How to enable pernr field in miro

Hello,
while creating invoice in miro, pernr(emp no.) field is in display mode but i want the field in changeble mode.
for the above requirement I have enabled pernr field in miro by going to transaction olmrlist   and then entering the below
Transaction          MIRO
Screen variant       7_6310
Program              SAPLMR1M
Screen               6310
and by checking the attributes of field Personnel no .
while doing so the quantity field which was intially enabled got disabled .
I want the quantity field to be enabled.
I am working in sap ecc600.
Kindly help me .
Regards,
Rachel
Edited by: Rachel on May 7, 2008 11:24 AM

I got the answer for my Q.
Purchase order is a service PO and in case of service PO, you can
enter the quantity during MIRO only if GR-based IV and SRV-based IV
indicators ( at invoice tab of PO) are ticked. Since PO present in system these indicators not ticked so quantity field is set as displayed.
Regards,
Rachel

Similar Messages

How to enable all fields in DTP Semantic Group....

Hi
In BI, for one of my Master Bearing Infoobjects DTP-> Semantic Group is enabled for all fields. But for 2nd master bearing infoobject, only its primary keys are enabled & non-primary keys r disabled in its semantic group. Even both structure have same DTP settings and both have data.
Could u pls. let me know why is it so & how can i enable all fields in semantic group.
Thanks...

Hi Harpal,
What are your target and source objects?
Take a look to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Choose This graphic is explained in the accompanying text Semantic Groups to specify
how you want to build the data packages that are read from the source (DataSource or
InfoProvider). To do this, define key fields. Data records that have the same key
are combined in a single data package.
This setting is only relevant for DataStore objects with data fields that are
overwritten. This setting also defines the key fields for the error stack.
By defining the key for the error stack, you ensure that the data can
be updated in the target in the correct order once the incorrect data
records have been corrected.
Regards, Federico

How to supress the Field in MIRO

Dear All,
There is requirement of our system auditor.In MIRO transaction they want " Invoicing party " in "details tab" to be supressesed .No body from accounts dept.while making invoice verification can enter another vendor in that field as this vendor comes frrom PO by default.
I checked in Customisation also but unable to found this field for making the same to be grey means supress.
Please help and guide me how to make this field supressed.
With Best Regards,
Rajesh

Hi,
when i referred to Screen variant: ZWHATEVER i meant that you have to create one (this means that you´ll be asked to create a transport request).
Once you have created it you justhave to assign this screen variant to the transaction MIRO In SHD0.
Check this:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/67/232037ebf1cc09e10000009b38f889/content.htm
Best regards.
Edited by: Pablo Casamayor on Jul 7, 2009 10:17 AM

How to Activate "Site" Field in MIRO - G\L Account Tab

Hi Experts,
I need to make "Site" Field in Tcode MIRO - G\L Account Tab as inputable field for User which is currently not visible in screen.
This field is available in Standard Layout provided in SAP as Invisible.
I cannot able to make the field as Optional in Standard Layout.
The field is also available in Structure ACGL_ITEM-WERKS.
Can Anyone tell me how to make the field ready for User Input in MIRO Screen.
Thanks and Regards,
Selvakumar. M

Hi Selvakumar,
                                                                                Please note that the following fields are not supported for G/L direct posting in MIRO:
ACGL_ITEM_VALUT (Value data )
ACGL_ITEM_VBUND (Trading partner)
ACGL_ITEM_GRICD (Activity code)
ACGL_ITEM_GRIRG (Region)
ACGL_ITEM_GITYP (Distrib.type for employ tax)
ACGL_ITEM_FKON (Fin. Budget item)
ACGL_ITEM_ETEN2 (Sched. Line is sales order)
ACGL_ITEM_WERKS (Plnt)                            <<<
ACGL_ITEM_EBELN (Purch.doc.)
ACGL_ITEM_EBELP (Purchase document item number)
ACGL_ITEM_PRCTR (Partner profit center)
ACGL_ITEM_BEWAR (Trans. type)
ACGL_ITEM_MATNR (Material)
ACGL_ITEM_BWTAR (Material valuation type)
These fields are not saved in the logistic invoice document so their value can not be transferred. They can be made visible by changing   screen variant however, this still means that the fields will not be ready for input, you can only see them. technically, when an invoice with the item referred to a G/L account is posted, the field 'Plant' cannot be properly saved in the database table RBCO, because there are no fields for them in the table RBCO
and this can cause problems by following processes. The field can be made visible by changing screen
variant however, this still means that they will not be ready for input.
Regards,
Mauro

