How to enable hardware virtualisation support?

Today I upgraded to mac os x lion and when I open parallels desktop it asks me to enable hardware virtualisation support on my MacBook pro so that I can run windows xp as a virtual machine. I have searched the net and cannot find a way to access the bios to enable this feature, please could I have some support and advise on how to enable the VT. I did have any problems whilst I was on os x snow leopard and parallels used to work fine.
Thanks in advance.

Boot camp  is the way to go then you will be able to turn it on. Run boot camp install windows xp and you be able to get into the bios
Here's some other help full info as well
VMware Fusion 3.1.3 was designed for OS X 10.6 (Snow Leopard) but is compatible with Mac OS X 10.7 (Lion), with the reservations listed below. If you are running an older versions of VMware Fusion, upgrade to VMware Fusion 3.1.3 before upgrading to Lion. Fusion 2.x is incompatible with Lion.  For the best experience, reinstall Fusion after upgrading to Lion.  When running Fusion on Lion, these limitations are known to exist:
The Migration Assistant, included with VMware Fusion, is not compatible with Mac OS X Lion. This is due to a change in file sharing components.
VMware recommends that a Snow Leopard-based Mac be used to migrate an existing PC. The resulting virtual machine can then be used in Fusion running on Lion.
Boot Camp partitions are not accessible through Fusion after upgrading to Lion.
To work around this issue, delete the Boot Camp virtual machine from the library and recreate it.  For more information, see A Boot Camp virtual machine fails to power on with a disk error (1003483).
Minor visual issues have been reported when using Mission Control with Unity mode.
Mac OS X 10.7 (Lion) Client and Server cannot be run as guests, at this time.
VMware can provide best effort support if you choose to upgrade to Lion, but we cannot guarantee a resolution for all issues.
To be alerted when this article is updated, click Subscribe to Document in the Actions box.

Similar Messages

  • Qosmio G50-136 - How to enable Hardware virtualisation

    Hi,
    I have a Qosmio G50-136 with an Intel Core 2 Duo P8600 that is said to be YES to intel virtualization technology (VT-x) by intel itself ( [intel|http://ark.intel.com/products/35568/Intel-Core2-Duo-Processor-P8600-3M-Cache-2_40-GHz-1066-MHz-FSB] ).
    My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
    So is there a way to enable it ? I'd like to run mac os x 64 bits in vmware workstation.

    > My issue is that none of the bios settings available through HWSetup refer to hardware virtualization,
    .and did you check the BIOS settings?
    From my knowledge the VT can be enabled and disabled only in BIOS.
    If such settings is missing or not supported, you will not be able to enable/disable VT

  • How to enable hardware-a​ssisted virtualiza​tion on a Pavilion dv4 1135ee

    How to enable hardware-a​ssisted virtualiza​tion on a Pavilion dv4 1135ee
    My biaos are not supported is any option to enable vitrualization???????????????????

    Have you installed the latest BIOS?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-84257-1&cc=us&dlc=en&lc=en&...
    These fix a battery charging issue and have several other important fixes from previous updates rolled in. However, the real problem you will face is that the P7350 processor standard in that machine does not support virtualization.
    http://ark.intel.com/products/36750/Intel-Core2-Duo-Processor-P7350-%283M-Cache-2_00-GHz-1066-MHz-FS...

  • How to Enable Hardware Acceleration in FireFox 31

    Please advise how to enable hardware acceleration in FireFox 31. All my graphics and other hardware/software is current and updated. I've also paired my Bookmark Toolbar down to under 20 entries.
    FireFox is so sluggish that just a few open tabs cause the pausing "wheel of doom" every time I try to enter information or go to another part of the website. Sometimes the pauses are 5-10 seconds, sometimes a minute or more.
    I do not have this issue on the other browsers that I use.
    Thank you in advance for your help!

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can also check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Multiple_profile_files_created
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).

