How to enable all fields in DTP Semantic Group....
Hi
In BI, for one of my Master Bearing Infoobjects DTP-> Semantic Group is enabled for all fields. But for 2nd master bearing infoobject, only its primary keys are enabled & non-primary keys r disabled in its semantic group. Even both structure have same DTP settings and both have data.
Could u pls. let me know why is it so & how can i enable all fields in semantic group.
Thanks...
Hi Harpal,
What are your target and source objects?
Take a look to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Choose This graphic is explained in the accompanying text Semantic Groups to specify
how you want to build the data packages that are read from the source (DataSource or
InfoProvider). To do this, define key fields. Data records that have the same key
are combined in a single data package.
This setting is only relevant for DataStore objects with data fields that are
overwritten. This setting also defines the key fields for the error stack.
By defining the key for the error stack, you ensure that the data can
be updated in the target in the correct order once the incorrect data
records have been corrected.
Regards, Federico
Similar Messages
-
How to enable all details on about this page link
Hi All experts,
Could any one help me out how to enable all details (like which view object, Application module and Controller associate with fields.) on the about this page link.
My problem is I am not able to see any details on about this page link wail clicking on this link due to they created a custom responsibility and they mapped the ceded menus and functions.
Thanks in advance
Best regards,
KsvThanks for your reply,
But we are not able to see any links/tabs/details also.
just we are able to see the page path only.
regards,
prasad -
How to make all fields mandatory in sales order T- code VA01 initial screen
Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar ReddyHi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad -
How to return all field names in a table
How do you write a report to return all field names in a table? I prefer the field names in a column.
Thanks
WayneHi,
In Oracle it is,
Select column_name from user_tab_cols where table_name = 'Table_Name';
Note: Table_Name should be in capital letters
In MS SQL Server it is,
SELECT Column_Name + ', '
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_NAME = 'Table_Name'
Hope this helps!
Thanks
-Azhar -
How to retrieve all fields from Entiy Bean
Is there a simpler way to retrieve all fields from the entity bean than calling each individual get method?
I need to retrieve the entire record not the contents of the entire table.
Though, I may eventually need to do that also.
I have 56 fields on this table. It does not make sense to code a get statement for every field.
If you can direct me to sample code that would be good.
Also, are there any good examples out there of how to create an entity bean or session bean using a local interface?
Thanks,
JimI think you are confusing an EJB with a DAO.
If you want to access the database why not just use JDBC? -
How to enable "All Files" in SharePoint Designer 2010
Hi everyone,
How can I enable "All Files" in my sharepoint designer.In home laptop I see it,but in production environment where I work,opening SharePoint Designer I can not see "All Files" button.I am with admin account and everithing is ticked in the central administration
Designer options.
Thanks in advance.Hi ,
I noticed that you said you can see the ‘All files’ folder in home laptop ,but it is missing when open in the production environment .Did this happen to
all the sites or the site in the specific web application ?Have you extend the web application into an Internet zone?
Actually you should change the SharePoint designer settings in both Central Administration and Site collection settings .Perform an IIS reset after change
the settings and reopen the site in SharePoint designer.
For more information about SharePoint designer settings ,please refer to this site :
Locking Down SharePoint Designer 2010 :
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Thanks,
Entan Ming -
How to enable all options under "Text Edits"
Hi,
How to activate all options under "text edits" see screenshot.Hi,
I discovered, these options are not enabled for scanned PDF files.
Thank You -
How to return all fields when updating?
When I update a lead, it only returns fields that are modified but not all fields in the XML.
I noticed the LeadID and LeadFullname values are still being returned when updating which is good.
How can I make it so it will return ALL fields that have values and not just the modified ones when updating?
ThanksI have to query it after getting it back from the queue.
-
In background how to display all fields using reuse_alv_list_display
Hi all,
I have output table with 100 fields,when i ran in background its giving the output with out alignments,how to make the whole record in a single line,presently it displays each record in a 3 rows,please help me
thanks
SrimanHi,
In fore ground it displaying all columns but when i ran in background its giving all fields but the each record contains rows,i need to make it as single line
the code i have written for this is.
for background is there any parameter to add for this code.help me
ls_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = repid
it_fieldcat = it_fieldcat
it_events = events_b
is_layout = ls_layout
it_events = it_events
is_print = ls_print
i_save = 'X'
TABLES
t_outtab = t_ce1jab1.
thanks
sriman -
How to enable certain fields in billing document?
Hi gurus!
I need your help with this, we recently upgraded our system from version 4.6C to ERP 2005. We have some users in Sales who are in charge of the billing process, in version 4.6C they were able to change some fields of the billing header such as:
- Currency
- Payment terms
- Incoterms
In the new version these fields appear as "disabled" (users cannot change anymore what was copied from the Clients Master Data).
I know there's some configuration in which info is copied from the sales order to the billing document (Copy Control). I already checked that and I'm not able to find where I can change something to "enable" these fields so users can define whatever they need.
I also tried to see in SE80 if the fields that are part of that Dynpro have some other properties to enable them but was unable to change something.
I also checked transactions OVA2 and VUA2 but didn't find somenthing that could help me out with this. Finally I checked different user exits in the previous version but it seems that when this was originally configured that was not the solution.
There's also something else going on with the header because in the previous version users had the chance to type different texts in the Text Header tab but now everything is "disabled".
Is there a transaction or something that you know so I can enable those fields?
