How to enable only 3G
I see that there is no option to disable 3G alone in iPhone 4s. Is there a way to do just the opposite ? ( enable only 3G, disable 2g and edge and GPRS ). OS VERSION - 5.0.1
No.
Similar Messages
-
How to enable only a subset of LDAP users to be able to login to OBIEE
We have enabled LDAP authentication. Now every single LDAP user can login to Presentation server. That is an issue. Not all LDAP users are OBIEE users. Only a small subset of the LDAP users should be able to access OBIEE. We have a database table that lists all OBIEE users. This table however does not have user password information. User Password information is stored in the LDAP.
so question is how do we limit OBIEE access to only OBIEE users and not all LDAP users.
Thank youThanks for your suggestion. If i understand it correctly, user will still be able to login to Presentation server but will not have access to any content using your solution approach. Did i get it right?
In my current setup, user gets authenticated against LDAP, then i extract user group for that user and assign it to GROUP. Only those users gets assigned to GROUP who have access to OBIEE. We have secured RPD and Catalogs so that user must be a member of at least one GROUP to be able to access content.
Right now, a LDAP user who is not present in OBIEE user table, is able to login to BI Presentation server but is not able to see any thing. Because user gets authenticated, but does not have any authorization rights. So far so good.
I would like to take next step, where use login to BI Presentation server is denied if user id does not exist in the OBIEE user table ( but exists in the LDAP).
Thank you -
How to enable only intel graphics/discrete graphics on T400(WxgA+), windows xp,
I got a T400 with switchabale graphics (something i dont understand). I want my 9 cells to provide as long a run as feasible
without recharging. Which mode of graphics should i set it to and how do i do it?.
My blackbox (a bit heavy for me for carrying ) is a t400 with 9 cells and a wxga+, 2gb,120GB.Edited: Sorry, missed the first time that you were on XP. The answer below is for Vista only. For XP because of op sys limitations you don't have true switchable graphics capability. You can switch between the two graphics cards during BIOS setup only. To switch, reboot turning power off, then power on and on initial screen hold F1 to enter BIOS setup. Choose config and then display, and toggle graphics between integer (energy saving) and discrete (high performance). First time you switch you may have to reboot an extra time to allow the drivers to install.
If you have the latest release of the power manager (2.42) right click on it (the battery icon) and choose switchable graphics. If you are still on 2.37 or earlier release of the power manager left click instead. Once you have found the switchable graphics option switch between the two graphics cards by choosing energy saving and high performance GRAPHICS. (NOT similar options in the normal part of the power manager.)
Here is the Lenovo switchable graphics FAQ
Message Edited by zilla on 01-25-2009 01:06 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500. -
How to enable only current row and disable others?
Hi,
We have a requirement like, the top row only should be editable in a detail block. For example,
Item No. Item Name Qty
1 Item1 1
Add Row --> button
when i click this "Add Row" button a new row should be created with editable text boxes for all 3 columns. and the existing row should become display only row.
Could you any one please tell how to do in APEX?
Thanks & Regards
M ThiyagarajanHi,
Try this link:
Re: Tabular Form Question
Regards
Rana -
How to enable only one resource profile outof 3 while disabling user in OIM
Hello,
I have 3 resource profile for AD user with 3 diffrent IT resources.
When i try to disable the user in OIM, then it disables all the resource profiles attached for that user.
I would like NOT to disable one of AD User Resource profile out of 3 .
How can I do that?
ThanksThis is the same post as one made about a week ago.
I would suggest the following:
1. Create an adapter that has an input of the domain, or some other identifying attribute. In this adapter, use logic to return a response of either DISABLE or DO_NOTHING.
2. Create a new Process Task called something like "Disable Resource Determiner". Attach your adapter you just made, and on your response codes, for DISABLE, trigger the disable task, and on DO_NOTHING, then do nothing... Set this adapter to be triggered on disable.
3. On your previous disable task, remove the disable trigger.
Now when your disable is triggered, you have logic to determine which target resource is being used, and then whether or not to disable the resource or do nothing.