How to enable certain fields in billing document?

Hi gurus!
I need your help with this, we recently upgraded our system from version 4.6C to ERP 2005. We have some users in Sales who are in charge of the billing process, in version 4.6C they were able to change some fields of the billing header such as:
- Currency
- Payment terms
- Incoterms
In the new version these fields appear as "disabled" (users cannot change anymore what was copied from the Clients Master Data).
I know there's some configuration in which info is copied from the sales order to the billing document (Copy Control). I already checked that and I'm not able to find where I can change something to "enable" these fields so users can define whatever they need.
I also tried to see in SE80 if the fields that are part of that Dynpro have some other properties to enable them but was unable to change something.
I also checked transactions OVA2 and VUA2 but didn't find somenthing that could help me out with this. Finally I checked different user exits in the previous version but it seems that when this was originally configured that was not the solution.
There's also something else going on with the header because in the previous version users had the chance to type different texts in the Text Header tab but now everything is "disabled".
Is there a transaction or something that you know so I can enable those fields?
Thanks in advance.

Not sure what the requirement is as ideally, you are not suppose to change the partner function manually during shipment. However, go to VOPA, place your mouse on Transport and click on Partner Procedures. Double click on Procedure and see whether Forwarding Agent is set to Not changeable . If so, untick that and save. Now retry the process.
thanks
G. Lakshmipathi

How to enable a field on the person form?

Hello,
I am working in UK Legislation and I need to enable a greyed out field on the person screen. It's the "Disabled" field (to capture the disability of an employee).
This might sound an easy thing to do but I couldn't find any function or profile option that controls this. I couldn't find any metalink note on this. Could any one tell me how to do this or let me know of any metalink note on this?
Many Thanks,
Baloo

Both answers were helpful. Thanks a lot.
In the interest of other users I am pasting the answer below:
The Disability Discrimination Act 1995 (DDA) is the main piece of legislation which makes it unlawful to discriminate against a disabled person in their terms of employment, promotion opportunities, by dismissing them or by subjecting them to any other detriment. This act had been further amended, cumulating in the Disability Discrimination Act 2005 which is related to disability generally and extends outside the area of employment although some provisions will relate to employees.
Parts of the Act came into force in December 2005, other parts relating for example to transportation are applicable from December 2006. The above provisions replaced the concept of Registered Disabled Persons and
employment quotas which had been in existence since after the second world war.
In releasing the enhanced Disabilities functionality, it was intended to facilitate the maintenance of disability records through the Disability form and not the Disabled field on the person form.

Dynamic Action - How to enable text field based on a condition

Hi,
I have two text items. Need to create dynamic action for the following,
1. Order_type - Drop down values having CONSUMER & WHOLESALE.
2. Order_number- Text field
Order number should be disabled and only on selection of order type ,order number should be enabled.
Can someone please help me on this?

