How to enable and install Enterprise Manager on Oracle E-Business Suite R12

how to install Oracle Enterprise Manager. Were using single node Oracle E-Business Suite R12 (12.0.6) and our dbase version is 10.2.0, running under RedHat Linux 4 x64.
I am following the below note
How to Enable Enterprise Manager on the Oracle E-Business Suite Release 12 (Doc ID 458533.1)
These patches are not available (6272715 and 6141000)
how to proceed

I think if you are on 12.0.6 you do not need to have those patches applied -- Please query AD_BUGS table to verify if you already have those patches applied or not.
If you cannot download those patches and you still think you need it, please log a SR and Oracle support should help.
Thanks,
Hussein

Similar Messages

After Installing Oracle E-Business Suite R12.1.1 on Windows

After I Install Oracle E-Business Suite R12.1.1 on Windows
how can i shutdown the application and the database correctly
i used the script in
oracle\PROD\inst\apps\PROD_TEST\admin\scripts\adstpall.cmd apps/apps to stop the application
and the script
oracle\PROD\db\tech_st\11.1.0\appsutil\scripts\PROD_TEST\addbctl.cmd stop immediate to stop the database
and the script
oracle\PROD\inst\apps\PROD_TEST\admin\scripts\adstrtal.cmd apps/apps to start the application
and the script
oracle\PROD\db\tech_st\11.1.0\appsutil\scripts\PROD_TEST\addlnctl.cmd stop prod to start the database
but it gives me echo off and didn't work at all
can anyone help me plz it's very important
Ahmed

Hi,
I got the echo off when i trying to start the database and the application using the scripts, Please post the message you get here when your run the scripts (along with the scripts).
i tried to start them in from (Control Panel > Administrative Tools > Services), but they didn't startDid not start what? What is the error? Check the event viewer for details.
please can you tell me the excat steps to start the databse, database listner and the application ?The steps are just like what you have mentioned in your post (I have also mentioned it in my previous reply).
Regards,
Hussein

Is It Necessary to Install Visual C++ before Oracle E-business suite Instal

Hi Gurus/Experts
I have Downloaded all 45 Files. NoW
Is it Necessary to Install Visual C++ before Oracle E-business Suite.
And Also How much Space ORacle E-business suite will take After Installation.....I am Having 100 GB free space

Hi,
I have Downloaded all 45 Files. NoW
Is it Necessary to Install Visual C++ before Oracle E-business Suite.Yes, it is a pre-req. and it is required for the installation and for relinking the executable files.
Note: 761567.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server
And Also How much Space ORacle E-business suite will take After Installation.....I am Having 100 GB free spacePlease see the installation manual, it is mentioned for fresh database installation and for vision demo database installation.
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
Thanks,
Hussein

How to disable direct forms access in Oracle E-Business Suite R12.1.3

@Hussein Sawwan
Hi Hussein,
I don't know if I have well formulated the title of this discussion. But I will try to explain.
I have a problem on my TEST Oracle E-Business Suite R12.1.3 instance. After login into the homepage, some forms automatically start opening. I don't know why, last week the system was working fine. This TEST instance is used by users to train themselves.
How can I make sure that the forms are opening only when someone clicks on them? I don't want the forms to be popping out automatically after someone logs in.
Thanks in advance.
Clamarion.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Installing Oracle E Business Suite R12 on Windows 7

Hi All,
I want to install Oracle E Business Suite R12 on my laptop with the following configuration. Please review and check if it's supported or not.
*Operating System: Windows 7 Home Basic
Processor: Intel(R) Core 2 Duo CPU T5870 @2.00GHz 2.00GHz
Installed memory(RAM) : 3.00 GB
System Type: 32-bit Operating System*
As I don't have sufficient free hard disk space, I plan to use an external hard drive. However, I can't increase the RAM as my laptop is under warranty.
If above configuration is not suitable, please suggest alternatives.
Regards,
KK

Hi,
*Operating System: Windows 7 Home BasicWindows 7 is not supported as a database/application tier node, so you need to have a supported/tested OS (Windows 2003, XP).
Processor: Intel(R) Core 2 Duo CPU T5870 @2.00GHz 2.00GHz
Installed memory(RAM) : 3.00 GB
System Type: 32-bit Operating System*
As I don't have sufficient free hard disk space, I plan to use an external hard drive. However, I can't increase the RAM as my laptop is under warranty.3 GB RAM should be OK (I would recommend having 4 GB at least -- If possible), and you can use an external disk drive.
If above configuration is not suitable, please suggest alternatives.For the OS, install a VM with one of the OS mentioned above.
Thanks,
Hussein

Oracle E-Business Suite R12 Install on Windows 2003 - FRM-92101

I have completed the install and can log into the application, however, when I try to access a forms I get an error FRM-92101.
FRM-92101: There was a failure in the Forms Server during startup.
This could happen due to invalid configuration.
Please look into the web-server log file for details.
The symptoms see to be the same as in Metalink2 Doc ID Link: [429627.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:1491198142809682374::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,429627.1,1,1,1,helvetica]
That Doc ID suggests running "make -f ins_forms.mk install", however, I am unable to get this to work. Is anyone able to help.

