How to enable directory binding in Server Admin?

Running Server 10.4.9
I cannot enable directory binding in Server Admin.
The checkbox becomes un-ticked upon save.

Hi marc
There must be something in the way you have configured your Server that is preventing this from happening. I maintain two OD Master servers at a remote site and both of them do not have your problem. I don’t know of any Terminal commands that control directory binding and there seems to be no reference to it in the Terminal Manual 2nd Edition. However, that does not mean there won’t be one. Both servers I administer do not have ‘require clients to bind to directory’ ticked, but do have Enable directory binding ticked. These settings seem to have been set this way when promoting from Standalone to Open Directory Master once DNS and DHCP were configured and running as Services. By the way all settings in this part of Open Directiry I can access and modify with no problems on both servers.
Is DNS being supplied by another server as well as authentication eg: from an AD KDC? Also how do you connect to your Server using Server Admin? Do you use the .local name or its IP address? Have you tried using the FQDN?
HTH

Similar Messages

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know each Java Class that is involved in flow.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

As a JSF Developer, I want to understand technically how the JSF View Components are rendered as html and how there events are binded to Server.I want to know how flows goes to the server and server understands the method which is to be called of managed bean. I know it is with annotation @ManagedBean and method name, but how Call is binded with annotation @ManagedBean.
In short, i want to know the internal implementation of JSF Framework.

How to enable hibernation in Windows Server 2008 R2

Hi
I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
Also checked with powercfg /energy & getting given below errors.
Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
The hardware in this computer does not support the S3 sleep state.
Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
The hardware in this computer does not support the S4 (Hibernate) state.
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
with the hardware in this computer.
Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
Thanks.

Hello,
I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to see directory in app server

how can i see the directory in application server if al11 is not accessible( i have no authorization to see al11 in testing server).
my problem is i have a zip file in the pplication server,
in development, i am unzipping the fle using the function module SXPG_CALL_SYSTEM.
it is returning sy-subrc = 0. and it is working fine in development sever.
iam downloading the same zip file and uploading the same zip file into testing server.
while uploading iam getting success message. this means the file is created.
but again when i run the same function module in testing server to unzip,
iam getting error code 2. (error in external program suffix...).
but i donno where it is going wrong. to check the directory, i dont have access to al11. any solution?

Hi
Run AL11 and goto Tcode SU53 check the authorization there whether u have it or not.
Regards
shiva

How to setup Web Proxy within Server Admin utility?

Hi. We currenlty use the Web function within the Server Admin utility for all our web hosting applications running on Snow Leopard server. Recently we had a vendor create a website application which needs a proxy setup in order work. According to them, we need a proxy to 127.0.0.1:8000 for the site. At the moment, they manually edited the .config file for the website to edit the proxy settings which consequently caused the Web function within Server Admin to stop functioning properly as I found a website stating that if a config file is manually edited outside of the Server Admin, the Web function will not function properly. The error message I got was "Uncaught exception raised in Web client-side plugin".
The .config file which was manually edited is as such:
<VirtualHost **.**.**.***:**>
    ServerAdmin [email protected]
    ServerName demo.segmentthis.com
    ServerAlias demo.segmentthis.com
    ProxyRequests off
    <Proxy *>
Order deny,allow
Allow from all
    </Proxy>
    <Location />
ProxyPass http://localhost:8000/
ProxyPassReverse http://localhost:8000/
    </Location>
</VirtualHost>
I supposed my question is, is there a way to edit the proxy within the Web function of Server Admin instead of manually editing the config file?
I hope that made some sense but if not, please let me know and I will try to elaborate a bit more.
Thank you very much for your help!

Your question here appears related to or a continuation of this previous question — is this the case?
Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80? (Got a pointer to the package? We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
Are you running 10.5 or 10.6? Both are pretty old releases.

How to validate directory on the server in sap

Hi Experts,
i need to validate directory on the server in sap
similar like validate directory on the local in sap using fm "GUI_GET_FILE_INFO".
i need just like this fm which will validate directory on the server in sap.
Thanks
Nag

Hi nagraju,
We can use this kind of code, to detect whether folder exists on sap server or not.
(Note, if it is unix/axis OS on server, the path with lowercase / upper case is very important. It is case sensitive. You can check in t-code AL11).
report abc.
data : files type table of RSFILLST with header line.
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
*    DIRNAME            = 'aa' "<--------- not found
    DIRNAME            = '/usr/sap/tmp' "<---- FOUND
    FILENM             = '*'
*   PATTERN            =
TABLES
    FILE_LIST          = files
EXCEPTIONS
   ACCESS_ERROR       = 1
   OTHERS             = 2
if sy-subrc <> 0.
write :/ 'no such folder'.
ELSE.
write :/ 'folder exists'.
endif.
regards,
amit m.

