How to enable only intel graphics/discrete graphics on T400(WxgA+), windows xp,

I got a T400 with switchabale graphics (something i dont understand). I want my 9 cells to provide as long a run as feasible
without recharging. Which mode of graphics should i set it to and how do i do it?.
My blackbox (a bit heavy for me for carrying ) is a t400 with 9 cells and a wxga+, 2gb,120GB.

Edited: Sorry, missed the first time that you were on XP. The answer below is for Vista only. For XP because of op sys limitations you don't have true switchable graphics capability. You can switch between the two graphics cards during BIOS setup only. To switch, reboot turning power off, then power on and on initial screen hold F1 to enter BIOS setup. Choose config and then display, and toggle graphics between integer (energy saving) and discrete (high performance). First time you switch you may have to reboot an extra time to allow the drivers to install.
If you have the latest release of the power manager (2.42) right click on it (the battery icon) and choose switchable graphics. If you are still on 2.37 or earlier release of the power manager left click instead. Once you have found the switchable graphics option switch between the two graphics cards by choosing energy saving and high performance GRAPHICS. (NOT similar options in the normal part of the power manager.)
Here is the Lenovo switchable graphics FAQ
Message Edited by zilla on 01-25-2009 01:06 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Similar Messages

How to enable only 3G

I see that there is no option to disable 3G alone in iPhone 4s. Is there a way to do just the opposite ? ( enable only 3G, disable 2g and edge and GPRS ). OS VERSION - 5.0.1

No.

How to enable only a subset of LDAP users to be able to login to OBIEE

We have enabled LDAP authentication. Now every single LDAP user can login to Presentation server. That is an issue. Not all LDAP users are OBIEE users. Only a small subset of the LDAP users should be able to access OBIEE. We have a database table that lists all OBIEE users. This table however does not have user password information. User Password information is stored in the LDAP.
so question is how do we limit OBIEE access to only OBIEE users and not all LDAP users.
Thank you

Thanks for your suggestion. If i understand it correctly, user will still be able to login to Presentation server but will not have access to any content using your solution approach. Did i get it right?
In my current setup, user gets authenticated against LDAP, then i extract user group for that user and assign it to GROUP. Only those users gets assigned to GROUP who have access to OBIEE. We have secured RPD and Catalogs so that user must be a member of at least one GROUP to be able to access content.
Right now, a LDAP user who is not present in OBIEE user table, is able to login to BI Presentation server but is not able to see any thing. Because user gets authenticated, but does not have any authorization rights. So far so good.
I would like to take next step, where use login to BI Presentation server is denied if user id does not exist in the OBIEE user table ( but exists in the LDAP).
Thank you

How to enable only current row and disable others?

Hi,
We have a requirement like, the top row only should be editable in a detail block. For example,
Item No. Item Name Qty
1 Item1 1
Add Row --> button
when i click this "Add Row" button a new row should be created with editable text boxes for all 3 columns. and the existing row should become display only row.
Could you any one please tell how to do in APEX?
Thanks & Regards
M Thiyagarajan

Hi,
Try this link:
Re: Tabular Form Question
Regards
Rana

How to enable SLAT/Intel EPT on MSI CX61 0OL-696US

I have an CX61 0OL-696US running Windows 8.1 Pro and am wanting to run a linux distro via Microsoft Hyper-V however, from what I've read, I need SLAT/Intel EPT enabled, but I can not find a means to enable this. According to the Intel site, my processor supports VT-x and VT-x with EPT, but running the SysInternals CoreInfo.exe shows that EPT is not enabled and I can't find anywhere in the BIOS to enable it.
Anyone have any ideas?
I know I can run Ubuntu via VMWare, but I'm not wanting to install another application if I can pull this off with Windows Hyper-V.

louwho wrote:
I have VMware workstation installed. I do not have any VMWare VM's running. This cannot be causing me any problems can it?
I don't know. I do know that on all the machines I have tested with, enabling Hyper-V breaks VMWare. VMWare will think that VT is turned off in BIOS.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to enable only one resource profile outof 3 while disabling user in OIM