  • How to enable JPA2.1 support in weblogic 12.1.2

    Hi,
    how to enable JPA2.1 support in weblogic 12.1.2 ?
    I am finding javax.persistence_2.1.0.0_1-0-2.jar  in /modules/ directory of my weblogic 12.1.2 production installation. but I am not able use JPA2.1 methods , during runtime , I am getting noSuchMethod error  when I try to call  createStoredProcedureQuery. but in the javax.persistence_2.1.0.0_1-0-2.jar  it is there.
    StoredProcedureQuery storedProcedure =
    entityManager.createStoredProcedureQuery("SP_GET_GSA_CAMEL2");
    I have added the below line in commEnv.sh, But no help. Still getting the error.
    export PRE_CLASSPATH=/wls/product/ofm12.1.2/oracle_common/modules/javax.persistence_2.1.0.0_1-0-2.jar:
    can somebody reply any specific steps I have to follow to enable JPA2.1 features in weblogic 12.1.2.
    regards
    Muthuvel

    Hi Windows 2008 support only TLS 1.0 not 1.1 and 1.2, so it works OK. To use higher TLS protocols you must use at least 2008R2 SP1 or higher version of Windows server

  • How to enable Hardware Virtualization in my HP Pavilion dv6-6158nr notebook?

    i am using HP Pavilion dv6-6158nr notebook and it supports hardware virtualization but when i run a virtual machine it gives me a message to turn on hardware virtualization but when I go to BIOS to turn it on there is no option  of hardware virtualization in it now please tell me how to I enable hardware virtualization so that I keep enjoying running virtual machines thanks

    Hi,
    Please refer to this:
      http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/HP-Pavilion-dv6-enabling-VT-x-in-BIOS/td-p/...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to enable hardware acceleration in desktop Adobe AIR app

    Hello,
    As the author of this post How do I enable hardware acceleration in an air exe? , I am trying to enable hardware acceleration inside my AIR application
    If the user has disabled hardware acceleration in his flash player's settings, context3d.driverInfo will say "Hw_disabled=userDisabled"
    His only way to re-enable it is to open Internet Explorer or Firefox and right click on a flash content, then check "Enable hardware acceleration"
    I (we) would like to be allowed to re-enable it directly inside the AIR app (via actionscript code) and not telling the user to open a browser and check some random checkboxes (cause you know it's not very user-friendly...)
    A bug has been opened here Bug#3843535 - Disabling Hardware Acceleration in IE flash plugin disables it in AIR EXEs and is marked as fixed but nothing is fixed : there's still no way to enable hardware acceleration in desktop AIR application
    Thanks

    Hello,
    I pushed to get this bug fixed and was under the impression that we addressed this back in v16.  Can you share a sample app so I can have our team take a look?
    Thanks,
    Chris

