How to enable channels WIFI 13 & 14 on E71-2

Hi,
I have a Rogers E71-2 mobile and I am currently travelling in Australia - I can't connect to the wireless networks where as they are using channels 12 & 13.
 Can I enable these on my North American E71-2?
Thanks!

Hit the F7 key (the one with a white aircraft on it...). This is a kind of turn on/off button for the wireless inteface.

Similar Messages

  • How to enable Channel 13 on WET54g

    I am using it in Europe and need to enable channel 13 so I can connect to a network on this channel.  I vaguely remember being told this was done by accessing a hidden setup page.  Can anyone tell me how to enable channel 13 on a WET54g V3.1?

    perita wrote:
    Thanks for your reply.
    >> Generally, devices bought in the U.S. can only be used in the U.S.
    This seems to me like poor and outdated policy. It reminds of times when you could not take a laptop to Europe because the power supply was only for 110 V.  Most manufacturers have moved to simplifying things for the customer and for themselves by making models more universal. 
    >> Flashing other firmware may brick the device. You can never rule that out.
    >> Flashing European firmware should not cause problems.
    >> Possibly it won't accept it but usually hardware versions between countries are identical.
    You say it should "not cause problems" but "may brick the device". I would consider a bricking the device to be a "problem".  I guess I can interpret it to mean that damage is unlikely but possible.  It gives me pause as I do not want to risk bricking it.
    The device label says it is WET54g V 3.1  At the US site http://homesupport.cisco.com/en-us/support/bridges/WET54G the choice for hardware version only goes up to V 3.0. Puzzling.
    At the European site http://homesupport.cisco.com/en-eu/support/bridges/WET54G/download I found support for version 3.1. Interesting and puzzling since my 3.1 is American.
    There, in the EU site, I found a file named WET54Gv3_1_v2d16.zip which contains two files:
    - wet54gv3_v2d16_us_20091027.img 
    - wet54gv3_v2d16_ce_20091027.img
    There is no explanation in the release notes of which one to use. The names differ only in two characters: us/ce.  I would assume "us" is for USA but what would "ce" be? I was expecting something like "uk" or "eu".  I am guessing the ce version is for Europe but I want to be sure before I start messing.  I have never flashed anything and I have no idea of the degree of risk involved. 
    You can reload it with this firmware wet54gv3_v2d16_ce_20091027.img.

  • How to enable WiFi transfer from Canon Legria HF M52 to iMac

    My iMac is a late 2012 model with Mountain Lion (v. 10.8.3).
    Recently I bought a Canon Legria HF M52 camcorder which is WiFi enabled, and is capable of transferring videos (AVCHD/MP4) wireless. The camera package included software for WiFi transfer on Windows PC, but not for Mac. However, still, according to the instruction manual, it should be possible to transfer files wireless to Mac using the Mac as a FTP server. Though, following the instruction manual, I`m still not being able to transfer files from my camera to my Mac.
    1. I know for a fact that the camera is correctly connected to the WiFi network, as I`ve managed to transfer files onto a friend´s Windows PC.
    2. Video files are easily transferred to Mac using the USB cable (but the CABLE is what I want to avoid), both AVCHD/MP4.
    3. Since Mountain Lion no longer has the option to enable/activate FTP server under "System Preferences/Sharing", I have enabled FTP via "Terminal" as described in this link; http://support.apple.com/kb/ht4704.
    4. Camera setup:
         - Use iMac IP address as "FTP server", 192.xxx.x.x (dynamic IP, so it is changed in camera setup if IP address is changed upon iMac reboot).
         - Port 21 (as dictated by the camera`s instruction manual).
         - Username / password as for the iMac admin account.
         - Destination folder; /User/Movies
    5. I have verified connectivity from MBA to iMac connecting via IP address / username and password.
    Still, when I try to transfer files from the camera, I get an error message while attempting to connect to the iMac; "An error occured during FTP communication. File transfer was not completed". Have made several attempts to reboot both iMac and camera.
    Any tips on how to enable my iMac to receive video files wireless?

