How to Enable ahci in bootcamp windows 7

II've got a early 2011 17in MacBook Pro updated to the newest maverick os
ive installed the newest bootcamp software and loaded windows 7 ultimate
i I just upgraded my internal hard drive to a ssd
how can I enable ahci for windows without being able to go into my bios?

You can check to see if SERVEROUTPUT is ON for your environment by typing the following at the SQL*Plus prompt
SQL > show serveroutput
serveroutput ON SIZE 1000000 FORMAT WRAPPEDIf it's OFF like shown below:
SQL > show serveroutput
serveroutput OFFThen all you have to do to enable it is:
SQL > set serveroutput onHope this helps!

Similar Messages

How to enable kiosk mode on windows 7

hi
How to enable kiosk mode on windows 7 ?
i need to a sample that when windows be load Disable below things
Task Manager
Driver
Task Bar
Combine Keys for example (Alt + Tab , Alt + F4 and ....)
please help me for solve it
it's urgent
thanks

Hi vahidbakhtiary,
As the reply from Monkeyboy, you could modify registry settings on systems to achieve what you want. There are many demo code online which showed us how to modify registry settings.
hi
How to enable kiosk mode on windows 7 ?
i need to a sample that when windows be load Disable below things
Task Manager
Driver
Task Bar
Combine Keys for example (Alt + Tab , Alt + F4 and ....)
please help me for solve it
it's urgent
thanks
These options might be dangerous. If someone who knew nothing about the program with this function and he uses this program, it might hurt his system. Since this, it would be better not to post this code in the forum to avoid someone tried the code and hurt
his system.
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

How To Enable AHCI For Windows 7?

I'm trying to get my Samsung 840 Evo SSD to enable AHCI, but have been reading and it appears to be more difficult than a few simple changes. I have an Early 2011 15" Macbook Pro. How do I get AHCI enabled for Windows 7?
Thank you in advance.

Thank you for the link. I'm still not sure what needs to be done. I made the changes in 'regedit' like the forum stated, but am still having issues. I will post screenshots below that are showing up. More assistance would be greatly appreciated.

Dv6-6135dx - How to Enable AHCI in bios for use in Windows 7 64bit

I bought the dv6-6135dx notebook some time back.
I recently got a Solid State Disk and I would like to turn on the Trim, feature.
To turn Trim on I need to enable AHCI. There is no such option in bios. How can I turn AHCI on?
I found an unlocked version of the bios that turns on apparently disabled menus, but that may or may not corrupt the bios and I'd like to not have to resort to that.

Hi,
It's there by default, why do you need to enable it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

Hello,
I upgraded my hard drive to a SSD and that is done. Laptop works fine. Installed the Samsung SSD software and it says I need to Enable AHCI to get the SSD running at full potential.
I searched the BIOS and do not see anyplace to change this. I then went to the Device Manager in Windows 8.1and I do not see any ATA/SATA controller. All I see is a RAID controller. RAID controller in a laptop?
Can someone tell me how to enable the AHCI?
Thank you.
This question was solved.
View Solution.

Hi:
Because your notebook is a consumer notebook there is no way to change the BIOS setting to AHCI.
The BIOS is defaulted to RAID on your model series because some models come with one of those hybid drives with a SSD cache and for some technical reason those have to be configured in RAID 0 mode in order for the setup to work right.
It is my understanding that if you install the latest Intel RST driver, that is supposed to provide TRIM support for SSD's starting with the Intel Series 7 chipset, and yours has the series 8, so it should have full support for using an SSD even in RAID mode.

How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
Your help is very much appreciated.
Thanks in advance.

control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

How to Enable AHCI mode in BIOS for HP Pavilion g6 1240se

i want to enable ahci but no option about it in bios

Step 01: Restart the Notebook and start tapping F10 during the startup
Step 02: Please go to System Configuration after entering the BIOS
Step 03: Check if you have SATA Emulation under System Configuration
Note: If you dont have SATA Emulation we cannot choose AHCI Mode option
Step 04: If you have SATA Emulaion, highlight the same and select the relevant option Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

How can enable switchable graphics in Windows 8.1 (Bootcamp)

