How to enable health monitor on exchange 2013.

Dear All,
I ran the BPA for exchange 2013 on one of our CAS servers and received the below event, I need to enable the 'MessageCountMonitor' on exchange server. I have other counters that I need to enable but I'll start with this and apply for the rest.
Event:
The health alert value of 'MessageCountMonitor' on exchange server 'server_name' is 'Disabled', that may cause some special unhealthy state of the server. Run 'Get-ServerHealth' to get the detail information.
Learn more.

Hello,
Yes, you can safely ignore this information reports.
Thanks,
Simon Wu
TechNet Community Support

Similar Messages

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • How to implement health monitor using GRMG?

    Hi,
    I want to configure the health monitor of a big-ip (F5) load balancer, so that it does only forward requests to a netweaver cluster node, if that is fully up and running (incl. KM, Portal and WebDynpro). The big-ip can only send simple (unauthenticated) http get requests and parse the response for a contained string. I thought, GRMG's heartbeat would be a good approach to do this. I can't find any documentation or examples on how to use GRMG without CCMS. Is there some API to send GRMG requests and process the results? How does an GRMG request look like, exactly?
    Best Regards,
    Jörg

    Finally I found the answer in [Enabling Generic Request and Message Generator Heartbeat Monitoring|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a3a190-0201-0010-4984-b4fd369bb35f]. A GRMG request is a HTTP POST request that contains the XML section of a scenario from the curresponding grmg-customizing.xml file, which is for example:
    <scenario>
         <scenname>Demo</scenname>
         <scenversion>010</scenversion>
         <sceninst>100</sceninst>
         <component>
              <compname>TestWeb</compname>
              <compversion>001</compversion>
              <property>
                   <propname>url</propname>
                   <propvalue>http://...</propvalue>
              </property>
         </component>
    </scenario>

  • How do i connect manually to Exchange 2013 from Outlook 2007/2010 in another forest?

    Hello All,
    I have a source organization: Windows 2003 domain + Exchange 2010 SP3 + smtp domain acme.com
    Target organization: Winows 2012 R2 domain + Exchange 2013 CU3 + smtp domain  acme.com
    We are migrating to target organization.
    I want to connect Outlook 2007/2010 to their target mailbox (Exchange 2013) from a machine which is joined to Source DOmain.
    I couldn't use autodiscover, because as the machine is joined to source domain, autodiscover it's mapping to Exchange 2010.
    It only works when I machine is joined to target domain.
    Any idea how to connect manually to eXCHANGE 2013 mailbox from a machine which is joined to source domain?
    Regards
    José Osorio

    Hi,
    Firstly, I’d like to explain, Autodiscover service can be used cross forest:
    1. the two forests must be trusted.
    2. configure a mail contact in the original forest.
    For more information, please refer to the partition named how to configure the Autodiscover service for cross-forest moves in the following article:
    http://technet.microsoft.com/en-us/library/jj591328(v=exchg.141).aspx#BKMK_ConfigureForCrossForestMoves
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to enable ABAP maaping in Exchange Profile.

    Hi Guys,
                 Where and how can I enable ABAP mapping in exchange profile?
    Regards,
    XIer

    Hi,
    See this document. It has shown how to enable it in exchange profile:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
    Regards,
    ---Satish

  • How to find out how many users are connected to Exchange 2013 servers in "Online" mode? This is coz, online mode causing server performance issues in our environment

    All, Any script or method to find out how many users are connected to exchange servers in online mode?
    Manju Gowda

    Hi 
    You have to get the "RPC Client Access" log file in your CAS server. There you can see a column called "client-mode" and it has two modes such
    as "classic" and "cached". From there you can get the two different client assess modes and their corresponding users.
    probably take this file openup on excel and filter to see the two modes
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • EXMON "exchange server user monitor" for Exchange 2013?

