How to enable LogMiner in Oracle 10g

Can anyone enable LogMiner GUI in orcale database 10g?

but the oracle documentation on logminer proves that the logminer GUI can be started from the EM database control on 10g.
How do we start the logminer through EM?
Everyone try and contribute,this is amajor challenge for many.

Similar Messages

  • How to enable tracing in Oracle Forms 10g

    Hi Friends,
    I am interested to trace my running oracle forms application. When I googled it, I got below useful information. But theory and practical has mismatch somewhere, I am not able to create the trace file(s).
    **************************** Some Notes ****************************************************
    How to Enable Tracing in Oracle Forms 10g
    Enable Tracing from the url by adding the following to your forms url:
    &record=forms&tracegroup=0-98,100-199 (note: item 99 causes some issues, so we are skipping it here. See the Oracle documenation for a description of what is being traced for each item.)
    for example
    [http://machine:port/forms/frmservlet?config=myConfig&record=forms&tracegroup=0-98,100-199]
    You will get a trace file in the following location:
    %ORACLE_HOME%\forms\trace\forms_xxx.trc where xxx is the forms session ID.
    Open dos window and do the following:
    set ORACLE_HOME=
    set PATH=%ORACLE_HOME%\jdk\bin;%PATH%
    set CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%ORACLE_HOME%\forms\java\frmxlate.jar
    java oracle.forms.diagnostics.Xlate datafile=%ORACLE_HOME%\forms\trace\forms_xxx.trc outputfile=%ORACLE_HOME%\forms\trace\html_xxx.html outputclass=WriteOutHTML
    you will get a file html_xxx.html in your %ORACLE_HOME%\forms\trace directory.
    I need information beyond this to make this practically successful.
    Thanks in advance,
    Amol Naik

    Hello,
    <p>Did you read this paper ?</p>
    Francois

  • How to delete client from oracle 10g ASM

    Hi,
    I would like to know how to delete client from oracle 10g ASM, while configuring Dataguard in same windows os i have by mistake created the standby in ASM.
    However later i have corrected the datafile destination. My Primary database is in ASM and the standby in disk.
    Could anyone please tell me how do i delete the client from ASM. On view from asmcmd it shows db_unknown and from v$asm_client
    GROUP_NUMBER INSTANCE_NAME
    DB_NAME STATUS
    SOFTWARE_VERSION
    COMPATIBLE_VERSION
    1 stby
    stby CONNECTED
    10.2.0.1.0
    10.2.0.1.0
    Thanks and regards,
    shaan

    Hi Deepak,
    Pls see the result from the view, i wanted to delete stby
    SQL> select * from v$asm_client;
    GROUP_NUMBER INSTANCE_NAME
    DB_NAME STATUS
    SOFTWARE_VERSION
    COMPATIBLE_VERSION
    1 prim
    prim CONNECTED
    10.2.0.1.0
    10.2.0.1.0
    2 prim
    prim CONNECTED
    10.2.0.1.0
    10.2.0.1.0
    1 stby
    stby CONNECTED
    10.2.0.1.0
    10.2.0.1.0
    regards,
    shaan

  • How to export AWM in Oracle 10g

    Hi All,
    Im doing export of my Analytical Workspace with option tables=AW$TEST, this command failed and thrown EXP-00055: CALLDETAIL_TEST.AW$TEST is marked not exportable, i checked NOEXP$ table and i can find my AW name in it, according to table definition i cann't perform export of those objects listed in NOEXP$ table right, I want to know from you pals how can i export AW and then import it ?
    Need your feedback asap.
    Thanking you pals in advance
    Hassan khan

    Abhii wrote:
    How to store image in Oracle 10g?
    any example ?http://www.google.co.in/search?rlz=1C1GGLS_enIN321IN321&sourceid=chrome&ie=UTF-8&q=How+to+store+image+in+Oracle
    HTH
    Aman....

  • How to enable SSL in oracle 11i

    HI
    1)How to enable SSL in oracle 11i
    2)How do I make an oralce 11i instance available on the internet
    can some one suggest the procedure and the metalink doc or forums that can be referred to for better understanding and using the applcaitons
    Regrads

    Refer to the following notes:
    Note: 123718.1 - 11i: A Guide to Understanding and Implementing SSL for Oracle Applications
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=123718.1
    Note: 217368.1 - Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217368.1
    Note: 229335.1 - Best Practices For Securing Oracle E-Business Suite 11i For Internet Access
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=229335.1

  • How to use iframes in oracle 10g

    I have to load two jsp pages in a single html . I have done that thru iframes. But i have to dynamically load the second jsp page in the frame 2 , when the user clicks upon certain details in the frame 1 jsp page. I have wriiten the code of document.iframe in format trigger attribute. It doesn't work. Is there any other way to achieve this. I want to load the frame 2 jsp page dynamically , according to the input i get from frame 1 jsp page.

