How to Enable firewall on Solaris 10 SPARC Machine?

Hi All,
I have installed Solaris 10 SPARC & by default the firewall is disabled.
Now i need to enable firewall?
Can i know how to enable firewall Solaris 10 SPARC Machine?
Also can i know how to open up specific TCP & UDP ports?

What exactly are you looking for? By default Solaris is a secure operating system, but can be tuned to be more or less secure. The link above on IP Filtering is one way to make a system more secure, and is can be used to set up a firewall.
-- Alan

Similar Messages

How to Enable Firewall in Solaris 10 SPARC

How to Enable Firewall in Solaris 10 SPARC

What exactly are you looking for? By default Solaris is a secure operating system, but can be tuned to be more or less secure. The link above on IP Filtering is one way to make a system more secure, and is can be used to set up a firewall.
-- Alan

How to turnoff firewall on solaris 10?

hey everybody,
do you know how to turn off the firewall on solaris 10 ?, because i installed 3 rd party program, and need to disable the firewall...
thank you so much, for your help

Hi,
Can you please let me know how to disable firewall on Solaris 9.
Does this command [*svcadm disable ipfilter*] disable firewall even on Solaris 9?
Please let me know.
TIA.
Regards,
Prashanth.

Installing RealTek ethernet card in solaris 7 sparc machine

I inserted RealTek ethernet card in my Solaris-7 Sparc machine. But to work it properly ,need to install driver for the card. I searched a lot but i did't get the driver to download . I have read from some sites that the driver for solaris 7 sparc is not avaliable.How can i solve this problem.?
Anybody please help me to solve the problem.

You can try a NIC driver from RealTek, directly.
http://www.realtek.com.tw/downloads/
... but for a SPARC system? That may be problematic.
Does OBP see the device? Use show-devs at the OK prompt.
If it isn't seen at OBP's elementary hardware level, the OS will never use it.
If it is recognized at OBP, then try the manufacturer's drivers.
Return to the forum and let the rest of us know what happens..

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

How to enable firewall

Hi,
i cant enable firewall in my mac pro. start button does not get highlighted. so i couldn't click it on there. so pls help me out on this...

Open System Preferences > Security
Select the Firewall tab.

Installing Database 11.2.0.1.0 on Solaris 9 SPARC machine.

Hi,
I am installing db using ade copydb and than running startme , I am getting this error continously.
ld.so.1: /ade_autofs/nfsdo_release_unix/RDBMS/11.2.0.1.0/SOLARIS.SPARC64/RELEASE/sqlplus/bin/sqlplus: fatal: libm.so.2: open failed: No such file or directory Killed
Please help me to get the DB 11.2.0.1 installed on Solaris 9 SPARC.
Thanks,
Edited by: 906748 on 09-Jan-2012 04:21

Hi;
You can use below version for 11gR2 which is already by Srini
The following operating system versions (or later) are required for Oracle Database 11g Release 2 (11.2):
Oracle Solaris 10 U6 (5.10-2008.10)
Starting with Oracle Database 11g Release 2 (11.2.0.3), Oracle Database is also supported on the following operating system versions (or later):
Oracle Solaris 11 11/11 SPARC
Oracle Solaris 11 11/11 X86
See also:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

How to enable multipathing on Solaris 10

I have a Sun SPARC T2000 connected to a 2540 array.
Originally I only installed a single channel FC HBA and connected it to tray 1 of the array. Today I've installed another FC HBA and connected it to the 2nd tray of the array. When I run format on my Solaris 10 data host I can see that there are now 2 entries for the same LUN.
I've enabled multipathing by running the following command
# stmsboot -D fp -e
<reboot>
After the reboot I still see two entries for the same LUN when I run format
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c2t0d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
/pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@1/fp@0,0/ssd@w202400a0b85a1793,1f
3. c3t2d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w202500a0b85a1793,1f
Specify disk (enter its number): ^D
I was under the impression that I should only see one entry after enabling multipathing.
Am I wrong?

