How to enable Command-Tab to switch applications

I just upgraded to Lion from Snow Leopard in my iMac, but for some reason Command-Tab is not working.
I already restarted the computer and checked the option (it was already checked) System Preferences / Mission Control and tick "When switching to an application ...", but still not working.
What can I do ?

There is nothing to enable. The option you checked has nothing to do with the application switcher.
You could look through the keyboard shortcuts and see if anything has hijacked that shortcut.
Try starting up holding down the shift key. That will start up in safe mode and disable any third-party programs that might be affecting it. It also does a disk check, so it takes some time. See if it works in safe mode. If so, try restarting normally and see if it still works.
If it works in safe mode, then it is likely you have something that is interfering with it.
As another troubleshooting step is to log in as another user. If it works there, then you have something in your particular user setup that is causing the problem. If it doesn't work, then it is a system-wide problem.

Similar Messages

  • Command-Tab App Switcher doesn't work (related to corrupt .plist file error?)

    Hi folks,
    The other day, Drive Genius 4 reported on a file corruption:  ~/Library/Preferences/System Mac.plist file. I tried to find the file but it didn't appear to exist.
    Today, a strange phenomenon occurred which I think may be related. Strangest thing. I was using Safari, had several tabs open when, suddenly, I lost all input to any links in Safari and system wide as well, other than the cursor being able to move around the display. This dysfunction also included the Command-Tab App Switcher, though they keyboard text function still worked. I could enter text in fields.
    I tried Force Quit Apps but I had to shutdown and reboot using the Power button. The reboot seemed to remedy the situation and most controls and keyboard functions returned except for the Command-Tab App Switcher.
    In Safari, I used History/Restore Last Open Page, and when the searched for pages came up, they were blank - I was informed that there was no internet connection. Wi-Fi showed still on but grayed out, which could be logical. Also, this is when I noticed that the key repeat function wasn’t working. In System Prefs, I did manage to change the key repeat rate, which accelerates the backspace erase function but there is no key repeat, itself.
    All of this, of course, might be pointing to that system file error. Whether it is that hidden Mac.plist file corruption I don’t know.
    In any event, first thing I did was to run Permissions Repair. At one point, about 2/3rds of the way in, the progress bar hung for a few minutes and then finished the last third in a split second. In the Repair Permissions log there was no /Mac.plist file among those repaired.
    Additionally in Sys Prefs, I tested for Tab key response by refocusing the radio buttons in the Full Keyboard Access option under Keyboard/Shortcuts panel from "Text boxes and lists only" to "All controls.” The refocus worked because now pressing Tab does move the cursor through every control. But still no Command-Tab App Switcher. In Spotlight, I did find the App Switcher.app but it would not open, because it is “Damaged or Missing.” App Switcher preferences are  also not accessible.
    In Terminal I changed directories and do see the /Mac.plist file under discussion. I suppose I could -rm the file but I’m reluctant without knowing more about what other anomalies might result. The App Switcher is one of the Mac’s best utilities (thanks to er, Microsoft.) If the /Mac.plist file will refresh from the current status, no problem, I would think.
    Has anyone experienced anything like this? Any suggestions? Thanks a whole lot in advance for your time and consideration in this!
    All best,
    David

    First, get rid of the worthless, time-wasting "Drive Genius" according to its developer's instructions. Never install any so-called "utility" again.
    Don't waste time repairing permissions again, either, unless you have an indication of a permission error involving system files, which you don't and probably never will.
    Never delete any file in the shell (Terminal) for any reason.
    There is no built-in application called "App Switcher." There is no built-in file named "System Mac.plist" either.
    If command-tab application switching still doesn't work after you get rid of "Drive Genius," see below.
    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • How to enable reresizing tabs after closing tab?

    How to enable reresizing tabs (like in older version than 5) after closing tab without mouseout?

    You can use one of these extensions to set a default font size and page zoom on web pages:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • How to enable Design tab in jdeveloper 11.1.1.5.0

    Hi ,
    I am creating the SelfRegistration work-flow.While opening the xml files in the jdev,the design tab is not there.Only source and history tabs are there.how to enable that one.
    Pls anyone suggest me ...
    Jdeveloper version-11.1.1.5.0
    Regards,
    Deena.

    well user,
    why are you creating such duplicate.
    Re: Unable to find Design tab in jdeveloper 11.1.1.5.0
    well our discussion is going on above thread.. but why are switch another thread.

