How to Enable Firewall in Solaris 10 SPARC

How to Enable Firewall in Solaris 10 SPARC

What exactly are you looking for? By default Solaris is a secure operating system, but can be tuned to be more or less secure. The link above on IP Filtering is one way to make a system more secure, and is can be used to set up a firewall.
-- Alan

Similar Messages

  • How to Enable firewall on Solaris 10 SPARC Machine?

    Hi All,
    I have installed Solaris 10 SPARC & by default the firewall is disabled.
    Now i need to enable firewall?
    Can i know how to enable firewall Solaris 10 SPARC Machine?
    Also can i know how to open up specific TCP & UDP ports?

    What exactly are you looking for? By default Solaris is a secure operating system, but can be tuned to be more or less secure. The link above on IP Filtering is one way to make a system more secure, and is can be used to set up a firewall.
    -- Alan

  • How to turnoff firewall on solaris 10?

    hey everybody,
    do you know how to turn off the firewall on solaris 10 ?, because i installed 3 rd party program, and need to disable the firewall...
    thank you so much, for your help

    Hi,
    Can you please let me know how to disable firewall on Solaris 9.
    Does this command [*svcadm disable ipfilter*] disable firewall even on Solaris 9?
    Please let me know.
    TIA.
    Regards,
    Prashanth.

  • How to enable firewall

    Hi,
    i cant enable firewall in my mac pro. start button does not get highlighted. so i couldn't click it on there. so pls help me out on this...

    Open System Preferences > Security
    Select the Firewall tab.

  • How to enable multipathing on Solaris 10

    I have a Sun SPARC T2000 connected to a 2540 array.
    Originally I only installed a single channel FC HBA and connected it to tray 1 of the array. Today I've installed another FC HBA and connected it to the 2nd tray of the array. When I run format on my Solaris 10 data host I can see that there are now 2 entries for the same LUN.
    I've enabled multipathing by running the following command
    # stmsboot -D fp -e
    <reboot>
    After the reboot I still see two entries for the same LUN when I run format
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@780/pci@0/pci@9/scsi@0/sd@0,0
    1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@780/pci@0/pci@9/scsi@0/sd@1,0
    2. c2t0d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
    /pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@1/fp@0,0/ssd@w202400a0b85a1793,1f
    3. c3t2d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
    /pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w202500a0b85a1793,1f
    Specify disk (enter its number): ^D
    I was under the impression that I should only see one entry after enabling multipathing.
    Am I wrong?

    Further to my original posting.
    I've now created a few volumes and when I run format I'm presented with the following:
    AVAILABLE DISK SELECTIONS:
    0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@780/pci@0/pci@9/scsi@0/sd@0,0
    1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
    /pci@780/pci@0/pci@9/scsi@0/sd@1,0
    2. c2t0d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
    /pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@1/fp@0,0/ssd@w202400a0b85a1793,1f
    3. c3t2d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
    /pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w202500a0b85a1793,1f
    4. c4t600A0B80005A0C870000027C4905FD67d0 <SUN-LCSM100_F-0670 cyl 2558 alt 2 hd 64 sec 64>
    /scsi_vhci/ssd@g600a0b80005a0c870000027c4905fd67
    5. c4t600A0B80005A0C870000027D4905FED3d0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
    /scsi_vhci/ssd@g600a0b80005a0c870000027d4905fed3
    6. c4t600A0B80005A0C870000027E4905FFCBd0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
    /scsi_vhci/ssd@g600a0b80005a0c870000027e4905ffcb
    7. c4t600A0B80005A1793000002A14905FF3Cd0 <SUN-LCSM100_F-0670 cyl 33278 alt 2 hd 256 sec 64>
    /scsi_vhci/ssd@g600a0b80005a1793000002a14905ff3c
    8. c4t600A0B80005A1793000002A34905FFEEd0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
    /scsi_vhci/ssd@g600a0b80005a1793000002a34905ffee
    9. c4t600A0B80005A17930000029E4905FCDAd0 <SUN-LCSM100_F-0670 cyl 43518 alt 2 hd 256 sec 64>
    /scsi_vhci/ssd@g600a0b80005a17930000029e4905fcda
    I assume the c4's are my multipath volumes, but how on earth and I going to create slices and mount them with this sort of disk alias?

