How to enable IDOC serialization at message type level

Hi,
I am trying to enable IDOC serialization at message type and i am unable to achieve the desired results.
SETTINGS DONE:
I have done the settings required under SALE trsanaction
ALE IMG (transaction SALE)
   Model and Implement Business Processes
      Configure Master Data Distribution
          Set-Up Data for Sending and Receiving Serialization
              Serialization by Message Type
I have done the settings in both the receiving system and the sending system.
PROBLEM:
I am trying to send the Material classification first and then followed by Material class and then try to send the material itself to the other system. Since the serialization is enabled in the system, i was expecting that there should not be any errors.
But since the material classification IDOC is posted first it throws an error saying the Material Class does not exists. Since the serialization is enabled in the system i was expecting that the system would ensure that it post the Matrial class first and then post the material classification. I mean it would post in the order in which i have defined in the serialization.
Settings at Partner Profile.
    - I have set the trigger in background for all the message types except the SERDAT message type which is set trigger immediately.
Any idea what i am missing? Any suggestions on what needs to be done to ensure that the idoc is posted in serialization?
Edited by: Workflow learner on Jun 4, 2008 1:21 PM

Hi,
Create a custom transaction for PO Print & make the necessary changes as per your requirement In the custom program which you attach to the custom transaction you can put a validation to display the price based on user ID or some other parameters.
Thanks & Regards,

Similar Messages

How to send IDOC with extended message type MATMAS

Hi Experts,
I am looking for a solution to send open PR & open PO related data for diffrent materials through as IDCO in XML file.
Scenario is i have to show a report in a 3rd party system for open PR & open PR that too will come after selection some materials. That means select a materials & it will show all the open PO & related data in a report.
The rough idea for the solution i got is I can save the data in XML file in the system. For this i have to send IDOC. but the problem is there is no message type for PR. IF i am not wrong i can extend the MATMAS05 for a segment that will have PR related info.
Now what to do with that how to send the IDOC do i need to create another report to send IDOC or i can send the extended one through BD10. I tried it but it shows error message "0 communication idoc sent" so I dont no y such error is coming i think i am not filling the extended idoc. But again my QUestion is how to do that.
Can i use BAPI also for such work, if then how it can be helpful.
If anyone have any other solution Please help me out of this.
Regards,
Nik

Hi Mahesh,
Thanks for your reply.
My requirement is bit different. i have to send Open PR data for diffrent materials. In a 3rd party application user will search for few materials which will generate a report that will show the PR related data for those material.
That means for few selected materials there will be few PR's which may be open, i have to show those in my report.
Eg: material A, B. are in PR 00001 & material B, C in PR 00002.
After selecting materials A to C report will show
Material                 PR No                   Item No                Quantity
A                           00001                    10                             1
B                           00001                     20                            3
B                           00002                     10                            3
C                           00002                      10                           1
Same thing i have to do for open PO & open Sales order also.
Can u please help me to provide the solution how can i proceed for it. U have given the Message type & a bapi how it will help in my issue?
I got a suggesion from someone that extend message type matmas for PR, PO, SD related data & send the idoc. but i am confused how to pass that much data ina single IDOC.
Regards,
Nik

How to control ME9F printout at Message type level

Hi MM Consultants
I have the following issue with my client. We have defined 2 message types related to Purchase Order printout .
through 1 message type we can see price in printout and through 2nd we can't . We need to define authorizations, so that certain users can output certain message types and others not. but apparently there is no authorization objects related to message types.
please help me to acheive the same ,
Regards
anubhav

Hi,
Create a custom transaction for PO Print & make the necessary changes as per your requirement In the custom program which you attach to the custom transaction you can put a validation to display the price based on user ID or some other parameters.
Thanks & Regards,

How to solve the INFREC Idoc failure with message type

Hi,
Please let me know how can we solve the INFREC Idoc with the message type" Not possible to set tax code without tax calculation schema"
Pl suggest me how to tackle this Idoc failure.
Regards
Raj

Hi,
An\ybody..please suggest.. It is very urgent..
Regards
Raj

Inbound Idoc for own Message type

Dear All,
I have created a message type for outbound and sent data to the Java System.But when distributing in BD64 inbound parameters are not getting created.
For inbound idoc if i am creating a new message type,How i can get data from external server and commit it in database.
We have to write any program as we do for outbound?
Another issue outbound idoc is in waiting status i have to process it in BD87.How i can sent it immediately and in partner profile, distributing in module view BD64 i have given Transfer IDoc Immediately.
PLZ reply ASAP.
Thanks & Regards,
Arun.

