How to enable PIN authentication to make outgoing call , without login?

Hi experties,
In my organization, there are 2 type of user defined by management, which is user uses Extention Mobility(Login/Logout) at any IP Phone and the other side is users uses share ip phone as common number. each user have their own login profile, but how can i enable the sharing user do not have to login but they can uses their PIN to make outgoing call without login to ip phone. This features we normally found in analog phone where each user have personal PIN for outgoing call. for your infomation we're using CCM4.1(3)sr3c and IPPhone 7940 and 7960..Thanks in advance..

It sounds like you want to use Forced Authorization Code. On the route pattern out check 'Require Forced Authorization Code' and set a level. Callers using the route pattern will now be prompted to enter their code with 3 beeps. Go under Feature-Forced Authorization Code and create some codes. If the codes are the same or higher level as what is assigned to the route pattern the call will go out.
Don

Similar Messages

  • How to enable pin authentication features for hp laserjet 9050dn printers for all users?

    There Is A requirement to Enable Pin Authentication for all the users . We have hp laserjet 9050dn  Pinters
    We would Like to Save Papper hence wanted to enable this feature to all our printers.
    We would like to enable Pin authentication for all the users so that when a user fire a print out it would be in queue and when the user enters the PIN manually on the printer it would print and if the user doesnt require the pintout that he fired he dosent have to entr the PIN. Thus  End of the day all such  unrequired prints that were fired out will be in queu and they will be deleted end of th day.
    Thus we could save lots of Paper ..
    Can Some one Help Me to get this done...... Please post you Comments It Would be really Helpful....

    The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
    You may find the Commercial Laserjet board here.
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    You can also find the article related to this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
    (User manual, troubleshooting tips, drivers, and more info)
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • How can i hide my extension number when i make outgoing calls

    Hi All,
    How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
    Regards,
    Lester

    We use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.

  • I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

    Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

  • Not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem

    Good day Sidharth Namrta,
    It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
    iPhone: Troubleshooting issues making or receiving calls
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update. 
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap  Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My Samsung galaxy 5 will not make outgoing calls

    When ever i try to call somebody on my Samsung galaxy s5 the call will come up with a dialogue that says "Please re-enter the 10 digit telephone number you are calling, do not press send, *67, or *82 cannot be used on this call to block or unblock caller id". This is very annoying when i try to call people, like calling in sick to work or some stupid things like that. It will still ring and the call will just be fine if somebody else calls me but i just cannot make outgoing calls. I have tried to restore my phone multiple times and still no fix. If anybody knows how to fix this please let me know SOON!

    hi Verizon Wireless Customer Support I have a simple question for you. How is it a customer's problem if VZWSupport cannot see the comments in that customer's account? Now, coming to the point of performing a factory reset. Yes, I performed the factory reset and yes, it has been determined to be a hardware problem. However, my point is that how does a customer suddenly go from paying full price for a brand new (and expensive) phone to a second-hand, 'like new' phone, which has a market value of half of the original brand new version? It just means that I ended up paying top dollar for a brand new phone and instead now have to live with a second-hand phone, which is completely unfair. And, it is unfair because Verizon is not reducing my monthly Edge payments, which are currently aimed to cover the full price of the brand new phone Galaxy s5. So, if you want to be fair, give me the second-hand 'like new' phone, but then also reduce my monthly Edge payment to reflect the market price of a second-hand phone. Do you understand this, Jonathan? Including other users affected here with the identical problem peterporpoise abel8189 dollyspot

  • VCS-E unable to make outgoing call with search rule not found error

    Hi 
    I deploy telepresence device registered to CUCM and connect with VCS-C and VCS-E. The issue now is I am not able to make outgoing call and my search rule show not found, request time out.
    I use DNS zone to make the outgoing call and my VCS-E is able to resolve DNS SRV record. However search rule result show not found.
    Any advise are appreciated.

