How to enable printer for wireless?

From my (1st gen.) iPad I can instruct wireless printing to my HPLaserjet CPI1525nw.
How can I add my HP Laserjet 6MP so that it too will perform wireless printing?

I went to System Pref for Print & Scan, selected the 6MP printer and checked "Share this computer on the network." (Printer sharing is on.)
Then to HP printer Network Diagnostics, followed several steps, including re-starting my cable modem (& AirportExtreme)
When finished, I get "Cannot find server. This computer appears to have a working internet connection but cannot find "Hewlett-Packard Laserjet 6MP._pdl-datastream._tcp.local. You may have typed the address incorrectly."
The part ",_pdl.....etc." is totally unfamiliar to me (I didn't type anything)
Location on 6MP is "My Base Station - Computer Room"
At total loss to how get around this and "find Server"

Similar Messages

I have a hp deskjet 3050 all-in-one printer how can i setup for wireless printing my os is windows7.

how do i setup my hp deskjet 3050 all-in-one printer for wireless printing my operating system is windows7

Unplug the USB cable. Now go to Start > All Programs > Hewlett-Packard > Deskjet 3050 > Add a Device. Run the program and choose Wireless as the installation type.
Follow the directions. It will ask you to connect a USB cable temporarily. Do not connect until it asks and remove it when it tells you.
Finally, when you are done, go to Control Panel > Devices & Printers and delete the USB instance of the printer so you don't get confused when printing.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?

How do I set up my HP psc2175xi all in one printer for wireless printing or network printing?
I am changing the set up of my home computer to add another computer.
I would like to go wireless from my computers to the hub and wired from the hub to my
printer. I do not think this printer can do that since it does not have the ports to connect to a router hub, I think.
I am rather new to this way of setting up, so any help would be nice.

You could get a wireless router that supports USB printers, but these only support printing, not scanning. You could just go buy a new wireless printer since your printer is pretty old, anyway.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Configure dj 2540 printer for wireless print thru samsung grand (without router)

how to configure dj 2540 printer for wireless print thru samsung glaxy grand mobile (without router)

Hi patede,
Welcome to the HP Support forums. I see that you would like to learn how to set up your Deskjet 2540 printer to be able to print wirelessly from your Android mobile device when you don’t have a router.
I have included the document titled Printing from an Apple or Android Mobile Device with HP Wireless Direct. The document will walk you through setting up the printer and how to print from your Android mobile device. Please note that when you are connected to the printer’s network you will not have access to the internet.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How to enable GUI for a Cisco 1841?

How to enable GUI for a Cisco 1841?

Hi,
install SDM or CCP on your PC then on the router :
en
conf t
ip dhcp excluded-address 192.168.1.254
ip dhcp pool MYPOOL
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
ip http server
ip http authentication local
username xxx privilege 15 secret xxxx
int f0/0
ip address 192.168.1.254 255.255.255.0
no shutdown
Regards.
Alain.

How to enable Print Preview with the Envy 5530

How to enable Print Preview on the Envy 5530

Hi,
A print preview is not offered by the current HP software as older software versions provided.
A preview is only available if the application you are printing from include a such, it is not provided by the printer driver itself.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What is the best printer for wireless printing with the iPhone?

What is the best printer for wireless printing witth the iPhone?

Roaminggnome has the list......pick on of those TERRIBLE printers and go for it....
I hope Apple see fit to broaden this list, because, having thrown away several of those brands in my life, I now have a network compatble BROTHER printer that's awesome,
"There's an app for that," ie the BROTHER, but you can only print pictures and soforth.
Apple, step up, open up the list of printers we can use!

How to enable SSL for policy service?

Hi all,
My application is using SunONE's C API to communicate with the Identity Server.
In order to enable SSL, I have changed the following lines in amconfig.properties:
com.sun.am.namingURL = https://id01.core.development.net:443/amserver/namingservice
com.sun.am.policy.am.loginURL = https://id01.core.development.net:443/amserver/UI/Login
com.sun.am.policy.am.library.loginURL = https://id01.core.development.net:443/amserver/UI/Login
After operating these changes, everything continued to work fine...but then, I checked with a network sniffer what data is being sent to IS:
- The login and naming data were over SSL
- Policy and session items were plain HTTP
My questions are:
1. How to enable SSL for policy evaluation requests?
2. How to enable SSL for sessionservice requests?
3. What are the changes required on the server/client?
Many thanks,
Dan

There might a better different forum for this question.

How to enable logging for the Web Proxy

Hi,
Does anyone know how to enable logging for the Web Proxy feature under "Web" in Server Admin?

Aren't the web proxy hits logged in the standard apache logs? /var/log/httpd/access_log

How to use AE for wireless printing with Ethernet Printer?