Dear rhea,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

Idoc generation for message types

Hi All,
regarding IDOC generation....
how do we activate the message type so that every time the application data which is created or changed or deleted generates the idoc and send it to other system. If iam not using Chnage pointers technique then i would not be activating the message type in BD50. In such case ie if the message type is not present in BD50 list and if change pointers is not used to transfer that message type . How do we genrate the idoc for such message types.
Thanks
Avinash

Hi,
For ur scenario u need to go for change pointers method only.U have other options like distributing master data and transactional data..But i don't think anything otherthan change pointers is useful.
Regards,
Nagaraj

ALE Configuration for PEXR2002 IDoc and PAYEXT message type sending to XI

Hi all,
I need ALE Configuration for PEXR2002(Basic Type) IDoc , it's message type PAYEXT.
I don't know ALE Configuration for sending data from SAP IDS to SAP XI.????
I need ALE Configuration doc/pdf??
Please give me some guidline for this..
Regards,
Umesh

Umesh,
I was wondering if you have had any luck creating the configuration for PEXR2002 Idoc, PAYEXT message types, and sending the result set to XI.
I need to perform the same task within our R3 environment using the FTP protocol in XI to send the file to the Bank to be processed.
Any help or direction would be great.
Thanks,
Dave

Outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON

Hi Friends
I am trying to pack outbound delivery with Inbound IDOC DELVRY06 with Message type SHPCON.
But IDOC has error Specification of destination HU missing.
Could you please help us to resolve the issue to Pack the outbound delivery with the IDOC.
Thanks
SR

HI Ian Kehoe
Sorry for delay in reply
Thanks you very much
I solved that problem .
Could you please advice test data for IDOC DELVRY06 packing hierarchy (multi level packing) to pack SAP outbound delivery.
Thanks
Ravi

1 request Idocs created for message type MATMAS

Hi Experts
I have done necessary config.
I have attempted BD10 and BD11.
I have got message that "1 request Idocs created for message type MATMAS"
But iam unable to find the material in target system.
Please suggest what need to be done.
regards
ramSiva

Marias,
And in PI, after having changed the password (why not), have you unlock this user account ? in SU01 of PI, you have a lock button.
if you did it, and changed also the password, as explained, you have perhaps another (or several) program like a RFC destination which uses another password, and so after some exchanges... with a bad/old password, you have your message "too many...", and then the user is again locked...
If you change the password in PI, you should change it in all application which uses this user. I hope you have not the same user from ECC to PI, than from a third-party to PI...
that's why: the use of such technical users have to be referenced in a doc. By this way, if password has to modifiy, we know where we have to update it (mainly in different RFC destination).
Mickael
Edited by: Mickael Huchet on Dec 5, 2011 5:33 PM

How to drop an IDOC and stop message type to trigger ?

Hey Guys,
I am creating oubound IDOC for sales order confirmation. Based on storage location values I have to restrict line items which should go in IDOC. I am using program ZXVEDU02 to write the code and achieve this.
The problem is that based on the logic and conditions when there are no line items are to be sent in sales order to particular partner, I have to drop IDOC itself. How to do this? please help.
If in the above program, I write delete int_edidd, the sales order is not getting created with update termination message coming in user inbox.
I wanted to stop the trigerring of message type also.
any inputs on this will be appricated.
Thanks and Regards,
Vishwanath Purohit

hi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm

Purchase Order Outbound Idoc issue. Message Type ORDER

Hi Experts,
I am having issue with outbound IDoc generated from Purchase Order.(Message Type ORDER and Basic Type ORDERS05)
Issue is when i create PO idoc Segment E1EDP01 and field ACTION populates as 001 this works fine.
Now when made any changes to the purchase order.* PO trigers one more EDI - Idoc. but the ACTION field is stil as 002.*
Could any tell me how to fix this.
Cheers...Gopinath.

