How to enable hardware-assisted virtualization on a Pavilion dv4 1135ee

How to enable hardware-assisted virtualization on a Pavilion dv4 1135ee
My biaos are not supported is any option to enable vitrualization???????????????????

Have you installed the latest BIOS?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84257-1&cc=us&dlc=en&lc=en&...
These fix a battery charging issue and have several other important fixes from previous updates rolled in. However, the real problem you will face is that the P7350 processor standard in that machine does not support virtualization.
http://ark.intel.com/products/36750/Intel-Core2-Duo-Processor-P7350-%283M-Cache-2_00-GHz-1066-MHz-FS...

Similar Messages

How to Enable Hardware Acceleration in FireFox 31

Please advise how to enable hardware acceleration in FireFox 31. All my graphics and other hardware/software is current and updated. I've also paired my Bookmark Toolbar down to under 20 entries.
FireFox is so sluggish that just a few open tabs cause the pausing "wheel of doom" every time I try to enter information or go to another part of the website. Sometimes the pauses are 5-10 seconds, sometimes a minute or more.
I do not have this issue on the other browsers that I use.
Thank you in advance for your help!

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

How to enable Hardware Virtualization in my HP Pavilion dv6-6158nr notebook?

i am using HP Pavilion dv6-6158nr notebook and it supports hardware virtualization but when i run a virtual machine it gives me a message to turn on hardware virtualization but when I go to BIOS to turn it on there is no option of hardware virtualization in it now please tell me how to I enable hardware virtualization so that I keep enjoying running virtual machines thanks

Hi,
Please refer to this:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/HP-Pavilion-dv6-enabling-VT-x-in-BIOS/td-p/...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to enable hardware virtualisation support?

Today I upgraded to mac os x lion and when I open parallels desktop it asks me to enable hardware virtualisation support on my MacBook pro so that I can run windows xp as a virtual machine. I have searched the net and cannot find a way to access the bios to enable this feature, please could I have some support and advise on how to enable the VT. I did have any problems whilst I was on os x snow leopard and parallels used to work fine.
Thanks in advance.

Boot camp is the way to go then you will be able to turn it on. Run boot camp install windows xp and you be able to get into the bios
Here's some other help full info as well
VMware Fusion 3.1.3 was designed for OS X 10.6 (Snow Leopard) but is compatible with Mac OS X 10.7 (Lion), with the reservations listed below. If you are running an older versions of VMware Fusion, upgrade to VMware Fusion 3.1.3 before upgrading to Lion. Fusion 2.x is incompatible with Lion. For the best experience, reinstall Fusion after upgrading to Lion. When running Fusion on Lion, these limitations are known to exist:
The Migration Assistant, included with VMware Fusion, is not compatible with Mac OS X Lion. This is due to a change in file sharing components.
VMware recommends that a Snow Leopard-based Mac be used to migrate an existing PC. The resulting virtual machine can then be used in Fusion running on Lion.
Boot Camp partitions are not accessible through Fusion after upgrading to Lion.
To work around this issue, delete the Boot Camp virtual machine from the library and recreate it. For more information, see A Boot Camp virtual machine fails to power on with a disk error (1003483).
Minor visual issues have been reported when using Mission Control with Unity mode.
Mac OS X 10.7 (Lion) Client and Server cannot be run as guests, at this time.
VMware can provide best effort support if you choose to upgrade to Lion, but we cannot guarantee a resolution for all issues.
To be alerted when this article is updated, click Subscribe to Document in the Actions box.

