How to Enable Administration label in Publisher.

hi
i m quite new, in Publisher Administrator Lable is Disabled, i have to create new JDBC connection. plz let me know how to enable it.
Thanks

Hi,
You need these atleast
telnet
ssh version 2
ssh
ASA(config)# crypto key generate rsa modulus 1024
In the above you specify the source network where you are going to connect to the ASA. The source interface is also mentioned. This is the interface behind which the users are located. It might typically be "inside" and/or "outside". You can enter multiple statements if you are managing from multiple different networks.
For example
telnet 10.10.10.0 255.255.255.0 inside
ssh 10.10.10.0 255.255.255.0 inside
ssh 1.1.1.1 255.255.255.255 outside
In addition to this you can naturally configure local AAA on the ASA so you can use a username/password to authenticate.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Similar Messages

How to enable group label selectable on combo box?

When we use the combo box, we can group the items as following
group 1
item 1 1
item 1 2
group 2
item 2 1
item 2 2
How to enable user select the group 1 instead of select both item 1 1 & item 1 2 ?
In the jsf rendered result, group 1 & group 2 just a label and not selectable option, we want change it to selectable option.
Thanks

When we use the combo box, we can group the items as following
group 1
item 1 1
item 1 2
group 2
item 2 1
item 2 2
How to enable user select the group 1 instead of select both item 1 1 & item 1 2 ?
In the jsf rendered result, group 1 & group 2 just a label and not selectable option, we want change it to selectable option.
Thanks

How to enable administrator account in windows 8

I need Administrator Account access to install SQL server 2005 in Windows 8 and I tried all Possible or given solution in PC but I'm not succeed to enable this account.. I tried lusrmgr.msc also but there is nothing option.
Mainly I couldn't find the option Local User and group management option in Windows 8..
and also i tried from cmd by net user administrator /active:Yes
but command displays access denied

Hi,
Please try this to enable CMD on logon screen:
http://www.askvg.com/how-to-launch-command-prompt-or-other-programs-using-ease-of-access-button-at-login-screen-in-windows-vista-and-7/
Then, try to enable built-in admin account.
net user administrator /active:Yes

Enable Administrator Account in Win7 Pro

I am using Windows 7 Professional 32-bit (6.1, Build 7601).
When I had installed fresh windows 7 Pro on my laptop, at that time Administrator account was disable by default and I erroneously deleted administrative privileges of logon account which was created during installation.
Now, when I install, un-install program or perform any task which require administrative privileges then I can’t perform any operation without administrator account. Means, I am totally unable to perform administrative task.
So, please help me, how to enable administrator account whereas I logon by user or power-user account or otherwise.
Co-operation by anyone will be very thankful.

Hi,
Please try this to enable CMD on logon screen:
http://www.askvg.com/how-to-launch-command-prompt-or-other-programs-using-ease-of-access-button-at-login-screen-in-windows-vista-and-7/
Then, try to enable built-in admin account.
net user administrator /active:Yes

How to enable the "update file" button to update the data template

We have an escalated customer bug that the chinese character does not display correctly on report. We want to update the data template xml file on customer site to test the fix. However, when the customer login using "XML publisher Administrator" responsitility, select function "Data Definitions", search and then update the definition, on the update page, the button "update file" next to "Data Template" is disabled. Anyone know how to enable the button?
screenshot at:
ftp://bugftp.oraclecorp.com/upload/bug6649637/CannotUpdate.doc
Thanks,
Wei

Unless until it is a Manual Journal, SLA page doesn't give you the provision to change them.
Even for Manual Journal, it won't allow you to change, if that is transferred to GL.
Only option is to UNDO the accounting and correct the setup to create correct journals. You may contact Oracle Support.
By
Vamsi

