How to enable Here Drive background task on WP8 Lu...

Is there anyone who can enable the disabled Here Drive background task? I could enable all other background tasks, but not Here Drive...
Restarted the phone and Here Drive a few times, Turn background tasks back on for this app the next time I open it checbox is still checked, but no success...
The silence will fall
Solved!
Go to Solution.

cjlim wrote:
I have Here Drive+ enabled in Background Task on all my phones.
Did you try disabling and re-enabling it again? 
The silence will fall

Similar Messages

  • How to enable USB drive in Virtual Machine Oracle VM?

    Hi,
    I just create Oracle Enterprise Linux 5.3 and Windows server 2003 Virtual Machine in Oracle VM. I want to use USB drive in each virtual machine.
    How to enable USB drive in Virtual Machine Oracle VM?
    Thank you very much for your helping.
    Fujimaru

    Hi,
    Have you integrated VMM and SCOM?
    Hope the links below could be helpful:
    Operations Manager Integration and PRO Improvements in SCVMM 2012
    http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
    Integrating VMM 2012 and OpsMgr 2012
    http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
    And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Calling RFC enabled FM IN BACKGROUND TASK

    Hi Frnds,
    I have a requirement where in I need to call a FM which executes 'VA02' BDC in some user exit.
    Since this has to be executed after the commit work is executed in the calling program i am using the background mode.
    something like below,
      CALL FUNCTION 'Z_SD_AVAILABILITY_CHECK_BDC'
        IN BACKGROUND TASK
        DESTINATION 'NONE'
        TABLES
          t_vbap = xvbap.
    This above FM is RFC enabled.
    And this FM is also called successfully and VA02 is executed without any error. But the FM's session does not get killed after its executed completly. Instead it creates another session of the same FM and executes the BDC again. This is goion on and on and multiple sessions are created at the end.
    Am I missing something here? Do I have to include the Performing RETURN_INFO ON END OF TASK  also?
    Please give ur suggestions.
    regards,
    Karthick C

    Hi,
    Check the SM58 to see how many calls are there. It might be that the function is called multiple times every time the user exit is triggered. So put a break point in the user exit and check that the function is actually only called once per transaction.
    As the SAP help says that the calls are stored in the tables ARFCSSTATE and ARFCSDATA, it might be worth checking the entries of this table for the function calls before the transaction commit work is executed. See [here|http://help.sap.com/saphelp_nw04/helpdata/en/8e/d05f3ce4dd3370e10000000a114084/frameset.htm]
    regards,
    Advait
    Edited by: Advait Gode on Jun 22, 2009 11:19 PM

  • How to convert a workflow background task into a  general task ??

    Dear Experts ,
    I am working om std SAP workflow for invoice document parking :
    I have done the following activities :
    1. Activate Work flow Template for Document Completion
        Here i activated the event   "Complete the Parked Log. IV Document"--> Incoming Invoice Document Parked. It is showing      a  green traffic light .
    In agent assignment
    Complete the Parked Log. IV Document>Complete the Parked Log. IV Document>Complete the Parked Invoice--> i have assigned  the user MMCONFIG
    2. In Define Release Criteria  i have the following settings :
       1000          H Credit     0.01     INR     US     MMCONFIG
       1000          S Debit     0.01     INR     US     MMCONFIG
    3. In Activate Workflow Template for Release for Posting
      Here i activated the event Incoming Invoice Complete: ReleaseRel  & i m getting a green traffic light .
    In assign agents  i did the following
    Release the Completed Log. IV Document>Release the Completed Log. IV Document>Release the Completed Log. IV Document  i assigned the user MMCONFIG
    In Invoice Parking: Approve Release i assigned the user MMCONFIG .
    For Invoice Parking: Release Invoice
    Invoice Parking: Posting an Invoice " I AM NOT ABLE TO ASSIGN ANY USER AS THESE ARE BACKGROUND TASKS ".
    Now when do a MIR7 - Park invoice & save the invoice as complete i am getting a mail in the mail box of MMCONFIG saying :
    "Invoice Release 5105xxxxxxx 2009, Completed by MMCONFIG  "
    I go & release the same invoice .
    Then i executed MIRO & tried posting the released invoice . The sysem doesnt allow me 2 post the invoice .
    It automatically goes to MIR4 transaction & forces me to save as complete
    if i try to post it the system says "Parked document is release-relevant and cannot be posted"
    Pls tell me how can I post the invoice & IF MY SETTINGS FOR THE WORKFLOW IS OK ???
    Regards
    Anis
    Edited by: anis bazmi on Nov 6, 2009 9:08 AM

    Hi argadip,
    Please help me tooo...
    Task has been transported from develpment client to another client for integration testing.
    in the shopping cart advice product has been created by the employee.
    then it goes to advisor for the approval
    This has been done by the workflow.
    It is implemented in both dutch and english.
    English - it is working fine.
    Dutch - the task is not defined.(the code is missing)
    after transporting , we did changes in the task created for implementing this approval description.
    It was working fine in both dutch and english.
    But the corrections in the code are there....
    only in the output After transported to another client dutch part approval description is not correct some part of it are missing
    Is the problem related to the transport or with the modifications of task defined ??
    Can anyone suggest me how to solve this problem.