  • Finaly. How to enable hardware acceleration for X-

    After much discussion on this form and with my friends, I've finally cracked hardware acceleration for X-FI on Vista. It works by using Alchemy on a large scale and gives acceleration for everything you listen to. The breakthrough finally came through thanx to help and info I received from alexs3ds on this thread?http://forums.creative.com/creativel...message.id=645?It started as an emulation concept discussion and evolved in to this. It gives all your 3D audio effects and EAX in games without game by game transmutation and I have noticed a large quality and volume enhancement in normal music and film audio because even that is now accelerated. Here's a step by step guide on how to do it.[color="#ff0033">?[color="#3366ff">Download Alchemy and install. Get it here .[color="#3366ff">http://preview.creativelabs.com/alchemy/default.aspx[color="#3366ff">?[color="#3366ff">Open a?window in explorer and go to [color="#3333ff">Windows\System32.[color="#3366ff">?[color="#3366ff">Locate the file dsound.dll and right click on it then select properties.[color="#3366ff">?[color="#3366ff">Click the security tab then click advanced.[color="#3366ff">?[color="#3366ff">In the advanced security panel?that opens up, click the owner tab then edit.[color="#3366ff">?[color="#3366ff">Use this to set your user account name as owner. Use the other users and groups button if you can't see your account name select your user account name using the select users pane and add it. Make sure your user account name is set as owner.[color="#3366ff">?[color="#3366ff">Next you want to change permissions in the advanced security panel so you would click the permissions tab, click edit, on the panel that pops up click add and add your user account name. On permission entry panel, click full control under the allow line. Then ok everything and close every thing down till your back at the explorer.[color="#3366ff">?[color="#3366ff">Now rename dsound.dll to something like dsound.dll.bak. ( changing owner and permissions allows you to do this ).[color="#3366ff">?[color="#3366ff">Open up another explorer window and navigate to the Alchemy directory ie C:\program files\alchemy, highlight the dsound.dll file and the dsound.ini file and copy them.[color="#3366ff">?[color="#3366ff">Paste them into the system32 folder and that's it. Reboot your computer and you are now using hardware accelerated sound. ?[color="#ff0033">IMPORTANT NOTES YOU MUST KNOW[color="#ff0033">?This only supports 6-Bit samples. You can't use 24-Bit audio samples. You can however reverse the process and regain support. The Alchemy drivers can cause a bit of choppy sound now and then if you don't configure them right. See the Alchemy advanced FAQ for info. Plus, remember they are Beta. You can however update your system as and when alchemy updates. It's not known if every game will work with EAX or 3Dsound with this. To my knowledge?all, if not?most do.You can still edit and add game settings to the dsound.ini file. For help and info in getting the best quality out of your X-FI and a list of what XP software you can install off your driver disk that came with your card refer to this thread. http://forums.creative.com/creativel...essage.id=6029?Enjoy. Edit:- IMPORTANT UPDATE?This will only work if your card is set in game mode. It will not work properly in any other mode. See my post further down this thread for more details.Also important is that I have only been able to test this on Vista 32 ultimate. It is untested in any other version of Vista. Perhaps people who have it running on other versions of Vista could post this info and help put together a list. ?
    Message Edited by Sensi on 05-09-200705:20 AM
    Message Edited by Sensi on 05-09-200705:20 AM

    It does work, however I discovered more?important conditions. You MUST have your audio card in game mode BEFORE you do this. The reason is that the alchemy file passes the audio to OpenAL in game mode only. IF YOU TRY TO RUN GAMES IN ANY OTHER MODE YOUR SYSTEM WILL CRASH WITH BSD. IF YOU TRY TO RUN MEDIA PLAYER IT WILL HANG. IF YOU RUN DIRECTX DIAGNOSTIC YOUR SYSTEM WILL CRASH WITH BSD. YOUR?CARD MUST BE IN GAME MODE. IF YOU TRY TO CHANGE TO GAME MODE AFTER THE SWITCH, YOU WILL NOT BE ABLE TO AS THE AUDIO PANEL WON'T LOAD. DO IT BEFORE YOU SWITCH. As for windows replacing files after reboot, that aint happening to me. I've looked everywhere and can't find any sign of?were replacement files would come form either. Not that I'm saying it isn't happening, Vista is supposed to have a security system that stops you from replacing core system files. It just ain't happening in my system. However, I do have various system hacks in place and one of them may be stopping this. Need to look in to this. Fact:- I'm sitting with this in system now ( got no intentions of going back cause the audio's great ). I've tested 0 up-to date games and all give EAX etc. Without transmutation. Audio sounds amazing compared to what it was before and video audio finely plays in sync ( hurray). Maybay I should add a warning to this mod that you must only try it if you know what you are?doing.BTW in case this has anything to do with it, my system is :-
    Asus?am2 with nforce 4, amd am2 x2 dual core cpu, 2 gig dual channel ddr2 800, oem?SB X-FI and Vista 32 ultimate.
    Message Edited by Sensi on 05-09-200705:04 AM

  • How to enable NFC HCE support in Sony Xperia A2 SO-04F?

    Greetings! Is this possible to enable NFC Host-based Card Emulation (HCE) support in Sony Xperia A2 SO-04F phone? Sony Xperia A2 SO-04F is a Japan version of the Sony Xperia Z1 Compact D5503, so I've placed my question here. But it have a different Sony CXD2235AGG NFC/FeLiCa chip and a modified Android NFC stack. If HCE support could be added only in updated firmware, please, let me know where I could ask about such possibility. Thanks a lot for your answers!  

