How to enable Previous Step Button in First Substep of FPM Road Map

Hello All,
I have created three MainSteps M1 M2 M3.
In Main Step M2 having Substeps Say S1 S2 S3 S4.
In M2 of S1 Previous Button by default it is disabled. Means user can't go back from First Substep(S1) to Main Step2 (M2).
Please let me know how to enable "Previous Step" Button in First Substep (S1) of FPM Road Map in M2.
Thanks in Advance.
Br
-CW

Hello BS,
Thanks for your suggestions.
Yes we can do with custom button.
Is there anyway to enable standard Previous Step Button in First Substep instead of creating cutom button.
Please guide me if any other options.
BR
-CW

Similar Messages

How to Enable the SAVE button in the Menu Bar of the Invoice Document.

Hi.
How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
I would like to save the Invoice document in PDF format.
Regards
Irfan

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

How to capture previously clicked button(previous event)?

Hi guyz,
I have frame in which i have different panels. I would like to capture the last clicked button. My objective is to bring a pop-up box(dialog) when anything other than a specific button is clicked in one of the panels. So, i would like to know if i can see what button was clicked previously. Does anyone know?

How to capture previously clicked button(previous event)?Store it somewhere and then you can use it later:
ActionListener previousActionEvent;
JButton b = new JButton();
b.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent evt){
previousActionEvent = evt;
});

How to enable or disable buttons on an interactive ALV report

I have two buttons on Interactive ALV report. Before displaying the ALV report, I want to enable or disable buttons on ALV depending on some conditions.I dont want to make the buttons visible or invisible. This is not an OO ALV report.
Please suggest !!!

Then you have to use the event set_pf_status or parameter I_CALLBACK_PF_STATUS_SET for this pass the form name.
You have to Implement the form Routine.
FORM PF_STATUS using status type SLIS_T_EXTAB.
SET PF-STATUS 'STS' excluding status.
ENDFORM.
First create the pf-staus using SE41 or double click on the status name and create . By default you make them Disable mode.

How to enable the variant button in my report

Hi experts,
How can I enable the variant button at the top menu bar of my report?

Hi Miv,
In the above post of mine I didn't give info. on creating variant.
Here is how to create a variant:
On the Selection screen after giving INPUT. Just press ctrl+S.
to create a variant.Give the variant name and save it.

Reward all helpful answers
One request, i.e., don't forget to close the thread by giving points if your problem.
Regards,
V.raghavender.

How to enable the Save button in ALV_GRID_DISPLAY function module

Dear experts,
                I Created a ALV report by using ALV_GRID_DISPLAY functional module ,i need to enable the SAVE button ,my reqirement is to trigger some event in save button, then if i created own PF status existing icon are hidden, mention in below screen shot.
suggest me
Thanks
sivashankar k

Hi sivashankar,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
*   I_INTERFACE_CHECK              = ' '
*   I_BYPASSING_BUFFER             =
*   I_BUFFER_ACTIVE                = ' '
       i_callback_program             = sy-repid
       i_callback_pf_status_set       = 'SET_PF_STATUS'
        i_callback_user_command        = 'USER_COMMAND'
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
   SET PF-STATUS 'MENU'.
ENDFORM.
""Handle use action
FORM user_command USING r_ucomm     LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
   CASE r_ucomm.
    WHEN 'SAVE'.
   ENDCASE.
ENDFORM.
PF STATUS : MENU (copied STANDARD(gui status) from SAPLKKBL, do changes as per requirement)
Regards
Sreekanth

How to enable the add button in worksheet properties in OLAP

Hi
After Changing the time to Pacific, im able to manage the catalog..But still im not able to share any of my olap worksheets.
I have also granted the BISM and D40 objects from ' user_objects table ' to the user from whom im trying to share the report..
but in my OLAP report..the worksheet properties shows me the add priveleges button in a disabled form..pls can any body help me out..it is an urgent issue and cud'nt enable the add button..
please give some guidance...
Thank you,
S. Kokila

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

FPM road map step name translation

Hi everyone,
I have an FPM application with some steps, and I'd like to translate the name of the step.
I opened the FPM Application in the Portal's Self-Service Administration, I can see the Road Map Definition, but I don't know how can 'I translate the Description field.
Please help.
The solution is here:
/people/soledad.alvaradoganzhorn/blog/2004/09/13/8-short-steps-2-tools-translated-traducido-traduit-uumlbersetzt
Thanks
N.
Edited by: ngastanek on Mar 21, 2011 4:28 PM

THe solution is here:
/people/soledad.alvaradoganzhorn/blog/2004/09/13/8-short-steps-2-tools-translated-traducido-traduit-uumlbersetzt

How to Enable a Push Button In The Form That Is Always Greyed Out?