How to enable hardware acceleration in desktop Adobe AIR app

Hello,
As the author of this post How do I enable hardware acceleration in an air exe? , I am trying to enable hardware acceleration inside my AIR application
If the user has disabled hardware acceleration in his flash player's settings, context3d.driverInfo will say "Hw_disabled=userDisabled"
His only way to re-enable it is to open Internet Explorer or Firefox and right click on a flash content, then check "Enable hardware acceleration"
I (we) would like to be allowed to re-enable it directly inside the AIR app (via actionscript code) and not telling the user to open a browser and check some random checkboxes (cause you know it's not very user-friendly...)
A bug has been opened here Bug#3843535 - Disabling Hardware Acceleration in IE flash plugin disables it in AIR EXEs and is marked as fixed but nothing is fixed : there's still no way to enable hardware acceleration in desktop AIR application
Thanks

Hello,
I pushed to get this bug fixed and was under the impression that we addressed this back in v16. Can you share a sample app so I can have our team take a look?
Thanks,
Chris

Qosmio G50-136 - How to enable Hardware virtualisation

Hi,
I have a Qosmio G50-136 with an Intel Core 2 Duo P8600 that is said to be YES to intel virtualization technology (VT-x) by intel itself ( [intel|http://ark.intel.com/products/35568/Intel-Core2-Duo-Processor-P8600-3M-Cache-2_40-GHz-1066-MHz-FSB] ).
My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
So is there a way to enable it ? I'd like to run mac os x 64 bits in vmware workstation.

> My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
.and did you check the BIOS settings?
From my knowledge the VT can be enabled and disabled only in BIOS.
If such settings is missing or not supported, you will not be able to enable/disable VT

Finaly. How to enable hardware acceleration for X-

After much discussion on this form and with my friends, I've finally cracked hardware acceleration for X-FI on Vista. It works by using Alchemy on a large scale and gives acceleration for everything you listen to. The breakthrough finally came through thanx to help and info I received from alexs3ds on this thread?http://forums.creative.com/creativel...message.id=645?It started as an emulation concept discussion and evolved in to this. It gives all your 3D audio effects and EAX in games without game by game transmutation and I have noticed a large quality and volume enhancement in normal music and film audio because even that is now accelerated. Here's a step by step guide on how to do it.[color="#ff0033">?[color="#3366ff">Download Alchemy and install. Get it here .[color="#3366ff">http://preview.creativelabs.com/alchemy/default.aspx[color="#3366ff">?[color="#3366ff">Open a?window in explorer and go to [color="#3333ff">Windows\System32.[color="#3366ff">?[color="#3366ff">Locate the file dsound.dll and right click on it then select properties.[color="#3366ff">?[color="#3366ff">Click the security tab then click advanced.[color="#3366ff">?[color="#3366ff">In the advanced security panel?that opens up, click the owner tab then edit.[color="#3366ff">?[color="#3366ff">Use this to set your user account name as owner. Use the other users and groups button if you can't see your account name select your user account name using the select users pane and add it. Make sure your user account name is set as owner.[color="#3366ff">?[color="#3366ff">Next you want to change permissions in the advanced security panel so you would click the permissions tab, click edit, on the panel that pops up click add and add your user account name. On permission entry panel, click full control under the allow line. Then ok everything and close every thing down till your back at the explorer.[color="#3366ff">?[color="#3366ff">Now rename dsound.dll to something like dsound.dll.bak. ( changing owner and permissions allows you to do this ).[color="#3366ff">?[color="#3366ff">Open up another explorer window and navigate to the Alchemy directory ie C:\program files\alchemy, highlight the dsound.dll file and the dsound.ini file and copy them.[color="#3366ff">?[color="#3366ff">Paste them into the system32 folder and that's it. Reboot your computer and you are now using hardware accelerated sound. ?[color="#ff0033">IMPORTANT NOTES YOU MUST KNOW[color="#ff0033">?This only supports 6-Bit samples. You can't use 24-Bit audio samples. You can however reverse the process and regain support. The Alchemy drivers can cause a bit of choppy sound now and then if you don't configure them right. See the Alchemy advanced FAQ for info. Plus, remember they are Beta. You can however update your system as and when alchemy updates. It's not known if every game will work with EAX or 3Dsound with this. To my knowledge?all, if not?most do.You can still edit and add game settings to the dsound.ini file. For help and info in getting the best quality out of your X-FI and a list of what XP software you can install off your driver disk that came with your card refer to this thread. http://forums.creative.com/creativel...essage.id=6029?Enjoy. Edit:- IMPORTANT UPDATE?This will only work if your card is set in game mode. It will not work properly in any other mode. See my post further down this thread for more details.Also important is that I have only been able to test this on Vista 32 ultimate. It is untested in any other version of Vista. Perhaps people who have it running on other versions of Vista could post this info and help put together a list. ?
Message Edited by Sensi on 05-09-200705:20 AM
Message Edited by Sensi on 05-09-200705:20 AM