    Hi,
    >>Anybody know how to use profiler in oracle 10g
    What do you mean "profiler". About Resource Limits/Create Profiles ?
    >>i couldn't able to install the enterprise manager console.
    What OS ?
    >>because i need to trace the execution of a stored procedure.waiting the reply.
    Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
    Cheers

  • How to Send mail in oracle 10g

    I am new in oracle developer.....we are using oracle 10g developer...how to send mail through oracle 10g on a button click.pease help me.
    Thanks in advance

    This question have been asked many times on this forum, see if you get help from following:
    https://forums.oracle.com/message/5395438#5395438
    Search results: https://forums.oracle.com/thread/search.jspa?peopleEnabled=true&userID=&containerType=&container=&q=form+email
    Check this out as well:
    http://nzchaudhry.wordpress.com/2013/05/31/send-report-via-email-attachment-in-oracle-forms-10g/
    You can find init.ora or initSID.ora file under $ORACLE_HOME/dbs on linux and on Windows under $ORACLE_HOME/database. Otherwise you can create it using "create pfile from spfile" command
    Aneel

  • How to Use Profiler in ORACLE 10g

    Hi all,
    Anybody know how to use profiler in oracle 10g and also i couldn't able to install the enterprise manager console.is there any tools available for that.because i need to trace the execution of a stored procedure.waiting the reply.
    Sathish

    Hi,
    >>Anybody know how to use profiler in oracle 10g
    What do you mean "profiler". About Resource Limits/Create Profiles ?
    >>i couldn't able to install the enterprise manager console.
    What OS ?
    >>because i need to trace the execution of a stored procedure.waiting the reply.
    Debug ? You can use SQL Developer, TOAD, PLSQL Developer for this purpose.
    Cheers

  • How to recreate datafile in oracle 10g.

    pls tell me how to recreate datafile in oracle 10g...
    what are situation to recreate datafile
    Edited by: 898085 on Nov 18, 2011 9:16 PM

    898085 wrote:
    pls tell me how to recreate datafile in oracle 10g...
    what are situation to recreate datafile
    Edited by: 898085 on Nov 18, 2011 9:16 PMDid u mean create or recreate?
    if datafie is deleted then you may add it into existing tablespace.
    Try this : -
    1.)sqlplus sys/xx as sysdba
    2.)alter tablespace <tablespace_name> add datafile <datafile_name> size <give size>;
    HTH:-)

  • How to Configure Webutil in Oracle 10g Developer Suit

    Dear All,
    How to Configure Webutil in Oracle 10g Developer Suit.
    Please give me the step by step solution.
    Thanks and Regards,
    Fazil

    This is a very frequently asked question. Searching the Forum or the Forms Help system would have given you your answer! Search Forms Help on "Configure WebUtil" and read the configuration guide and checklist articles.
    Craig...

  • Enable autoarchiving for Oracle 10g RAC db

    Hello
    What are the steps to enable autoarchiving for Oracle 10g cluster database?
    It is currentrly in noarchivelog mode.
    Thank you,
    Yelena

    Hi.
    I think that this has been improved in 10g, so that we can do an exclusive mount on any database in a RAC without setting cluster_database to false. Also the parameter log_archive_start has been depreciated so the steps is simply (assuming that you by default wants to use db_recovery_file_dest to store archived redo logs)
    1) Shutdown immediate (instance 1)
    2) Startup mount
    3) Alter database archivelog
    4) Alter database open
    Repeat this sequence for all nodes in the RAC.
    And the best is to leave the log_archive_format by it's default value, to ensure that the incarnation of the database is represented in the archive log name.
    (On 10g, backupsets and archivelogs are usable beyond different reincarnation of a database, so there is a good change that S% or s% will repeat itself after an open resetlogs).
    Hopes this might help you.
    Good Luck
    Rgds
    Kjell Ove

  • Is it possible to enable Java in oracle 10g express with the oracle jvm?

