How to enable disabled iphone 5s?

I know my passcode but my lil son tried many wrong combination it seems and it got disabled. Also he threw my laptop and i lost itunes connectivety too. Now how can i enable it? Please answer asap. TIA

You'll need to borrow someone else's computer and restore it as new using iTunes. There is no other way to re-enable it.
~Lyssa

Similar Messages

HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

HT1212 I followed the steps on how to enable my iphone but there still no response. Do you have other suggestions on how I can enable it? Thank you!

I followed the steps on how to enable my iphone but there still no response. Do you have other suggestions on how I can enable it? Thank you!

Hi Stefanie Burger,
Thanks for using Apple Support Communities.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario

How to Enable/Disable suppressUpload and suppressDownload

my xml doesnt have this attribute
how to enable /disable supressUpload and suppressDownload.
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZAM_09" version="09">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZAM_09" version="2" type="twoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="true" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="BUKRS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN1" type="C" length="12" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="ANLN2" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="KOSTL" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="WERKS" type="C" length="4" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STORT" type="C" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXT50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="TXA50" type="C" length="50" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>

Just adding on to Nameeta's post, there is a supress download checkbox in the advanced setting s link(Settings -> Advanced Settings) on the client, this will supress downloads for all syncbos and not just for any one syncbo. Also there are no tools in the middleware to add these settings, the only way to do this is to modify the xml manually.
Best Regards,
Karthik
Message was edited by:
Karthik V Setty

TS2890 how to activate disabled iphone?

how to activate disabled iphone?

If your phone is disabled then there are instructions on this page for how to reset it : http://support.apple.com/kb/HT1212 - you should then be able to restore/resync your content to it

How to unlock disabled iphone 5s

Dear sir,
i have disabled my iphone 5s, how to unlock disabled iphone 5s.
with regards
Amrinder singh

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Does anyone know how to enable/disable a dropdown menu in Forms at runtime?

Is there a way how to disable/enable dropdown menu for menus that have multiple sub levels in Oracle Forms? I am trying to use the set_menu_item_property function but this takes 'menu.item' format for the first argument. I am trying to enable/disable a menu item in the form of 'menu.item.subitem' and was not able to do it using this function. If anyone knows a different function or method, please reply. I have shown an example below.
Setup -> Software -> Front Page
From the above example, I can enable/disable Software using set_menu_item_property function. But, how do I enable/disable the Front Page menu in Oracle forms at runtime?
Thanks
Edited by: user480347 on Aug 24, 2010 3:37 PM

Yes you are on the right track. You need to pass then complete menu name to set_menu_item_property
Immediate_parent menu.item_name e.g
For example you have menu like this
Id like
A1 A10 > A1010
Home > Input > Form 1
A1 A10 > A1020
Home > Input > Form 2 To disable Form 2 you must pass menu name as
A10.A1020Hope it helps

How to enable /disable MWI ?

Hi,
I want to write a small application to enable/disable IP Phone lamp. But confused by how to enable MWI(Message Waiting indicator). TAPI ? AXL ? or some others , which can implement it . Could you give me some direction, thank you !

I never checked what happens on a database level. However, for any actions that have a direct influence on a device, writing directly into the database is the wrong approach.
As an example: if you set a forward (callforward all) via database (and not AXL), calls may well be forwarded, but the phone's status won't be adapted (so you don't have the callforward indicator and no information about the callforward). If you set the callforward via JTAPI or AXL, the phone's status will also be updated to show that it has been forwarded.
When you configure a phone, you'll see the same thing in many cases.. especially in older CCM releases, you were often told that you need to reset the phone to apply a change you've made. In newer versions, this is often (but not always done automatically.. you'll see the phone restart after pressing update).. it's the same thing here.. you write into the database, but then you also have to apply those changes to the phone (one good example is changing a line label.. you won't get the label to change on the phone by just writing to the database.. you have to restart the phone for it to load the new label name).
Even if you need to get the mwi status, JTAPI will do that for you (CiscoAddress.getMessageWaiting - and to set it, it's CiscoAddress.setMessageWaiting). Since you need a CTI command to set the MWI, you can as well resort to CTI to get the MWI status as well and don't bother with the database.
fkcallingsearchspace_mwi is definitely not it though - I can tell you that without looking at the diagram since fk_anything is a foreign key and you have an uuid value in that field. The mwi status would be a boolean since it can have just two values. In fact, it's numplan.ismessagewaitingon but as I said.. with any element that has a direct influence on a phone's appearance or behavior, you cannot just change it... at best you need a phone reset. And if you do it with JTAPI (and probably TAPI too.. I can't be sure because I've never done TAPI and hope to never have to), you can change the MWI status on the fly without having to restart the phone, which is much more elegant.

How to unlocked disabled iphone

how do you unlock a disabled iphone 4

Restore the iPhone from the computer to which the iPhone is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the iPhone into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
Regards.