  • Command tab stops switching spaces

    Occasionally, cmd+tab will stop switching spaces when you switch applications. The issue will go away if I log out and log back in. I haven't been able to cause it on purpose, and can't determine which combination of applications causes it.

    Hello there, Brandon.
    The steps in the following Knowledge Base article provide a good step for your issue:
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    If the issue persists after the PRAM reset, then use the following to troubleshoot further:
    Mac OS X: How to troubleshoot a software issue
    http://support.apple.com/kb/ht1199
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro

  • How to enable purchasing tab in BOM, while defining bom for a item

    dear gurus,
    while defining a bom for a item, there ae various tabs like main, effectivity, OM etc. among that purchasing tab is in disabled state. how to enable that.
    pls provide setup and whats actual use of that.
    waiting fr reply.

    Dear,
    For a phantom assy the special procurement key in the material master should be 50. You have done the right thing.
    But in the BOM of FERT please remove the phantome assy Off indicator. Once you maintained the special procurement key 50 in material master, the phantom indicator will be acutomatically set in the high level bom.
    Hence if you activate the phantom assy off then this will override the phantom indicator
    For more understanding please see trhe below links
    http://www.sap-img.com/production/what-exactly-is-a-phantom-item-or-assembly-means.htm
    Regards,
    R.Brahmankar

  • How to enable print button appear on 'application toolbar'

    hi guys,
    may i know to enable print button appear on 'application toolbar' by using CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'?
    thanks.

    Hi,
    Create a PF status in SE41 with all the status which you required.
    Like save, exit, cancel and print.
    Then you include this staus in  the importing parameter
    ( I_CALLBACK_PF_STATUS_SET ) of Function module REUSE_ALV_GRID_DISPLAY.
    If you doesnt give any status also, by default you can seen the print option in status.
    Try with this and let me know

  • How to set active tab in PCUI application

    Hi,
    we are using PCUI application for activity management. We are also using surveys.
    If a user selects an existing activity from the search result list instead of tab "Details" the tab "Survey" should be set as default.
    I found out that the event behind is ACT_SURVEY. But how and where can I raise this event?
    Regards,
    Sina

    Hello Adil,
    I tried your suggestion. Doesn't work.
    When I add the survey tab via customizing on a position lower the 010 (details tab) then I get an exception from the onlayout method.
    So I tried to change the position via method check_active_tab. This works, survey appears at first position. But the details tab keeps choosen although it is the second tab now. When I chose the survey tab it changes its position to the original position.
    Do you have any other idea? Is there a way to invoke the event act_survey?
    Kind regards,
    Sina

  • How to enable delete tab to work in bridge cc?

       The delete tab on the keyboard does not work in Bridge CC.
    When I hit ctr.-delete, it still does not function.

    Try to reset preferences it may help:
    Quit the application. Launch Bridge and IMMEDIATELY hold down Ctrl + Alt + Shift (Windows) or Command + Ctrl + Option + Shift (Macintosh), when Rest Setting dailog box open select Reset Preferences.
    Also Ctrl-Delete it may be use to other OS system shortcut.

  • Keychain: How to enable automatic access for certain applications?

    I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine, and Quicksilver neeing my system password all the time when installing updates.
    How do I enable automatic access to the keychain and system password for certain applications, but not all?
    PowerBook G4, 1.5 Ghz   Mac OS X (10.4.6)  

    Hi, Bjørn.
    A. You wrote: "I have gotten really tired of Adium and Skype asking for the keychain password every time I reboot the machine..."There are two things to check. You'll use Keychain Access — in the Macintosh HD > Applications > Utilities folder — for both.
    One key point to note before you begin: If the affected account was created under Jaguar, it's default keychain will have the same name as the account's short name. Accounts created under Panther or later have the default keychain name of "login." The user's default keychain is always highlighted in bold in the Keychains list in Keychain Access. All of the instructions in Mac Help regarding keychain assume the accounts were created under Tiger and always refer to keychain "login."
    Here are the two issues to check and correct:
    1. The affected account may have its keychain preferences set so that the keychain locks automatically after a period of inactivity or after sleep mode:1.1. Select the user's default keychain.
    1.2. Click Edit > Change Settings for Keychain "keychain_name."
    1.3. Deselect the checkbox next to "Lock after __ minutes of inactivity", if selected.
    1.4. Deselect the checkbox next to "Lock when sleeping", if selected.
    1.5. Click Save.2. The affected account's login password and keychain password are different. Set the keychain password on that account to be the same as the account's login password. See “Mac OS X 10.4 Help: Changing your keychain password.”
    Once those steps are taken, if an application requests access to the keychain, click Always Allow.
    Note that if you update applications, i.e. install later versions, you may be asked once to confirm the new version's access to your keychain. That's a standard security precaution.
    B. You wrote: "...Quicksilver neeing my system password all the time when installing updates."That cannot be prevented if that application is installed in the Macintosh HD > Applications folder using an installer, such as the Mac OS X Installer. Authentication is required if an installer will add or change files in either Applications or other System-related folders.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to enable SSO for ADF 11g application