Hello,
I have 3 resource profile for AD user with 3 diffrent IT resources.
When i try to disable the user in OIM, then it disables all the resource profiles attached for that user.
I would like NOT to disable one of AD User Resource profile out of 3 .
How can I do that?
Thanks

This is the same post as one made about a week ago.
I would suggest the following:
1. Create an adapter that has an input of the domain, or some other identifying attribute. In this adapter, use logic to return a response of either DISABLE or DO_NOTHING.
2. Create a new Process Task called something like "Disable Resource Determiner". Attach your adapter you just made, and on your response codes, for DISABLE, trigger the disable task, and on DO_NOTHING, then do nothing... Set this adapter to be triggered on disable.
3. On your previous disable task, remove the disable trigger.
Now when your disable is triggered, you have logic to determine which target resource is being used, and then whether or not to disable the resource or do nothing.
-Kevin

How to enable only copy

Hi,
I want users to be only able to copy from my textpane, I started reading about keylistener and carretlistener and got confused, I would thank some guidance to the right way.
Noa

never mind
I wasn't concentrated -
setEditable(false);
setEnabled(true);

How To Install Only DAC Client 10.1.3.4.1 on Windows Client Machine

Hi,
I want to install ONLY the DAC 10.1.3.4.1 client on my Windows client machine.
However, when I launch the Oracle Universal Installer the install options are greyed out and I'm forced to install both the Client and Server products.
I don't want to do this.
Please suggest me how do I go about this issue.
Thanks.

In version 7.9.5.1 the instructions say to:
You must satisfy the following requirements on the machine on which you want to
install an additional DAC Client:
■ JDK 1.5 or higher must be installed. For more information, see Section 4.3.4.5,
"Download and Install the Java JDK".
■ The appropriate ODBC database connection must be created on the machine. For
more information, see Section 4.3.4.3, "Create ODBC Database Connections".
■ Download the Hibernate files from the Hibernate Web site. For more information,
see Section 4.3.4.6, "Download Hibernate Libraries".
To install an additional instance of the DAC Client on Windows
1. Copy the \OracleBI\DAC\ directory and its subfolders from the Oracle BI
Applications installation (on Windows) to the target Windows machine (for
example, to a directory called \DAC\).
2. Copy the \OracleBI\dwrep\ directory and its subfolders from the Oracle BI
Applications installation (on Windows) to the target Windows machine.
Note: Alternatively, if the target machine already has Oracle Business Intelligence
Enterprise Edition installed, you can run the Oracle BI Applications installer on the
target machine to install the DAC Client. For information about how to run the Oracle
BI Applications installer, see Section 4.4, "Running the Oracle BI Applications Installer
on Windows."
I haven't attempted this with the 7.9.6 version yet. Nor have I reviewed the documentation to see if it is mentioned as an alternative.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Dual graphics - I cant run radeon, only intel.