How to Enable MMS without BIS

How to enable MMS without BIS
This guide is for you if:
you have an BlackBBerry OS 7 device on a regular (non-BIS) data plan
and
2. you cannot send MMS (multimedia) messages.
Getting MMS working requires you to split, hex edit, merge and install service books, so read through the instructions and decide whether you’re up to it. I’ve attempted to explain everything as clearly as possible, but it’s a complex process and requires you to follow instructions carefully.
It's worth asking your carrier if they can just enable MMS for you. If they can and will, you don't need this guide.
Notes:
The process described here may also work on earlier devices with OS 4, 5, and 6, but I don’t have those devices to test.
Many carriers require you to have a data plan in order to send MMS messages. If you don’t have one, this guide may not help you.
Depending on your cellular plan, sending MMS messages may involve extra charges.
Preparation: Before You Get Started
Software
First, you need some tools to do the work. Download and install these three programs on your computer:
MagicBerry 3.5 (here)
A Hex editor (I like HxD, here)
BlackBerry Desktop (link)
Service Books
You will also need a copy of the service books attached to post #1 in this thread over at CrackBerry. Extract the contents of the .zip file to a location of your choice.
MMS Configuration Information
Once you have the tools and service books, you need to get the MMS configuration information from your cellular carrier.
Specifically, you need three settings: MMS Proxy, MMSC, and APN. Search on Google for something like, “MMS settings for [insert your cellular carrier’s name here]” and you should find them. Note that you also need the port number for the MMS Proxy. It should be there on the settings page.
Note: if the port number for your MMS Proxy is in the 9000s, this process probably won’t work, since your cell carrier may be using the older WAP 1.2 specification. If anyone runs across this, let me know, and I’ll try to help you out.
A Note on MagicBerry
MagicBerry is an .ipd file editor. Service books, like the ones responsible for MMS, are .ipd files. The logical conclusion would be that you could edit service books with MagicBerry. But MagicBerry only shows you certain pre-set fields within the .ipd file. As a result, you can't see or edit a lot of the information in the service book. Even worse, if you do edit a service book file with MagicBerry, that unseen information is not saved, so you end up deleting it and rendering the service book useless.
MagicBerry does have good uses, though: it splits and merges service book files perfectly. In fact, it is the best tool for splitting and merging service books, which is why you downloaded a copy.
Due to MagicBerry’s limitations, you’re going to edit the files with the hex editor.
Let’s get started!
The MMS How-to Guide
Step 1: Split the .ipd Files
Start MagicBerry, click File > Open, and open the tmo_servicebooks.ipd file.
Click Manipulate > Split.
Tick the box for the MMS Config 2.0 file.
Press “Split Selected,” enter a file name (and select a directory, so you know where the file is being saved), and press “Save.” Name the file “MMS_Config_20” so that you easily recognize it.
Note: there are "MMS Config" and "MMS Config 2.0" service books in the tmo_servicebooks.ipd file. Make sure you select the 2.0 version.
Step 2: Hex Edit the MMS Config 2.0 File
Now, start your hex editor and open the “MMS_Config_20.ipd” file. It will look like this, without the highlights and bolding. I’ve added those so that it will be easier to provide instructions on editing.
Hex Editing Basics
In the HEX editor, the blue numbers don’t matter to you (they’re just column and row labels). Only the black ones are part of the file.
The bytes (the two-character pairs) on the left side are all numbers, expressed in hexadecimal or “base-16”. The same information is expressed in ANSI characters on the right side.
The basics of hexadecimal numbering are that you count as follows:
Base-16 (hexadecimal): 1 2 3 4 5 6 7 8 9 A B C D E F 10
Base-10 (decimal): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
So in the two-character byte pair, 0D = 13, 1F = 31, 50 = 80, etc. If you can figure out those conversions, you’re good. If not, google hexadecimal numbering, and spend some time at a lesson. You need to understand how hex works to do this. There are also decimal to hexadecimal converters online. Use them to check your work, or to do the conversion work for you.
You can edit the file from either side of the hex editor. As you edit the information on one side, you’ll see it automatically changing on the other as well.
It’s easier to edit the information in the green, turquoise, and red fields on the right side.
The information in the grey, yellow, and pink fields must be edited from the left (hex) side, because it’s the hex value that matters, and it shows up as periods or jibberish on the right side. All those “dots” on the right side are not identical when you look over at the left side. They’re actually very different values. The nonsensical letters on the right side are likewise meaningful values on the left side.