So I just dropped $3,000 on a high end (late 2013) 15" rMBP and immediately installed Windows 8, and then 8.1, through Bootcamp. I need Windows for a lot of engineering programs, as well as occasional gaming. I bought a MacBook because I prefer OSX for programming - I love Ubuntu, but my previous laptop had driver issues (ironically enough, also due to the graphics card) that would cause it to overheat and only give me about 45 minutes of battery life.
After using it for a little, I realized that the MacBook was VERY hot. I closed all of the power intensive applications and proceeded to browse reddit on low brightness and power saving settings to let it cool down, but it did not cool down much. I shut it down, and turned it on about 15 minutes later, when it had successfully cooled down. I realized that just being booted into Windows caused the laptop to get unreasonably warm - I'm assuming that it's because I have the Nvidia GeForce GT 750M graphics card in it. I can not seem to find an option to enable power saving graphics.
Is there any way to use the integrated Intel graphics rather than the discrete card? Not being able to run Windows reasonably well would really make me regret this purchase, especially when I could have bought a different laptop for much less and installed a Linux distro on it.
Any help is appreciated.

Sorry, but I think the above post is bad advice. It's unlikely to be a fan issue as these are generally controlled by firmware. If your laptop is getting very hot in Windows with only minimal and light use then that suggests a power management issue.
The first thing you'll want to do is check that your Power Management settings are not set to "High Performance". A lot of people select this option thinking it gives them the most out of their computer and hardware purchase without realising what it does and that it comes with significant issues and tradeoffs.
What the High Performance setting does is disable CPU throttling, forcing the CPU to run at its maximum speed constantly (on all cores) and draw its maximum power load, even when not required. This causes the laptop to heat up very hot very quickly even if you aren't doing much, while simultaneously killing battery life. If you found a way to replicate this behaviour in OS X (and turn graphics switching off) you'd find the laptop would get equally hot and fans would ramp up to maximum speed just to try to keep things cool. If you hear your fans spinning at maximum then that is evidence that fan control is working.
It's a very unnatural behaviour and there are almost no situations where you ever need to use it. Microsoft should really make an effort to hide it and make it harder to access. High performance sounds nice and "Why wouldn't I want my laptop to run with high performance" is what most people think. Of course, Microsoft isn't very good at understanding what people think.
For most purposes "Balanced" is the Power management setting you'll want to use and this more closely reflects what Apple uses in OS X. Failing this, it could be that whatever software you're using is very badly coded for power management, but this is less likely and unlikely to cause the severe heating issue you described.
Finally, there's no need to regret your purchase. It's an amazing laptop and the best way to run Windows in my opinion. The only thing missing I can think of is switchable graphics driver support but this isn't anywhere near as severe a problem as what you've described.

Envy Beats 15-1055se - How to enable AHCI mode for SSD

How can i enable the AHCI mode for the envy 15-1055se. I tried to find this option in the bios, but its not there. I already installed an SSD and the OS (Windows 7 home Premium). Im using Samsung EVO 250gb.

That can be done by using Windows Regedit feature. It is imperative that you make a copy of the registry before you commit to the change.
Use regedit with extreme care. All changes that you make take place instantly. That is why it is critial to have made a copy .
What is the installed operating system?
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How to enable administrator account in windows 8

I need Administrator Account access to install SQL server 2005 in Windows 8 and I tried all Possible or given solution in PC but I'm not succeed to enable this account.. I tried lusrmgr.msc also but there is nothing option.
Mainly I couldn't find the option Local User and group management option in Windows 8..
and also i tried from cmd by net user administrator /active:Yes
but command displays access denied

Hi,
Please try this to enable CMD on logon screen:
http://www.askvg.com/how-to-launch-command-prompt-or-other-programs-using-ease-of-access-button-at-login-screen-in-windows-vista-and-7/
Then, try to enable built-in admin account.
net user administrator /active:Yes

How can I repair my Bootcamp Windows XP partition?

Hi! I've had Bootcamp for over a year, but last night, when I tired to open an application, Windows crashed giving me a blue screen telling me "IRQL_NOT_LESS_OR_EQUAL." I've had this problem sometimes before, but this time, whenever I try to boot from my Windows partition, it starts loading (showing the flag and the little blue bar), and, while still loading, the screen goes black and I have to choose a different configuration. I managed to boot in "Safe Mode with Command Prompt." As it's still loading in the aforementioned mode, it gives me a list of all (prsumably) the drivers on my system, and pauses on "myp.sys" for a few seconds (10-15), at which point it loads normally into safe mode. So I googled my case and it may be that there's a problem with Boot Camp's MBR, but since I'm not a particularly advanced user, I have no idea how to make sure that's the problem. I also tried booting from the Windows XP CD to get to the Recovery Console, but some of the commands (like "FIXMBR") were particularly menacing, so I did not attempt anything. I'm also trying to repair my partition with Disk Utility at the moment, but I suspect it won't do any good. Any ideas?