I have laptop Lenovo G510. It has integrated Intel graphics card and Radeon HD 8570M. I wanted use only radeon (with xf86-video-radeon), but only drivers for intel (xf86-video-intel) working.
[x@arch64 ~]$ lspci | grep -e VGA -e 3D
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
[x@arch64 ~]$ xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 4 associated providers: 0 name:Intel
[x@arch64 ~]$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5)
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun PRO [Radeon HD 8570A/8570M] (rev ff)
08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
09:00.0 Ethernet controller: Qualcomm Atheros QCA8172 Fast Ethernet (rev 10)
Xorg log - /var/log/Xorg.0.log
[ 12.180]
X.Org X Server 1.16.3
Release Date: 2014-12-20
[ 12.180] X Protocol Version 11, Revision 0
[ 12.180] Build Operating System: Linux 3.18.1-1-ARCH x86_64
[ 12.180] Current Operating System: Linux arch64 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 12.180] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=88812dc3-c3ed-4c5a-9b28-cd5c31b67767 rootfstype=btrfs rw rootflags=rw,relatime,compress=lzo,space_cache,autodefrag cgroup_disable=memory
[ 12.180] Build Date: 29 December 2014 01:09:58PM
[ 12.180]
[ 12.180] Current version of pixman: 0.32.6
[ 12.180] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.180] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.181] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 31 00:43:45 2014
[ 12.200] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.200] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 12.200] (==) No Layout section. Using the first Screen section.
[ 12.200] (==) No screen section available. Using defaults.
[ 12.200] (**) |-->Screen "Default Screen Section" (0)
[ 12.200] (**) | |-->Monitor "<default monitor>"
[ 12.200] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.200] (==) Automatically adding devices
[ 12.200] (==) Automatically enabling devices
[ 12.200] (==) Automatically adding GPU devices
[ 12.239] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.239] Entry deleted from font path.
[ 12.274] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.274] Entry deleted from font path.
[ 12.274] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.274] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.274] Entry deleted from font path.
[ 12.274] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.274] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.274] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.274] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.274] (II) Loader magic: 0x818d80
[ 12.274] (II) Module ABI versions:
[ 12.274] X.Org ANSI C Emulation: 0.4
[ 12.274] X.Org Video Driver: 18.0
[ 12.274] X.Org XInput driver : 21.0
[ 12.274] X.Org Server Extension : 8.0
[ 12.275] (EE) systemd-logind: failed to get session: PID 262 does not belong to any known session
[ 12.275] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 12.275] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 12.277] (--) PCI:*(0:0:2:0) 8086:0406:17aa:3801 rev 6, Mem @ 0xb9000000/4194304, 0xa0000000/268435456, I/O @ 0x00005000/64
[ 12.277] (--) PCI: (0:1:0:0) 1002:6663:17aa:3801 rev 0, Mem @ 0xb0000000/134217728, 0xb8000000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 12.277] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.277] (II) LoadModule: "glx"
[ 12.296] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.518] (II) Module glx: vendor="X.Org Foundation"
[ 12.518] compiled for 1.16.3, module version = 1.0.0
[ 12.518] ABI class: X.Org Server Extension, version 8.0
[ 12.518] (==) AIGLX enabled
[ 12.518] (==) Matched intel as autoconfigured driver 0
[ 12.518] (==) Matched ati as autoconfigured driver 1
[ 12.518] (==) Matched intel as autoconfigured driver 2
[ 12.518] (==) Matched modesetting as autoconfigured driver 3
[ 12.518] (==) Matched fbdev as autoconfigured driver 4
[ 12.518] (==) Matched vesa as autoconfigured driver 5
[ 12.518] (==) Assigned the driver to the xf86ConfigLayout
[ 12.518] (II) LoadModule: "intel"
[ 12.531] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.582] (II) Module intel: vendor="X.Org Foundation"
[ 12.582] compiled for 1.16.3, module version = 2.99.917
[ 12.582] Module class: X.Org Video Driver
[ 12.582] ABI class: X.Org Video Driver, version 18.0
[ 12.582] (II) LoadModule: "ati"
[ 12.615] (WW) Warning, couldn't open module ati
[ 12.615] (II) UnloadModule: "ati"
[ 12.615] (II) Unloading ati
[ 12.615] (EE) Failed to load module "ati" (module does not exist, 0)
[ 12.615] (II) LoadModule: "modesetting"
[ 12.616] (WW) Warning, couldn't open module modesetting
[ 12.616] (II) UnloadModule: "modesetting"
[ 12.616] (II) Unloading modesetting
[ 12.616] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 12.616] (II) LoadModule: "fbdev"
[ 12.616] (WW) Warning, couldn't open module fbdev
[ 12.616] (II) UnloadModule: "fbdev"
[ 12.616] (II) Unloading fbdev
[ 12.616] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 12.616] (II) LoadModule: "vesa"
[ 12.616] (WW) Warning, couldn't open module vesa
[ 12.616] (II) UnloadModule: "vesa"
[ 12.616] (II) Unloading vesa