It’s not a bad idea to just spend some time playing around in the hex editor before you move on. When you’re done, close the file without saving it, and the changes you make while experimenting won’t be made permanent.
Editing the File
The green blocks: enter your MMS proxy in each one, with the port number following the colon. Add to or delete bytes from the highlighted field if necessary, but whatever you do, do not write over or delete bytes outside the highlighted field! Those bytes contain necessary information, and if they are not there, the service book will not work. The same rule holds true for all of the other edits. You must stay within the highlighted fields. To delete bytes, just press delete. To insert bytes, position the cursor, and go to Edit > Insert Bytes on the menu bar, and choose the number of bytes to insert. If you’re using HxD hex editor, ctrl-z will undo a mistake. It also makes your changes in red, which makes them a little easier to follow. As with all programming, the work has to be perfect. There can be no mistakes. Check everything you do carefully.
The turquoise block: enter the MMSC address here.
The red block: enter your APN here.
The yellow blocks: total number of bytes in the highlighted green, turquoise, or red range that follows. Adjust it when you’ve finished editing. The number must be expressed in HEX of course. Use a decimal to hexadecimal converter online if you prefer that.
The pink blocks: the total number of bytes in the bolded range that follow (again, in hex). Adjust it when you’re finished editing the field.
The grey block: a count of the total number of bytes that follow it. In the original file, the value is 30 01 00 00, which breaks down as: 30(hex)=48 01(hex)=256. The total (48+256) is 304. If the number of bytes following the grey block was less than 256, there would be no 01 in the second place. For example, if there were 226 bytes following the block, the grey block would look like this: E2 00 00 00. When you are finished editing the entire file, go back and adjust the number in the grey block accordingly.
Once you’re done, save the file.
Step 3: Merge the MMS Config 2.0 and Wap Push Config Service Books
Open the “MMS_Config_20.ipd” file in MagicBerry
Once you’ve opened the file, click Manipulate > Merge.
Tick the box for the MMS Config 2.0 file.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots.
Choose the tmo_servicebooks.ipd file.
Tick only the box for the “Wap Push Config” service book.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Close MagicBerry
Step 4: Backup Your Phone
This is mandatory. You’ll need the backup file for step 6.
You need to have BlackBerry Desktop installed on your computer. If you haven’t done that yet, do it.
Connect your BlackBerry device to your computer with a USB cable. If BlackBerry Desktop does not start automatically, start it.
Do a backup. Just hit “Back up now” and follow the prompts. Do a full backup. Once you’re done, go to step 5.
Step 5: Merge the combined MMS Config 2.0/Wap Push Config service book file with your existing service books
Open MagicBerry
Press File > Open and at the bottom of the Open dialogue window beside the File name box, change “IPD Files (.ipd)” to “BBB Files (.bbb)”. Navigate to the folder where you stored your backup, and open it. It might take a while to open.
Click Manipulate > Merge.
Go down the list on the left hand side and tick the checkboxes for the service book entries (they will be way down). If there are service books listed for MMS Config or Wap Push Config, uncheck those boxes.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots. Choose your merged MMS Config 2.0/Wap Push Config file.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Optional: You can merge the newly created file again with any other service books you may need – such as the Anworm service books for the browser mentioned in my thread on CrackBerry. Just follow the process used in step 3.
Step 6: Install the Service Books to your phone:
Connect your BlackBerry to your computer with a USB cable if it isn’t still connected.
On your BlackBerry, go to Options > Device > Advanced System Settings > Service Book
Hold down the “Alt” key and press S B E B. You should see a message that says, “Legacy SB Restore Enabled.” Press Okay.
On your computer, open BlackBerry Desktop.
Go to Device > Restore.
Press “Change” and navigate to the folder with the merged .ipd file you created. Press “OK.” You should now see the file listed in the Restore window.
Click on the merged .ipd file you created to select it.
Under the heading “Select Data to Restore,” select “Select Device Data and Settings” and then tick the box for “Service Book.” This step is really important. Make sure it's done right. If you screw it up you could end up wiping a lot of settings and data.
Press “Restore” and answer “Yes” to the confirmation dialogue.
Close the BlackBerry Desktop software, disconnect your device, and do a battery pull to reboot.
Voila! If everything went well, you should have MMS capabilities. Test your ability to send and receive multimedia by sending yourself a picture message. You should receive the message within about 10 seconds.
If it doesn’t work, go back and make sure EVERYTHING in the file is done perfectly. If you find a problem, fix it, merge the files again, and reinstall the service books.
Solved!
Go to Solution.

