How to enable Google Mail on the N9

So I want to turn on the Mail application with my google account. I click on the create account, select google, add my credentials and it says it's being successful. I can turn on google talk and it works without issues. However, the Mail app just continues to ask me for my password, tells me it's wrong (it's not wrong) and doesn't fetch any mail. Where is the problem and how do you fix it?

Try this.
But make sure what you want to do with your contacts. If you want to sync your gmail contacts to your phone and choose the mail data to remain it will delete your phone contacts. But if you select phone contacts to keep, it will update the data in the gmail.
To configure the Mail for Exchange application for Google Sync, follow these steps:
Open the MfE folder on your phone and start the Mail for Exchange application.
Select Yes when prompted to create a new Sync profile.
Configure the profile with the following settings:
* Connection
Exchange Server: m.google.com
Secure Connection: Yes
Access Point: your carrier's Internet access point
Sync while roaming: your preferred setting
Use default port: Yes
* Credentials
Username: Your full Google email address, e.g. [email protected]
Password: Your Google Account password. (If you're a 2-step verification user, please use an application-specific password instead.)
Domain: leave empty
* Sync schedule
Decide when you want synchronization to happen. Leaving this Always On will ensure your data is always current, but will also consume more battery than other settings.
* Calendar
Synchronize Calendar: Enable or disable
Sync Calendar back: your preference
Initial Sync: Decide if you want to keep existing Calendar events on your phone or replace them all with events synced from Google Calendar.
* Tasks
Synchronize Tasks: No (currently not supported by Google Sync)
* Contacts
Synchronize Contacts: Enable or Disable
Initial Sync: Decide if you want to keep existing Contacts on your phone or replace them all with contacts synced from Google.
* E-mail
Synchronize Email: Enable or Disable
E-mail address (default based on profile)
Show new mail popup (yes/no)
Use signature (default to no)
Signature
When sending mail (default: send immediately; alternative is send at next sync only)
Sync messages back (default: 3 days; alternatives are 1 day, 1 week, 2 weeks, 1 month, all messages)
if it helps, accept as a solution and hit the star.
Owned Nokia 5110, Nokia 8210, Nokia 8250, Nokia 6610, Nokia 6820, Nokia 9500, Nokia E50, Nokia 8800 , Nokia E71, Nokia N91 4 GB, Nokia N95, Nokia N95 8GB, Nokia N97, iPhone 3GS & finally Nokia N900,Nokia X6, Nokia E55, BB BOLD 9700, iphone 4, Nokia N8; BB Pearl 9100, HTC Legend, & Now Nokia N9. (N900 is the Best)

Similar Messages

  • How to enable push mail for gmail in iphone 6 plus

    how to enable push mail for gmail in iphone 6 plus

    Tommacgr wrote:
    You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
    You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

  • TS3276 How do I reconfigure Mail to the new settings required by Verizon? If I don't comply by Sept. 2013, my mail service will be interrupted.  The following is the message that I received from Verizon:

    How do I reconfigure Mail to the new settings required by Verizon. If I don't comply by Sept. 2013, my mail service will be interrupted.
    The following is the message that I received from Verizon:
    Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
    Server                    Current Setting                  New Setting                  SSL Enabled               Port
    POP3 Server       incoming.verizon.net           pop.verizon.net                       YES                   995
    SMTP Server        outgoing.verizon.net         smtp.verizon.net                      YES                   465
    TIPS: Depending on your email application, you may need to turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to restart your device for these new settings to take effect and for your email to continue working properly.

    On 10.7 (most any other versions should be similar) Mail > Preferences > Accounts > select account > Account Information, and confirm that the Account Type at the top is POP. 
    If it's currently working and is shown as an IMAP account, then please stop now, and reply back here with that detail.
    If the account is shown as a POP account, then update the incoming (receive-path) mail server to match Verizon's message if your current settings show a different mail server, then select the Advanced tab to set the port and to enable SSL, and also ensure that the Authentication setting has "Password" selected... 
    Now for the outbound (SMTP) path...  Back over to the Mail > Preferences > Accounts > select account > Account Information tab, and switch the Outgoing Mail Server (SMTP) selector to "Edit SMTP Server List" item to get to the "outbound" mail settings and select the Verizon SMTP server account from the list shown at the top and select the Account Information tab and ensure that the server name matches what Verizon has now specified, and then select the Advanced tab, select Use Default Ports and check the Use Secure Sockets Layer box.  