[ 12.616] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 12.616] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 12.617] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 12.617] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 12.617] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 12.617] (++) using VT number 1
[ 12.617] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
[ 12.617] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 12.617] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 12.617] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.617] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.617] (==) intel(0): RGB weight 888
[ 12.617] (==) intel(0): Default visual is TrueColor
[ 12.617] (II) intel(0): Output eDP1 has no monitor section
[ 12.617] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 12.617] (II) intel(0): Enabled output eDP1
[ 12.617] (II) intel(0): Output VGA1 has no monitor section
[ 12.617] (II) intel(0): Enabled output VGA1
[ 12.617] (II) intel(0): Output HDMI1 has no monitor section
[ 12.617] (II) intel(0): Enabled output HDMI1
[ 12.617] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 12.617] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 12.618] (II) intel(0): Enabled output VIRTUAL1
[ 12.618] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[ 12.618] (==) intel(0): TearFree disabled
[ 12.618] (==) intel(0): DPI set to (96, 96)
[ 12.618] (II) Loading sub module "dri2"
[ 12.618] (II) LoadModule: "dri2"
[ 12.618] (II) Module "dri2" already built-in
[ 12.618] (II) Loading sub module "present"
[ 12.618] (II) LoadModule: "present"
[ 12.618] (II) Module "present" already built-in
[ 12.618] (==) Depth 24 pixmap format is 32 bpp
[ 12.618] (II) intel(0): SNA initialized with Haswell (gen7.5, gt1) backend
[ 12.618] (==) intel(0): Backing store enabled
[ 12.618] (==) intel(0): Silken mouse enabled
[ 12.618] (II) intel(0): HW Cursor enabled
[ 12.618] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.618] (==) intel(0): DPMS enabled
[ 12.618] (==) intel(0): display hotplug detection enabled
[ 12.618] (II) intel(0): [DRI2] Setup complete
[ 12.618] (II) intel(0): [DRI2] DRI driver: i965
[ 12.618] (II) intel(0): [DRI2] VDPAU driver: i965
[ 12.618] (II) intel(0): direct rendering: DRI2 enabled
[ 12.618] (II) intel(0): hardware support for Present enabled
[ 12.618] (--) RandR disabled
[ 12.803] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.803] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.803] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.803] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 12.803] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.803] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 12.803] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 12.803] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 12.803] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.803] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 12.803] (II) AIGLX: Loaded and initialized i965
[ 12.803] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.804] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 12.813] (II) intel(0): Setting screen physical size to 361 x 203
[ 13.033] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.033] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.033] (**) Power Button: Applying InputClass "keyboard-layout"
[ 13.033] (II) LoadModule: "evdev"
[ 13.033] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.050] (II) Module evdev: vendor="X.Org Foundation"
[ 13.050] compiled for 1.16.2, module version = 2.9.1
[ 13.050] Module class: X.Org XInput Driver
[ 13.050] ABI class: X.Org XInput driver, version 21.0
[ 13.050] (II) Using input driver 'evdev' for 'Power Button'
[ 13.050] (**) Power Button: always reports core events
[ 13.050] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 13.050] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.050] (--) evdev: Power Button: Found keys
[ 13.050] (II) evdev: Power Button: Configuring as keyboard
[ 13.050] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 13.050] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.050] (**) Option "xkb_rules" "evdev"
[ 13.050] (**) Option "xkb_model" "pc104"
[ 13.050] (**) Option "xkb_layout" "pl"
[ 13.079] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 13.079] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.079] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 13.079] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.079] (**) Video Bus: always reports core events
[ 13.079] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 13.079] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.079] (--) evdev: Video Bus: Found keys
[ 13.079] (II) evdev: Video Bus: Configuring as keyboard
[ 13.079] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 13.079] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.079] (**) Option "xkb_rules" "evdev"
[ 13.079] (**) Option "xkb_model" "pc104"
[ 13.079] (**) Option "xkb_layout" "pl"
[ 13.079] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 13.079] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.079] (**) Power Button: Applying InputClass "keyboard-layout"
[ 13.079] (II) Using input driver 'evdev' for 'Power Button'
[ 13.079] (**) Power Button: always reports core events