-Kevin -
Hi,
I want users to be only able to copy from my textpane, I started reading about keylistener and carretlistener and got confused, I would thank some guidance to the right way.
Noanever mind
I wasn't concentrated -
setEditable(false);
setEnabled(true); -
How to enable some DFF segments on AR Trx form for specific context only
I have a requirement to enable 3 of many DFF segments on AR Transactions line DFF for particular context only. I am not able to figure out how to achieve it.
When we query for an Invoice and navigate to lines DFF I want these fields to be allowed to update. Currently they appear as read-only. These are interface line attributes used across many different contexts but I need them as update allowed only for few contexts.
I went through different forum topics and was trying to use security rules but these segments do not have the security enabled flag checked under DFF segments and when I try to check it it throws an error as to update not allowed.
Form personalization doesn't work on DFF, so that is out too.
Any help would be appreciated.
Thanks.
ShivangHi,
My requirement is a little different. We already have context and reference setup when we implemented Oracle 3 yrs back but what I need is to enable few segments / attributes inside a context that too when the invoice is queried for not when it is being created manually. The same attributes are being used by different contexts but I need to enable only for a few and not all contexts.
Appreciate if you are able to help on this.
Thanks. -
How I disable my textbox at view time and Enable only when insert or edit t
hi master
Sir i have master detail form and i am not use toolbar i am usint my button add/edit/view/next/last and other
sir my requirement is all textbox disable at view time enable ony edit or inserting time
how I disable my textbox at view time and Enable only when insert or edit time.
i use this
if :system.form_status='change' then
if :system.form_status='insert' then
if :system.form_status='execute query' then
but not right work
please give my idea where i use what statment
send me sample
AamirAamir,
Set the text item's Enabled property to False at design time. Then, using SET_ITEM_PROPERTY (see Forms Help), set to Enabled in the relevent part of the code on the WHEN-BUTTON-PRESSED triggers on your Insert and Update buttons. Similarly, disable on your Save button once the cnahges are saved etc. -
My ipad doesnt have airplay how do i activate it where is it my ipad is only a year old iv tried looking everywhere but cant find how to enable it please help
[email protected]The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues. -
How to enable a partner application for Single Sign-On?
Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthilsharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself. -
How to enable the S-Video port on a Satelite M30X-154?
Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
When I connect the cable to the laptop, nothing happens!!
HELPHi,
Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
But on mine I have a NVidia Control Panel, where I can configure dualview,
which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
When a TV is connected and not recognized, I can enforce recognition there.
On the next start of the panel, the TV is then available too.
Perhaps I could help you.
If not, note that with windows settings your TV will not be available.
Try to go to the User Interface of your graphics adapter...
Matz -
How to enable MMS without BIS
This guide is for you if:
you have an BlackBBerry OS 7 device on a regular (non-BIS) data plan
and
2. you cannot send MMS (multimedia) messages.
Getting MMS working requires you to split, hex edit, merge and install service books, so read through the instructions and decide whether you’re up to it. I’ve attempted to explain everything as clearly as possible, but it’s a complex process and requires you to follow instructions carefully.
It's worth asking your carrier if they can just enable MMS for you. If they can and will, you don't need this guide.
Notes:
The process described here may also work on earlier devices with OS 4, 5, and 6, but I don’t have those devices to test.
Many carriers require you to have a data plan in order to send MMS messages. If you don’t have one, this guide may not help you.
Depending on your cellular plan, sending MMS messages may involve extra charges.
Preparation: Before You Get Started
Software
First, you need some tools to do the work. Download and install these three programs on your computer:
MagicBerry 3.5 (here)
A Hex editor (I like HxD, here)
BlackBerry Desktop (link)
Service Books
You will also need a copy of the service books attached to post #1 in this thread over at CrackBerry. Extract the contents of the .zip file to a location of your choice.
MMS Configuration Information
Once you have the tools and service books, you need to get the MMS configuration information from your cellular carrier.