Hi Gayathri,
Gayathri Venugopal wrote:
Hi,
I have two text items. Need to create dynamic action for the following,
1. Order_type - Drop down values having CONSUMER & WHOLESALE.
2. Order_number- Text field
Order number should be disabled and only on selection of order type ,order number should be enabled.
Can someone please help me on this?
Create two dynamic action
1. Make it order number item disable on page load.
   Event : Page Load
   Action : Disable
   Fire When event result is : True
   Selection Type : Item
   Item : Your order number item
2 . enable and disable order number on selection of order type(assuming when order type is null it is disable otherwise it is enable)
    Event : Change
    Selection type : item
    Item : your order type item
    condition : is not null
True Action
    Action : Enable
    Fire When event result is : True
    Fire on page load : True
    Selection Type : Item
    Item : Your order number item
False Action
    Action : Disable
    Fire When event result is : False
    Fire on page load : True
    Selection Type : Item
    Item : Your order number item
Hope this helps you,
Regards,
Jitendra

Enable item field

Our sap was disabled the net price by IMG. Now, the new requirement is to enable to net price allow to input when the user choose the account assignment category as 'K'. So, i would like to know which user exit trigger the event and how to enable the field of net price, thank your very much.
Moderator message: please work yourself first on your requirement.
Edited by: Thomas Zloch on May 9, 2011 2:15 PM

Yes ...Ram I am looking in for a new Item field with Mandatory using OA Framework.... Could you please suggest how get the information regarding ...
Thank You for your support...
Regards
Kumar

How to enable cost center field in MIRO-SIMULATE screen

Dear experts,
In MIRO transaction code when we enter inputs and if we click on 'SIMULATE' button in application toolbar, one window will appear.
In that i need to enable COST CENTER field.
I tried in screen variant, in that the options w.content, output only, Invisible and required only was there.
Is there any other option to enable that field.
Help me.
Its high priority issue for me. Please help me if it is possible or not?
Edited by: Prabu S on Mar 3, 2010 11:37 AM
Edited by: Prabu S on Mar 4, 2010 6:40 AM

Hai i tried exits. But we dont have option for enabling screen field.
Please help me any enhancement is possible for this.
Thanks,

How add a new field in transaction MIRO

Hello !
I need to add a field (tiban-iban) in a subscreen of transaction MIRO, and I don't know how
Screen concerned
SAPLMR1M / n° 6510
I need to add the field (display only), and fill it from table tiban.
Thanks
Aussie

hi
u can check the transaction varients in SHD0
Adding new field (ie Goods Recievd date ) at item level in MIRO tcode.
How to add a field to the Vendor Info on MIRO?
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=addfieldin+miro&adv=false&sortby=cm_rnd_rankvalue
regards
kunal

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

How to Enable Cost Center Field in Infotype 0001

Dear all my Friends,
Can anybody please tell me that how to Enable Cost Center Field in Infotype 0001, actually the problem is while hiring the employee the field itself disable and not allowing me to put any CC on that field but which should be enable while hiring or if we intend to change in future through PA30 and after that i thought i can do in Infotype 0027 also but in infotype 27 the field called Master Cost Center field is still disabled which will reflect in 0001 or Vice Versa.
So friends pls tell me where my configuration is wrong or how will i get enable that field in 0001 infotype so that i calculated the cost of that employee.
Waiting for ur Reply friends,
Thanks,
Prashant.

Dear Rajesh,
Thanx for ur Solution and i got the answer, actually i m maintaining through OM and u gave me the exact solution .
Gr8 job dear. Thanx allot once again
Thanks,
Prashant.

How to Make Assignment field in Details Tab Mandatory in MIRO

Hi Experts,
I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
Thanks In advance.

Hi,
check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
But make sure that then all your endors haven an sort key in the master data.
Regards,

How to Enable Default Account field

Hi,
Anybody knows how to enable default account field in UCM.

Not sure what you mean by default..
But to enable accounts.
Administration>>Admin Server>>select the content server button>>General Configuration
Enter into Additional Configuration Variables:
UseAccounts=true
Or to only show accounts on the UCM via a dropdown list when you checkin content.
Administration>>Admin Server>>select the content server button>>Content Security
Select: Show only known accounts Checkbox.
Hit save.
Restart Content Server.

How to enable a partner application for Single Sign-On?

Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthil

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

How to enable pernr field in miro

Similar Messages

Maybe you are looking for