[ 13.079] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 13.079] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 13.079] (--) evdev: Power Button: Found keys
[ 13.079] (II) evdev: Power Button: Configuring as keyboard
[ 13.079] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[ 13.079] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 13.080] (**) Option "xkb_rules" "evdev"
[ 13.080] (**) Option "xkb_model" "pc104"
[ 13.080] (**) Option "xkb_layout" "pl"
[ 13.080] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 13.080] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.080] (**) Video Bus: Applying InputClass "keyboard-layout"
[ 13.080] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.080] (**) Video Bus: always reports core events
[ 13.080] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 13.080] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 13.080] (--) evdev: Video Bus: Found keys
[ 13.080] (II) evdev: Video Bus: Configuring as keyboard
[ 13.080] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:42/LNXVIDEO:00/input/input3/event3"
[ 13.080] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 13.080] (**) Option "xkb_rules" "evdev"
[ 13.080] (**) Option "xkb_model" "pc104"
[ 13.080] (**) Option "xkb_layout" "pl"
[ 13.080] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 13.080] (II) No input driver specified, ignoring this device.
[ 13.080] (II) This device may have been added with another device file.
[ 13.081] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[ 13.081] (II) No input driver specified, ignoring this device.
[ 13.081] (II) This device may have been added with another device file.
[ 13.081] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event9)
[ 13.081] (II) No input driver specified, ignoring this device.
[ 13.081] (II) This device may have been added with another device file.
[ 13.081] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event10)
[ 13.081] (II) No input driver specified, ignoring this device.
[ 13.081] (II) This device may have been added with another device file.
[ 13.081] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 13.081] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 13.081] (**) Lenovo EasyCamera: Applying InputClass "keyboard-layout"
[ 13.081] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 13.081] (**) Lenovo EasyCamera: always reports core events
[ 13.081] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event16"
[ 13.081] (--) evdev: Lenovo EasyCamera: Vendor 0xbda Product 0x5728
[ 13.081] (--) evdev: Lenovo EasyCamera: Found keys
[ 13.081] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 13.081] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input19/event16"
[ 13.081] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 10)
[ 13.081] (**) Option "xkb_rules" "evdev"
[ 13.081] (**) Option "xkb_model" "pc104"
[ 13.081] (**) Option "xkb_layout" "pl"
[ 13.082] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 13.082] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 13.082] (**) Logitech USB Receiver: Applying InputClass "keyboard-layout"
[ 13.082] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 13.082] (**) Logitech USB Receiver: always reports core events
[ 13.082] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 13.082] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 13.082] (--) evdev: Logitech USB Receiver: Found keys
[ 13.082] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 13.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C517.0001/input/input8/event6"
[ 13.082] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 13.082] (**) Option "xkb_rules" "evdev"
[ 13.082] (**) Option "xkb_model" "pc104"
[ 13.082] (**) Option "xkb_layout" "pl"
[ 13.082] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 13.082] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 13.082] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 13.082] (**) Logitech USB Receiver: Applying InputClass "keyboard-layout"
[ 13.082] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 13.082] (**) Logitech USB Receiver: always reports core events
[ 13.082] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 13.082] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 13.082] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 13.082] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 13.082] (--) evdev: Logitech USB Receiver: Found relative axes
[ 13.082] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 13.082] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 13.082] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 13.082] (--) evdev: Logitech USB Receiver: Found keys
[ 13.082] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 13.082] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 13.082] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 13.082] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 13.082] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C517.0002/input/input9/event7"
[ 13.082] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 12)
[ 13.082] (**) Option "xkb_rules" "evdev"
[ 13.082] (**) Option "xkb_model" "pc104"
[ 13.082] (**) Option "xkb_layout" "pl"
