How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

Similar Messages

  • HT1212 how to enable my iphone after it has been disenabled?

    How to enable my iphone after it has been disabled?

    You have to restore the iPad in order to unlock it using these instructions.
    http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

  • Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

    Does the iPhone 4 disable for 24 hours after too many failed attempts at entering the passcode

    Oh thank you. Only thing is I have no backup, so i'd prefer to wait if there is a 24 hour lock out... Someone told me they thought there was, and I can't find anything on google to tell me how many attempts you get and how long you get locked out for each time. A friend made me a new passcode when under the influence and now after thinking about it remembers what he changed it to

  • Your request cannot be completed because your Apple ID has been associated with too many credit cards.what is that mean please tell Apple

    Please help me I don't know what is this mean : Your request cannot be completed because your Apple ID has been associated with too many credit cards.
    And you tell me what to do?

    New one to me, you might try contacting Apple through iTunes Store Support

  • How to settle the expenses after AUC has been capitalised.

    Hi All,
    I have a understanding that after AUC has been settled, we can edit the settlement rule in WBS element and settle directly to the capitalised assets.
    I can not see the settlement rule but investment profile since the project being a Capital comes from Investment measure and automatically created.
    Can you tell me how to create a new settlement rule in this case. It is Urgent
    Regards
    VK

    Hi Vijay,
    This requires a change in the settlement rule since the AUC is no more and it must be the settlement reveiver earlier which should be changed to the main asset after capitalisation.
    Please go to Transaction code CJ20N, select the WBS and go to settlement rule via edit > Cost and set the receiver as the fixed assets itself instead of AUCV since AUC has been transferred to main assets.
    You can then settle using CJ8G or CJ88 but CJ88 is a better option.
    I think, I have answered the same query.
    Regards
    Bharat

  • HT201274 how to erase iphone 4s after service has been terminated

    how to erase iPhone 4s content after service has been terminated

    Man I don't know what else you can do.
    you can log into icloud.com, but you can't erase the phone, because you aren't connected to wifi or cellular data.

  • TS1424 How To Enable My Apple ID it has been Disabled

    I need help accessing I have tried everything to enable my. Apple It has been disabled, I've tried resseting my pass, logging in and out also contacted iTunes via email and phone but they cant help me!! Help please

    You need to contact itunes support.
    http://www.apple.com/support/contact/
    There is NO telephone support for itunes.  Use the link above.

  • HT4113 how can i unlocked the ipod disabled after too many wrong attempts

    how can i unlocked the ipod disabled after too many wrong attempts

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    James5wins, you do not have to restore as new. Restoring from backup does NOT restore the screen-lock passcode.

  • How to unlock ipod that has been disabled from to many password attempts

    How to unlock I pod when it has been disabled due t, to many pass word tries.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT201210 how can i enable my device after it has been disabled and itunes wont connect to it?

    itunes wont connect to my device because it has a passode set. but i can not disable the passcode because my device is disabled. what can i do about it?

    Put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.

  • HT204053 can i sign up for icloud find my ipad after it has been taken

    I have lost or my ipad2 has been taken.  How do I locate it if I have my apple id and password but didnt load the app prior to it being taken.

    You can go into Settings, choose General (on the left side), then choose Software Update on the right side. This should tell you which iOS (operating system) you are presently using.  No doubt it will tell you there is an update.
    You will need to connect your iPad to your computer and update it through iTunes to the latest iOS, which is iOS6.  Once your iPad is connected via the cable to your computer, launch iTunes. The iPad will appear in the bar on the left, click on it and you will be able to see the General Information about the iPad.  You will likely get a pop-up window notifying you there is a new iOS as soon as iTunes recognizes your iPad. Then iTunes will ask if you want to download and update to the new iOS. Do that. It will take probably 20-30 minutes depending on your computer and your iPad.  After the update has finished, you will need to enable iCloud which will allow you to use the Find my iPad app. Please read about iCloud from the Apple Support Site BEFORE you enable it at http://www.apple.com/support/icloud/  Good luck.

  • How to enable back the menu bar has been disable?

    I has been disable the menu bar. and i want to enable back
    == This happened ==
    Every time Firefox opened
    == when i disable the menu bar

    '''ALT V
    T
    M'''
    Be sure to do this in a blank tab.