    Hi
    Open Source Nfc stack can be found in those patches
    cd ../../../external/libnfc-nci/
    git fetch https://android.googlesource.com/platform/external/libnfc-nci refs/changes/42/103142/1 && git cherry-pick FETCH_HEAD
    git fetch https://android.googlesource.com/platform/external/libnfc-nci refs/changes/23/103123/1 && git cherry-pick FETCH_HEAD
    git fetch https://android.googlesource.com/platform/external/libnfc-nci refs/changes/51/97051/1 && git cherry-pick FETCH_HEAD
    cd ../../hardware/libhardware/
    git fetch https://android.googlesource.com/platform/hardware/libhardware refs/changes/21/103221/2 && git cherry-pick FETCH_HEAD
    Open Devices uses those patches to enable NFC functionality
    Br
    Alin
     

  • How to: Enable CUDA GPU Support for "Unsupported Cards" in CS6 (same process as in CS5+)  :) for MAC

    Hi all, I previously was involved in some discussion regarding GPU acceleration with CUDA in Premier Pro CS5 using an 'Unsupported card' with my Macbook Pro... I would like to show you this still works and will be here to show the process for anyone, and will post a video of the whole thing as a step-by-step probably tomorrow (its quite late where i am just now) but I'll give you a quick run through just now... Proof at bottom of page...
    Ps. This only applies to Nvidia card Macs.. I have no ATI card mac to try this out as OpenCL etc but i would imagine it would be a similar process...
    Step 1... Install Cuda drivers for your Mac (im using 4.2.7) here   http://www.nvidia.com/object/mac-driver-archive.html
    Step 2... Install GfxCardStatus and force your graphics (if using a laptop) to discrete card only   http://codykrieger.com/gfxCardStatus
    Step 3... Open Terminal... and run GpuSniffer... path as follows for original default installation directory, copy and paste then hit enter or change as required
                  /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/GPUSniffer.app/Contents/MacOS/GPUSniffer 
    This should give you an output as follows, while it may differ this is my output...
    --- OpenGL Info ---
    2012-05-02 01:00:28.642 GPUSniffer[6661:2403] invalid drawable
    Vendor: NVIDIA Corporation
    Renderer: NVIDIA GeForce GT 330M OpenGL Engine
    OpenGL Version: 2.1 NVIDIA-7.18.11
    GLSL Version: 1.20
    Monitors: 2
    Monitor 0 properties -
       Size: (0, 0, 1920, 1080)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    2012-05-02 01:00:28.666 GPUSniffer[6661:2403] invalid drawable
    Monitor 1 properties -
       Size: (0, -1200, 1920, 1200)
       Max texture size: 8192
       Supports non-power of two: 1
       Shaders 444: 1
       Shaders 422: 1
       Shaders 420: 1
    --- GPU Computation Info ---
    Found 2 devices supporting GPU computation.
    CUDA Device 0 -
       Name: GeForce GT 330M
       Capability: 1.2
       Driver: 4.02
       Total Video Memory: 511MB
    OpenCL Device 1 -
       Name: GeForce GT 330M
       Capability: 1.1
       Driver: 1
       Total Video Memory: 512MB
       Not chosen because it did not match the named list of cards
    Step 4... Using the name of your card from the above output, i have it underlined, in my case a GeForce GT 330M, copy this exact name as we will now add it to the list of supported cards...
    Step 5... Using terminal still, again assuming default install directories, copy and paste then hit enter on the following...
                 sudo nano /Applications/Adobe\ Premiere\ Pro\ CS6/Adobe\ Premiere\ Pro\ CS6.app/Contents/cuda_supported_cards.txt
    You will then be asked for your computer password, type it and hit enter, it will not be shown as you type FYI... You will then see the default supported cards, add your card by pasting the name you have as in Step 4, then use ctrl+x to escape, type Y to save and hit enter a couple of times to get out...
    You should now be able to run Premier Pro CS6 using the CUDA GPU option you can select in Renderer as you start a new project!!
    Any questions i will try to answer them as soon as possible, and as i said i'll screen capture and record a video tutorial as i know that would be of help to some of you out there.. Some proof, here is a pic...
    PS. It is a full 1080 pic so it is quite large...
    Message was edited by: StuCS5 - Changed Font Size

    Very usefull! it worked perfectly on premiere cs6 on my macbook pro 2.8ghz with geforce gt 330m, Any suggestion for enabling ray traced 3d also in after effect? I inserted the  geforce gt 330m on the after effect card list, but when i enable ray traced 3d the text in the comp disappear!
    thanks!