  • I have 2 iphones and a macbook on one mobile me account.  How can I keep mail in the macbook and one iphone private from the other iphone?

    I have an iPhone 3G, an iPhone 3GS, and a MacBook on one macmail and mobile me account.  How can I keep mail on the MacBook and iPhone 3 private from the iPhone 3GS?

    Pretty much. I don't understand why you need to worry about MobileMe, though. I'd guess the vast majority of us with iDevices don't have MobileMe accounts at all. That's pretty much why it failed.

  • How do I access mail in the Cloud? some emails are not on the iMac because I opened them on the iPad. How do I download then to the iMac?

    How do I access mail through the cloud that is on my iPad but not pushed to the iMac?

    There is a forum for iCloud on my Mac, I would recommend posting there or iCloud on IOS devices forum.

  • How to enable Print Preview with the Envy 5530

    How to enable Print Preview on the Envy 5530

    Hi,
    A print preview is not offered by the current HP software as older software versions provided.
    A preview is only available if the application you are printing from include a such, it is not provided by the printer driver itself.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to send external mails to the user

    Dears,
    How to send external mails to the user who creates the sales document (Quotation)
    Can you please suggest what modification required in the FM
    Thanks,
    pinky

    You can have a partner function like 'Created by' and use an exit to populate the User ID to this partner function(dont have the system right now but i think this can be done with standard partner detr. procedure also)
    Then, create an Output type for that Partner function with transmission medium as 'External Send'. You can use the standard SAP program to trigger the email. To send the actual email after the output is trigerred, the link connection has to be set up be BASIS but if you want to check, then goto SOST and see if the email got trigerred or not.

  • HT4623 How to make Google Maps as the default Map App in my iPhone 5

    How to make Google Maps as the default Map App in my iPhone 5, so that I could still use the old bookmarks and use the pins to drop, Please assist.

    You cannot make Google Maps the default mapping app.

  • How to download ALL MAIL from the server in a Mail app ?

    How to download ALL MAIL from the server in a Mail app ? I want all the mail messages, sent, received ON my computer... Thanks much !!!!!!!

    In Mail's Accounts/Mailbox Behavior preference pane make sure these 4 checkboxes are NOT checked:
    OT

  • How do you quit mail when the  'quit mail' is not illuminated

    how do you quit mail when the 'quit mail' is not illuminated

    Command ⌘ + Q, or if that doesn't work, force quit by pressing Command ⌘ + option + esc, selecting Mail, and then Force Quit.

  • I can't find a preference to keep mail on the server as it's deleted on individual devices. We have 4 Mac devices and a PC running W8 with the iCloud control panel. How can we keepthe mail on the server as it is deleted from the individual devices?

    How do I keep mail on the server as it is deleted on individaul devices? We have 4 Apple devices and a W8 laptop. We sort and read mail on all of them, but have found that deleting mail on one deletes it on all of them.

    Yahoo and Gmail both support POP if you wish.
    All modern email systems are Imap (because it supports multiple and mobile devices)
    I do not recommend POP under any circumstances, it can not be synchronized so unless you do not use Mobile devices at all (iPhones etc) it is useless.
    Yahoo users (search this site) have endless problems and Gmail is highly non-standard. Expect a learning curve for that one.
    Are you short of server space, why do you need to do this rather retrograde step?

  • How can you delete the automatic drop-down address in Google mail on the iPad2??

    I want to delete an e-mail address that automatically  pops up when I send from Google mail.  How can I do this? Thanks!