  • How to enable Adobe Drive in CS5

    How can I enable Adobe Drive in PSCS5?
    its disabled (gray) under Preferences -> File Handling
    I want to use my CS4 Version Cue Server.
    Thx

    function(){return A.apply(null,[this].concat($A(arguments)))}
    KenToole wrote:
    I didn't suggest that this was a separate 'payed for' application
    I'm sure that's a relief to folks hoping for CS5 support of it.
    And thanks especially for the update on Subversion integration into the CS products.
    I run my own Subversion server for my team of developers.  It's pretty straightforward to set up and very much "set it and forget it" trouble-free to run.
    -Noel

  • How to enable USB drive and CDwrite in Trusted Solaris.

    hello
    I installed Trusted Solaris extensions in an X86 desktop and after that the cdwrite disappeared, the usb drive is not detected.
    How do I enable the CD writer and the zip drive ? I have a file to be copied urgently, the USB drive doesn't work, the CD writer is not seen on the menu and internet / email is still not functional on this desktop
    If there are some commands to be typed, please give me step by step instructions with command syntax and if there is a file to be altered please let me know where to find that file to be altered.
    Thank you.

    Hi Amit,
    It's the same for Solaris. Take care about the line breaks in the document (sometimes one command seems to be two commands, it's one with parameters) and there is also a small bug: On page 6, step 5, it must read "Directory = topicmaps/example" (as printed in the screenshot).
    Hope it helps
    Detlev

  • How to enable bluetooth icon in task bar in rmbp with windows 8

    The bluetooth icon dose not be showed in task bar in rmbp with windows 8.
    The device of bluetooth dose not work correctly in device manager of windows 8 with the yellow exclamation mark.
    The windows system event log shows BTHUSB alerts and error with code of 3 and 17. The driver is unloaded.
    Some apple magic mouse's functions can work, without sliding to navigate.
    The current OS is in bios enumeration mode with MBR and The logged user is in the normal account and the bootcamp is newest.
    I have remembered that the bluetooth was good without above problems when the windows 8 was installed firstly and the bootcamp can not work in administrator account. After being restored NVRAM with option+command+p+r and reinstalled windows 8 enterprise 64 completely again, it shows these problems when the bootcamp works well.
    Except the first windows installation, the second time is selecting EFI boot and the last time is in normal mode,  which has no difference in the bluetooth problem. In a normal or administrator account,  the same problems appear.

    The bluetooth drive problems have disappeared after the following steps:
    reset intel SMC
    remove the bluetooth device with yellow mark.
    scan system device changes. find 3 devices without any yellow mark: (a) Apple Broadcom Built-in Bluetooth, (b) Microsoft Bluetooth Enumerator, (c) Microsoft Bluetooth LE Enumerator.
    find magic mouse and it works well with all functions. and the icon appears in the taskbar.
    no BTHUSB error is  in system log.
    I don't know the right reasons. Maybe the efi windows installation has changed rmbp efi settings.

  • How to enable download in background?

    Everytime I start downloading something and go to HOME by pressing home button or open another app, the ongoing download fails. This problem does not occurs if I keep firefox opened.
    Duplicated: [/questions/1027956]

    HI aniksau,
    Is it possible to leave the browser running in the background?

  • Can I turn off the background task for HERE Drive+...

    Hello,
    I have installed on my new Lumia 1020 the application HERE Drive+ and I have noticed that it starts up a background task. Since I'm not using HERE Drive+ on a daily basis I think I could save some battery if I turn off this background task and it is started automatically only when I'm using Drive+ application. Can I do that?
    I went to Settings->Applications->Background tasks and tried to block HERE Drive+. So far so good but when I tried to set to ON (checked) the option "Turn background tasks back on for this app the next time I open it", HERE Drive+ application was automatically unblocked. Is this normal?
    I want to know if I can stop the background task for HERE Drive+ and have it automatically started up when I open HERE Drive+ application.
    Thank you.
    Cosmin Petrenciuc
    Solved!
    Go to Solution.