The error you get online is
FRM-92101: There was a failure in the Forms Server during startup.
This could happen due to invalid configuration.
Please look into the web-server log file for details.
The file $INST_TOP/logs/ora/10.1.3/j2ee/forms/forms_default_group_1/application.log contains
09/01/10 17:19:01.812 10.1.3.0.0 Started
09/01/10 17:19:43.453 formsweb: FormsServlet init():
configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/01/10 17:19:43.515 formsweb: 10.1.3.0.0 Started
09/01/10 17:21:15.46 formsweb: 10.1.3.0.0 Stopped
09/01/10 17:21:38.484 10.1.3.0.0 Started
09/01/10 17:21:40.515 formsweb: FormsServlet init():
configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/01/10 17:21:40.515 formsweb: 10.1.3.0.0 Started
09/01/10 17:41:17.140 formsweb: 10.1.3.0.0 Stopped
09/01/10 17:48:33.484 10.1.3.0.0 Started
09/01/10 17:48:36.171 formsweb: FormsServlet init():
configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/01/10 17:48:36.187 formsweb: 10.1.3.0.0 Started
09/01/10 17:59:34.484 formsweb: ListenerServlet init()
09/01/10 18:03:09.984 formsweb: Forms session <1> failed during startup: no response from runtime process
09/01/10 18:03:09.984 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/01/12 11:33:51.531 formsweb: 10.1.3.0.0 Stopped
The file $INST_TOP/logs/ora/10.1.3/Apache/?????? contains
[Sat Jan 10 17:18:42 2009] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting
[Sat Jan 10 17:22:52 2009] [error] [client 192.168.1.40] [ecid: 1231608172:192.168.1.40:1264:3120:4,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/oa_html/jtfTestCookie.jsp
[Sat Jan 10 17:23:07 2009] [error] [client 192.168.1.40] [ecid: 1231608187:192.168.1.40:1264:1980:1,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/oa_html/jtfTestCookie.jsp
[Sat Jan 10 17:41:00 2009] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting
[Sat Jan 10 17:54:47 2009] [error] [client 192.168.1.40] [ecid: 1231610087:192.168.1.40:3956:2720:2,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/favicon.ico
[Sat Jan 10 17:59:33 2009] [error] [client 192.168.1.40] [ecid: 1231610373:192.168.1.40:3956:2848:10,0] Directory index forbidden by rule: e:/oracle/vis/apps/apps_st/comn/java/classes/
[Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:17,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_GB.class
[Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:18,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_GB.properties
[Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:19,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_GB.class
[Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:20,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_GB.properties

Clone RAC enabled Oracle E-business environment R12

Hi,
I want to clone RAC enabled E-business R12 environemnt to new server.
Oracle E-business suite R12 is running on 11g R2 RAC and i like to clone it to new server. Please guide me how to finish this task.
Thanks

The following two notes would give you step by step instructions.
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=559518.1
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=406982.1
Go through them and let me know any further questions ;)
HTH,
Raj Mareddi
http://www.freeoraclehelp.com

Tar: Unexpected EOF in archive for Oracle-E-Business-Suite-12.2.3-VISION-INSTALL

Hi All,
System = Ubuntu 14.04 LTS (64 bit)
I downloaded Oracle EBS Vision instance from Oracle eDelivery.
File Name = Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00
File Type = Archive
There are 14 others files like the same and they have been successfully extracted. This is the first file out of the 15 total files.
I am unable to extract the above file.
Steps Performed
1. Initially, I tried to extract directly. I got the error
Could not open "Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00"
Archive Type not supported
2. Then I renamed the file to "Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00.tar" and tried to do the following
$ tar xvf Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00.tar
Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ovf
Oracle-E-Business-Suite-12.2.3-VISION-INSTALL-disk1.vmdk
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
Now the above two downloaded files Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ovf and Oracle-E-Business-Suite-12.2.3-VISION-INSTALL-disk1.vmdk are of unknown file type.
Ideally I should have got a file = Oracle-E-Business-Suite-12.2.3-VISION-INSTALL.ova.00 (File Type = Program) like all other 14 files and as per the installation steps that I see in the videos for the installation.
Can anyone help me on this?
Thanks,
Niladri