    Hi
    I managed to make a call to address that I am trying to reach. But it supposed to come up with PIN number to enter instead I saw the message that no incoming video.
    Can you please advise what could be the issue.
     tvcs: Event="Call Connected" Service="SIP" Src-ip="10.84.83.101" Src-port="27224" Src-alias-type="SIP" Src-alias="sip:[email protected]" Dst-alias-type="SIP" Dst-alias="sip:[email protected]" Call-serial-number="24a63c27-42b4-4950-ba02-6a548b279a09" Tag="f060faef-441f-47a2-9c75-e1b0623b5e14" Protocol="TCP" Call-routed="YES" Level="1" UTCTime="2015-02-25 14:38:32,604"

  • My phone is unable to make outgoing calls, receiving them and sending and receiving both SMS and IM are all ok? Anyone have solutions?

    I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?

    You need to contact Vodafone.

  • My iphone 5 won't make outgoing calls

    my iphone 5 won't make outgoing calls....i tried to restart network settings and then my whole phone all together....also i tried on wifi and off wifi and it wont ring......What should I do????

    Settings > General > Reset > Reset Network Settings.
    Shaker Ahmed wrote:
    whats can i do any one from apple suprted replay mee fast
    These are user to user support forums, as clearly stated in the Terms of Use that we all agreed to when signing up here.  Apple does not read or respond here.

  • IOS 8.02 not letting me make outgoing calls

    I don't know what's going on. At first I thought it was a fail-safe when bad I was in bad service. But even on LTE my phone REFUSES to let me make outgoing calls. I can't even type in the number and call. Any way I try, it fails. Won't even pull up the dialing. Just registers as an empty press.
    HELP! I can't even call Apple support.

    try a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    then check again.

  • Constant Buzzing and Can't make outgoing calls

    For the past month or so, our phone line has had a constant buzzing. Now, we cannot even get a dialtone to make outgoing calls. We do receive calls, but it doesn't do us much good since the buzzing prevents us from talking to anyone anyway.

    I am having the same exact complaint, "Constant Buzzing on line, and inbound or outbound conversation cannot be performed".  I am in southern New Jersey just outside of Philly, and this problem was first recognized approximately September 19th.  I went out of town and felt that the problem would be remedied by my return.  On September 24th the same problem was still present on the line.  I used to be a Computer Network Engineer years ago and have a telephone handheld "butt set" (handheld phone that the phone techs use to connect directly to the wires.  I disconnected all of my premise equipment and connected to only the line coming in from the pole, and the problem still persists which rules out any "interior" equipment malfunction.
    Original service appointment was scheduled for Thursday September 29 between 8AM and Noon, however when Thursday arrived, I noticed on the internet that my expected service visit time had been moved back (without any heads-up) to Friday September 30 between 8AM and Noon.  Friday 12 Noon comes and goes with no results yet, and upon looking at the internet again I noticed that the expected service visit time had been moved back once again to Friday September 30 at 8 PM.
    Very poor repair service for a "phone not usable" condition.

  • Can't make outgoing calls but receives fine (I believe it's the ISP)

    Hi.A small company were maintaining that uses a uc500 on a dedicated voip line suddenly can't make outgoing calls.This has occured on another two occasions when they were using a different ISP and It was due to them not paying their bill on time.This time we've called the ISP and they Insist everything Is fine on their end and that the company hasn't been disconnected.I can't find anything wrong with the UC.I can ping the ISP gateway.I can ping their SIP server and everything looks fine.I've added two debug files and would appreciate any assistance as my debugging knowledge Is not that great !

    Turns out the ISP was receiving calls In G729 and they use G711 Alaw.We didn't change any configuration on our side so I'm not sure what happened.I've set the sip trunk to use g711 alaw via CCA but calls are still going through as g729.I'm not sure what to configure via the cli.I assume It has something to do with transcoding but my telephony cli knowledge Is limited.
           Should I change the configuration for Individual dial-peers or Is there some global config. I can enter ?
      I added g711alaw to a dial peer and now I can't make any inbound calls either.I removed the g711alaw from the dial peer but It hasn't changed anything.
    Running debug ccsip message I receive "error 304 media type(s) unavailable. q.850 cause=65"
    I didn't expect such a small change to cause so much havoc.

  • Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. bt i dont have any problem in recieving calls.

    Thank you for providing immediate  feedback.   bt that solution did not help me to solve the problem.still am nt able to make outgoing calls. i dont find any problem in recieving calls also right. then i dont what is wrong with my iphone.The same sim which i used in iphone4s is working in all other phones.its not the problm of carrier.
    Iphone 4s Black 16gb

    Rather than starting a new thread every time it would be easier to follow you if you stick to the one thread

  • Not able to make outgoing calls

    hi folks,
    i'm stuck at one particular step in IPTX installation n i desperately need some wise solution to get me out of this.
    I'm able to recieve the calls but not able to make outgoing calls hrough my E1 line i am also attacing the softcopy of my router caonfig
    thanks in advance

    Hi,
    First of all I cannot see the D-Channel of your E1 created (Interface Serial 0/1/0:15).
    NB: Make sure you have enough DSPs for the E1 channels to be created automatically when you setup the controller E1 0/1/0
    I presume the following is the Dial-peer that you were hoping to use for outgoing calls:
    dial-peer voice 1 pots
    answer-address 701
    destination-pattern .T
    forward-digits all
    1. This can ONLY work if the calling number is from extension 701 (answer-address 701)
    2. You need to assign the D-Channel on your dial-peer because as it is there is no way it will know where to go:
    dial-peer voice 1 pots
    destination-pattern .T
    forward-digits all
    port 0/1/0 <--- Your E1 interface
    Also, the following is the minimum config for the virtual E1 interface:
    Interface Serial 0/1/0:15
    isdn incoming-voice voice
    I hope this helps.

  • TS3406 iPhone 4s will not make outgoing calls once updated to iOS 8.

    I updated my phone to iOS 8 a yesterday and when I did it deleted my phone including all my apps on  my phone even though it claims to have backed it up just before updating (not a big deal most were free apps and the work properly once downloaded and the paid ones stayed on) but, my phone will no longer make outgoing calls. When I try the phone makes no noise for about 5-10 seconds and says call ended. I've tried reseting the phone, reseting the network and turning airplane mode on and off and nothing has worked. Also when I plug my phone into my computer it tells me my phone can't be restored and I should try updating iTunes but my iTunes is up to date. Any suggestions?

    I Am facing the same issue as of yours. i m having iPhone 4s and upon updating to iOS 8 it has stopped making any outgoing calls .Though there is no problem in recieving calls also with sending/ recieving messeges.

Maybe you are looking for

  • Error in threading

    On clicking browse I am getting [bold]Warning:[bold] To avoid potential deadlock, operations that may block, such as networking, should be performed in a different thread than the commandAction() handler. Can anybody help? for the following code * Ma

  • Unit of measure PCS not defined for language FR

    Dear Gurus, I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message: "Unit of measure PCS not defined for language FR" I then went to MM02 to check the material master data "Sales Text" Tab. T

  • How to call the url page inside the procedure.

    Hi, I am not exposure in plsql. I am getting some problem in utl_http link. I create a one procedure. The procedure was successfully compiled. But the url page doesnt open.. I attached the procedure, create or replace procedure p(mob number) IS l_pag

  • National Stock Number (NSN) as an Alternate Item Number in PeopleSoft FSCM

    My company is a supplier of defense related products to the United States military and sometimes foreign militaries. The Defense Logistics Agency of the Department of Defense assigns items IDs to material which the United States military buys, transp

  • All browser run can access javascript objects in iframe but in firfox you can not do that after first refresh

    1- I have a DIV tag in html page 2- Load dynamically an IFrame into that DIV 3- suppose that I have a JS function in that IFrame with name "func". 4- after first loading IFrame in DIV I can access "func" 5- but after reloading another IFrame into DIV