  • How To Enable Samba And SWAT In Solaris 10

    Link: http://bensweb.no-ip.info/ultrasparc/samba.htm
    This is a short and simple guide that I wrote for new Solaris users who want to get Samba and SWAT up and running quickly. (It works with SPARC and x86.) Enjoy!

    i try go to link http://bensweb.no-ip.info/ultrasparc/samba.htm but
    the result is not found ...The requested URL /ultrasparc/samba.htm was not found on this server.
    anyone..help me how to enable samba on solaris 10

  • How to enable FTP service in Solaris 10

    Hello, Everybody
    I installed my first Solaris 10 today, but I have a problem with FTP process, I found I could not ftp to my new server from other equipments. It seems that FTP service is disabled by default.
    Could you any guy tell me how to enable FTP in Solaris 10?
    Thanks in advance.
    -jason

    Since the OS is Solaris 10, how about using SMF's svcadm tool to enable/disable ftp service.
    eg.,
    # svcadm disable /network/ftp
    # ftp localhost
    ftp: connect to address 127.0.0.1: Connection refused
    Trying ::1...
    ftp: connect: Network is unreachable
    ftp> bye
    # svcadm enable /network/ftp
    # ftp localhost
    Connected to localhost.
    220 sunfire.anonymous.com FTP server ready.
    Name (localhost:giri): 331 Password required for giri.
    Password:

  • How to install a single 2Gb FC adapter with Solaris 10 SPARC ?.

    Hi All,
    I have the Sun Box runing Solaris 10 SPARC, i tried to install PCI single 2Gb FC adapter on this Server in order to connect to Sun Storage FC. At Ok prompt, i tried to run show-devs and looked the path /pci@1e,600000/SUNW,qlc@2 and supposed that physical installation for this adapter is ok.
    But i don't know whether Solaris 10 SPARC included the required drivers for this adapter already or not. Pls show me how to get correct drivers for this adapter and how to test to look if it's working properly under Solaris 10 SPARC ?.
    Thanks
    Scott

    Yes, it's part#X6767A supported for entry SPARC Sun Fire server Line.
    I tried to seach drivers via qlogic.com and it leads me to the sunsolve.com for the download but the download is required to login with a service plan from Sun. So sun wanted to charge for these patches/drivers.
    Do you know which site/link is free for Sun drivers in gerneral ?.
    Thanks
    Scott

  • How to enable the iscsi in Solaris 10

    Dear All,
    Kindly help me,How to enable the iscsi in solaris 10,That box already running in solaris 9,Now we installed solaris 10,In that solaris box separate iscsi card in there,How to enable the iscsi card to access the NAS storage.
    Kindly sent any related PDF document to "[email protected]"
    Thanks in advance,.
    Regards,
    Venkatachalam.M

    Kindly answer the above question please.
    Regards,
    Venkatachalam.M

  • Solaris 10 SPARC 11/06 - 08/07 How?

    How to update Solaris 10 SPARC 64-bit OS from 11/06 to 08/07
    Where to download update?
    I routinely apply Solaris 10 recommended Patch Clusters..Currently at 127111-03
    Any issues to be especially aware of??
    Thanks..

    You would have to burn (or create a jumpstart image) of the Solaris 10 8/07 release and then use the 'upgrade' option of the install program to get from the 11/06 to the 8/07 release, adding patches is not enough.
    .7/M.

  • How to configure Proxy server on Solaris 10 - SPARC

    Hi All
    Please guide on how to configure Proxy server on Solaris 10 - SPARC ?
    What tool should be used?

    Proxy configurations are most often done within the application software that needs that function and not necessarily done in the OS.   That permits you to make very specific settings and not just generic global settings that could conflict with other software.
    Can you tell us what research you have done on the topic? 
    For example, have you glanced through a Google search on "solaris web proxy" ?
    If you are hoping to use a specific web server application your forum post might be better placed in a forum space for that software instead of in a general OS forum space.   What application software will you be using?