System = Ubuntu 14.04 LTS (64 bit)
This is not a certified OS, please see (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x86-64 (Doc ID 1330701.1)) for the list of supported Linux OS.
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
This indicates that the files are corrupted and you will need to re-download the files again.
Thanks,
Hussein

How to download language pack for Oracle E-Business Suite 12.1

Hi,
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?
Please guide.
Thanks,
Rohit

Hi rohit;
I want to download Portuguese language pack for Oracle E-Business Suite 12.1.
However on Oracle E-Delivery, I could not find any language pack for downloading (as it was available for OEBS 11i)
Is there any change in installing language pack on Oracle E-Business Suite 12/12.1 as compared to 11i.
Should i download complete Oracle E-Buisiness Suite installer by selecting the Portuguese language on first page of Oracle E-Delivery?What is your OS? I checked for linux, In e-delivery if you choose :
Oracle E-Business Suite Release 12.1.1 (with NLS Supplement) Media Pack for Linux x86
You will see:
Oracle E-Business Suite NLS Release 12.1.1 - Portuguese V16178-01 681M
Its avaliable there
Hope it helps
Regard
Helios

Need to configure Enterprise Manager after Oracle 10g installed on Windows7

I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AM

889075 wrote:
I have installed Oracle 10g on Windows7 machine. At end of installation a error msg pop up saying "Enterprise Manager is not installed properly. You can install it using emca.bat file later".
I then run emca.bat file. But EM was not installed yet.
Any solution to install Enterprise Manager would be great.
Thanks.
Edited by: 889075 on Mar 23, 2013 7:34 AM
Edited by: 889075 on Mar 23, 2013 7:35 AMBTW, V10 Oracle is unsupported
which version of Oracle to 4 decimal places?
which edition of Windows 7?
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

Installing Enterprise Manager 10g Grid Control Using an Existing Database

I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
Thank you.

I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

How to downlaod and Install Elements 12?

How to downlaod and Install Elements 12?

if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
and activate with your serial number.
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

How to download and install ringback tones on my 5s

how to download and install ring back tones on my 5s

I would love for you to have ring back tones on Iphone 5s! Here is where you can purchase and manage your ring back tones: http://vz.to/15Jto4u
AmberF_VZW
Follow us on Twitter @VZWSupport

Strange problem with 10G using client installed enterprise manager console

I have successfully installed 10G on our SUSE linux 9.0 server, I have created 6 databases (standard edition of the database) and verified their parameter files, control files, and database files are in different locations --- all done at the server console. I created my DBA account on all 6 databases and logged into each one to verify their function.
I returned to my PC where I have installed the 10G client and where I have used the 8 and 9 enterprise manager console to manage my databases. I got the TNSNAMES file in order for the new databases. I logged into the first database and tested my workstation connectivity successfully , I logged into the second database and it said my password was incorrect. I ended up signing in on the second database with my first databases account password. (it then worked). I got fed up hopping around with the mystery with the password being stored somewhere in the enterprise manager java ? and logged in as system and changed all of my passwords. I then went up to the console and found that the only database that they changed on was the first one.
I returned to my workstation and started creating the data files and users and roles in the first database. I now on either workstation in my office, when logging in as ANY of the six database DBA accounts, can see all the objects I created in the first database.
I went to the server console and logged in and verified that the objects only exist in the first database. For some reason the enerprise manager console is really a problem. I have windows XP. Our database is on 10G but we are not taking advantage of grid control due to budget reasons (one server only).
I have heard there is a url based web management console at: http://serverip:5500/em, but it is not working currently in our environment and it will be up to our sys. engineers to release / open up that port through our DMZ. Ordinarily would this allow the kind of control that the old enterprise manager console would?
Is my installing the grid conrol product going to be "overkill" and not useful for me or should I install it?
Is there an alternative 10G version of the enterprise manager console for simpler environments like mine?
Is there a good explanation why my workstations are presenting "false" cached information above what is really in the database for objects unique to each database - ie: why are my #1 database objects showing up in EMC as objects in all databases and why is EMC managing/storing my passwords.?
I just need to get the best choice to manage my environment.
I know I have asked a lot of questions and I would appreciate any insight from someone who has encountered this before.

fixed
- the alias in the TNSNAMES was correct but the actual database "service_name" was the first db - -- a long project / late night oversight. I also went into the sysman\ifiles\ and corrected the entry for the database there too where it had registered the settings for the wrong database.

How to enable and install Enterprise Manager on Oracle E-Business Suite R12

Similar Messages

Maybe you are looking for