How to enable flash

Have downloaded latest flash player but setting shows as disabled. Cannot change to enabled so cannot view anything that needs this.

MSIE, see
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

Similar Messages

How to enable flash during video capture nokia n90...

Hi-
How can I turn on or enable flash during video capturing on Nokia n900? Is there a way because I tried to take videos at night and they were unvisible or dim. I know we can use flash while taking pictures!!
Thanks

if your camera settings is on automatic then the flash will be on while recording. that is how mine is set and it stays on.
everything happens for a reason
check out my blog @ http://mycellife.blogspot.com/

How to Enable Flash Content?

When opening a pdf document we recieve the attached Warning message. Is there a way to enable flash content for all documents? Or, is it recommended, for security, to allow flash on a per document basis? Is there a article explaning this. I would like to pass the article on the the users that are having trouble.
Thank you

Hi
Sure, without plugins enabled you'd have seen no flash at all, even the settings manager, not just the 3rd party error message,
Ok, so the check box won't check - I'd delete the file settings.sol which you oughtta find in
Home/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys/
or just trash everything inside the Home/Library/Preferences/Macromedia/ folder
do the above with browsers closed.
the default is to allow 3rd party access, so hopefully that'll fix it.
If it doesn't, check the permissions on the Macromedia folder - it should be Read & Write for your user name.
I think it'll be the main Macromedia folder, since experimenting here shows the box is checkable no matter what the access is for the settings.sol file; but making Home/Library/Preferences/Macromedia/ read only... stops the boxes from working.
Here's hoping eh

How to enable flash in windows 8

Adobe website says Firefox is installed. Works under Internet Explorer. But Firefox Options Plugins does not show either Flash or Shock. Trying an install bombs out with an error that it can't find entry point in a Windows system file. How do I get Firefox to see that Flash is already in Windows 8?

Adobe has different installers for IE and Firefox, because IE takes an ActiveX control and Firefox takes a plugin. You might need the second installer if you have never run it before.
http://get.adobe.com/flashplayer/
Visit using Firefox and make sure to uncheck any unwanted extras.
After the installer downloads, you will need to run it. If that's where the problem is, you can try the "offline" installer that doesn't need to connect back to Adobe for more files and see whether that works better:
https://www.adobe.com/products/flashplayer/distribution3.html
Choose one of the downloads for "Plugin-based browsers".
Any luck?

How to enable Flash CS4 to accept SHIFT INSERT instead of CTRL V? (BUG!!!)

This drives me mad... And just can't understand why Adobe has not corrected this very basic bug since ages. So, the thing is Windows users tend to love, GOT USED TO using CTRL+INSERT and SHIFT+INSERT for copy and paste operations.
Yyyeeas I know, that under Keyboard shortcuts I can define my own shortcuts, but the real problem is, that even after the Shortcut manager eats shift insert as a paste hotkey, it just fails to function.
CTRL INSERT works like a charm, but SHIFT INSERT as Paste DOES NOT.
AAARRRGGHHH. ADOBE PLEASE CORRECT THIS ERROR TO ALLEVIATE THE PAIN!
PS: And please make a usable flash code editor in the next Flash release. Thanks. Like normal line copying and inserting would be welcome. Check PHPEd, Ultraedit and other common editors for behaviour patterns...

Well, after months of trying to get Adobe to take this issue seriously I have finally got this reply from Tech Support:
Peter, let me inform you that, Bug Number for the issue that you are facing is "Bug# 2193890".
Peter, as per my interaction with senior Technical Department let me provide you the important information, this bug is not going to be worked upon by our Engineering team because, According to Adobe Technical Support policy, we cannot work on a bug if we do not recieve certain specified number of complaints from customer's.
As this issue is encountered by only very few customer's, hence this bug will not be fixed by pur Engineering team.
So can I suggest that anyone who is driven mad by this 'bug' (actually a fundamental oversight in the very basic programming of the interface) contacts Adobe support, referring to Bug# 2193890 (and maybe my Case #181518116).
After all, how hard is it to trap some key combinations?

How to enable Flash asecurity Settings programmatically

Hi,
I am doing an application where I am converting Text to Speech sing google translator.
When i run the standalone swf or html it throws errors for enabling secury settings(local to network).
If I go to adobe security settings and give the location of the file its working fine.
But I do not want to do that every time if a create a new file.So can I add it programatically in the Source code.
Is there a way to convert Text to Speech without using google translator so that i can check it offline.
Thanks.

No, that would be security risk. This is a way of protecting user against malicious programmer so I don't believe there's an option for malicious programmer to disable it.
However, if you - as a developer, want to enable all your applications by default, you should ad your projects folder to the trusted locations. This way every *.swf file you run from this folder (and any of its child folders), will be considered trusted.
1) run your *.swf
2) rightclick for flashplayer context menu
3) click Global settings
4) click Advanced tab
5) click Trusted Location Settings button
6) click Add button
7) click Add folder button
There you go.

Can someone Please tell me how to enable adobe flash

I am about to lose my mind! I just got a nook like 3 weeks ago and I can't figure out how to enable my adobe flash player. So I've been having a really hard time trying to watch videos on youtube. Will some kind soul help me out and write back to me telling me how to enable it Please?