  • How to restore Browsing History after it has been deleted.

    I need to restore the Browsing History of my computer. Once the history has been deleted, is it possible to find the information anywhere else on the computer?

    Hi.
    After create_column method you have to create cl_salv_wd_uie_text_view object:
      data:
        " Variables para configurar los ALVs.
        lr_alv_config_table  type ref to cl_salv_wd_config_table,
        lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
        lr_wd_table          TYPE REF TO iwci_salv_wd_table,
        lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
        lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
        lr_column            TYPE REF TO cl_salv_wd_column,
        lr_text              type ref to cl_salv_wd_uie_text_view,
        lr_header type ref to cl_salv_wd_column_header.
      " Initialize variables
      lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
      if lr_lr_wd_table_usage->has_active_component( ) is initial.
        lr_lr_wd_table_usage->create_component( ).
      endif.
      lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
      lr_alv_config_table = lr_wd_table->get_model( ).
      lr_column_settings ?= lr_alv_config_table.
      lr_table_settings ?= lr_alv_config_table.
      " Delete Column.
      lr_column_settings->delete_column( 'OBJID' ).
      " Create column.
      lr_column = lr_column_settings->create_column( 'OBJID' ).
      create object lr_text.
      lr_text->set_text_fieldname( 'OBJID' ).
      lr_column->set_cell_editor( lr_text ).
      " Change the header of the column.
      lr_column->GET_HEADER( receiving value = lr_header ).
      if lr_header is bound.
        lr_column->delete_HEADER( receiving value = lr_header ).
      endif.
      lr_column->create_HEADER( receiving value = lr_header ).
      lr_header->SET_TEXT( exporting value = 'Objid Field' ).

  • ALV , How to add a Field after it has been deleted

    Hi,
    I am formating a ABAP Webdynpro ALV: I remove a field by using :
        l_value->if_salv_wd_column_settings~delete_column( lv_field_name).
    How will I be able to add the field again ?
    I tried the following :
        l_value->if_salv_wd_column_settings~CREATE_COLUMN( lv_field_name).
    but getting a 'null' object reference in the following standard code :
    if ls_column-r_column->r_cell_editor->visible_fieldname is initial.
    Regards

    Hi.
    After create_column method you have to create cl_salv_wd_uie_text_view object:
      data:
        " Variables para configurar los ALVs.
        lr_alv_config_table  type ref to cl_salv_wd_config_table,
        lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
        lr_wd_table          TYPE REF TO iwci_salv_wd_table,
        lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
        lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
        lr_column            TYPE REF TO cl_salv_wd_column,
        lr_text              type ref to cl_salv_wd_uie_text_view,
        lr_header type ref to cl_salv_wd_column_header.
      " Initialize variables
      lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
      if lr_lr_wd_table_usage->has_active_component( ) is initial.
        lr_lr_wd_table_usage->create_component( ).
      endif.
      lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
      lr_alv_config_table = lr_wd_table->get_model( ).
      lr_column_settings ?= lr_alv_config_table.
      lr_table_settings ?= lr_alv_config_table.
      " Delete Column.
      lr_column_settings->delete_column( 'OBJID' ).
      " Create column.
      lr_column = lr_column_settings->create_column( 'OBJID' ).
      create object lr_text.
      lr_text->set_text_fieldname( 'OBJID' ).
      lr_column->set_cell_editor( lr_text ).
      " Change the header of the column.
      lr_column->GET_HEADER( receiving value = lr_header ).
      if lr_header is bound.
        lr_column->delete_HEADER( receiving value = lr_header ).
      endif.
      lr_column->create_HEADER( receiving value = lr_header ).
      lr_header->SET_TEXT( exporting value = 'Objid Field' ).

  • How to get a report after blocks has been removed in MRBR

    Hi,
    After removing  the blocks manually in MRBR. We can see the invoices with X mark which had blocked for (price, qty or date) block in MRBR report.
    But when we remove the block automatically (i.e release block automatically), if we again go and check in MRBR their won't be any blocks (which shows "X" mark) in MRBR report.
    Can anyone suggest me is there any report which shows the invoices which got automatically released and the blocked reason (price /  qty / date block).
    Thank you,
    Vinay

    I'm 99.9% sure there is no such report or even possibility.
    Regards,
    Nick

Maybe you are looking for