    I've oracle 10g express installed. I would like to create java stored procedures in a schema. But, how do I have the database java-enabled?

    It might be possible.
    Realize, however, that the Oracle JVM is a component of the Standard Edition One and higher - so to be able to use it you need to license Standard Edition One or higher.
    If you are going to violate the license anyway, why not stick with an Edition that contains the JVM.

  • Enabling JVM in Oracle 10g Express

    I'm trying to enable JVM on my Oracle 10g Express database. However, the script I'm told to run - initjvm.sql - doesn't exist anywhere on my computer. Neither does the folder javavm and I can't find anything that says how to get a hold of them.
    Help? :(

    Hi:
    Oracle Express edition (XE) do not include Oracle internal JVM.
    AFAIK the decision to not include this feature was to reduce the size of the installer package.
    Oracle JVM is included on Oracle Standard Edition One and EE.
    Best regards, Marcelo

  • Partition option not enabled feature in oracle 10g

    Hi,
    I have installed Oracle 10g on Linux 32 bit.
    But when I am adding a table with Paritiion its showing Partition not enabled.
    How to enable the Partitioning option without dropping the database.
    Kindly any help will be needful for me

    Hi,
    Means I dont have to drop the existing database?
    If I do Custom installation to Add Partitiong option under which meanu Partition option will fall?
    Do i need to perform the following steps:
    If it is not enabled in the database then :
    - Shutdown all databases that use this ORACLE_HOME
    - Run the following
    $ cd $ORACLE_HOME/rdbms/lib
    $ make -f ins_rdbms.mk part_on
    $ make -f ins_rdbms.mk ioracle
    - Startup the database and check the value for partitioning option in the
    v$option view, it should be TRUE now

  • How to know whether my oracle 10g instalation in unicode supported or not

    Hi
    i am new to oracle. I have installed Oracle 10g client and server.
    I want to know whether the database created can store unicode data/arabic data.
    Please guide me how can i find whether unicode support is on for my db or not.
    The outputs of some of the queries run by me are as follows:
    SQL> HOST ECHO $NLS_LANG;
    $NLS_LANG
    SQL> HOST ECHO %NLS_LANG%;
    %NLS_LANG%
    SQL> @.[%NLS_LANG%];
    SP2-0310: unable to open file ".[AMERICAN_AMERICA.WE8MSWIN1252]"
    SQL> select cust_eng_name,cust_arb_name from custmast;
    select cust_eng_name,cust_arb_name from custmast
    ERROR at line 1:
    ORA-00942: table or view does not exist
    Please reply me asap.

    user10817093 wrote:
    1. Yeh that is the thing I want. What are the other steps that i need to do with my Oracle Client/Server for unicode support.
    Where i am getting trouble is the Oracle Client/Server unicode support.
    And how to decide what character set will suite me best.1. If your application is going to be a "true" Unicode application, you can set the NLS_LANG registry/environment setting on your clients to ".UTF8" to enable true Unicode support.
    2. Your database needs to support Unicode, too.
    The recommended database character set for this in 10g is "AL32UTF8".
    If you currently have a single-byte database character set (WE8MSWIN1252), you need to decide how to get this done.
    If you can simply create a new database using the "AL32UTF8" character set, this would be the easiest way.
    There are several documents available (e.g. on Oracle MetaLink) that describe in detail how to convert the character set of an existing database. Depending on your data this can be a tedious task involving several steps, so may be creating a new database and exporting/importing the data might be the simplest choice if you need to migrate some existing data.
    The recommended national character set is "AL16UTF16", by the way, but that shouldn't matter that much once you have a Unicode enabled database using "AL32UTF8" as database character set.
    2. How to set/retrive the "Database Character Set" and "National Character Set". This has already been answered partly. Retrieve:
    Database Character Set:
    SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_CHARACTERSET';National Character Set:
    SELECT VALUE FROM NLS_DATABASE_PARAMETERS WHERE PARAMETER = 'NLS_NCHAR_CHARACTERSET';In most of the cases you can't just simply set/alter the character sets, as outlined above.
    Regards,
    Randolf
    Oracle related stuff blog:
    http://oracle-randolf.blogspot.com/
    SQLTools++ for Oracle (Open source Oracle GUI for Windows):
    http://www.sqltools-plusplus.org:7676/
    http://sourceforge.net/projects/sqlt-pp/

Maybe you are looking for