[ 13.083] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 13.083] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 13.083] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 13.083] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 13.083] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 13.083] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 13.083] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 13.083] (**) Logitech USB Receiver: Applying InputClass "keyboard-layout"
[ 13.083] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 13.083] (**) Logitech USB Receiver: always reports core events
[ 13.083] (**) evdev: Logitech USB Receiver: Device: "/dev/input/mouse0"
[ 13.083] (EE) evdev: Logitech USB Receiver: Unable to query fd: Inappropriate ioctl for device
[ 13.136] (EE) PreInit returned 2 for "Logitech USB Receiver"
[ 13.136] (II) UnloadModule: "evdev"
[ 13.137] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 13.137] (II) No input driver specified, ignoring this device.
[ 13.137] (II) This device may have been added with another device file.
[ 13.137] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 13.137] (II) No input driver specified, ignoring this device.
[ 13.137] (II) This device may have been added with another device file.
[ 13.137] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[ 13.137] (II) No input driver specified, ignoring this device.
[ 13.137] (II) This device may have been added with another device file.
[ 13.137] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event14)
[ 13.137] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 13.137] (**) Ideapad extra buttons: Applying InputClass "keyboard-layout"
[ 13.137] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 13.137] (**) Ideapad extra buttons: always reports core events
[ 13.137] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event14"
[ 13.137] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 13.137] (--) evdev: Ideapad extra buttons: Found keys
[ 13.137] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 13.137] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input16/event14"
[ 13.137] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[ 13.137] (**) Option "xkb_rules" "evdev"
[ 13.137] (**) Option "xkb_model" "pc104"
[ 13.137] (**) Option "xkb_layout" "pl"
[ 13.138] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 13.138] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.138] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-layout"
[ 13.138] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.138] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.138] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 13.138] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 13.138] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 13.138] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.138] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 13.138] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 13.138] (**) Option "xkb_rules" "evdev"
[ 13.138] (**) Option "xkb_model" "pc104"
[ 13.138] (**) Option "xkb_layout" "pl"
[ 13.138] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event17)
[ 13.138] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 13.138] (II) Using input driver 'evdev' for 'ETPS/2 Elantech Touchpad'
[ 13.138] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 13.138] (**) evdev: ETPS/2 Elantech Touchpad: Device: "/dev/input/event17"
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Found 3 mouse buttons
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute axes
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute multitouch axes
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Found x and y absolute axes
[ 13.138] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute touchpad.
[ 13.138] (II) evdev: ETPS/2 Elantech Touchpad: Configuring as touchpad
[ 13.138] (**) evdev: ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
[ 13.138] (**) evdev: ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.138] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input17/event17"
[ 13.138] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 13.138] (II) evdev: ETPS/2 Elantech Touchpad: initialized for absolute axes.
[ 13.138] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 13.138] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
[ 13.138] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 13.138] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 13.139] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 13.139] (II) No input driver specified, ignoring this device.
[ 13.139] (II) This device may have been added with another device file.
[ 13.139] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 13.139] (II) No input driver specified, ignoring this device.
[ 13.139] (II) This device may have been added with another device file.
[ 13.650] (II) intel(0): EDID vendor "SDC", prod id 18258
[ 13.650] (II) intel(0): Printing DDC gathered Modelines:
[ 13.650] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz eP)
[ 15.636] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 84.266] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 84.266] (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
Any idea how to turn off intel card and used only radeon?