Specifically, you need three settings: MMS Proxy, MMSC, and APN. Search on Google for something like, “MMS settings for [insert your cellular carrier’s name here]” and you should find them. Note that you also need the port number for the MMS Proxy. It should be there on the settings page.
Note: if the port number for your MMS Proxy is in the 9000s, this process probably won’t work, since your cell carrier may be using the older WAP 1.2 specification. If anyone runs across this, let me know, and I’ll try to help you out.
A Note on MagicBerry
MagicBerry is an .ipd file editor. Service books, like the ones responsible for MMS, are .ipd files. The logical conclusion would be that you could edit service books with MagicBerry. But MagicBerry only shows you certain pre-set fields within the .ipd file. As a result, you can't see or edit a lot of the information in the service book. Even worse, if you do edit a service book file with MagicBerry, that unseen information is not saved, so you end up deleting it and rendering the service book useless.
MagicBerry does have good uses, though: it splits and merges service book files perfectly. In fact, it is the best tool for splitting and merging service books, which is why you downloaded a copy.
Due to MagicBerry’s limitations, you’re going to edit the files with the hex editor.
Let’s get started!
The MMS How-to Guide
Step 1: Split the .ipd Files
Start MagicBerry, click File > Open, and open the tmo_servicebooks.ipd file.
Click Manipulate > Split.
Tick the box for the MMS Config 2.0 file.
Press “Split Selected,” enter a file name (and select a directory, so you know where the file is being saved), and press “Save.” Name the file “MMS_Config_20” so that you easily recognize it.
Note: there are "MMS Config" and "MMS Config 2.0" service books in the tmo_servicebooks.ipd file. Make sure you select the 2.0 version.
Step 2: Hex Edit the MMS Config 2.0 File
Now, start your hex editor and open the “MMS_Config_20.ipd” file. It will look like this, without the highlights and bolding. I’ve added those so that it will be easier to provide instructions on editing.
Hex Editing Basics
In the HEX editor, the blue numbers don’t matter to you (they’re just column and row labels). Only the black ones are part of the file.
The bytes (the two-character pairs) on the left side are all numbers, expressed in hexadecimal or “base-16”. The same information is expressed in ANSI characters on the right side.
The basics of hexadecimal numbering are that you count as follows:
Base-16 (hexadecimal): 1 2 3 4 5 6 7 8 9 A B C D E F 10
Base-10 (decimal): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
So in the two-character byte pair, 0D = 13, 1F = 31, 50 = 80, etc. If you can figure out those conversions, you’re good. If not, google hexadecimal numbering, and spend some time at a lesson. You need to understand how hex works to do this. There are also decimal to hexadecimal converters online. Use them to check your work, or to do the conversion work for you.
You can edit the file from either side of the hex editor. As you edit the information on one side, you’ll see it automatically changing on the other as well.
It’s easier to edit the information in the green, turquoise, and red fields on the right side.
The information in the grey, yellow, and pink fields must be edited from the left (hex) side, because it’s the hex value that matters, and it shows up as periods or jibberish on the right side. All those “dots” on the right side are not identical when you look over at the left side. They’re actually very different values. The nonsensical letters on the right side are likewise meaningful values on the left side.
It’s not a bad idea to just spend some time playing around in the hex editor before you move on. When you’re done, close the file without saving it, and the changes you make while experimenting won’t be made permanent.
Editing the File
The green blocks: enter your MMS proxy in each one, with the port number following the colon. Add to or delete bytes from the highlighted field if necessary, but whatever you do, do not write over or delete bytes outside the highlighted field! Those bytes contain necessary information, and if they are not there, the service book will not work. The same rule holds true for all of the other edits. You must stay within the highlighted fields. To delete bytes, just press delete. To insert bytes, position the cursor, and go to Edit > Insert Bytes on the menu bar, and choose the number of bytes to insert. If you’re using HxD hex editor, ctrl-z will undo a mistake. It also makes your changes in red, which makes them a little easier to follow. As with all programming, the work has to be perfect. There can be no mistakes. Check everything you do carefully.
The turquoise block: enter the MMSC address here.