Why not just ask carrier to enable MMS? I know T-Mobile can and will do it, even if there is no data plan at all on the line. We did it for my daughter and I know T-Mobile has done it for others. I assume other carriers do the same, but don't know....Which is why I ask.
- Ira

How to print output of XML Publisher report in different trays of a printer

Hi All,
I have a requirement in XML Publisher Report. I need to print all pages other than last one in one tray of a printer and the last page has to be printed in another tray of the same printer.
Can anyone help me out...
Thank You..

I do not think it is possible to send all the pages to one tray and send only the last page to a different tray. However, you may review the following notes:
Note: 357402.1 - How to Print the Output to a Different Paper Size Using XML Publisher Delivery Manager?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=357402.1
Note: 394130.1 - How To Enable Printer Options Such As Duplex Printing Or Tray Selections For Bitmap Concurrent Programs
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394130.1

How to share administrator iPhoto library with other users on same iMac?

How to share administrator iPhoto library with other users on same iMac?

This is the part I'm referring to:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
The library stays in the Pictures folder for this.

How to enable trackpad tap to click windows 7 64 bit macbookpro mid 2009

how to enable trackpad tap to click windows 7 64 bit macbookpro mid 2009:
The following link has a solution for 32 bit but not 64 bit, is there a new update that works for 64 bit??
https://discussions.apple.com/thread/2308135?threadID=2308135

Hi Rhondavas77,
To enable/disable Just-In-Time debugging
On the Tools menu, click Options.
In the Options dialog box, select the Debugging folder.
In the Debugging folder, select the Just-In-Time page.
In the Enable Just-In-Time debugging of these types of code box, select or clear the relevant program types:
Managed, Native, or Script.
To disable Just-In-Time debugging, once it has been enabled, you must be running with Administrator privileges. Enabling Just-In-Time debugging sets a registry key, and Administrator privileges are required to change that key.
Click OK.
More information is here.
http://msdn.microsoft.com/en-us/library/k8kf6y2a(v=vs.85).aspx
Best Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable "top level navigation " in portal

Hi all,
I am unable to see the "top level Navigation" once I logged on to portal
Previously I was able to see that
I performed the following steps thats the reason why I am unable to see "top level navigation"
1 Logged on to portal
2 Content administration
3 Expanded Poratl Content
4 Expanded Content Provided by SAP
5 Expanded End User Content
6 Expanded Standard Poratl Users
7 Selected "Default Frame work Page"
8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
Thanks in advance

undo the changes what you have done.
after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
Thanks
GLM

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable the Exchange 2010 Admin Audit logs in Event Viewer

How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support

How to Enable Loopback Processing in W2K8

How to Enable Loopback Processing in Windows Server 2008. I am unable to find following:
In the Group Policy Microsoft Management Console (MMC), click Computer Configuration.
Locate Administrative Templates, click System, click
Group Policy, and then enable the Loopback Policy option.
http://support.microsoft.com/kb/231287

> I don't understand why you would respond with the name of the setting,
> without describing the path to it. As far as I can tell, there is no
> search function in the Group Policy Management Editor to serach for the
> name. Is it too much to ask for the precise location?
That's why MSFT provides
http://gpsearch.azurewebsites.net/ :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to enable background color printing?

how to enable background color printing?