    Hello,
    it Looks like EXMON is not supported for Exchange 2013. Is this correct or can i use it with Server 2012 R2 and Exchange 2013 (CU6++)  ?
    Is there any alternative to check high log growth rate to see which user is responsable for this?
    Thanks for Feedback.
    best,
    Martin

    Hi Martin,
    Yes, ExMon is not supported for exchange 2013.
    Except the suggestion above, here is an exclusive application for you reference, it could retrieve statistics for all or selected mailboxes in a specified database and server, it may give you some help:
    Exchange Server Mailbox Statistics Tool - v1.6.2
    The tool retrieves mailbox statistics which includes Folder Count, Total Items, Associated Items, Deleted Items, Total Items Size, Deleted Items Size, Oldest Item Date, Newest Item Date, Items Age, Mailbox Age and Quota details. It also includes an additional
    option named "Archive Statistics Planner" which will let you search mailboxes and provide statistics report with specific dates. 
    Best regards,
    Niko Cheng
    TechNet Community Support

  • How can i publish owa on exchange 2013 without ssl?

    hi
    i need connect to owa on exchange 2013 without ssl.
    but when i change config from https to http. my iis return internal error.
    can anybody tell me switch from https to https step by step on exchange 2013?
       regards

    Check out http://technet.microsoft.com/en-us/library/dn635115(v=exchg.150).aspx#OWA
    Bharat Suneja
    Exchangepedia.com | bsuneja
    This posting is provided "AS IS" with no warranties, and confers no rights.
    Please do not send email directly to this alias. This alias is for newsgroup purposes only.

  • How to configure ios8.1 with Exchange 2013

    Dear all,
    We have Exchange 2013 installed.
    When I tried to configure email on my iPhone (ios8.1),it connected,but cannot sync any message from server.
    I checked OWA and verify that I do not have any device connected.
    Besides, we use windows certificate.
    Anyone has idea?
    Hey, I am back

    Hi Jan,
    Thanks.
    After run test connectivity tool, I found foldersync error.
    **Attempting the FolderSync command on the Exchange ActiveSync session.
    The test of the FolderSync command failed.
     **Exchange ActiveSync returned an HTTP 500 response (Internal Server Error).
    We have checked that I have  "Include
    inheritable permissions from this object's parent" checked.
    Hey, I am back

  • How to enable an monitor parallel processing in Oracle

    Hi All,
    I have 2 short questions:
    1. When we want parallel processing, we can either use a parallel hint in the query, or alter a table to be parrallel. My question is what is the difference in the following 2 syntax:
    a. ALTER TABLE myTable PARALLEL (DEGREE 3);
    b. ALTER TABLE myTable PARALLEL 3;
    Does the "DEGREE" keywor make any difference? or they both are same statements?
    2. When we enable parallel processing, how can we monitor oracle processes, to confirm that a certain table is being actually processed by multiple threads of a singe user process?
    An early response would be highly appreciated. Thanks.

    1)The parallel clause lets you change the default degree of parallelism for queries and DML on the table.
    2) PARALLEL DEGREE specifies the number of query server processes that can scan the table in parallel. Either specify a positive integer or DEFAULT which signifies to use the initialization parameter
    check further http://mywebsys.com/oracle/syntax/view_syntax.php?id=23
    Thanks

  • How to enable rating star in sharepoint 2013 programmatically

    i want to enable rating star on a document library in sharepoint 2013, i used the way workings in sharepoint 2010，but it failed,can anyone show me?TKS in advance.

    Hi,
     Please follow the below steps to add ratings.
    If the list or library page is not already open, click the name of the library on the Quick Launch. Or, click Site Actions, click View All Site Content, and then under the appropriate
    section, click the name of the list or library.
    In the ribbon, do one of the following:
    For a list, under List Tools, click List, and then click List Settings in
    the Settings group.
    For a library, under Library Tools, click Library, and then click Library Settings in
    the Settings group.
    Under General, click Rating settings.
    Under Allow items in this list to be rated, click Yes.
    Balaji -Please click mark as answer if my reply solves your problem.

  • How to enable IRM licensing in exchange server 2010?

    I need to enable that service but I cannot find it in the management console. 