The red block: enter your APN here.
The yellow blocks: total number of bytes in the highlighted green, turquoise, or red range that follows. Adjust it when you’ve finished editing. The number must be expressed in HEX of course. Use a decimal to hexadecimal converter online if you prefer that.
The pink blocks: the total number of bytes in the bolded range that follow (again, in hex). Adjust it when you’re finished editing the field.
The grey block: a count of the total number of bytes that follow it. In the original file, the value is 30 01 00 00, which breaks down as: 30(hex)=48 01(hex)=256. The total (48+256) is 304. If the number of bytes following the grey block was less than 256, there would be no 01 in the second place. For example, if there were 226 bytes following the block, the grey block would look like this: E2 00 00 00. When you are finished editing the entire file, go back and adjust the number in the grey block accordingly.
Once you’re done, save the file.
Step 3: Merge the MMS Config 2.0 and Wap Push Config Service Books
Open the “MMS_Config_20.ipd” file in MagicBerry
Once you’ve opened the file, click Manipulate > Merge.
Tick the box for the MMS Config 2.0 file.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots.
Choose the tmo_servicebooks.ipd file.
Tick only the box for the “Wap Push Config” service book.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Close MagicBerry
Step 4: Backup Your Phone
This is mandatory. You’ll need the backup file for step 6.
You need to have BlackBerry Desktop installed on your computer. If you haven’t done that yet, do it.
Connect your BlackBerry device to your computer with a USB cable. If BlackBerry Desktop does not start automatically, start it.
Do a backup. Just hit “Back up now” and follow the prompts. Do a full backup. Once you’re done, go to step 5.
Step 5: Merge the combined MMS Config 2.0/Wap Push Config service book file with your existing service books
Open MagicBerry
Press File > Open and at the bottom of the Open dialogue window beside the File name box, change “IPD Files (.ipd)” to “BBB Files (.bbb)”. Navigate to the folder where you stored your backup, and open it. It might take a while to open.
Click Manipulate > Merge.
Go down the list on the left hand side and tick the checkboxes for the service book entries (they will be way down). If there are service books listed for MMS Config or Wap Push Config, uncheck those boxes.
On the right side of the “Merge” window, where it says, “Choose second IPD file,” press the button with the three dots. Choose your merged MMS Config 2.0/Wap Push Config file.
Press “Merge Selected,” enter a file name (and select the directory if necessary), and press “Save.”
Optional: You can merge the newly created file again with any other service books you may need – such as the Anworm service books for the browser mentioned in my thread on CrackBerry. Just follow the process used in step 3.
Step 6: Install the Service Books to your phone:
Connect your BlackBerry to your computer with a USB cable if it isn’t still connected.
On your BlackBerry, go to Options > Device > Advanced System Settings > Service Book
Hold down the “Alt” key and press S B E B. You should see a message that says, “Legacy SB Restore Enabled.” Press Okay.
On your computer, open BlackBerry Desktop.
Go to Device > Restore.
Press “Change” and navigate to the folder with the merged .ipd file you created. Press “OK.” You should now see the file listed in the Restore window.
Click on the merged .ipd file you created to select it.
Under the heading “Select Data to Restore,” select “Select Device Data and Settings” and then tick the box for “Service Book.” This step is really important. Make sure it's done right. If you screw it up you could end up wiping a lot of settings and data.
Press “Restore” and answer “Yes” to the confirmation dialogue.
Close the BlackBerry Desktop software, disconnect your device, and do a battery pull to reboot.
Voila! If everything went well, you should have MMS capabilities. Test your ability to send and receive multimedia by sending yourself a picture message. You should receive the message within about 10 seconds.
If it doesn’t work, go back and make sure EVERYTHING in the file is done perfectly. If you find a problem, fix it, merge the files again, and reinstall the service books.
Solved!
Go to Solution.Why not just ask carrier to enable MMS? I know T-Mobile can and will do it, even if there is no data plan at all on the line. We did it for my daughter and I know T-Mobile has done it for others. I assume other carriers do the same, but don't know....Which is why I ask.