Nook is an e-ink book reader, and I doubt the device will support things like Flash Player. I have no idea how they could make that work with an e-ink display.
It's designed to be a device to read ebooks, not a device to surf the internet. Additionally, it runs the Android Operating System and Adobe stopped ALL development of Flash for Android in July of 2012.

Firefox will not allow Flash player to work. How do I enable Flash to work in Firefox? Thank you.

Question
Firefox will not allow Flash player to work. Every site that uses Flash player gives me a message saying that I need to update to the latest version of Flash player, but I have done so, and I keep getting the same message. How do I enable Flash to work in Firefox? Thank you.

You can hold down the Shift key and double click the Firefox desktop icon to start Firefox in [[Safe mode]].

Amost every page I open, Firefox asks whether to enable Flash player. How to get rid of this nagging pest ?

Amost every page I open, Firefox takes a line off my netbook screen to ask whether to enable Flash player.
How to get rid of this nagging pest ?

downloaded 17MB flash installer from Adobe website.
This download did not run properly, reporting that it had some error.
Still plagued with FireFox queries about Flash.
Don't much care about having flash plugin in FireFox.
Prefer to download a flash file, scan with virus checker, then play it with VideoLAN.
So I disabled Flash plugin to "Never Ask" but still the noxious popup
"FireFox has prevented the outdated plugin "Adobe Flash" from running on helpx.adobe.com. Continue Blocking ? Allow ... X"

How do I enable Flash in QT7???

I followed the directions in the Help program, but there is no Enable Flash button to click/unclick...wth

Your only options would be a purchase of an external Firewire hard drive and an older version of Apple OS X.
I have two externals that allow me to boot in various OS's and keep one at 10.3.9 another at 10.4.11. I also have OS 9 (very old) 10.2.8 and 10.5.1 so I can mix and match older software.

How do i enable flash support

I want to watch a webpage that uses flash. When i go to it. It tells me i need to install flash 9.0 or later. But i already have flash and the stock browser can handle it.
The webpage is www.svtplay.se

Current versions of Fennec (Firefox for Maemo) have Flash disabled by default because it causes problems on many pages. We're working on fixing this for Fennec 2.0 so we can enable Flash on all pages.
The "YouTube Enabler" add-on for Fennec 1.1 enables Flash just on youtube.com, where it is known not to cause serious problems:
https://addons.mozilla.org/en-US/mobile/addon/67650
To enable Flash on all sites in Fennec for Maemo (not recomended): Enter "about:config" in the address bar, search for "plugin," and change the "plugin.disable" to "false."
(Firefox for Android does not yet support Flash; we hope to work with Adobe to add Flash support on Android in a future release.)

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

How to enable Channel 13 on WET54g

I am using it in Europe and need to enable channel 13 so I can connect to a network on this channel. I vaguely remember being told this was done by accessing a hidden setup page. Can anyone tell me how to enable channel 13 on a WET54g V3.1?

perita wrote:
Thanks for your reply.
>> Generally, devices bought in the U.S. can only be used in the U.S.
This seems to me like poor and outdated policy. It reminds of times when you could not take a laptop to Europe because the power supply was only for 110 V. Most manufacturers have moved to simplifying things for the customer and for themselves by making models more universal.
>> Flashing other firmware may brick the device. You can never rule that out.
>> Flashing European firmware should not cause problems.
>> Possibly it won't accept it but usually hardware versions between countries are identical.
You say it should "not cause problems" but "may brick the device". I would consider a bricking the device to be a "problem". I guess I can interpret it to mean that damage is unlikely but possible. It gives me pause as I do not want to risk bricking it.
The device label says it is WET54g V 3.1 At the US site http://homesupport.cisco.com/en-us/support/bridges/WET54G the choice for hardware version only goes up to V 3.0. Puzzling.
At the European site http://homesupport.cisco.com/en-eu/support/bridges/WET54G/download I found support for version 3.1. Interesting and puzzling since my 3.1 is American.
There, in the EU site, I found a file named WET54Gv3_1_v2d16.zip which contains two files:
- wet54gv3_v2d16_us_20091027.img
- wet54gv3_v2d16_ce_20091027.img
There is no explanation in the release notes of which one to use. The names differ only in two characters: us/ce. I would assume "us" is for USA but what would "ce" be? I was expecting something like "uk" or "eu". I am guessing the ce version is for Europe but I want to be sure before I start messing. I have never flashed anything and I have no idea of the degree of risk involved.
You can reload it with this firmware wet54gv3_v2d16_ce_20091027.img.

Enable Flash Player in Mozilla Fire Fox without Admin Rights

Hi,
I am from australia i have a question how do i enable flash player in my system without admin rights. at present there is no access to install software to my system. please help thanks in advance
Regards
John Burns

Hi John,
Admin rights are required for installing Flash Player because it installs to a system-wide location which requires elevated permissions to write to. Due to this, there is no way to install Flash Player without having Admin rights. Since it writes to a system-wide location, any user on the machine with Admin rights can install Flash Player.
Maria

How to install flash player with safari 7 and OSX Mavericks

flash 13 refuses to install on brand new imac with Mavericks and Safari. Any ideas on how to get Flash installed would be much appreciated

1. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
Best.

How to enable flash

Similar Messages

Maybe you are looking for