me

    Hi,
    If u2018ABAP-classu2019 and u2018XSL(ABAP ENGINE)u2019 does not appear under the u2018Mapping Program Typeu2019 in Interface Mapping, one has to make an additional entry in the Exchange Profile. 
    Only a user with the J2EE security role (administrator) can make the following settings in the Exchange Profile.
    It is achieved in the following manner:
    1) Open http://<host>:<port>/exchangeProfile/index.html
    2)Choose IntegrationBuilder ->IntegrationBuilder.Repository -> com.sap.aii.repository.mapping.additionaltypes
    Add: R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
    To check whether the data has been successfully read from the exchange    profile:
    1- Open http://<host>:<port>/rep/support/admin/index.html
    2- Choose Administration of Properties -> All Properties
    3- If the value associated to parameter com.sap.aii.repository.mapping.additionaltypes is not visible, press REFRESH button
    After doing above check in IR, if still don't find the option for ABAP mapping then refresh the cache.
    Award points if useful.

  • How to enable ABAP maaping in Exchange Profile.

    Hi Guys,
                 Where and how can I enable ABAP mapping in exchange profile?
    Regards,
    XIer

    Hi,
    See this document. It has shown how to enable it in exchange profile:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
    Regards,
    ---Satish

  • Can somebody post link to How to Use ABAP-Mapping in XI 3.0?

    Hello,
    can somebody post a real link to the document How to Use ABAP-Mapping in XI 3.0. All the links to this documnet in the existing posts are not valid.
    Thanks for your information
    Jayson

    Hi
    Following weblog might help you.
    Testing ABAP Mapping - Testing ABAP Mapping
    XML DOM Processing in ABAP part I -  Convert an ABAP table into XML file using SAP DOM Approach.
    /people/r.eijpe/blog/2006/02/19/xml-dom-processing-in-abap-part-iiia150-xml-dom-within-sap-xi-abap-mapping
    SDN TV demo to create and test ABAP mapiing - https://media.sdn.sap.com/SDNTV/main.asp?mediaId=128
    How to guide for ABAP mapping.
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&
    Also check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
    Testing ABAP Mapping
    Using ABAP XSLT Extensions for XI Mapping
    Thanks
    Gaurav
    Edited by: Gaurav Bhargava on Oct 9, 2008 6:27 AM

  • SAP XI 30: Enable ABAP Mapping

    Hi everybody,
    we are on XI 30 and want to enable ABAP-Mapping.
    What do we have to do?
    regards Mario

    Hi,
    Just Open http://<host>:<port>/exchangeProfile/index.html
    Choose IntegrationBuilder -> IntegrationBuilder.Repository ->com.sap.aii.repository.mapping.additionaltypes
    Maintain the following entry:  R3_ABAP|Abapclass; R3_XSLT|XSL (ABAP Engine)
    The ABAP Mapping would be enabled.
    Regards,
    Chandra
    Edited by: sunil chandra on Sep 11, 2008 5:21 PM

  • How to enable document map in SSRS Report Manager

    Hi Team,
    How to enable Document Map in SSRS Report manager 2008 version.
    laxman

    Hi kumarj4009,
    As per my understanding, you created a Document map, it works fine in Business Intelligence Development Studio (BIDS), but you could not view the report in report manager.
    After we create a report in Visual Studio, we need to publish it to a report server to make it available to users. In Report Designer in Business Intelligence Development Studio, we must specify the report server as well as folders for reports and shared
    data sources so that we can publish the items in a project. For detail information, please refer to the following steps:
    Right-click the report project, and then click Properties.
    In the Property Pages dialog box for the project, select a configuration to edit from the Configuration list.
    In OverwriteDataSources, select True to overwrite the data source on the server each time reports are published, or select False to keep the data source on the server.
    In the TargetDataSourceFolder text box, type the folder on the report server in which to place the published shared data sources.
    In the TargetReportFolder text box, type the folder on the report server in which to place the published reports.
    In the TargetServerURL text box, type the URL of the target report server, then click OK.
    Right-click the report in the project, then click deploy, after the report is successfully deployed, you can preview the report in report manager.
    For more information about Set Deployment Properties, please refer to the document:
    http://msdn.microsoft.com/en-us/library/ms155802(v=sql.100).aspx
    If there is any misunderstanding, please feel free to let me know.
    Thanks,
    Wendy Fu

  • How to test ABAP mapping used in a Integration Process node

    Hi,
    anyone can suggest me how to debug an ABAP mapping used into a transformation node belonging to an Integration Process ?
    Thanks.
    Francesco

    Hi, Francesco.
    I've debugged ABAP Mapping with SXI_MAPPING_TEST transaction.
    If you have creted a scenario including your ABAP Mapping, you only hace to put the correct sender/sender interface and receiver/receiver interface. You have to put some XML document as an input.
    I wrote in my code the Break-point instruction an debugged the process without problems.
    regards,
    Francisco