- Ira -
How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!
2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PMHi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
vendor: LENOVO
physical id: 0
version: 68ET35WW (04/16/2008)
size: 106KiB
capacity: 960KiB
capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards -
How to enable the widgets in Indesign CC..?
Hi,
I am working on porting our Indesign CS6 plugin to Indesign CC plugin.I have completed the porting and the plugins has opened in Indesign CC,but i have one problem in design. Three of our Widgets has not opened in Indesign CC.
The code is the following,
.fr file
resource SampleDialogWidget (kSDKDefDialogResourceID + index_enUS)
__FILE__, __LINE__,
kSampleDialogWidgetID, // WidgetID
kPMRsrcID_None, // RsrcID
kBindNone, // Binding
0, 0, 700,400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
kSampleDialogTitleKey, // Dialog name
//<FREDDYWIDGETDEFLISTUS>
SamplePrefListBox
SamplePreflistboxWidgetID,
kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
kBindAll, // Frame binding
Frame(15,15,170,360) // Frame
kTrue, kTrue, // Visible, Enabled
1,0, // List dimensions
19, // Cell height
1, // Border width
kFalse,kTrue, // Has scroll bar (h,v)
kTrue, // Multiselection
kTrue, // List items can be reordered
kTrue, // Draggable to new/delete buttons
kTrue, // Drag/Dropable to other windows
kTrue, // An item always has to be selected
kFalse, // Don't notify on reselect
kSamplePrefListElementRsrcID // Fill list box with widgets with this ID (default is 0)
CellPanelWidget
kCellPanelWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
kBindAll, // Frame binding
Frame(-1,1,154,340) // Frame
kTrue, kTrue // Visible, Enabled
// ----- This is the CPanelControlData that holds the widgets
// that are items in the list box. They are not persistent
GenericPanelWithBorderWidget
SamplePrefGeneralTabWidgetID, kPMRsrcID_None,
kBindBottom |kBindRight,
Frame(175,10,695,360) // Frame
kTrue, kTrue,
StaticTextWidget
kInvalidWidgetID, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 15, 138, 35, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
kSamplePrefProjectPathStringKey, // Initial text.
kSamplePrefProjectPathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
kSamplePrefProjectPathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 15, 420, 35), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
kSampleChooseProjectButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 15, 500, 35,
kTrue, kTrue,
kSampleChooseBtnStringKey,
GenericPanelWithBorderWidget
SamplePrefFittingTabWidgetID, kPMRsrcID_None,
kBindBottom |kBindRight,
Frame(175,10,695,360) // Frame
kTrue, kTrue,
StaticTextWidget
kInvalidWidgetID, // WidgetId
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame( 10,15,300,35 ), // Frame (l,t,r,b)
kTrue, kTrue, kAlignLeft, // Visible, Enabled, Alignment
kDontEllipsize,kTrue, //**new element in InDesign 2.0: don't add any ellipses
"Drag/Drop Operation", // Text
0// WidgetId for associated control for shortcut focus
SeparatorWidget
0,
kPMRsrcID_None,
kBindNone,
Frame(10,37,450,38),
kTrue,kTrue,
StaticTextWidget
0, // WidgetId
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame( 10, 40, 250, 60 ), // Frame (l,t,r,b)
kTrue, kTrue, kAlignLeft, // Visible, Enabled, Alignment
kDontEllipsize,kTrue, //**new element in InDesign 2.0: don't add any ellipses
kSampleTextOptionsTextKey, // Text
0 // WidgetId for associated control for shortcut focus
CheckBoxWidget
kSampleTextFitCheckBoxWidgetID, // WidgetId
kSysCheckBoxPMRsrcId, // RsrcId
kBindNone,
Frame(150, 40, 350, 60) // left, top, right, bottom
kTrue, // Visible
kTrue, // Enabled
kAlignLeft, // Alignment
kSampleTextFitChkBoxTextKey // Initial text
GenericPanelWithBorderWidget
SamplePrefScriptEventsTabWidgetID, kPMRsrcID_None,
kBindBottom |kBindRight,
Frame(175,10,695,360) // Frame
kTrue, kTrue,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 10, 200, 30, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
kSampleDropDownEventsTextKey, // Initial text.
