How to enable Audio Track for recording podcast

I'm trying to use Garageband to create podcast in iLife '06. When I select female voice and the red record button, I get this message "No Audio Track is enabled for recording". Adding new track from the Tracks menu does not help. Can anyone help please?

Um, er, that's a Windows app. The best way to record Skype on a Mac is Ecamm's Call Recorder. Just install and you get a record button in Skype!

Similar Messages

  • Why can't I enable an audio track for recording? (It won't let me)

    I want to record VO but PP won't let me...
    On Mac OS X 10.10 Yosemite in System Preferences:
    • Sound Input is set to C-Media USB Headphone Set (an Alesis usb mic...works fine for VO in Final Cut Pro 7)
    • Output is set to Headphone port
    In Premiere Pro CC Audio Hardware Preferences:
    • ASIO Hardware is set to "System Default Input/Output"
    • I have also tried "C-Media USB Headphone Set but this, too, doesn't work
    • With "System Default I/O" selected, Output Mapping is set to "Adobe Desktop Audio" (only choice), and shows:
         • "Built-in Output: Headphones 1
         • "Built-in Output: Headphones 2
         • "C-Media USB Headphone Set: Front Left
         • "C-Media USB Headphone Set: Front Right
    all four of these have a couple of square icons to the right.
    In order to record VO, I first need to "enable track for recording" in the Audio Track Mixer. There are no in or out points set in my timeline and the tracks are not locked or solo'd or anything. So why can't I select the audio track I want to use to record VO? I click it but there is no response. I just want to know why this software is not doing what it's designed to do.

    is I learn still around -? That was VERY HANDY!

  • Engaging audio tracks for recording

    I'm using multiple instruments to record drums, but whenever I engage multiple audio tracks it doesn't work, example. I'll engage tracks 1 and 2, and then when I go to engage audio track 3 audio track 1 disengages without me doing anything. This will happen in pairs of two, allowing me to only be able to record to audio tracks at a time. Why is this happening and how can I fix it?
    G5 2GHZ   Mac OS X (10.2.x)   2.5 GB Ram

    following jords reply that happens because that's your currently selected inputs,
    if your audio interface allows you to have more than 2 inputs if you select 3 and 4,5-6 etc
    on the following audio tracks channel strips you will be able to record on more than 2 mono channels and so on.

  • Is it possible to lock an audio track in "record enabled" mode?

    Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
    I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
    Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
    I'm forced to scroll miles up the arrange window, to find
    the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
    Only then can i record the midi AND vocals.
    What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
    Cubase VST 5.1, OS 9)
    Is there a way to record enable an audio track, so that,
    until I specifically disable the record function, it's
    ALWAYS ready to record the second I hit the record button?
    Even after I've been hitting the down arrow to audition
    various midi channels?
    MacPro 3ghz, 8 gig RAM, 3 raptor drives   Mac OS X (10.4.10)   Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

    I tried to build screensets like you suggested. If I could
    get this to work, I think it would be a great solution, but
    I'm having serious problems.
    I opened a separate mixer, with just the single vocal/audio
    track showing.
    Then I opened the main mixer, which has all the faders.
    If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
    The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
    Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
    track.
    A big problem is, that when i click to record enable the
    vocal track, the arrange window jumps all the way up to the
    top, where the audio track is. THen i'm forced to travel
    down, to re-find the midi track.
    You mentioned in your post that the mixer needs to be
    "unlinked". HOw is this done? Will it be possible for
    me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

  • Player Error: "You cannot record without enabling at least one track for recording"

    So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

    This is how I have just made a recording:
    Select track to record (1), Select record (2) then press play to record.
    Use the in-out markers in the program monitor to select the area to record.

  • How do I enable a track to record in Premiere Pro CS4?

    I'm on a macbook. I have a SM57 mic plugged in via an XLR to USB cable. I have tested this mic via garage band, and it works and records fine.
    In Premiere Pro preferences I have chosen C-media USB Audio Device.
    In mac's Audio MIDI setup, I have chosen C-media USB Audio Device as Default Input.
    In Premiere Pro, I have clicked on Audio 1 to highlight that's the track I want to record to.
    Yet when I click on the Mic picture in the Audio Mixer to enable track for recording, it does nothing, no drop down box, no indication that I clicked it (other than highlighting itself in yellow for a brief moment).
    Then I click the record button, it starts flashing, waiting for me to click play.
    Then I click play and a message comes up "You cannont record without enabling at least one track for recording"
    Where am I going wrong?
    Any help is much appreciated.

    ASIO4All - that's for Windows only, right? I'm on a mac.
    I've been looking into using Soundbooth, which does recognise my USB connection.
    Any tips for workflow between Premiere Pro and Soundbooth?
    At the moment it looks like I'll have to edit my video footage first (it has no audio track),
    then having watched the rough cut, record my voiceover in Soundbooth, adjust  levels etc.
    then import those voiceover files into Premiere Pro and edit them in timeline to match my video.
    Not exactly ideal.
    Is there any way of watching  the rough cut while recording the voiceover?
    Or am I better off recording the voiceover in Premiere Pro with my rubbish Line in connection, then taking it into Soundbooth to boost/clean up?
    Thanks

  • Can't Arm Track for Recording

    I can't Arm any track for recording. I've closed the program, rebooted, etc. with no luck. When I first open Audition, with no session loaded, I can Arm a track. But when I load my session I can't Arm any track. I've checked Audio Hardware Setup and all seems OK. Anyone know what might be happening? Thanks.