How to enable monitoring of SCCM Server from SCOM

Hello,
I have installed SCCM Management Pack of Version 5.0.7804.1000 on SC0M 2012 R2 ,After installation checked out most of features are not monitoring state ,How to enabled these monitored ?
Like below snap as example :
Thanks
RICHA KM

For monitor SCCM, verify from following
Enable Monitor to Rules
Make sure your agents run as Local System
Enable agent proxy for site servers
Create an override MP for your tuning specific to this MP.
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2012/12/11/monitoring-configmgr-2012-with-opsmgr.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

How to enable realms in Lion Server?

Hey guys, in Snow Leopard Server I was able to enable realms to password protect a part of my website. How do you do that in Lion? A quick Google search revealed nothing. How are you doing it? Thanks for your help!

Before you password protect your site, you will need to create a Group of people you want to have access. If you have already created a group and added users to it, skip to step 8.
1. In the Server app, under Accounts, select Groups on the left.
2. In the Groups menu in the right pane, click the + button.
3. Give your Group a name and click done.
4. Go to Users, under accounts, on the left.
5. Select the Users you want to be apart of the group by holding down command and clicking on them.
6. When you have all of the users you want to be apart of the group selected, double click one of them.
7. Click the + button and begin to type in your Group name. It should autopopulate your group name after a few letters. Select the group, then click Done.
8. Under Services, select Web.
9. Select the site you want to add password protected areas to.
10. Click the pencil button.
11. Under "Who Can Access:", change "Anyone" to the Group you have created here, or choose "Customize..." to select specific folders within your site to password protect.
12. Click Done. Now the desired parts of your site will be password protected.

How to enable javascript in windows server 2008 R2 enterprise ?

Hi all,
Hope doing well,
sir i am using windows server 2008 R2 enterprise operating system.
i am running my web application in localhost. it's working fine.
but i have used timer using javascript and some javascript function that is not working in this application.
i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
enabled javascript and my application is not working.
plz help me. it's urgent
waiting for reply.
thanks in advance.
vicky Bangalore

Hi Vicky,
Please make sure that the Javascript is enabled on you IE.
To do this, please go to Control Panel->Internet
Options, click on security tab,
click on customer level button. Please scroll
down to Scripting, underScripting
of Java applets, click enable.
OR
Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

64bit Solaris - how to enable it? Need server flag or d64 ??

JRE 1.4.2
Solaris 9
To enable a 64bit server product, do I have to use any flags besides "-server" flag ?
I can't seem to find any documentation on this. The closest thing I came across was the release notes documentation for 1.4.2 in its change history section under 1.4.0 where it mentions this:
"The SolarisTM-SPARCTM platform edition of J2SDK 1.4.0 will support
64-bit operation on 64-bit Sparc-v9 platforms when using the Java
HotSpot Server VM. With a 64-bit address space, more than four gigabytes
of heap memory is available. The Java HotSpot Server VM includes support
for both 32-bit and 64-bit operations, and users can select either
32-bit or 64-bit operation by using command-line flags -d32 or -d64,
respectively.
* Users of the Java Native Interface will need to recompile their
code to be able to run it on the 64-bit VM.
* There is no 64-bit support for the Java HotSpot Client VM. Only
the Java HotSpot Server VM provides for optional 64-bit
operation.
* Users must install 64-bit Solaris support in order to run the
virtual machine in 64-bit mode.
* On older Sparcv9 systems, users must modify the file
/platform/sun4u/boot.conf in order to enable 64-bit programs.
See the text in the boot.conf file for more information."
The full link:
http://java.sun.com/j2se/1.4.2/docs/guide/vm/index.html
but that is under JRE 1.4.0. Has anything changed since? do I still need the "-d64" flag or would the "-server" flag suffice.

Hi
Besides the 32bit installation, u will need to install the 64bit version.
Add -d64. To confirm you have it, just do java -server -d64 -showversion
http://java.sun.com/j2se/1.4.2/install-solaris-64.html
http://java.sun.com/j2se/1.4.2/docs/guide/vm/index.html
Hope this helps.

How to enable printer redirection in server 2012 (client printer should map in server 2012)

Hello All
I have 3 new 2012 servers by default client printer should map in 2012 server i have enabled in RDP properties but no luck can any one have the idea about this issue.