Further to my original posting.
I've now created a few volumes and when I run format I'm presented with the following:
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@780/pci@0/pci@9/scsi@0/sd@1,0
2. c2t0d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
/pci@7c0/pci@0/pci@1/pci@0,2/SUNW,qlc@1/fp@0,0/ssd@w202400a0b85a1793,1f
3. c3t2d31 <SUN-UniversalXport-0670 cyl 8 alt 2 hd 64 sec 64>
/pci@7c0/pci@0/pci@9/SUNW,qlc@0/fp@0,0/ssd@w202500a0b85a1793,1f
4. c4t600A0B80005A0C870000027C4905FD67d0 <SUN-LCSM100_F-0670 cyl 2558 alt 2 hd 64 sec 64>
/scsi_vhci/ssd@g600a0b80005a0c870000027c4905fd67
5. c4t600A0B80005A0C870000027D4905FED3d0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
/scsi_vhci/ssd@g600a0b80005a0c870000027d4905fed3
6. c4t600A0B80005A0C870000027E4905FFCBd0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
/scsi_vhci/ssd@g600a0b80005a0c870000027e4905ffcb
7. c4t600A0B80005A1793000002A14905FF3Cd0 <SUN-LCSM100_F-0670 cyl 33278 alt 2 hd 256 sec 64>
/scsi_vhci/ssd@g600a0b80005a1793000002a14905ff3c
8. c4t600A0B80005A1793000002A34905FFEEd0 <SUN-LCSM100_F-0670 cyl 51198 alt 2 hd 64 sec 64>
/scsi_vhci/ssd@g600a0b80005a1793000002a34905ffee
9. c4t600A0B80005A17930000029E4905FCDAd0 <SUN-LCSM100_F-0670 cyl 43518 alt 2 hd 256 sec 64>
/scsi_vhci/ssd@g600a0b80005a17930000029e4905fcda
I assume the c4's are my multipath volumes, but how on earth and I going to create slices and mount them with this sort of disk alias?

Adobe Reader on a Solaris 10 SPARC machine

Hi,
Can anyone tell me if Adobe's Vulnerability ID: APSB11-03 is applicable to Reader 8.1.7. That is the version of Reader that is installed be default with the latest version of Solaris 10 for SPARC platforms.
Thanks.

Dear zata40,
No, Adobe Reader 8.1.7 for SPARC solaris is not affected by this security vulnerability, it is applicable to Win and Mac releases only.
Thanks,
Atanu Dhar
([email protected])

How To Enable Samba And SWAT In Solaris 10

Link: http://bensweb.no-ip.info/ultrasparc/samba.htm
This is a short and simple guide that I wrote for new Solaris users who want to get Samba and SWAT up and running quickly. (It works with SPARC and x86.) Enjoy!

i try go to link http://bensweb.no-ip.info/ultrasparc/samba.htm but
the result is not found ...The requested URL /ultrasparc/samba.htm was not found on this server.
anyone..help me how to enable samba on solaris 10

How to enable FTP service in Solaris 10

Hello, Everybody
I installed my first Solaris 10 today, but I have a problem with FTP process, I found I could not ftp to my new server from other equipments. It seems that FTP service is disabled by default.
Could you any guy tell me how to enable FTP in Solaris 10?
Thanks in advance.
-jason

Since the OS is Solaris 10, how about using SMF's svcadm tool to enable/disable ftp service.
eg.,
# svcadm disable /network/ftp
# ftp localhost
ftp: connect to address 127.0.0.1: Connection refused
Trying ::1...
ftp: connect: Network is unreachable
ftp> bye
# svcadm enable /network/ftp
# ftp localhost
Connected to localhost.
220 sunfire.anonymous.com FTP server ready.
Name (localhost:giri): 331 Password required for giri.
Password:

How to Enable Remote services using the GPO for the Client Machines

How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users remote as administrator