    Use these steps to remove saved (form) data from a drop down list:
    #Click the (empty) input field on the web page to open the drop down list
    #Highlight an entry in the drop down list
    #Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries

  • How to save e-mails on the hard drive

    How to save my e-mails on the memory of my MacBook Air ?

    If you are using a POP account (and it sounds like you are) follow these insructions to keep a copy of mail on the server as well as locally.
    Click on the Mail menu and choose Preferences,
    Click on the Accounts icon, and select your email account on the left side,
    Go to the tab called Advanced, and change the settings of the checkbox called Remove copy from server after retrieving a message:
    if that checkbox is UNchecked, then all your messages will always stay on the server
    if that checkbox is checked, then the messages will only stay on the server as long as specified in the drop-down box underneath
    if that checkbox is checked and the drop-down box is set to Right Away, then your account will behave as a regular POP3 account (the messages will be downloaded to your computer and then removed from the server right away)
    Click OK to confirm

  • How to send a mail to the user when a job gets canceled?

    Hi experts,
                      I need to send a mail when a job gets canceled to the user.I know the FM for sending mail and i can find if a job is canceled from tbtco,but i want to know how to send the mail from the same program ,once it got canceled ?
    thanks in advance,
    helpful answers will be awarded with points
    regards,
    ashwin

    Hi Ashwin
    Use the below peace of code:
    REPORT ZBCJOBMONITOR .
    TABLES: SOMLREC90,
            TBTCO.
    DATA: MAILDATA   LIKE SODOCCHGI1.
    DATA: MAILTXT    LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
    DATA: MAILREC    LIKE SOMLREC90 OCCURS 0  WITH HEADER LINE.
    DATA: I_TBTCO    LIKE TBTCO OCCURS 0 WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
    SELECT-OPTIONS: S_JOB FOR TBTCO-JOBNAME.
    SELECT-OPTIONS: S_JOBC FOR TBTCO-JOBClass.
    SELECT-OPTIONS: S_REC FOR SOMLREC90-RECEIVER.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      CLEAR:    MAILDATA, MAILTXT, MAILREC, I_TBTCO.
      REFRESH:  MAILTXT, MAILREC, I_TBTCO.
      PERFORM GET_ABENDED_JOBS.
      PERFORM BUILD_RECEIVERS.
      LOOP AT I_TBTCO.
        PERFORM BUILD_TEXT_MESSAGE.
        PERFORM SEND_MAIL_NODIALOG..
      ENDLOOP.
         Form  BUILD_TEXT_MESSAGE
    FORM GET_ABENDED_JOBS.
      SELECT * FROM TBTCO
              INTO CORRESPONDING FIELDS OF TABLE I_TBTCO
                         WHERE JOBNAME IN S_JOB
                           AND STATUS = 'A'
                           AND JOBCLASS IN S_JOBC
                           AND SDLSTRTDT = SY-DATUM.
    ENDFORM.
         Form  BUILD_TEXT_MESSAGE
    FORM BUILD_TEXT_MESSAGE.
      DATA: DATE(10) TYPE C.
      DATA: TIME(10) TYPE C.
      MAILDATA-OBJ_NAME = 'MONITOR'.
      MAILDATA-OBJ_DESCR = 'Batch Job Monitor'.
      MAILDATA-OBJ_LANGU = SY-LANGU.
      CONCATENATE 'Job Name:' I_TBTCO-JOBNAME
                  INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      PERFORM FORMAT_DATE USING I_TBTCO-SDLSTRTDT
                                DATE.
      CONCATENATE I_TBTCO-SDLSTRTTM+0(2) ':'
                  I_TBTCO-SDLSTRTTM+2(2) ':'
                  I_TBTCO-SDLSTRTTM+4(2)
                     INTO TIME.
      CONCATENATE 'Start Date/Time:' DATE TIME
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      CONCATENATE 'Job Class:' I_TBTCO-JOBCLASS
                INTO MAILTXT-LINE SEPARATED BY SPACE.
      APPEND MAILTXT.
      MAILTXT-LINE = 'Job has terminated abnormally'.
      APPEND MAILTXT.
    ENDFORM.
         Form  BUILD_RECEIVERS
    FORM BUILD_RECEIVERS.
      LOOP AT S_REC.
        CLEAR MAILREC.
        MAILREC-RECEIVER = S_REC-LOW.
        MAILREC-REC_TYPE  = 'U'.
        APPEND MAILREC.
      ENDLOOP.
    ENDFORM.
         Form  SEND_MAIL_NODIALOG
    FORM SEND_MAIL_NODIALOG.
      CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
           EXPORTING
                DOCUMENT_DATA              = MAILDATA
                DOCUMENT_TYPE              = 'RAW'
                PUT_IN_OUTBOX              = 'X'
           TABLES
                OBJECT_HEADER              = MAILTXT
                OBJECT_CONTENT             = MAILTXT
                RECEIVERS                  = MAILREC
           EXCEPTIONS
                TOO_MANY_RECEIVERS         = 1
                DOCUMENT_NOT_SENT          = 2
                DOCUMENT_TYPE_NOT_EXIST    = 3
                OPERATION_NO_AUTHORIZATION = 4
                PARAMETER_ERROR            = 5
                X_ERROR                    = 6
                ENQUEUE_ERROR              = 7
                OTHERS                     = 8.
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.
         Form FORMAT_DATE
    FORM FORMAT_DATE USING IN
                           OUT.
      CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
           EXPORTING
                DATE_INTERNAL            = IN
           IMPORTING
                DATE_EXTERNAL            = OUT
           EXCEPTIONS
                DATE_INTERNAL_IS_INVALID = 1
                OTHERS                   = 2.
    ENDFORM.
    Regards,
    Sree