    Hi All,
    I am new to ADF 11g. I need to enable SSO authentication for a ADF 11g application.
    Please let me know if we have any document to follow to perform the configuration.
    Thanks
    Sai

    Check this out
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15478/opssadf.htm
    -Arun

  • How to enable Navigation tab in PDF

    Hi,
    Can any one help me on this.
    I have nearly 100 PDF document. When I open the PDF,  the pdf should opened with Bookmark  view.
    I found this option under Document Properties --> Initial View --> Navigation tab  (Bookmarks Panel and Page).
    But i need to automate this task for all pdfs as Action list. can anyone help me to write a code for this.
    Thanks,
    Gopal

    Thanks Gilad.
    But I am unable to find this optin under Document processing.
    I am using Acrobat 9 Pro version.
    Please help me on this.
    Thanks,
    Gopal

  • Command-Tab Problem

    I had a small problem and was wondering if I could get some help on it. Whenever I push command-tab to switch applications it only changes the bar up top but the application doesn't show. For example if I am in iTunes and want to switch to Safari using just command-tab then the only thing that changes is the top grey bar switching from iTunes to Safari. I always thought this was how it was done until I was at a Apple store earlier and found multiple macs there brought up the whole application instead of just the top part. I'm sure its a setting I am missing but I wanted to know if anyone knows how to fix this?
    Thanks a lot.
    Matt

    My PB G4 Just started doing the same thing. I have no idea why.
    What seems to work to fix it though is to use cmnd-tab-shift to go back to the other application and then it starts working again.
    But that ***** and apple should tell us of a way to fix it.

  • Change keyboard shortcuts, e.g. command-tab to control-tab

    Any utilities for changing OS X keyboard shortcuts listed in
    http://support.apple.com/kb/ht1343
    such as  control-tab  rather than  command-tab  for  'Switch application–cycle forward'  ?
    (Not the same as swapping  control  key for  command key)

    Safari browser and menu shortcuts:
    http://docs.info.apple.com/article.html?artnum=42951
    Mac OS X keyboard shortcuts:
    http://support.apple.com/kb/HT1343
    http://docs.info.apple.com/article.html?artnum=75459
    Changing behavious of Function Keys:
    http://support.apple.com/kb/HT3399?viewlocale=en_US
    and more useful information on keyboard shortcuts here:
    http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts
    How to re-map individual keys:
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&item_id=ukelele

  • Switching application shortcut problem (COMMAND+TAB) and (COMMAND+`)

    Hello everyone
    Since the upgrade Leopard i had a problem with the switching apps shortcut.
    Once you start the switching apps forward shortcut (COMMAND + TAB), the switching apps Backward shortcut (COMMAND + `) won't work anymore. The only thing that make it works it to use (COMMAND + SHIFT + TAB) which is not good. It gives me cramp in my left hand! HA!
    Anyways I check out petty much everywhere in the settings where I could find a customize shortcut for that. But I didn't find it. I also check if is was not an other application who was taking the same shortcut and it is not the case.
    Can somebody help me on that one.
    I know it is not a big deal but... still.
    Thanks everyone
    Benoit

    Some applications allow you to set hotkeys (Quicksilver, a 3rd party app, is the example I used -- this is not included with OSX). I was thinking that perhaps some other application you have was using the hotkey cmd-tab and stealing it from the finder.
    You can also change the 'meta' keys in the system 'Keyboard and Mouse' prefereneces (click on keyboard -> modifier keys) -- this maybe is confusing things if its not set to defaults.
    There's also a 'keyboard shortcuts' tab under keyboard and mouse, look under there e and see if there's anything involving tab (by default there shouldn't be).

Maybe you are looking for