    It may be something I missunderstand. So if I go to Settings->Application->Background tasks and tap the button "Advanced" I see a list with many applications, and among them there is HERE Drive+. Above this list it is written "These apps can run in the background, and you may not be able to block all of them".
    Does this just means that HERE Drive+ application is allowed to run in the background? Do I see in this window the list of all background tasks currently running or it is just a list with the application that could run in background?
    Right now I don't have any application running. If I keep pressing on back button the app card list is empty.
    Thank you.
    Cosmin Petrenciuc

  • USB drive in my mac is disabled. I am running OSX 10.9.2 . How to enable it

    USB drive in my mac is disabled. I am running OSX 10.9.2 . How to enable it

    A SMC reset can often get ports working if they've stopped.  If you have an iMac or Mac Pro, just unplug the power cord and wait 10-15 seconds.  If you have a notebook Mac, then it a bit trickier...here is an article from apple
    http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

  • How to debug a background task that takes a lot of time to execute

    My workflow consists of a background task which takes a significant amount of time to execute completely. I have executed the BO method from SWO1 and it works fine.. takes just few secs to execute.
    But when this method is executed through workflow as a background task, it takes more than 20 mins to execute.
    What can be the possible causes and how do I debug this.

    Dear Tiyasha,
    You can debug your task even if it is a back ground task.
    The process is as follows :
    The place where want to place your break point put an infinite while loop just before your actual code.Now execute your workflow , now go to sm54 there u will find your entry and from here you can go to the debugger .In the debugger make the value of the while loop to be true so that u can proceed.
    Here u will able to debug it properly.
    Regards,
    Geet

  • How to turn off HOV, HERE Drive

    How do you turn off HOV for HERE Drive on Windows Phone 8? 
    I can't seem to find the option and driving with this app in southern california is a pain.
    Version 3.0.4121.0
    Map 8.0.49.110

    Did you ever get a fix? Just got back from LA area I could not get Here to stop working in the background(pain was correct) and now I was just notified by ATT that 90% of my Data plan is up, I thought since I have California downloaded on the mobile it wouldn't use data??? Damn

  • How to get return values In Background Task?

    Hi all,
    I have a Call Function Module In Background Task.In this FM I defined a return tables to get related info.But if use In Background Task mode,how to look/get these table values? Many thanks!
    Kelvin

    Hi,
    Create the list o/p of the return table and view the o/p in SP01 transaction.
    Regards,
    Prashant.

  • Call function in background task... How to get the result?

    I want to use Call function in background task parameter.
    But I cannot find the result of this function. (No export parameter, no table result, no exception)
    How to get the result of this function module? Correct or not?

    Hi Heinz,
    You can check the result in SM58 transaction.
    For more information pls. refer this thread :
    No IMPORTING parameters allowed in CALL FUNCTION IN BACKGROUND TASK
    Best regards,
    Prashant

  • How to enable background color printing?

    how to enable background color printing?

    There is no button involved in the following code, but it may
    be of use to you:
    <?xml version="1.0"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    creationComplete="init()">
    <mx:Script>
    <![CDATA[
    private var origColor:uint;
    private function init():void {
    origColor = dc.getStyle("selectionColor");
    public function setBackGrdColors(newColor:uint):void {
    dc.setStyle("selectionColor", origColor);
    if(dc.selectedDate){
    var dayOfWeek:Number = dc.selectedDate.day;
    else{
    return;
    switch(dayOfWeek) {
    case 0:
    if(sun.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 1:
    if(mon.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 2:
    if(tue.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 3:
    if(wed.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 4:
    if(thu.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 5:
    if(fri.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    case 6:
    if(sat.selected)
    dc.setStyle("selectionColor", newColor);
    break;
    default:
    break;
    ]]>
    </mx:Script>
    <mx:VBox horizontalAlign="center" verticalGap="20">
    <mx:DateChooser id="dc" textAlign="left"
    change="setBackGrdColors(cellColor.selectedColor)"/>
    <mx:HBox width="100%" horizontalAlign="center">
    <mx:CheckBox id="sun" label="Sun"/>
    <mx:CheckBox id="mon" label="Mon"/>
    <mx:CheckBox id="tue" label="Tue"/>
    <mx:CheckBox id="wed" label="Wed"/>
    </mx:HBox>
    <mx:HBox width="100%" horizontalAlign="center">
    <mx:CheckBox id="thu" label="Thu"/>
    <mx:CheckBox id="fri" label="Fri"/>
    <mx:CheckBox id="sat" label="Sat"/>
    </mx:HBox>
    <mx:HBox width="300" horizontalAlign="center">
    <mx:Label text="Background Color" />
    <mx:ColorPicker id="cellColor"
    selectedColor="#FF00FF"/>
    </mx:HBox>
    </mx:VBox>
    </mx:Application>

Maybe you are looking for