    Bharat: Having difficulty with getting the perms correct, apparently:
    RMS on Server 2008R2, Exchange2010, EXCHServers group has Read/Execute perms on servercertification.asmx and the inheritable checkbox is set.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Set-IRMConfiguration -InternalLicensingEnabled $true
    No connection could be made because the target machine actively refused it 192.168.1.46:443 ---> Unable to connect to t
    he remote server ---> Failed to get Server Info from
    https://rms.baupost.com/_wmcs/certification/server.asmx.
        + CategoryInfo          : InvalidOperation: (:) [Set-IRMConfiguration], Exception
        + FullyQualifiedErrorId : 8E3210B2,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Test-IRMConfiguration
    cmdlet Test-IRMConfiguration at command pipeline position 1
    Supply values for the following parameters:
    Sender: ************
    Results : Checking Exchange Server ...
                  - Exchange Server is running in Enterprise.
              Loading IRM configuration ...
                  - IRM configuration loaded successfully.
              Retrieving RMS Certification Uri ...
                  - RMS Certification Uri:
    https://rms.baupost.com/_wmcs/certification.
              Verifying RMS version for
    https://rms.baupost.com/_wmcs/certification ...
                  - Warning! Failed to verify RMS Version. IRM features require AD RMS on Windows Server 2008 SP2 with the
              Hotfixes specified in Knowledge Base article 973247 (http://support.microsoft.com/kb/973247) or RMS on Window
              s Server 2008 R2.
              Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
              //rms.baupost.com/_wmcs/certification/server.asmx. ---> System.Net.WebException: Unable to connect to the rem
              ote server ---> System.Net.Sockets.SocketException:
    No connection could be made because the target machine ac
              tively refused it 192.168.1.46:443
                 at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
                 at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& soc
              ket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& except
              ion)
                 --- End of inner exception stack trace ---
                 at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
                 at System.Net.HttpWebRequest.GetRequestStream()
                 at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
                 at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
              uests)
                 at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
                 --- End of inner exception stack trace ---
                 at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
                 at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
              rviceType serviceType)
                 at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()

  • How to enable power monitor and AGC

    I tried the ni5640R ADC Input Port.vi but failed to enable AGC and Power Monitor port. The ADC_0_Port_A_RSSI and ADC_0_Port_A_AGC are both fixed numbers during the acquisition.  Is there any example code for 5640R AGC and power monitoring?

    Hi Kenny,
    Power BI is offered today on Office 365 only. When you are saying "for our intranet" do you mean SharePoint Online or On-Premise?
    Guy
    GALROY

  • How to Remove and Re-Attach Exchange 2013 Database?

    A database is being copied from a location that is too small to external storage.
    Due to management wishes to prevent administrative mistakes, a journal DB that we need to keep for compliance reasons needs to be removed from EAC access.  I understand that the
    Remove-MailboxDatabase command will accomplish this.
    However, management also wants to be able to re-attach that database at a later date. 
    Can this database just be re-mounted, or is it necessary to create a NEW database and bring the mailbox info from the old DB to the new one?
    Thank you.

    Destroying/removing the fact that the Exchange Journal DB ever existed on the server is a drastic way to go if you still want to access the data in the future.  However if you wanted to do that then you would recover the data via RDB method and you
    can see more on that here
    http://technet.microsoft.com/en-us/library/ee332351%28v=exchg.150%29.aspx
    The only other methods to gain access to that EDB in the future would be to
    1. Move it then dismount it so that its not taking up any resources and can also be backed up as a flat file.  Then when needed just remount the DB, do you work and dismount again.
    2. Or use a 3rd party utility like DigiScope that can open the offline EDB without needing to be on an Exchange server.
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Satellite P300 - screen is broken - How to enable external monitor

    My screen is totally broken.
    I have hooked a desktop monitor to the laptop.
    I need to know to disable the broken one and enable the external one.
    I turn it on and im looking at one kinda glowing screen and the cracked and broken one.
    I'm sure this can be do i just dont know what buttons to push because i cant see a screen.
    Ihis is my first forum ever thanks!

    Hi mate
    I recommend using the key combination FN + F5
    You can use this in order to switch to external monitor or TV output.
    This key combination support several options:
    - internal screen + external screen
    - external screen only
    - TV out
    - etc...
    You have to press FN + F5 several times in order to get the right output.

Maybe you are looking for