  • How to generate a mail into the SAP Inbox

    Hi everyone,
    I have an MM Workflow that is starting correctly and a mail is supposed to be generated in the user Inbox in SAP after the completion of a material enhancement but it does not. The Workflow was copied from another system and it was working fine.
    I tried to see any event (step) that is sending a mail in the Workflow and I found only 1 but it seem correctly configured from what I can see. I am not even sure this is the right event that I am looking at.
    Does anyone have an idea of what I should look for and how I could manage to see why no mail is generated?
    I am still a beginner in Workflow so try to give me as much detail as possible.
    Thank you in advance for your answers.
    Best regards,
    Sylvain

    Hi Sylvain,
    The issue could be at many places.
    Check the workflow step that needs to send the mail to the desired user.
    Check if the agent who needs to recieve the mail is pesent in the current system. If the user is not hard-coded, check how the user is getting fetched in the step. If it is through rules, etc you need to debug the same.
    Also check the authorizations of the user in SU01. Check the agent assignment for the task as well.
    You can find much information in the workflow  log to start with the debugging.
    Hope this helps!
    Regards,
    Saumya

Maybe you are looking for

  • Storing PDF file in SAP?

    Hello Friends, I have one requirement. I need to display the PDF file as soon as user click on the push button. For that I need to store this PDF file in SAP. I have that PDF file in my PC . Could you pls let me know is there any ways to store the PD

  • Have a problem in Formatting output with Escape Sequence

    class Welcome      public static void main(String args[])           //Khong the hieu noi           System.out.println("Welcome\tto the world of java");           System.out.println("Happy\tBirthday");           System.out.println("Welcome\" to the wo

  • Report Writer / Report Painter Export to Excel Spreadsheet

    Hello Experts, I have created a report writer report with variation (can be seen on the left hand of the screen after execution of the report). Now, if i try to export the report to a spreadsheet, it just gives me the information without including th

  • How to handle transaction exception

    Hi, I am using jdev 11g. I need to catch the exception in my transaction like (table not found, column must not be null, column not found, ...) hereunder is my code.   public void saveOsaUser(OsaUser osaUser) throws Exception {     EntityManager em =

  • Can't get images to Bridge. It's useless.

    I've 2 training book's images on hard drive which are supposed to show up in Bridge. They don't. "Folders" has no OPEN command to get them there, Favorites is therefore empty, and so is content. The Main page opens all. So, why Bridge? The work area