There is no button involved in the following code, but it may
be of use to you:
<?xml version="1.0"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="init()">
<mx:Script>
<![CDATA[
private var origColor:uint;
private function init():void {
origColor = dc.getStyle("selectionColor");
public function setBackGrdColors(newColor:uint):void {
dc.setStyle("selectionColor", origColor);
if(dc.selectedDate){
var dayOfWeek:Number = dc.selectedDate.day;
else{
return;
switch(dayOfWeek) {
case 0:
if(sun.selected)
dc.setStyle("selectionColor", newColor);
break;
case 1:
if(mon.selected)
dc.setStyle("selectionColor", newColor);
break;
case 2:
if(tue.selected)
dc.setStyle("selectionColor", newColor);
break;
case 3:
if(wed.selected)
dc.setStyle("selectionColor", newColor);
break;
case 4:
if(thu.selected)
dc.setStyle("selectionColor", newColor);
break;
case 5:
if(fri.selected)
dc.setStyle("selectionColor", newColor);
break;
case 6:
if(sat.selected)
dc.setStyle("selectionColor", newColor);
break;
default:
break;
]]>
</mx:Script>
<mx:VBox horizontalAlign="center" verticalGap="20">
<mx:DateChooser id="dc" textAlign="left"
change="setBackGrdColors(cellColor.selectedColor)"/>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="sun" label="Sun"/>
<mx:CheckBox id="mon" label="Mon"/>
<mx:CheckBox id="tue" label="Tue"/>
<mx:CheckBox id="wed" label="Wed"/>
</mx:HBox>
<mx:HBox width="100%" horizontalAlign="center">
<mx:CheckBox id="thu" label="Thu"/>
<mx:CheckBox id="fri" label="Fri"/>
<mx:CheckBox id="sat" label="Sat"/>
</mx:HBox>
<mx:HBox width="300" horizontalAlign="center">
<mx:Label text="Background Color" />
<mx:ColorPicker id="cellColor"
selectedColor="#FF00FF"/>
</mx:HBox>
</mx:VBox>
</mx:Application>

How to enable Channel 13 on WET54g

I am using it in Europe and need to enable channel 13 so I can connect to a network on this channel. I vaguely remember being told this was done by accessing a hidden setup page. Can anyone tell me how to enable channel 13 on a WET54g V3.1?

perita wrote:
Thanks for your reply.
>> Generally, devices bought in the U.S. can only be used in the U.S.
This seems to me like poor and outdated policy. It reminds of times when you could not take a laptop to Europe because the power supply was only for 110 V. Most manufacturers have moved to simplifying things for the customer and for themselves by making models more universal.
>> Flashing other firmware may brick the device. You can never rule that out.
>> Flashing European firmware should not cause problems.
>> Possibly it won't accept it but usually hardware versions between countries are identical.
You say it should "not cause problems" but "may brick the device". I would consider a bricking the device to be a "problem". I guess I can interpret it to mean that damage is unlikely but possible. It gives me pause as I do not want to risk bricking it.
The device label says it is WET54g V 3.1 At the US site http://homesupport.cisco.com/en-us/support/bridges/WET54G the choice for hardware version only goes up to V 3.0. Puzzling.
At the European site http://homesupport.cisco.com/en-eu/support/bridges/WET54G/download I found support for version 3.1. Interesting and puzzling since my 3.1 is American.
There, in the EU site, I found a file named WET54Gv3_1_v2d16.zip which contains two files:
- wet54gv3_v2d16_us_20091027.img
- wet54gv3_v2d16_ce_20091027.img
There is no explanation in the release notes of which one to use. The names differ only in two characters: us/ce. I would assume "us" is for USA but what would "ce" be? I was expecting something like "uk" or "eu". I am guessing the ce version is for Europe but I want to be sure before I start messing. I have never flashed anything and I have no idea of the degree of risk involved.
You can reload it with this firmware wet54gv3_v2d16_ce_20091027.img.

How to Enable Administration label in Publisher.

Similar Messages

Maybe you are looking for