Thanks in advance.Not sure what the requirement is as ideally, you are not suppose to change the partner function manually during shipment. However, go to VOPA, place your mouse on Transport and click on Partner Procedures. Double click on Procedure and see whether Forwarding Agent is set to Not changeable . If so, untick that and save. Now retry the process.
thanks
G. Lakshmipathi -
How to fetch all fields with RFC_READ_TABLE ?
I can use RFC_READ_TABLE to fetch specified fields with the TABLE parameter "FIELDS". If I want to fetch all fields of the table, I must specified each field name. However, I can not use "*" in FIELDS, and I can not left the table empty (Error will be generated). Is there other method to fetch all fields ?
language: VB.NET
tblT = New TAB512Table
tblTField = New RFC_DB_FLDTable
tblTOption = New RFC_DB_OPTTable
Dim stuTFieldRow As New RFC_DB_FLD
Dim stuTOptionRow As New RFC_DB_OPT
Sapproxy.Rfc_Read_Table("", "", strTN, 0, 0, tblT, tblTField, tblTOption)Hi:
Do like this
CALL FUNCTION 'RFC_READ_TABLE'
EXPORTING
query_table = Table
delimiter = ''
no_data = ''
rowskips = 0
rowcount = 0
TABLES
options = i_options
fields = i_fields
data = t_data.
Regards
Shashi -
How to enable pernr field in miro
Hello,
while creating invoice in miro, pernr(emp no.) field is in display mode but i want the field in changeble mode.
for the above requirement I have enabled pernr field in miro by going to transaction olmrlist and then entering the below
Transaction MIRO
Screen variant 7_6310
Program SAPLMR1M
Screen 6310
and by checking the attributes of field Personnel no .
while doing so the quantity field which was intially enabled got disabled .
I want the quantity field to be enabled.
I am working in sap ecc600.
Kindly help me .
Regards,
Rachel
Edited by: Rachel on May 7, 2008 11:24 AMI got the answer for my Q.
Purchase order is a service PO and in case of service PO, you can
enter the quantity during MIRO only if GR-based IV and SRV-based IV
indicators ( at invoice tab of PO) are ticked. Since PO present in system these indicators not ticked so quantity field is set as displayed.
Regards,
Rachel -
How to clear all fields on the page by using javascript ?
Hello,
has anyone an example of javascript function that clears all fields on the page?
ThanksHi Edward,
You may want to have a look here http://textsnippets.com/posts/show/215
Or try this (source from http://www.mindpalette.com/tutorials/clear_defaults/index.php):
function MPClearAll() {
with (document.forms[thisForm]) {
for (var n=0; n<defaultVals.length; n++) {
var thisField = defaultVals[n][0];
var thisDefault = defaultVals[n][1];
if (elements[thisField].value == thisDefault)
elements[thisField].value = '';
}}}Hope that helps,
Dimitri -
How to retrieve all users in a specific group
Hi,
I am using SunOne directory server. Can someone please post a sample code that illustrates how to fetch all the list of users in a particular group.
1) Let's say I want to find all the users in a group called "marketing". The root context is dc=mycompany,dc=com This group can be anywhere below this root context. Only information I am told is the name of the group - "marketing". How will I get all the users in this group?
2) For each user that is retrieved from the group marketing, how will I find out the user's DN?
Thanks for the help,
- SatishDo it like this...
String searchBase = "ou=marketing";
StringBuffer filter = new StringBuffer();
filter.append("(|");
if (organizationName != null && !organizationName.trim().equals("")) {
filter.append("(");
filter.append(ou);
filter.append("=");
filter.append("marketing");
filter.append(")");
SearchControls constraints = new SearchControls();
constraints.setSearchScope(SearchControls.SUBTREE_SCOPE);
constraints.setCountLimit(200); // How many users should be found
constraints.setTimeLimit(100000); // how much time should this search wait
// Get a initial context and set it to the ctx object
ctx.search(searchBase, filter.toString(), constraints); -
How to compare two fields from two different groups
My RTF template is like this.
GROUP A
Field 1 Field 2 Field 3 (Display in table)
GROUP B
**Condition
Display Fields from B
end GROUP B
end GROUP A
But I need the following condition to be added at the place (** Condition)
IF A.Field1 = B.Field1
Display fields from B
END IF
end Group B
end Group A
Please help, if anyone has come across such a situation.
Thanks,
AnandYou can use variables to store the A.field1 value and then compare it against B.Field1.
Take a look at this post for an example: https://blogs.oracle.com/xmlpublisher/entry/formatting_concatenated_dataso
Thanks,
Bipuser
Maybe you are looking for
-
Tcode:File ,Tcode:sf01 understanding
pls help me in understanding these tcode to create logical path,pls provide me the step by step to create a logical path
-
Looking for a laser multi-function unit with duplexing
I had bought a Canon MF4350d for my MacPro with Snow Leopard but having trouble scanning and would like to purchase an alternate device. The features I'm looking for are scanner with sheet feeder, duplex (2-sided) laser printing, fax, and copier (als
-
Apogee Mic, Ipod Touch 5, Skype problem
I have a apogee mic, connected with the lightning cable to a Ipod Touch 5. It works on Garage band, but i can't make it to work on skype. Thank you in advance!
-
Cisco 1602i + Authenticating users via RADIUS?
Hello, Our company recently purchased a Cisco 1602i standalone WAP to replace the WAP4410Ns that we were having issues with. I am now attempting to configure the RADIUS authentication, as we have a User network and a Guest connection.
-
I need a little help with a problem regarding Fast CGI. I'm not sure if this the right forum but I have to start somewhere :) I received the following problem description from a developer. If, in fact, this is a Solaris problem, we'd have to move the