I'm not entirely sure for your model/make, but it may be not possible to shut down the intel and use the radeon only. Since the intel is the one physically connected to the screen, so all graphics go through it in any case.
You should however be able to switch off the ati card to save battery power. Which is what I do, still using vgaswitcheroo, since it didn't work otherwise:
https://wiki.archlinux.org/index.php/hy … e_Graphics
Or you may try PRIME to use the DGP (ati card) on an application base (for 3-D apps):
https://wiki.archlinux.org/index.php/PRIME
I think I tried it once, but I don't remember if it worked and I don't need it. Since for real 3-D apps the radeon (ati) driver isn't that good, and OTOH for compositing (desktop effects) the intel is good enough... (Edit: +my laptop heats up too much using the ati.)
What's your purpose ?
Regarding why the ati isn't shown in your xrandr output:
Is xf86-video-ati installed ?
Is the radeon module loaded (output of 'lsmod |grep radeon') ?
Edit: punctuation, clarify
Last edited by rebootl (2014-12-31 12:10:50)

How to enable Intel VT-x in Windows 8 ?

In VMware, I am getting error message about enabling Intel VT-x setting in bios ? I have no idea how to go to BIOS in windows 8 and how to enable it ?
Could you please guide me how to enable VT-x in windows 8 ?

Hi,
As enabling Intel VT-x is related to hardware, please contact the computer or motherboard’s manufacture for help.
Thanks.
Nicholas Li
TechNet Community Support

How to enable some DFF segments on AR Trx form for specific context only

I have a requirement to enable 3 of many DFF segments on AR Transactions line DFF for particular context only. I am not able to figure out how to achieve it.
When we query for an Invoice and navigate to lines DFF I want these fields to be allowed to update. Currently they appear as read-only. These are interface line attributes used across many different contexts but I need them as update allowed only for few contexts.
I went through different forum topics and was trying to use security rules but these segments do not have the security enabled flag checked under DFF segments and when I try to check it it throws an error as to update not allowed.
Form personalization doesn't work on DFF, so that is out too.
Any help would be appreciated.
Thanks.
Shivang

Hi,
My requirement is a little different. We already have context and reference setup when we implemented Oracle 3 yrs back but what I need is to enable few segments / attributes inside a context that too when the invoice is queried for not when it is being created manually. The same attributes are being used by different contexts but I need to enable only for a few and not all contexts.
Appreciate if you are able to help on this.
Thanks.

Satellite U500 - How to enable Intel virtualization technology?

How to enable Intel Virtualization Technology on Satellite U500 or if this feature is already available or not because im VMware configure in my laptop and when I wont to run it I'm getting the message
*You have configured this virtual machine to use a 64-bit guest operating system. However, 64-bit operation is not possible. This host does not support VT.*
By the way my Laptop is Core2duo, Windows 7 Home Premium 64bit, RAM 3GB

Hi hersi,
Yes, thats the important model number.
According the Toshiba website your model has Intel Core2Duo T6600 CPU. So I have checked the Intel page directly and T6600 CPU doesnt support Intel Virtualization Technology (VT-x). You can check this yourself:
http://ark.intel.com
Unfortunately there is no option to enable Virtualization :(

How I disable my textbox at view time and Enable only when insert or edit t

hi master
Sir i have master detail form and i am not use toolbar i am usint my button add/edit/view/next/last and other
sir my requirement is all textbox disable at view time enable ony edit or inserting time
how I disable my textbox at view time and Enable only when insert or edit time.
i use this
if :system.form_status='change' then
if :system.form_status='insert' then
if :system.form_status='execute query' then
but not right work
please give my idea where i use what statment
send me sample
Aamir

Aamir,
Set the text item's Enabled property to False at design time. Then, using SET_ITEM_PROPERTY (see Forms Help), set to Enabled in the relevent part of the code on the WHEN-BUTTON-PRESSED triggers on your Insert and Update buttons. Similarly, disable on your Save button once the cnahges are saved etc.

How to enable Graphic Modeler

Hi
Pelase suggest me how to enable Graphic Modeler in Assignment Block "Contacts" in Opportunity transaction.
Thx.

Problem solved.

How to enable only intel graphics/d​iscrete graphics on T400(WxgA+​), windows xp,

Similar Messages

Maybe you are looking for

How to enable only intel graphics/discrete graphics on T400(WxgA+), windows xp,