0 // No associated widget
SamplePrefListBox
SamplePrefDragDropScriptlistboxWidgetID, kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
kBindAll, // Frame binding
Frame(10, 35, 200, 120) // Frame
kTrue, kTrue, // Visible, Enabled
1,0, // List dimensions
19, // Cell height
1, // Border width
kFalse,kTrue, // Has scroll bar (h,v)
kTrue, // Multiselection
kTrue, // List items can be reordered
kTrue, // Draggable to new/delete buttons
kFalse, // Drag/Dropable to other windows
kTrue, // An item always has to be selected
kFalse, // Don't notify on reselect
k SamplePrefListElementRsrcID // Fill list box with widgets with this ID (default is 0)
CellPanelWidget
kCellPanelWidgetID, kPMRsrcID_None, // WidgetId, RsrcId
kBindAll, // Frame binding
Frame(-1,1,187,243) // Frame
kTrue, kTrue // Visible, Enabled
// ----- This is the CPanelControlData that holds the widgets
// that are items in the list box. They are not persistent
ButtonWidget
SamplePrefDragDropScriptAddBtnWidgetID,
kSysButtonPMRsrcId,
kBindNone,
20, 125, 90, 145,
kTrue, kTrue,
kSampleAddScriptButtonTextKey,
ButtonWidget
SamplePrefDragDropScriptRemoveBtnWidgetID,
kSysButtonPMRsrcId,
kBindNone,
100, 125, 180, 145,
kTrue, kTrue,
kSampleRemoveScriptButtonTextKey,
Elements added:
void SampleDialogController::PopulatePrefListElement()
do
InterfacePtr<IPanelControlData> iPanelControlData(this, UseDefaultIID());
ASSERT(iPanelControlData);
if(!iPanelControlData) {CAlert::InformationAlert("IPanelControlData err");break;}
SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, SamplePreflistboxWidgetID, kSampletDialogWidgetID);
IControlView * listBox = listHelper.FindCurrentListBox();
if(listBox == nil) {
CAlert::InformationAlert("listBox err");
break;
listHelper.EmptyCurrentListBox();
InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER); // useDefaultIID() not defined for this interface
ASSERT_MSG(listCntl != nil, "listCntl nil");
if(listCntl == nil) {
CAlert::InformationAlert("IListBoxController err");
break;
//Addin the string to the listbox
const int targetDisplayWidgetId =SamplePrefOptionTextWidgetID;
listHelper.AddElement("General", targetDisplayWidgetId);
listHelper.AddElement("Fitting", targetDisplayWidgetId);
listHelper.AddElement("Events and Scripts", targetDisplayWidgetId);
listCntl->DeselectAll();
}while(0);
I dont know how to enable these three widgets in Indesign CC.please refer this code and help me if anyone has idea regarding this problem.