Hi all,
I have been using my AE connected to a printer via USB for printing but have now replaced my printer with another model that only has Ethernet connections.
Can someone please explain how to set up the AE so that I can print? I can get so far but seem to be doing something wrong somewhere. Here's my setup:
Mix of Macs and PC's using Airport Time Capsule for wireless network. Currently setup as 'Create a Wireless Network'
1 x b/g Airport Express - now with Ethernet connection between AE and Printer. Currently connected as 'Join a Wireless Network'
Via 'Add Printer' I have selected 'Internet Printing Protocol - IPP' as the Protocol and added the IP address of the Airport Express '10.0.1.10' as the Address. This seems to connect OK but all I get is printer paused.
Any idea where I am going wrong please?
Many thanks, Mike

Sorry you are having difficulties.
Suggest that you first get the printer working with your AirPort Extreme in case the configuration on the Express may not be quite right.
I'm not familiar with the Epson products, but I do use an HP ethernet all-in-one device.
The basic "must do's" on the device include entering the printers MAC address and assigning a fixed IP address that the printer will always will receive using a DHCP Reservation on the AirPort Extreme. My all-in-one gets 10.0.1.25 It sounds like you may have done this.
After installing the printer software from the disc, you go into the Mac's System Preferencesj > Print and Fax and click the small + (plus) button at the bottom of the printer list. The HP printer appeared immediately as an available printer, so click it to highlight it and then click Add at the lower right. It's been flawless since it was installed about 3 months ago.
You'll need to Add the device for each Mac computer on the network. I don't use PC's but imagine that Add Printer or Add New Device would be the way to go here.
Sometimes it helps to call the manufacturer and endure the hold for 15-20 minutes waiting for the manufacturer's tech support people.

How to connect printer to wireless connection

Hpdeskjet3050a all in one printer J611g How do you connect the printer to a wifi signal?

Hi,
Please read the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02722113&cc=us&dlc=en&lc=en&product=5061082&tmp...
If you already installed the software, you may find the wireless configuration as follows:
Click Start, select All Programs, select HP,
Select Your printer name,
Select Printer Setup and Software Selection,
Select eighter Convert a USB connected printer to wireless or Connect a new printer and Follow the onscreen instructions.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hooking up my Macbook Pro to my Epson printer for wireless

I recently purchased a mabook pro and would like to make it wireless printing with my espon printer...the epson has already been installed by putting the usb cord in but i wish to make it wireless so I don't have to use the cord all the time, how can I go about this...

Read Epsons user manual for wireless setup or contact Epson for step by step instructions.

How to enable logging for mail.app in Mountain Lion

I am at my wits end trying to figure this out....
Does anyone have a clue how to enable the logging for mail.app under Mountain Lion?
In the past, you could open up Console and click on Console.log and see the logging of mail. Under mountain Lion, there is no more console.log. I cannot figure out how to enable it.
I have tried to run the AppleScript of "Turn On Logging" but the script errors out under Mountain Lion.
Does anyone know how to do this or a better way, maybe a tool or something that can help you troubleshoot mail.app issues?
Thanks in advanced

Hello,
I have a similar problem. The script "Turn on Logging.scpt" runs without error, but I do not see any socket logging. I only get two messages, which I also get when I start mail without the script by just clicking the mail.app icon in the dock. The Messages are:
1/10/13 3:43:32.618 PM Mail[11276]: Using V2 Layout
1/10/13 3:43:36.388 PM Mail[11276]: *** -[IADomainCache init]: IA domains cache is out of date.
Any help would be appreciated

How to enable history for settypes?

Hi,
We are using few custom settypes in our project and want to track any changes made to their attributes.
I can see two tables created for each settype, one of which ends with 'H', which is a history table.
But this table is always blank, even if i make any changes to the settype attributes. How can I enable history for settypes? Any idea?
Regards,
Vikrant.

there is one xml or .dat file which your Basis team would be having, which need to be placed in the directory where your GUI is installed... without which nothing can be done after these many trials on options provided.
some ppl know it as sticky memory too... search for OSS or in sap support..
Re: History gets disbaled with SAP GUI 7.10 Patch 11
Edited by: Jay Sadaram on Dec 4, 2009 1:59 AM

How to enable DFF for a particular country on a Standard OA Framework page

Hi All,
I have a requirement for iExpense. Here I need to enable a DFF and that should be display only for a particular country say 'India'. I have done this for the core apps forms but for OA Framework pages I am not sure.
In core apps we have used context senstive rather than Global.
Could you please help me on this that how can I enable DFF for a particular country.
Thanks,
Sam

hi
i think u r talking about Domestic and Recoverability DFF,u need to find out the id of those LOV fields ,u can find them going in view source ,right click go to view source and search the fields against the prompt appearing against these LOV like (Recoverability) u will get the id of this field ,then extend your CO and hide this field in processRequest method of extendedCO according to your org id .
thanx
Pratap

How to enable printer for wireless?

Similar Messages

Maybe you are looking for