    I guess those programs are intented for outgoing connections, not incoming connections?
    Well, anyways, I managed to solve the problem. Just summing up in case others meet the same problem:
    - Went to Apple Store and bought/installed "OS X Server".
    - Followed the install wizard for the OS X Server.
    - Under "FTP" in OS X Server, turned "On".
    - Under sys prefs/sharing; make sure "Sharing" is activated (which already had been done in my case).
    - Add folder, e.g. "Movies", and enable "read/write" for "everybody" (already done in my case).
    - Back to the OS X Server; changed share to "Movies".
    (you can change share options in OS X Server as well, the same way as under sys prefs.).
    - Now over to the Canon camcorder;
         - Use the IP address for the Mac as the FTP server. Port 21.
         - Set up username/password as for the Mac admin account (not sure if required though).
         - Target folder just set to "/" (files transferred directly to "Movies").
    With this setup, both AVCHD/MP4 movies were transferred easily to my mac.

  • How to enable wifi in G50-70 on Ubuntu 14.04

    Hi,
    I dont see any key to enable wifi in my laptop.
    Please help me to enable it.
    I am using Ubuntu 14.04.2 LTS - 64 bit.
    # lspci -vvnn | grep -A 9 Network
    02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
        Subsystem: Lenovo Device [17aa:b736]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 3000 [size=256]
        Region 2: Memory at c0400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
            Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Can anyone have idea how to enable it and it will work smootly.

    Hit the F7 key (the one with a white aircraft on it...). This is a kind of turn on/off button for the wireless inteface.

  • It seems my Wifi on/off button has become disabled.  Any ideas as to how tom enable and turn on?

    It seems my Wifi on/off button has become disabled on my IPhone 4S.  Any ideas as to how to enable it to turn on?

    I been having the same problem with my iPhone 4S my iPhone its upgraded to the new version and my wifi does not want to turn on its dim gray I tried reseting it and pressing the home and the power button i have resset my network setting but its no help I don't know what else to do?

  • How to enable wifi

    how to enable wifi in my HP 15-ac044TU Notebook i am using windows 7 64 bit i press f12 but this is not eable to enable the wifi please let me know the process to enable the wifi

    Hit the F7 key (the one with a white aircraft on it...). This is a kind of turn on/off button for the wireless inteface.

  • How to enable ToDo in Mail

    I have two mail accounts, one POP account, and MobileMe. The ToDo feature appears to be disabled on the POP account. The commands are gray on that account. However, when I choose an email from MobileMe I can select text and create a new ToDo item. I can't find any information on how to enable that feature if it's disabled.
    My wife has the same sort of POP account on her Mac and everything seems to work fine.
    Thanks.

    For ToDos to be available to an account, the account must be tied to a calendar server. ToDos are not part of Mail but part of iCal. You can create a ToDo by selecting some text in an email and right-clicking to get the contextual menu.

  • HT204053 How do I get wifi on my iphone

    How do I get wifi on my iphone

    Hello Pamelay36,
    The following article details how to enable Wi-Fi and connect to networks with your iPhone. It also details some useful troubleshootin steps should you experience any issues connecting.
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Cheers,
    Allen

  • How to enable WPS on Westell 327W

    I know I need to go into the router http://192.168.1.1/ but I have no idea what to do once I get there.  I bought Netgear WNCE2001 Universal Wifi Internet adapter to connect my direct tv receiver to the internet...but I don't see how to enable the WPS
    Thanks
    Julie