Thanks in advance,
Vimala LHi,
As per ur suggestion,i have done the below changes
.fr file:
type SamplePrefListBox
(kViewRsrcType) : StdListBoxWidgetN
(ClassID = kStdListBoxWidgetNewBoss)
Class
kSamplePrefListBoxWidgetBoss,
kStdListBoxWidgetNewBoss,
IID_IOBSERVER,kSamplePrefListBoxObserverImpl,
resource SampleDialogWidget (kSDKDefDialogResourceID + index_enUS)
__FILE__, __LINE__,
kSampleDialogWidgetID, // WidgetID
kPMRsrcID_None, // RsrcID
kBindNone, // Binding
0, 0, 700,400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
kSampleDialogTitleKey, // Dialog name
//<FREDDYWIDGETDEFLISTUS>
SamplePrefListBox
SamplePreflistboxWidgetID,
kSysOwnerDrawListBoxPMRsrcId, // WidgetId, RsrcId
kBindAll, // Frame binding
Frame(15,15,170,360) // Frame
kTrue, kTrue, // Visible, Enabled
kTrue, //Erase before draw
kInterfacePaletteFill, //Interface color
1,0, // List dimensions
19, // Cell height
1, // Border width
kFalse,kTrue, // Has scroll bar (h,v)
kTrue, // Multiselection
kTrue, // List items can be reordered
kTrue, // Draggable to new/delete buttons
kTrue, // Drag/Dropable to other windows
kTrue, // An item always has to be selected
kFalse, // Don't notify on reselect
0,
0,
kFalse, // Display root node
kFalse, // Use Horizontal scroll bar
kTrue, // Use vertical scroll bar
19, // Vertical scroll button increment
1, // Vertical thumb scroll increment
0, // Horizontal scroll button increment
0, // Horizontal thumb scroll increment
1, // Items selectable 1 = Single selection
kFalse, // Allow children from multibler parents to be selected
kTrue //, // Allow discontiguous selection
I got error...,error R32745: # Error: Expected ')'
SamplePrefListBoxObserver file:
void SamplePrefListBoxObserver::AutoAttach()
InterfacePtr<ISubject> subject(this, UseDefaultIID());
if (subject != nil)
subject->AttachObserver(this, IID_ILISTCONTROLDATA);
void SamplePrefListBoxObserver::AutoDetach()
InterfacePtr<ISubject> subject(this, UseDefaultIID());
if (subject != nil)
subject->DetachObserver(this, IID_ILISTCONTROLDATA);
void SamplePrefListBoxObserver::Update(const ClassID& theChange,ISubject* theSubject,const PMIID &protocol,void* changedBy)
do {
InterfacePtr<IPanelControlData> iPanelControlData(this, UseDefaultIID());
if(!iPanelControlData)
{CAlert::InformationAlert("iPanelControlData err");break;}
InterfacePtr<IWidgetParent> iWidgetParent(this, UseDefaultIID());
ASSERT(iWidgetParent);
if(!iWidgetParent)
{CAlert::InformationAlert("iWidgetParent err");break;}
InterfacePtr<IPanelControlData> iPanelControlDataDialog(
(IPanelControlData*)iWidgetParent->QueryParentFor(IID_IPANELCONTROLDATA) );
if(!iPanelControlDataDialog)
{CAlert::InformationAlert("iPanelControlDataDialog err");break;}
InterfacePtr<IControlView> view(theSubject, UseDefaultIID()) ;
if (view == nil)
{CAlert::InformationAlert("Can't find the panel control view");break;}
if (view->GetWidgetID() != SamplePreflistboxWidgetID)
if(view->GetWidgetID() == SamplePrefDragDropScriptlistboxWidgetID)
this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
else if(view->GetWidgetID() == SamplePrefUpdateScriptlistboxWidgetID)
this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
else if(view->GetWidgetID() == SamplePrefImportScriptlistboxWidgetID)
this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefAutoFlowScriptlistboxWidgetID);
else if(view->GetWidgetID() == SamplePrefAutoFlowScriptlistboxWidgetID)
this->DeSelectList(iPanelControlDataDialog,SamplePrefDragDropScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefUpdateScriptlistboxWidgetID);
this->DeSelectList(iPanelControlDataDialog,SamplePrefImportScriptlistboxWidgetID);
if ((protocol == IID_ILISTCONTROLDATA) && (theChange == kListSelectionChangedByUserMessage) )
if (view->GetWidgetID() ==SamplePreflistboxWidgetID)
IControlView* generaltab = iPanelControlDataDialog->FindWidget(SamplePrefGeneralTabWidgetID);
if(!generaltab)
{CAlert::InformationAlert("generaltab err");break;}
IControlView* fittingTab = iPanelControlDataDialog->FindWidget(SamplePrefFittingTabWidgetID);
if(!fittingTab)
{CAlert::InformationAlert("fittingTab err");break;}