  • How to configure to access internet on Solaris 10 SPARC

    Dear All,
    how to configure to access internet on Solaris 10 SPARC.
    Thanks and regards,
    Heng

    What you need is just an IP address on your network interface and configure dns in /etc/nsswitch.conf and /etc/resolv.conf.
    More details here : http://docs.oracle.com/cd/E23823_01/html/816-4554/index.html

  • How I can emulate Solaris 10 sparc on a Virtual Machine?

    Hi for all.
    Guys, I need to emulate an environment Solaris 10 in my job. We have an application that just run in this kind of environment. But, I found some problems when I try to install Solaris 10 Sparc on Virtual Box. I think that the problem is the type of architecture that are differents.
    So, someone knows a way to emulate Solaris 10 sparc architecture on a Virtual Machine. Doesn't matter the Virtual Machine application (Virtual Box, VMWare, etc..). Somebody Help me?

    HI Srini_Chavali
    I'm using the Solaris 10 u11.
    In fact, Virtual Box supports Solaris u6 and higher. I have an installation of Virtual Box running Solaris x86. But, the problem occurs when I try to create a Virtual machine to work with Solaris 10 Sparc architecture.
    The errors that appears on the screen are:
    "No bootable medium found! System Halted" and "FATAL: Could not read from the boot medium! System halted"
    This error occurs just with Architecture sparc.

  • How can I install new versions of Fifefox on Solaris 9 Sparc?

    I use Firefox 2.0.0.20 on Solaris 9 Sparc, but I couldn't install any verions of Firefox major version 3.
    There is a great site, http://www.sunfreeware.com/mozilla.html, that looks it has a possibles version compatibles whit my OS, but the links don`t work.
    Any suggestions?
    More detail about my OS:
    Solaris 9 9/05 HW s9s_u9wos_06b SPARC
    Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
    se is subject to license terms.
    Assembled 25 September 2006

    Hi,
    Please also see [http://unixpackages.com/packages/mozilla this] (from http://www.sunfreeware.com/). It looks like 2.0.0.23 is the last supported version for Solaris 9.

  • How to encapsulate virtual disk under veritas Storage Foundation 6.0 on Solaris 10 Sparc

    Hi all I'm trying to encapsulate a disk under Veritas SF 6.0 but the system return  the following 
    bash-3.2# vxdisk list
    DEVICE       TYPE            DISK         GROUP        STATUS
    c0d0s2       auto:ZFS        -            -            ZFS
    c0d1s2       auto:none       -            -            online invalid
    c0d2s2       auto:none       -            -            online invalid
    the computer is a virtual computer and when I try the etc/vx/bin/vxdisksetup -i c0d1 format=sliced command
    it send back the following message VxVM vxdisksetup ERROR V-5-2-43 c0d1: Invalid disk device for vxdisksetup.
    I need your help Community.

    Here is the text from the download site from 10.3.3 that applies to 10.3.0 as well:
    Note: This table includes links to WebLogic Server installers that include 32-bit JVMs for the platform
    in question, and links to WebLogic Server generic installers that can be used on any supported platform.
    To use WebLogic Server with 64-bit JVM's on Linux and Solaris or to use WLS on other supported
    platforms, use the WebLogic Server generic installer listed under "Additional Platforms". The generic
    installers do not include a JVM/JDK. For instructions on using the generic installers, see this document.
    So regardless whether the OS is 64bit or not, you need to select the installer on whether you are running WebLogic Server in a 32bit JVM or a 64bit JVM. If you run in a 32bit JVM, you can use the 32bit binary installer for Solaris that has a .bin extension. If you are going to run a 64bit JVM, then you need to download the "generic" .jar installer and separately download the supported 64bit JDK and follow the instructions similar to this, but for 10.3.0.
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14142/guimode.htm#BABGFAAF
    On edelivery.oracle.com, select Oracle Fusion Middleware, then Oracle® Application Server 10g Release 3 (10.1.3) Media Pack for Oracle Solaris on SPARC (64-bit)
    32bit native Solaris installer for 10.3.0 is Part Number V13618-01
    64bit generic installer for 10.3.0 is Part Number V13672-01

Maybe you are looking for