How to enable/disable button

Hi,
i m new to pcui, i got how to hide the button in toolbar group. but could you please guide be how to enable r disable the button which is in toolbar group.
thanks in advance

Hi venkat,
Follow the step, it's example of Lead CRMD_BUS2000108 & View is *ZMSR_RE5 *
1)     Go to CRMC_PCUITOOLS.
2)     Go to Analysis Tools -> Determine the Correct Model Access Class.
3)     Give Application - CRMD_BUS2000108 & View ZMSR_RE5 & execute.
4)     Click on New -> MFT Sales (Transaction type)
5)     Note Toolbar Group - > LEA_SR_50.
6)     Go to CRMC_BLUEPRINT_C.
7)     Go to Toolbar Group -> Toolbar Group Structure.
8)     Give Toolbar Group - LEA_SR_50.
9)     Search for ZMSR_RE5 Toolbar elements.
10)     Click on Details.
11)     Check whether FLAG is Not Set in Exp. Display. Choose Flag set Event has Occurred to Hide the Button.
it will help u
On.........................

How to Enable/Disable MessageTextInput Read Only property in PFR?

Dear All,
When i click on a submit button i need to enable/disable the Read only property of MessageTextInput item.
Can any one tell me how to do this?
I am executing the code
if (pageContext.getParameter("EnableBT") != null) {
OAMessageTextInputBean beanEmployeeIdCL = (OAMessageTextInputBean)webBean.findIndexedChildRecursive("EmployeeIdCL");
beanEmployeeIdCL.setReadOnly(false);
When i used the above code in Process Form Request method it is showing developer mode exception in run time as we can call the above code only in Process Request form.
Request to please help regarding this.
Thanks & Regards,
CAK

CAK,
You need to make use of Partial Page Rendering (PPR) & SPELL. Modifying the bean property in PFR is not supported in OAF.
Refer - PPR section of Devguide for more.
Regards
Gyan

How to restore disabled iphone 4

how do you restore a disabled iphone 4

Wrong Passcode? If so, follow the directions here:
http://support.apple.com/kb/ht1212

How to enable / disable SSRS Parameter

Hi
I want to enable a parameter called "start date" (type is date) when another (value from dropdown) parameter is selected
Say for an example, i have below 3 parameters
1. drop down which 2 values called "vtextbox","vdate"
2. start (data type is date)
3. finish (data type is date)
when i select "vdate"value from the dropdown 2nd and 3rd parameters has to be enable
similarly when i select "vtextbox" value from the dropdown 2nd and 3rd parameter has to disable
I have searched many forums every one says this is not possible in report manager interface
But this is possible in custom code
please make a note all three parameters are independant
It would be great if any one provide the custom code for same
Regards
Santosh

Hi itsmesantosh1982,
According to your description, you want to use a parameter to control enable/disable other two parameters. Right?
In Reporting Services, when we create a parameter, this parameter has been enabled. The only way you want to disable the parameter is deleting it. In this scenario, disable the two parameter is same as selecting all values in these two parameters. So
we can just modify the default values in 2nd and 3rd parameter instead of using cascading parameter. We can create a dataset, put in the query below:
IF @Param='vtextbox'
select distinct startdate from [table]
else
select '[value]'
The [value] can be any value which is not existing in [table]. So when you select 'vtextbox', the default value will be all values in the table. If you select 'vdate', it will need you to select value automatically because the return value is not existing
in the table. This can be an effective workaround for your requirement.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to enable /disable a command Button based on a table's selectOne choice

Hi everyone.
I am using JDeveloper 10.1.3.3 and wish to enable / disable a commandButton based on the user's selection of the selectOne radio button.
The idea is that a row of a table may have an associated document so I want to enable or disable the button that downloads it based n the current row selected.
I have followed the advice on problem with table I defined my selectOne component as follows :
<af:tableSelectOne text="#{res['tables.selectionFacet.title']}"
    autoSubmit="true"
    attributeChangeListener="#{backing_browseCVs.onSelectionChange}">The function inside the backing bean looks like this
    public void onSelectionChange(AttributeChangeEvent attributeChangeEvent)
        // access the faces context
        FacesContext fc = FacesContext.getCurrentInstance();
        // get value of the expression #{row.hasCVDocument} that indicates
        // if a document has been added
        ValueBinding vb =
            fc.getApplication().createValueBinding("#{row.hasCVDocument}");
        Boolean hasDoc = (Boolean)vb.getValue(fc);
        // enable the doownload button accordingly
        downloadCVDocBtn.setDisabled(!hasDoc);
    }My problem is that the method never fires. I have placed a breakpoint at the first line but it is never reached.
Any advice will be most welcome.
Thanassis

Hi,
You might need to add 'dataProvider' part in the expression language in your selectionListener:
#{bindings.CVList.currentRow.[b]dataProvider.hasCVDocument}
#{bindings.CVList.currentRow} returns an instance of ViewRowImpl which does not have 'getHasCVDocument()' method, but does have:
Object getCurrentRow()
method, which returns objects from your CVList list, which do have getHasCVDocument() method...
Expression language is resolved through reflection, so when you write:
#{processScope.someClass.someReferencedClass.someAttribute} it is something like:
Get someClass from processScope map, then:
someClass.getSomeReferencedClass().getSomeAttribute()
It's a bit more complex but you get the idea.
Vladimir

How to enable disabled iphone 5s?

Similar Messages

Maybe you are looking for