IControlView* scriptEventTab = iPanelControlDataDialog->FindWidget(SamplePrefScriptEventsTabWidgetID);
SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, SamplePreflistboxWidgetID, kSampleDialogWidgetID);
IControlView * listBox = listHelper.FindCurrentListBox();
if(listBox == nil){CAlert::InformationAlert("listBox err");break;}
InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER);
if(listCntl == nil) {break;}
int32 Selindex = listCntl->GetSelected();
if(Selindex!=-1){
InterfacePtr<IPanelControlData> panelControlData1(listBox, UseDefaultIID());
if(!panelControlData1) {break;}
IControlView* cellPanelview = panelControlData1->FindWidget(kCellPanelWidgetID);
InterfacePtr<IPanelControlData> panelControlData2(cellPanelview, UseDefaultIID());
if(!panelControlData2) {break;}
IControlView* cellView = panelControlData2->GetWidget(Selindex);
InterfacePtr<IPanelControlData> panelControlData3(cellView, UseDefaultIID());
if(!panelControlData2) {break;}
IControlView* textView = panelControlData3->FindWidget(SamplePrefOptionTextWidgetID);
InterfacePtr<ITextControlData> cellText (textView, UseDefaultIID());
PMString selectedItem = cellText->GetString();
if(selectedItem=="General")
generaltab->ShowView();
fittingTab->HideView();
scriptEventTab->HideView();
else if(selectedItem=="Fitting Options")
generaltab->HideView();
fittingTab->ShowView();
scriptEventTab->HideView();
else if(selectedItem=="Events and Scripts")
generaltab->HideView();
fittingTab->HideView();
scriptEventTab->ShowView();
} while(0);
void SamplePrefListBoxObserver::DeSelectList(IPanelControlData* iPanelControlData,WidgetID listBoxWidgetID)
do
SDKListBoxHelper listHelper(iPanelControlData,kSamplePluginID, listBoxWidgetID, kSamplePanelWidgetID);
IControlView * listBox = listHelper.FindCurrentListBox();
if(listBox == nil) {
CAlert::InformationAlert("listBox err");
break;
InterfacePtr<IListBoxController> listCntl(listBox,IID_ILISTBOXCONTROLLER); // useDefaultIID() not defined for this interface
ASSERT_MSG(listCntl != nil, "listCntl nil");
if(listCntl == nil) {
CAlert::InformationAlert("IListBoxController err");
break;
listCntl->DeselectAll(kTrue,kFalse);
}while(0);
please refer the above code and help me to develop the plugin.
We have used the SDKListBoxHelper file in our plugin.If it works in Indesign CC?
Thanks,
Vimala L -
Hi im trying to connect to itunes and i cant figure out how to enable it
my ipod is disabled and it says to cunnect to itunes and i cant figure it out how to enable it. HELP ME
It's possible that you've tried the password too many times and you're locked out.
Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
Maybe you are looking for
-
Cannot transfer mailbox from Exchange 2007 to Exchange 2013
Error message I get is below: Any one got the same issue? It was working fine a few days ago,suddenly cannot move mailboxes. -Tried to create another database in case it has a limit: same issue -tried to move from GUI and shell same issue. MigrationT
-
Install of WAS 6.40 java on windows no windows services created
We are trying to install a NW04 SR1 WAS on windows. The latest Install Master CD download now requires Oracle 10. The Oracle 10 install is the first part of the install process. The Note number 949116 says to use the procedure for the Oracle install
-
RSA SecurID Software Token for Nokia
Hi C7-00 is on the symbian^3 platform, which is the same as N8 & E7. While SecurID Software Token for nokia is qualified for N8 & E7, why is it not qualified for C7? They are all on the same platform (Symbian^3) !! When can it be qualified?
-
A very usable portrait mode for N900!
I just found this, some of you probably already know about it. Download ShortcutD from the maemo repo, then go to settings and ShortcutD. In there you can use camera button or proximity sensor (i originally set caera button but found proximity senso
-
HI FRNDS, HOW R U would u plz send me about the ROLL OUT means, what is mean of EDI,ALE,IDOCs&BAPI. what is the difference of these things& what is the use of these things thank u with regards nagesh