Greetings All,
I am trying to enable an existing "Return" Push Button(PB) which is always greyed out whenever the form is called in either an update or review mode. After some research, I found that this PB's functional property is "Enabled" (i.e. the enabled value = 'Yes'), and it is coded programatically set 'Off' in 30 places and 'On' in 2 places in the form that I inherit from my predecessor by using the following code:
SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN', <XXXXX>);
Where <XXXXX> could be either TRUE or FALSE. I've been spending a lot of time in trying to enable this "Return" PB (without modifying the existing programming code) by adding the 'SET_ITEM_ON_OR_OFF' built-in command to set the PB on in WHEN-BUTTON-PRESSED TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE Trigger, but all tries in vain. Could you please help me with the following question?
What is the easiest way to enable a PB that is set programmatically?
Is there something else I should know to enable a PB, in addition to what I have already mentioned above?
Thanks in advance,
Jinlan
--

Thanks all for your information and help. I included the following code, as suggested by Manu, in WHEN-MOUSE-DOWN TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE TRIGGER:
SET_ITEM_PROPERTY ('BLK_UPDATE.PB_RETURN_WORK_REQ', ENABLED, PROPERTY_TRUE);
and I made sure there was no " SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN_WORK_REQ', FALSE);" statements after the above code, but, the "Return" PB is still in grey; in other words, it is still not accessible when my form is called.
Perhaps, I need to place the above SET_ITEM_PROPERTY code in a different trigger other than the triggers mentioned above, uh? Any thoughts on this?
Manu,
You are absolutely right that the "SET_ITEM_ON_OR_OFF" is an ih-house written procedure which is defined/stored in the Attached Libraries. (I should have checked before making the "built-in" assumption. Thanks for catching and clarifying this.) Please help me with the following questions:
How do I view the procedure in the Attached Libraries???
Thanks in advance,
Jinlan
--

How to enable the "Cancel button" so you can stop a report while loading ...

I have seen that some reports have a Cancel button located just below "the loading ..".
How can I enable that button in MS Reporting service 2005?

The following mechanism responds to any of the following events: <Esc> key, Close icon ('x'), Cancel button
JavaScript part:
function popupClosedListener(event){
 var source = event.getSource();
 var popupId = source.getClientId();
 var params = {};
 params['popupId'] = popupId;
 var type = "serverPopupClosed";
 var immediate = true;
 AdfCustomEvent.queue(source, type, params, immediate);
}JSF part:
 <af:popup ....>
 <af:clientListener method="popupClosedListener"
 type="popupClosed"/>
 <af:serverListener type="serverPopupClosed"
 method="#{myBean.serverPopupClosedMetod}"/>
 </af:popup>Finally, Java part:
public void serverPopupClosedMetod(ClientEvent event){
}

How to enable/disable a button in Photoshop panel?

Anyone know how you'd create the proper code in a Photoshop extension panel so that certain buttons in the panel could be enabled or disabled dynamically as needed?

Hi Sonunew2flex,
Write one public function in main application file as below...
// In main application file
public function changeButtonDisableStatus(bool:Boolean):void
     yourNuutonId.enabled = bool;
//In your hear renderer do this
if(cb.selected=true)
   Application.application.changeButtonDisableStatus(true);
else
   Application.application.changeButtonDisableStatus(false);
Thanks,
Bhasker

How to get previous step totals from Apple Health

Is there a way (natively or via 3rd party app) to isolate step totals from previous days in Apple Health? All I can find is the weekly view, which won't let you zoom in. The daily view will not let you view anything but the current day.
I've tried a couple of apps (Runkeeper and Jawbone UP) that will read going forward, but nothing will read the historical data.

Is there a way (natively or via 3rd party app) to isolate step totals from previous days in Apple Health? All I can find is the weekly view, which won't let you zoom in. The daily view will not let you view anything but the current day.
I've tried a couple of apps (Runkeeper and Jawbone UP) that will read going forward, but nothing will read the historical data.

How to enable the 'FIND' Button in Module Pool Screen. Logic please

Hi All,
   I am writing one Module Pool Program. I have one requirement like I have to put FIND, FIND+ buttons on different screens.
   I am able to do the code for normal FIND. According to my requirement I have to display one Popup when the user click on FIND button. Once he entered some value it should find all the records and all the fields and display the list of hits in another popup. This whole process should as same as in SE11 Transaction functionality.
   Example: SE11 ->Table Entries -> and click the FIND Button. I need the same functionality in my Program.
   Please let me know ASAP. If you provide some code sample it will be Great.
Thanks & Regards
Kiran

Hi
If you have just implemented the code for FIND I believe u need to add some little modifications for FIND+.
U need only to manage the position of the last found value, so u need to go on from that position for FIND+.
The position should have the two coordinates X (the position in the record) and Y (the number of the record):
- FOUND should start for postion = 0, 0
- FOUND+ should start for position = X, Y
Max

'Reuse_alv_grid_display' - how to enable save layout button

Hi,
am not getting the option 'save layout' button in my ALV. I have tried the following code.
s_layout-colwidth_optimize = c_on.
s_layout-zebra = c_on.
s_variant-report = sy-repid.
s_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = s_layout
it_fieldcat = t_fieldcat
is_variant = s_variant
is_save = 'A'
TABLES
t_outtab = rt_final
EXCEPTIONS
program_error = 1
OTHERS = 2.
Please help.

Dear Arvind,
If you are using "REUSE_ALV_GRID_DISPLAY" and not passing "I_CALLBACK_PROGRAM = SY-REPID", You will not be able to save layout.
So I request all to pass following parameters to save layout.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT
 I_SAVE = 'X'
 IS_VARIANT = 'X'
 TABLES
 T_OUTTAB = IT_DATA
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
With Regards,
Tushar Trivedi.

How to enable Previous Step Button in First Substep of FPM Road Map

Similar Messages

Maybe you are looking for