Hi,
If you use windows server 2003, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
Enable or disable Remote Desktop
http://technet.microsoft.com/en-us/library/cc727977(v=WS.10).aspx
If you use windows server 2008 and later version, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
How to Enable or Disable Remote Desktop via Group Policy Windows 2008
http://social.technet.microsoft.com/wiki/contents/articles/4980.how-to-enable-or-disable-remote-desktop-via-group-policy-windows-2008.aspx
After you enable
Allow users to connect remotely using Remote Desktop Services policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services.
So if you want users to access computer remotely, you need add users as members of the Remote Desktop Users group on the target computer.
About how to add users to the Remote Desktop Users group, please refer to the following link:
Configure the Remote Desktop Users Group
http://technet.microsoft.com/en-us/library/cc743161.aspx
Best Regards,
Erin

License for cross-compilation for solaris 10 sparc on Linux x86

I'd like to do cross-compilation for solaris 10 sparc on Linux x86 using gcc (for linux). To do that, I have to copy libraries (/lib/64) and includes (/usr/include) from a sparc machine to my linux machine.
The compilation will be run on about (up to) 50 Linux machines (by various developers). We also have 3 solaris-10-SPARC machines.
I wonder if Solaris license allows me to copy the includes and libs to perform compilation elsewhere.
I also checked "OTN License Agreement for Oracle Solaris", but it looks like Oracle allows for installing "the programs" on up to 3 machines, but I need it on 50.
Thanks for any suggestions or redirections to a proper place where I can get an answer.
Marek

When installing Solaris 10 01/06 on a Dell 1850 I receive an error message during the install saying "no disk found". I assume that the drive/controller is not recognized. The Dell 1850 is listed under the HCL for Solaris 10 10/06. I don't believe I can use the Solaris(TM) Device Driver for the LSI MegaRAID Adapter floppy with 1/06. I don�t have any other Solaris boxes up so I can�t build a jump start server. Any suggestions?

Forms 10g - Solaris 10 Sparc and Mozilla 1.7 - Error Applicatio/x-java-appl

This page contains information of a type ( Applicatio/x-java-applet-version=1.4.2_06) that can be viewed with the appropriate plug-in
I have an application running and on windows and its is working fine with IE. but when i try to run the application of sun solaris 10 sparc machine with Mozilla 1.7 i get this error.
What can be the reason and if any body has solved this issue ? please guide me .
URGENT

I wouldn't say you made a "mistake". It might be a custom build, but Firefox never had a 1.7 version; skipped from 1.5 to 2.0 in release version numbering.
The old Mozilla Application Suite had 1.7 as its' last version produced; ended with 1.7.13 in April 2006. That's why I equate "Mozilla web browser (1.7)" with the old Mozilla Suite and not with Firefox.
http://en.wikipedia.org/wiki/Mozilla_Application_Suite
Whatever the case, no one should be using a web browser that was produced back in 2006 on the internet in 2014. If that is used completely on an internal intranet, you shouldn't have a problem; beyond finding support for an old version like that.
http://www.seamonkey-project.org/community

How to install Apache Web Server with PHP on Sun Solaris Sparc machine

Hi,
We are trying to install the Apache Web Server and the PHP package on a Sun Solaris Sparc machine running on SunOS 5.8. We are having compilation problems with the source code of both these packages.
Does anybody know if there are ready solaris packages for Apache and PHP available from where we can download and install instead of source code compilation?
Or any instructions / things to watch for when installing Apache with PHP (if anybody has tried installing Apache with PHP on Sun Solaris earlier) is most welcome.
Thanks,
Harish