    I found the problem. Each track had the 'Input' button (right below the volume and pan buttons) set to none. How this happened I'm not sure. Probably when I opened another program that took over ASIO and changed AA3.
    I found the answer at http://forums.digitalmedianet.com/cgi-bin/readwholethread.fcgi?forum=adobe_audition&post= 060922041404.htm&toppostid=425
    They were discussing another problem but was able to get my answer from the topic they were discussing.

  • How to replace audio track in mpg file (3,4 Gb) by mp3 fies?

    How to replace audio track in mpg file (3,4 Gb) by mp3 fies? Without loosing video quality?

    I've never used muxers under Linux, but you can try mpegdemux.
    Take a look at Elecard Xmuxer Pro, for example – but that costs $$$. Look here and you may find a good, free Windows-based tool.

  • How to enable remote debugging for a session other than the current one

    Hi all,
    I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
    More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
    The docs indicate that I should be able to do so:
    dbms_debug_jdwp.connect_tcp(
    host IN VARCHAR2,
    port IN VARCHAR2,
    session_id IN PLS_INTEGER := NULL,
    session_serial IN PLS_INTEGER := NULL,
    debug_role IN VARCHAR2 := NULL,
    debug_role_pwd IN VARCHAR2 := NULL,
    option_flags IN PLS_INTEGER := 0,
    extensions_cmd_set IN PLS_INTEGER := 128);
    But when I try (even as sys), I get the following:
    exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
    ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
    ORA-06512: at line 1
    00022. 00000 - "invalid session ID; access denied"
    *Cause:    Either the session specified does not exist or the caller
    does not have the privilege to access it.
    *Action:   Specify a valid session ID that you have privilege to access,
    that is either you own it or you have the CHANGE_USER privilege.
    I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
    Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

    Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
    I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
    Regards,
    K.

  • How to enable push mail for gmail in iphone 6 plus

    how to enable push mail for gmail in iphone 6 plus

    Tommacgr wrote:
    You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
    You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

  • How to enable cascade view for sites(iStore) in 11i?

    How to enable cascade view for sites in 11i?

    Hi,
    For this issue, I'm trying to involve someone familiar with this topic to further look at it.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
    for TechNet Subscriber Support, contact [email protected]
    Wendy Li
    TechNet Community Support

  • How to setup a track for production support in NWDI ??

    Hi,
    *I have a requirement:*
    Suppose I am working on a product development, i have finished phase -1 of the development, I moved the changes to QA system and than I moved it to the production.
    Than I started working on Phase-2 of that product development, and I have done lots of additional changes to the code which was in Phase-1, suddenly I came to know that  there are some bugs in the production, that is bugs in the phase-1 code which is in production now.
    Since i can not use current code which i have in development track, since I have done lots of changes in that , Now I want to know what is the best possible way to fix that bug, since I have to fix that bug in a day or 2 max, I can wait for the phase-2 developement but I can not wait much to fix the bug. In have to fix bugs immediately.
    Please let me know how to do this in the best possible way. How to maintain the tracks for this.
    regards
    vicky

    Hi Vikas,
    there is a very nice blog entry on SDN from Marion Schlotte.
    I think this will give you one or antoher clue on how one can do this.
    /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
    Hope this helps
    Jan

  • How do i find out how many subscribers i have for my podcast please?

    How do i find out how many subscribers i have for my podcast?
    Thanks in advance
    Brinsley
    Leeds - U.K

    hey thank you very much for your help!!
    At first I didn't get it but now I do
    wo00 hoo0!
    am so happy right now!!!
    n_n

  • Nokia n8 How to switch audio tracks in video playe...

    How to switch audio tracks in video player? and How can I connect an external audio track playback video?

    Re: Nokia N8 how to reset to factory settings [ New ]
    ‎2013-01-16 23:06
    Hiiii i hace the same problem i dont have pasaron to hard reset my Nokia 8 and i have a big problem, i cant maje calles , or go to the Home menú, or use wifi, dial aytihing I been having that message saying that there no memory and u have to delete some data, since then just menu screen it works but nothing else please help
    HI everyone! I also have the same problem as per above. Please help! Thank you!

  • Premiere Elements 13 (not Pro), recorded a video with mono mic input (left channel only), need to create 2-channel (left and right) audio track for finished product. Help?

    The question says it all. I have been all over the tutorials as well as the menus inside Premiere 13 and cannot find how to edit the audio track beyond basic balance, volume, etc.
    I can see the Audio 1 track, shows audio in left channel only, but it will not respond to attempts to select, cut/copy, paste, etc.
    Basically I just want to turn one-channel audio into two-channel audio.

    25424...
    Sure you do not want to give the Fill Left and Fill Right another try?
    According to the Adobe document Adobe Premiere Elements Help | Effects reference
    Fill Left, Fill Right
    The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information. The Fill Right effect duplicates the right channel information and places it in the left channel, discarding the existing left channel information. For example, you might use this effect on footage shot with a monaural microphone plugged into only one channel of a camcorder, extending the voice of a speaker from one channel to both.
    From what you wrote, your Premiere Pro video seems to be saying the same.
    If that Premiere Elements Fill Left or Fill Right is no go, you might want to explore what you can do in this regard using the free audio editor Audacity.
    Audacity: Free Audio Editor and Recorder
    And, then import the Audacity edited audio back into Premiere Elements project as source media.
    Is the speaker system OK?
    We will be watching for your results.
    Thanks for the follow up.
    ATR

Maybe you are looking for