  • How to enable cross origin support in SharePoint

    Could someone please help me to enable cross origin (CORS) support on SharePoint 2010. I am following steps mentioned in http://www.avanadeblog.com/sharepointasg/2013/01/cors-request-to-sharepoint-with-basic-authentication.html and http://evolpin.wordpress.com/2012/10/12/the-cors/
    but getting 401 unauthorized error.
    Thanks,
    Manas

    Hi Manas,
    Did you wirte a custom HTTP Module ?
    As the above articles said, “There is a known Problem in IIS 7 with preflight requests (more information on preflight requests can be found here).
    When using CORS you have to deal with this type of Requests because they send an HTTP Options request to determine whether it is safe to process the request or not. As you are going to enable Basic Authentication IIS 7 is expecting to get some credentials
    also with the options request and that will fail with a 401 (Unauthorized). “
    The solution to this is writing a custom HTTP Module that changes the response header to any OPTIONS Request from 401(Unauthorized) to 200 (OK).
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • How to enable multi-language support in JAVA

    i want to make an application whose language will be URDU but how to enablw urdu or any non-english language characters in java.plz help.i am an SCJP.

    The partial answer is that you use fonts that can display those characters. But you may also have to address how to enter them from the keyboard, how to store them in databases, how to transmit them via HTTP... depending on your actual requirements.
    Start with the "Internationalization" tutorial that is referenced here: http://java.sun.com/docs/books/tutorial/

  • How do I enable hardware acceleration in an air exe?

    I have a Stage3d game compiled as a windows bundle (exe) using adt -target bundle. Users download it from Steam and have no idea it's even running Adobe AIR.
    The problem is that if the user has manually disabled hardware acceleration in Firefox, it will also be disabled in my game. In these cases, context3d.driverInfo will say "Hw_disabled=userDisabled". If they open Firefox, right-click on a flash animation, open the security settings box and check "enable hardware acceleration", it will start working on my Adobe AIR game too. (note this isn't on all systems - I can't recreate the problem myself)
    I would love to pop open the display tab of the security panel for them right in my game:
    Security.showSettings(Security.DISPLAY);
    But that command doesn't work in AIR, it only works in browser plugins.
    Explaining to users how to enable hardware acceleration in FF, IE, Safari etc seems like a terrible, confusing solution.
    Any better ideas?
    (also, I think this might be a bug? can anyone point me to documentation saying firefox & air should share settings like this? I went to report it but the bug tracker's down as usual: http://bugs.adobe.com/flex/)

    I found the correct/new link for the bugbase: https://bugbase.adobe.com
    and posted this issue as bug 3843535:
    https://bugbase.adobe.com/index.cfm?event=bug&id=3843535
    It seems to be an unfortunately common problem which I would love to find a workaround for if anyone has any ideas. This would be easier if I could recreate it myself...

  • Enable amd v support for G505S

    How to enable AMD-V  support for G505s Support .. It has A8 5550M Procesor that support AMD-V...Not able to find tht option in BIOS settings?

    Hey Divyanshuv,
        Welcome to the forums
    I believe the AMD V settings should be in the BIOS 
    F2 -> Configuration -> AMD V (for an intel CPU its called Intel vanderpool technology) 
    keep me posted
    regards
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

  • Any wiki about enabling hardware acceleration on openssl?

    Is there any wiki about how to enable hardware acceleration on openssl?
    or does it just automatically happen?

    Archwiki, or in general?  The answer to either would be why do you want us to do your googling for you?  I did a quick search for each option and took all of 5 seconds to have both answers.  (edit: make that all three answers including whether it is "automatic").
    Last edited by Trilby (2013-08-10 14:07:18)

Maybe you are looking for