Apache should be bundled along with Solaris check in "/var/apache" in Solaris 8 and Solaris 9
php is available at www.php.net
I found an old document for installing PHP maybe this will help.
Cheers
-Dhruva
+++++++++++++++++++++++++++++++++++++++++++++++++++++++Installing PHP 3.x for Apache 1.x.x on Solaris
Introduction
This document describes how to install PHP for Apache on Solaris.
You should have Apache installed before trying to install PHP.
If you want to use PHP with MySQL then you must install MySQL first.
Before we Begin
1. These instructions assume that you have Apache installed according to instructions.
Getting PHP
1. You must be logged in as root to perform this installation.
su root
2. I save all my downloads in:
/usr/local/dist
If you don't already have one, you may need to create that directory now:
mkdir /usr/local/dist
3. You can get PHP 3.0.14 from here(www.php.net).
cd /usr/local/dist
ftp ftp.php.net
cd pub/distributions
bin
get php-3.0.14.tar.gz
bye
Installing PHP
1. We will install PHP in /usr/local/build, but use a tricky tar command
to do it in on hit from the download directory:
cd /usr/local/dist
tar xvfz php-3.0.12.tar.gz -C ../build
Compiling PHP
1. First let's get where the action is:
cd /usr/local/build/php-3.0.14
2. You now have 3 options:
* Simple PHP install without MySQL - goto step 3
* Simple PHP install with MySQL - goto step 4
* Custom PHP install - goto step 5
3. Simple PHP install without MySQL. Next, jump to step 6.
./configure --with-apache=../apache_1.3.12
4. Simple PHP install with MySQL. MySQL must be installed before you can configure PHP to use it. I recommend that MySQL should always be reachable with /usr/local/mysql. Even if you install it else where you
should create a symbolic link from /usr/local/mysql. Otherwise the compiler can have problems finding the mysqlclient library. The command
should look like this:
./configure with-mysql=/usr/local/mysql with-apache=../apache_1.3.12
Next, jump to step 6.
5. Custom PHP install. Take a look at the available configuration directives by using this command:
./configure --help
6. Now we can make the PHP executable. This may take a while.
make
7. Now we install the PHP module with:
make install
Adding the PHP Module to Apache
1. Now we have to setup Apache to include the PHP module:
cd ../apache_1.3.12
2. Re-configure Apache to use the PHP module. You should use your previous Apache configure command along with the PHP activate module directive.
You can see your previous Apache configure command by doing:
cat config.status
You can configure Apache using the previous command with the added PHP module by doing:
./config.status --activate-module=src/modules/php3/libphp3.a
If you used the simple Apache install from instructions the command will look like this:
./configure prefix=/usr/local/apache activate-module=src/modules/php3/libphp3.a
3. Make and install Apache with PHP enabled:
make
4. We need to stop the server before installing the files:
/usr/local/apache/bin/apachectl stop
5. Now we can install the new binaries:
make install
6. Start apache again (now running the new php enabled version):
/usr/local/apache/bin/apachectl start
Setting Up PHP
1. We have to tell Apache to pass certain file extensions to PHP. We do this in Apache's httpd.conf file.
cd /usr/local/apache/conf
2. Edit the httpd.conf file. If you do a search for php you will find a couple of commented out lines telling Apache to use the PHP module. You should uncomment them to look like this.
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
3. I prefer to use the extension .phtml, you can use whatever extension you like (even .html) by adding lines to httpd.conf like this:
AddType application/x-httpd-php3 .phtml
Check that it Works
1. We have to restart Apache to make these changes take effect on the running server.
cd /usr/local/apache/bin
./apachectl restart
2. Apache should now be running with PHP enabled. The server version should include PHP/3.0b2.
./apachectl status
Apache Server Status for dev.synop.com
Server Version: Apache/1.3.9 (Unix) PHP/3.0.12
Server Built: Oct 25 1999 00:37:07
3. Now it is time to test PHP with a page. The simplest thing to do is create a page called test.php3. My file is here. This file contains the
following text:
<?php phpinfo(); ?>
4. Point your browser at this file on the virtual host which you used:
http://localhost/test.php3

How to Enable firewall on Solaris 10 SPARC Machine?

Similar Messages

Maybe you are looking for