It does work, however I discovered more?important conditions. You MUST have your audio card in game mode BEFORE you do this. The reason is that the alchemy file passes the audio to OpenAL in game mode only. IF YOU TRY TO RUN GAMES IN ANY OTHER MODE YOUR SYSTEM WILL CRASH WITH BSD. IF YOU TRY TO RUN MEDIA PLAYER IT WILL HANG. IF YOU RUN DIRECTX DIAGNOSTIC YOUR SYSTEM WILL CRASH WITH BSD. YOUR?CARD MUST BE IN GAME MODE. IF YOU TRY TO CHANGE TO GAME MODE AFTER THE SWITCH, YOU WILL NOT BE ABLE TO AS THE AUDIO PANEL WON'T LOAD. DO IT BEFORE YOU SWITCH. As for windows replacing files after reboot, that aint happening to me. I've looked everywhere and can't find any sign of?were replacement files would come form either. Not that I'm saying it isn't happening, Vista is supposed to have a security system that stops you from replacing core system files. It just ain't happening in my system. However, I do have various system hacks in place and one of them may be stopping this. Need to look in to this. Fact:- I'm sitting with this in system now ( got no intentions of going back cause the audio's great ). I've tested 0 up-to date games and all give EAX etc. Without transmutation. Audio sounds amazing compared to what it was before and video audio finely plays in sync ( hurray). Maybay I should add a warning to this mod that you must only try it if you know what you are?doing.BTW in case this has anything to do with it, my system is :-
Asus?am2 with nforce 4, amd am2 x2 dual core cpu, 2 gig dual channel ddr2 800, oem?SB X-FI and Vista 32 ultimate.
Message Edited by Sensi on 05-09-200705:04 AM

Virtualization Technology HP Pavilion a6442p

Hello,
I recently got an HP Pavilion a6442p pc, and installed Scientific Liniux on it. I was trying to setup some of the virtualization components and was having some problems. I found that some people had to go into their BIOS on other PCs to turn on Virtualization Technology, but I cannot find this in my BIOS.
When I look here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02002520&tmp_task=useCategory&cc=us&dlc=en&lc=e...
it appears I should have this option in my BIOS. I guess I should have looked up the version of my BIOS, but I will get that and add it to this post. Does anyone have any ideas?
Thanks,
Chris.
This question was solved.
View Solution.

Hi,
If you are running the base Intel E2200 then VT is not supported.
Try the latest bios version 5.43. You need to be running VISTA or Windows 7 to install it. Now consider upgrading the processor to one which supports VT such as the Intel Core 2 Duo (W) E8xxx. You might find the processor on eBay.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

How do I enable hardware acceleration in an air exe?

I have a Stage3d game compiled as a windows bundle (exe) using adt -target bundle. Users download it from Steam and have no idea it's even running Adobe AIR.
The problem is that if the user has manually disabled hardware acceleration in Firefox, it will also be disabled in my game. In these cases, context3d.driverInfo will say "Hw_disabled=userDisabled". If they open Firefox, right-click on a flash animation, open the security settings box and check "enable hardware acceleration", it will start working on my Adobe AIR game too. (note this isn't on all systems - I can't recreate the problem myself)
I would love to pop open the display tab of the security panel for them right in my game:
Security.showSettings(Security.DISPLAY);
But that command doesn't work in AIR, it only works in browser plugins.
Explaining to users how to enable hardware acceleration in FF, IE, Safari etc seems like a terrible, confusing solution.
Any better ideas?
(also, I think this might be a bug? can anyone point me to documentation saying firefox & air should share settings like this? I went to report it but the bug tracker's down as usual: http://bugs.adobe.com/flex/)

I found the correct/new link for the bugbase: https://bugbase.adobe.com
and posted this issue as bug 3843535:
https://bugbase.adobe.com/index.cfm?event=bug&id=3843535
It seems to be an unfortunately common problem which I would love to find a workaround for if anyone has any ideas. This would be easier if I could recreate it myself...