Hi,
Thank you.
I have found the issue and fixed.
Below three setting was missing same has been done in Partner Profile now ok.
Message type u2013 ORDCHG, Processing Code u2013 ME11 and Change flag On.
Cheers..Gopinath
Edited by: Gopinath A.R on Oct 8, 2009 3:14 PM

How to use objects as a message type in WSDL?

How can I use object as a type for the message in WSDL?
For example, I want to achieve something like this:
<message name="DBConnection">
<part name="conn" type="???"/>
</message>
In the above example, for any operation getConnection(), the return type would be an object of the type Connection.
Any suggestions ?
Thanks,
Dhaval

Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
Exit Settings. Your device is now ready to be used as a modem for your Mac!
Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here: http://europe.nokia.com/get-support-and-software/download-software/device-as-a-modem/connect-to-your...
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Message Edited by sandy2410 on 30-Mar-2009 04:52 AM
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

How to restrist access for a message type

how do we insert A-HQ, HS-Z , 0-9 in the Message type (EDI_MES) for the auth object S_IDOCMONI, here we are just excluding all the values that start with HR. This will not give the users access to HR messages

Hi renjy,
S_IDOCMONI has the following fields:
ACTVT Activity
EDI_DIR Direction for IDoc
EDI_MES Message Type
EDI_PRN Partner number
EDI_PRT Partner Type
EDI_TCD Transaction Code
The values entered in EDI_MES are permitted message types. So just use the following combination to restrict the user from displaying HR message types.
EDI_MES----> A* to HQ, HS to Z, 0 to 9*.
To do this:
PFCG->Enter into the role>Open Authorizations>Search for object S_IDOCMONI -> Open the field EDI_MES-> Enter the range mentioned above-------> Save and generate.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

IDoc transfer error - Message Type Conversion

Hi,
While trying to transfer an IDocs from a 46C system, i get the following STATUS message in transaction BD87
Message type RPM_TIME could not be converted
Message no. EA 694
Diagnosis
Conversion entry between long and short names missing.
System Response
IDoc cannot be processed without this entry.
Procedure
Create an appropriate entry for logical message RPM_TIME.
Could you anyone let me know the reason as to why it occurs.
Regards,
Roshith

The problem is the FM for that action is trying to use a material movement to make the transfer. You can't use standard material movements to transfer into QI once you have activated any of the materials inspection types.
What inspection lot is generated by your current action box? I'm guessing an 89. I can't remember.
Have an ABAP'er trace the FM and determine how it is doing the stock transfer. If it is using a 322 it won't work with QM active. You will have to have you ABAP'er modify it to use a 311 or 411 which will then use the 08 inspection type. I suggest you use a copy of 411 or 311 for this.
Craig

ALE - Status 52 Idocs for HRMD_A message type

HRMD_A Idocs in target system are not completely posted, turning into status '52'. Most of the times the infotype 1001 idoc with relations ship P->S arrives before the idoc which has the actual objects(P, S) causing 'Relationship imposible because the object does not exist". We use program RBDAPP01 for inbound processing of Idoc which should take care of Serialization based on the time stamp of idoc creation in source system.
Change pointors for Message type HRMD_A are processed using program RBDMIDOC in source system.
It is unlikely that relationship P->S is created without object P being created in the source system. So the change pointors should create the idocs in the same sequence. But it is not happening.
Any help on this appreciated.

Hi Santosh,
If you haven't found by now the .... here is the Solution:
First change the size of table T77S0 check out note 305688
Then process the IDOCS again - check out note 363187
Regards
Luis

How to enable IDOC serialization at message type level

Similar Messages

Maybe you are looking for