Hi Mohan,
You can refer below links to configure Printer redirection in Windows Server 2012.
Print and Document Services Overview
Configuring Printer Redirection Settings
Printer Redirection
Regards,
Manjunath Sullad

How to enable alerts for app server?

We have setup a central autoreaction for our ECC6 system. Central autoreaction is in solman.
We have registered separate sapccm4x agents in the CI and apps instances & both are ONLINE in solman. But when we try to assign the central autoreaction to the system in RZ21, it only assigns to the CI, not to apps instance.
How can we assign the autoreaction to the app instance?
Note: We do not want to use solman BPM, so please do not suggest that.
Thanks
Prasad

Hi prasad,
You cannot assign any central auto-reaction methods to the MTE classes that belong to the application servers of CEN as described below.
In this case, use the conventional assignment using a local auto-reaction method, means assign directly.
look at the constraints as described below
.[http://help.sap.com/saphelp_nw70/helpdata/en/ac/825f18c02e454dac8da51f4eb22265/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/ac/825f18c02e454dac8da51f4eb22265/content.htm]
jansi

How to enable Alerts in Project Server 2013

Dears,
I am using Project Server 2013 trial edition to manage project in my organization. The problem is that no alert emails are sent to team members when there tasks expire.
I have check relevant settings in both SharePoint server side and project server side.
btw, members can receive notification email when project manager updates the project or assign new tasks to them.

Hi,
The Alerts and Reminders Project Server settings page in SharePoint Central Administration is used to configure notification email settings in your Project Server 2013 environment.
You can refer this article which explains about alerts and notifications in Project Server 2013
https://technet.microsoft.com/en-us/library/jj635886(v=office.15).aspx
Thanks,
Phani

How to enable UPTIME notificaton of Server in nagios

Hey!
Can you look into this issue:
I want to add uptime monitoring on Nagios, but after the configuration its says
Return code of 127 is out of bounds - plugin may be missing)%uFEFF
This topic first appeared in the Spiceworks Community

While preparing to demote a DC I ran dcdiag and it's failing while attempting to register records in our external dns server at rackspace. I can only assume that since we use the same domain externally, and for AD, that the domain controller is seeing rackspace as authoritative and attempting to create the test records there. Has anyone seen this behavior before? It's never been a problem until now, and this issue did not appear in the logs when I demoted another DC earlier tonight.
Log:TextAn error event occurred. EventID: 0x0000168E Time Generated: 11/15/2010 15:37:52 Event String: The dynamic registration of the DNS record 'ForestDnsZones.contoso.com. 600 IN A 192.168.1.234' failed on the following DNS server: The DNS server it goes on to list is the public IP of our rackspace DNS.There are many of these errors listed as it attempts...

Can´t start Directory Bind on OpenDirectory Server

Hello folks -
I´ve a problem to start the directory bind in the serveradmin.
I just want to connect my mac clients to the existent Open Directory, but it didn´t work.
The OD master runs on an xserve 10.4.11 including fileservice. A other xserve is configured as OD replic and Keriomail. I want a single user login for all services, and most things are working fine (mediawiki, mail, print,file etc.) but not the client directory binding...
I can configure the OD in the dirctory access utility, but if I restart the client, I can´t login with an user that´s configured on the server. After checking all the configurations on the server and reading logs i have seen that the directory bind in server admin doesn´t work. If I try to turn it on, it´s unchecked after saving.
I can´t delete the OD and setup a new one, because to many service are allready in use from more then 80 employees
anyone an idea?
thanksfully

Hi All,
Whenever i am trying to start control centre service using start_service.sql on server it fails with /owb/bin/unix/run_service.sh not found.
I ran the service_doctor.sql and got the following
There are errors in one or more PL/SQL packages and functionsPlatform properties have been loaded correctly
Platform location has been seeded correctly
NLS messages have been loaded correctly
The platform service is not available
There is a problem accessing the service startup script from the database server
Here is the detailed error message which contains the name of the start script file:-
Service startup file 'null/owb/bin/unix/run_service.sh' is not accessible from the database server on instance number 1
Please verify that the disk containing the file is visible to the database server
Please verify that the database server account has access rights on the fileConnection information stored within the repository is correct
PL/SQL procedure successfully completed.
What i need to fix this issue ('null' is attached)
Thanks,
Sam.

How to enable directory binding in Server Admin?

Similar Messages

Maybe you are looking for