    jmwolff1 wrote:
    it doesn't support WPS?  Why does it say it does in the product specs?  That I looked into several times and my understanding was that it did and I just had to go into the router to enable it. 
    I am not sure where the "command prompt" screen is.  Is it when I log into http://192.168.1.1?
    I am trying to get my direct TV wirelessly linked to the internet using the adapter.
    When you go to 192.168.1.1 do you see a blue-and-white web page, or do you see a red-and-black web page?
    If you see a blue-and-white web page, then the 327W is running the original firmware that came from Westell.  If you see a red-and-black web page, then the 327W is running the newer firmware that Verizon made available a few years ago.
    There are some wireless devices that will not work when communicating with the blue-and-white firmware.  I had a 327W and a Sony blu-ray player that would not talk to each other no way no how, until I downloaded and installed the red-and-black firmware.  Then the routine set-up worked.  There are other wireless devices that communicate just fine with a 327W, no matter which version of the firmware it's running.
    I can't tell you whether you need to update the firmware in the 327W or not, but I hope the above helps. 
    About six months after I updated the 327W firmware, the 327W bit the dust.  I ended up getting a newer 7500 from Verizon, for less than $3.00 a month.
    If it were up to me, I would call verizon and ask them if the can replace the old 327W with a 6100G or a 7500, depending on my needs.  Failing in that, I would go down to a store and buy a server end wireless adaptor that plugs into the 327W, and set one of the two devices to bridge mode.  I've never done that, so I'll let others tell you how.  I don't like that solution, because it involves one more box.  I like to keep things as simple as possible, but not simpler than that.
    Once you have working hardware and firmware, setting up the wireless service is fairly intuitive, provided you understand the basics of what is going on.  The complexities come into play when you try to set your configuration to make your wireless network somewhat secure.  Depending on your location, this may be necessary to keep people from accessing your local files via a wirless LAN connection. 
    If I can find it, I'll try to get back to you with the location of a website that explains how to use the interface you get to when you go to 192.168.1.1.  By the way, if you go to http://dslrouter you should get to the same screen.  I find that easier to remember than the numbers.

  • HT202663 I have Mountain Lion 10.8.4 and want to find how congested are channels 1 - 13.  Seems to be easy with 10.8.3 and earlier but cant for the life of me find it in 10.8.4.  Can anyone help?

    I have mountain lion 10.8.4 and want to find how congested are channels 1-13 on my router.  How do I do this please?

    I'd suggest you get WiFi Explorer from the Mac App Store. For only $3.99 I find it well worth the cost for the ease of use and better info in relation to the built-in tools.
    Regards.
    Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Communities. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

  • Enable Cookie/Wifi connection for curve 8900

    Hi,
    Anybody know how to enable cookie for curve 8900? I've tried clearing cache history already but no luck.... I can't access to gmail, hotmail and yahoo mail due to this error.
    Also, would you have any idea if this is related to the error 65 when I'm signing in to windows live messenger and yahoo messenger?
    I'm also having a problem connecting to Wifi, it can detect the wifi network but won't connect, anybody know hot to fix this?
    Thanks,
    Kim

    Hi ninarollaine,
    Do you currently have a BlackBerry data plan with your wireless network provider? Some network providers requre you have a BlackBerry data plan to browse, even when on Wi-Fi.  I would recommend contacting them for more information.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to enable Virtual Surrou

    Hello,
    I noticed on this Creative page: http://www.soundblaster.com/products/product.asp?category=&subcategory=206&product=035& nav=3
    It indicates that my sound card (the creative Li've! 24-bit) supports "Virtual Surround over 2 Channel or Headphones"
    I have a 2 channel setup. How can I enable virtual surround?
    Thank you

    Trek234,
    I believe you are referring to the CMSS feature of the card. You can check the sticky 'How to enable sound for my center, rear and sides speakers?' at the top of the board. It will show you where to turn on CMSS.
    Jason

  • How to turn on Wifi direct on HP LaserJet 1102w without using a network

    I have a problem with wifi direct, I cannot enable that without using a network because only I can enable this feature with connecting the printer to a preconfigured network and then accessing printer's setting by its IP on the preconfigured network, When I turn on wifi direct on printer I can connect directly to it but if I turn off the preconfiqured network and try to connect to wifi direct I get a problem and I'm not be able to use wifi direct, also the green light on the printer starts to blinking. I want a method to enable wifi direct on my printer that could work without another network. please help.

    Hi , Welcome to the HP Forums! I understand that you are wondering How to turn on Wifi direct on HP LaserJet 1102w without using a network. I am happy to help!  Please, take a look through this guide, Printing with Wi-Fi Direct. This website, HP Wireless Printing Center - Wi-Fi Direct and HP wireless direct, also has some information for you!  Hope this is helpful!  “Please click the Thumbs up icon below to thank me for responding.”

  • My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help

    My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help
    [email protected]

    The following article(s) may help you.
    Troubleshooting AirPlay
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

  • How to create a wifi network with macbook.

    How to create a wifi network with macbook? I dont have wifi for my itouch. I am trying to create a wifi through my macbook for my itouch. does anyone know how that works? thanks

    Open the Sharing pane of System Preferences and enable Internet Sharing over AirPort.
    (59391)

Maybe you are looking for