  • How to Call abap functn/program from java layer

    Hi all,
        I have to develop a program which has to call abap function/program from java side or how to call a abap program through java ..
    pls send me related links or explanations.. dont send unrelated answers..
    Regards,
    Arivarasu S

    Hi,
    You mean accessing ABAP functions from J2EE perspective, then I think we can do this by using SAP Java Resource Adapter and also through webservices.
    SAP Java Resource Adapter (SAP JRA) can be used as an add-on for the SAP JCo SAP JRA enables the implementation of standard interfaces from diverse J2EE servers to the SAP JCo in the SAP Web AS. The SAP JRA thus simplifies
    communication with ABAP within heterogeneous J2EE landscapes.
    Go through the following links which has Good documentation on how to achieve this
    Accessing BAPIs Using the SAP Java Resource Adapter
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4]
    Connectivity and Interoperability
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/326d82e5-0601-0010-fca4-9caf27b89c26]
    Finally with WebServices. Accessing SAP Business Functions (ABAP) via Web Services
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/06adbf03-0a01-0010-f386-d8e45561a3c4]
    Regards
    Raghu

  • ** How to debug ABAP Mapping at run time?

    Hi Friends,
    We have created one class using the interface IF_MAPPING and the method EXCUTE. Inside the class we have written coding. We refer this class in the interface mapping as mapping program. But, while execute the scenario, how do I debug my class ? (If it is proxy, we will mention the user name in XI adpater CC, refer the same user in ABAP external debuggine, but in the abap mapping class how do i refer..?
    Kindly help me friends.
    Kind Regards,
    Jeg P.

    Hi,
    maybe you could do it like described in this thread:
    Error when using ABAP mapping
    Regards
    Patrick

  • How to debug ABAP mapping

    Hello
    I've built a ABAP mapping based on How To convert an IDoc-XML structure to a flat file and vice versa in XI 3.0, however it runs into exeception when I tested it in SXI_MAPPING_TEST with error;
    - <cls:CX_SY_NO_HANDLER id="o265">
    - <CX_ROOT>
      <TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
      <PREVIOUS href="#o266" />
      <KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
      <IS_RESUMABLE />
    - <INTERNAL_SOURCE_POS>
      <PROGID>217</PROGID>
      <CONTID>5192</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_NO_CHECK />
    - <CX_SY_NO_HANDLER>
      <CLASSNAME>CX_SY_REF_IS_INITIAL</CLASSNAME>
      </CX_SY_NO_HANDLER>
      </cls:CX_SY_NO_HANDLER>
    I want to debug into the mapping class, someone said jsut set break point in the mapping class and run sxi_mapping_test, then I would be able to debug. However this doesn't work, the execution doesnot stop at the break point (I set session break point, not external break point). Somebody can help?
    Thanks
    Eric

    The trace I got is like:
      <?xml version="1.0" encoding="iso-8859-1" ?>
    - <Top>
      <First>BeginTrace</First>
      <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
      <Trace level="2" type="T">......attachment XI_Context not found</Trace>
      <Trace level="3" type="T">Mapping is determined</Trace>
      <Trace level="1" type="T">Interface Mapping http://mynamespace/xi OM_Order_to_Simple</Trace>
      <Trace level="3" type="T">Object ID of Interface Mapping F1B943B7E3EB382FB1334066F113E0E6</Trace>
      <Trace level="3" type="T">Version ID of Interface Mapping EAA847208A4B11DD96D8F1C80AD60A0B</Trace>
      <Trace level="3" type="T">Mapping Steps 1 R3_ABAP Z_ABAP_MAPPING_IDOC_TO_FLAT</Trace>
      <Trace level="3" type="T">MTOM Attachments are Transferred to the Payload</Trace>
      </Top>

  • How to test ABAP Mapping

    Hi,
    In the Interface Mapping there is an option to test the
    map. But it is not for the ABAP Mapping.
    How can we test ABAP Mapping ?
    rgds,
    RM

    Hi Ruby
    What kind of scenario are you working on, IDOC to file, file to IDoc or what.
    Depending on the scenario you have created, enter all the details such as Sender Service, Receiver Service etc in the transaction SXI_MAPPING_TEST (in your XI box).
    The next step is for you to enter your source XML file, if it is a file to IDoc scenario enter your source xml file. If it is a IDOC to file scenario, then enter the XML payload.
    And once you execute it you will be able to test your mapping and see if it successful or not.
    cheers
    Sameer

  • Looking for How To Guide ABAP Mapping

    Hi folks!
    I'm looking for a good how-to guide for abap mapping.Do you know any resource to look for?
    thanx in advance.
    Regards,
    Marc

    >
    Marc Eckhardt wrote:
    > Hi folks!
    > I'm looking for a good how-to guide for abap mapping.Do you know any resource to look for?
    > thanx in advance.
    > Regards,
    > Marc
    Resource is SDN Search option
    ABAP mapping
    regards,
    Abhishek.

Maybe you are looking for