Any wiki about enabling hardware acceleration on openssl?

Is there any wiki about how to enable hardware acceleration on openssl?
or does it just automatically happen?

Archwiki, or in general? The answer to either would be why do you want us to do your googling for you? I did a quick search for each option and took all of 5 seconds to have both answers. (edit: make that all three answers including whether it is "automatic").
Last edited by Trilby (2013-08-10 14:07:18)

B490 : How to enable virtualization technology in BIOS?

Hi,
I have Lenovo B490 machine and i need to enable virtulaization technology for using virtual box. However i do not see this option under security tab in BIOS.
My BIOS version is : H5ET40WW(1.13)
Please let me know how to get this working.
Thanks,
Kesavan

hi kesavan,
Welcome to Lenovo Community Forums!
Try Checking the Options under, Configuration TAB
Try looking for Virtual technology option,
You can refer to this thread
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Enable-Hardware-virtualization-on-y510p/m-p...
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to turn of font smoothing in minefield 4.0b8pre but still enable hardware acceleration?

I use minefield 4.0b8 pre.
I enabled Hardware Acceleration in options. But i really don't like the font render by Hardware Acceleration.
How to disable font render in minefield but still enable Hardware Acceleration.
Thanks!

Try the mozillaZine Builds forum.<br />
You need to register on the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=23

Satellite U500 - How to enable Intel virtualization technology?

How to enable Intel Virtualization Technology on Satellite U500 or if this feature is already available or not because im VMware configure in my laptop and when I wont to run it I'm getting the message
*You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host does not support VT.*
By the way my Laptop is Core2duo, Windows 7 Home Premium 64bit, RAM 3GB

Hi hersi,
Yes, thats the important model number.
According the Toshiba website your model has Intel Core2Duo T6600 CPU. So I have checked the Intel page directly and T6600 CPU doesnt support Intel Virtualization Technology (VT-x). You can check this yourself:
http://ark.intel.com
Unfortunately there is no option to enable Virtualization :(

U330 bios doesn't enable virtualization techonology mode?

Can any one from lenovo tell me why U330 bios doesn' t have virtualization technology enable?
My work MUST use the VMware. Can any one tell me how to enable it?
It 's very serious problem for me.
Regrad
Boombalaka

Ricky119,
We can inquire further, but the IdeaPad product line does not support VT presently. As it is not marketed as specifically having this feature, this will likely be seen as a future requirement rather than a bug to fix.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Cannot enable AMD-V virtualization extensions in BIOS

Hello All,
I recently purchased a like-new X120e and discovered via much trial and tribulation that Fedora and Windows 7 Pro in dual boot configuration just aren't going to happen for me right now.
This wasn't a big deal until I discovered that I can't seem to enable the AMD-V virtualization extensions in BIOS under CPU. I'll repeatedly enable them and reboot (saving changes of course) and it'll go right back to disabled.
Any advice?
Many thanks,
- DownLink

I had the same problem on a Thinkpad X121e (3051): When I enabled AMD-V virtualization in bios it would revert to disabled upon saving of the bios settings.
It turned out that Memory Protection is causing the setting to be non-sticky.
The solution is simple:
disable "Execution Prevention" (under Security -> Memory Protection);
enabled AMD-V;
enable "Execution Prevention" if you want it on;
save bios settings
Flemming from Banana hill
Flemming from Banana hill

How to enable hardware-a​ssisted virtualiza​tion on a Pavilion dv4 1135ee

Similar Messages

Maybe you are looking for

How to enable hardware-assisted virtualization on a Pavilion dv4 1135ee