I re-installed XP over the existing XP, but the opening screen does not show any of my programs or data. I still have a bootcamp Icon on my desktop and all the programs and dats are there. How do I re-integrate the system, so I boot to a working Windows XP with my old programs and data?
Thanks for any input.
Steve Nellissen

How to enable serveroutput in OracleXE - windows 7 os

Hi ALL
I am new to oracle. I bought Hands on Oracle database 10g express edition for windows book .
I am trying to write simple pl/sql program to display a number
when i try to execute this line DBMS_OUTPUT.PUT_LINE(SOME VARIABLE);
I am getting error
After when i refereed the book it says " you will not see the out put of a call to DBMS_OUTPUT.PUT_LINE unless you enable the
SQL*PLUS enviroment settting serveroutput with a command such as SET SERVEROUTPUT ON .
please let me know how to to navigate to SQL*PLUS enviroment settting and also to set the serveroutput on .
I am having windows 7 OS
I have installed Oracle XE in c:\ drive
Thanks
Guna

You can check to see if SERVEROUTPUT is ON for your environment by typing the following at the SQL*Plus prompt
SQL > show serveroutput
serveroutput ON SIZE 1000000 FORMAT WRAPPEDIf it's OFF like shown below:
SQL > show serveroutput
serveroutput OFFThen all you have to do to enable it is:
SQL > set serveroutput onHope this helps!

How to enable "persistent mode" in Windows failover cluster manager 2012?

In Windows Server 2008 R2 there was a checkbox named "Enable persistent mode" on a General tab in the Properties of a cluster resource.
In Windows Server 2012 that seems to have disappeared.
My cluster resource is a "generic script" resource (not that it makes any difference).
How do I enable "persistent mode" for a cluster resource in Windows Server 2012?
Thanks

Hi Marcus Griley,
Enabled by default for VM groups Option is hidden from GUI in 2012, you can use the specify the preferred owner of group to realize the same function, positively not come online
on a node that is not a possible owner. If no possible owner nodes are up, then the group will still failover to a node that’s not a possible owner, but it will not come online.
Preferred Owners in a Cluster
http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx
Specify preferred owners of a group:
https://technet.microsoft.com/en-us/library/cc759663(v=ws.10).aspx
Set group FailOver policy:
https://technet.microsoft.com/en-us/library/cc786993(v=ws.10).aspx
Set group FailBack policy:
https://technet.microsoft.com/en-us/library/cc778570(v=ws.10).aspx- This will help the resources to fail back on the preferred owner.
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to enable iSight webcam on windows 7?

I bought an iMac about 10 months ago.
It runs a 2.93 GHz Intel Core i7
Upgraded to Lion last month.
I also have Parallels Desktop installed.
Question: how do I install the iSight webcam on windows 7?
It works fine on the mac side.
My startup disk has no drivers for windows, and nothing that looks like bootcamp anyway.
I do not know neither where to download bootcamp nor which correct version to download for this particular machine.

If Parallels support http://kb.parallels.com/en/112801 does not help you find what you need,
try searching in the dedicated Parallels forum http://forum.parallels.com/showthread.php?t=91968
or consider Ralph's comments here: http://discussions.apple.com/message/16708454#16708454

How to enable Gmail notifications in Windows 10 Notification?

I want to get GMail notifications natively in Windows 10 Notifications. How I can enable It?

Read The Friendly Manual (R.T.F.M.).
I suppose you are also a member of the Nebraska Women's League for Decency. They are the ones that screen request for personalized license plates and know
ALL the foul and dirty words and phrases. I have never understood how member of the Women's League for Decency would be so knowledgeable about foul and dirty words and phrases.
RTFM, Inc. Communications security Real-time communications Distributed systems

How to Enable ahci in bootcamp windows 7

Similar Messages

Maybe you are looking for