How to Enable Quick post in BIOS setup?

Hi anyone,
does anyone know how to Enable Quick post in BIOS setup? This option does not seem to be there in setup or maybe Im not going about it the right way. Any help would be appreciated.
Cheers
muks

Quick post option does not exist and there is nothing to do. All you can try is to use some hardware diagnostic tool.

Similar Messages

Sooo... How do I get into the bios setup?

Now before you get out the pitchforks and torches, I know I'm supposed to continually press or hold a certain Function key when I first power on a computer.
My cousin left me his old Pavilion a410e. I figured I'd set it up for when family or friends needed to use a computer. Well... when I got everything together and started it up, I got an error. "CPU Fan Failure". (Now you see why my cousin gave the computer to me.) I popped open the case and saw the fan spin up fine when powering the computer. The fan's power connecter and the heatsink/fan are all properly in place. I tried to google for a solution, and came across suggestions to turn off the fan check through bios. The computer came into my hands with the 3.06 bios, and while in that bios menu, the cpu fan options were greyed out (unchangeable). I thought maybe a bios update would change that, so I went ahead and downloaded/installed the 3.10 bios update from HP. It installed fine (I guess), but now I can't get into the bios menu, no matter which key I press. Windows boots up fine, so long as I bypass the CPU fan failure warning by pressing F2. I'd really like to kill that warning. How do I get into the bios menu now, guys?

ComputerzEast wrote:
You may be able to go back to an older bios revision. . . some computers let you and others do not. I don't have experience with this particular model to know for sure.
I wouldn't mind trying. I'm not sure where I'd find older bios updates, tho. HP doesn't seem to archive their bioses on the site.
20YearsHPUser wrote:
In windows, what bios version does it report? -- you said you were able to boot into windows.
I'm...not sure what you mean, but if you're asking me which bios version I have installed currently, it's: 3.10. For Pavilion a410e.
nazcar4u wrote:
Ihis may sound stuipid but have u tried hitting the ESC key to enter BIOS?
ESC takes me to the "Boot Menu", which works, oddly... The boot screen says to press F1 to get into the bios setup, but it just won't work.

B490 : How to enable virtualization technology in BIOS?

Hi,
I have Lenovo B490 machine and i need to enable virtulaization technology for using virtual box. However i do not see this option under security tab in BIOS.
My BIOS version is : H5ET40WW(1.13)
Please let me know how to get this working.
Thanks,
Kesavan

hi kesavan,
Welcome to Lenovo Community Forums!
Try Checking the Options under, Configuration TAB
Try looking for Virtual technology option,
You can refer to this thread
http://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/Enable-Hardware-virtualization-on-y510p/m-p...
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How to stop document posting when filling setup tables for logistic app.

Hello Boys
I've read several threads and weblogs about data extraction from logistic applications i.e the ones which uses the infosources like 2lis_13_vditm, 2lis_02, 2lis_03, etc, etc,and now almost every thing is clear to me but one thing: how do i actually "close the system" while the process of filling setup tables i.e MC03BF0SETUP, MC03BX0SETUP, MC13VD0ITMSETUP, are running?
So I have some questions
1) which is the procedure to prevent users from posting documents for an specific logistic applications (02,03, etc.) in a source system
3) For example when using TC OLI9BW for statistical setup from billing documents (app no. 13), there is a check box "Block all billing documents?". Is this option for such pourpose?
4) Every logistic applications has a different procedure??
thanks (with points of course) for any help
rgds
A. Garduñ

Hi Azael:
Q1: usually the BW team will inform basis/secuity about the deletion and performing of setup tables. they will fix a time after the normal hours where in all users are locked out from the system. in a sense, R/3 will be down for that time.
2. the check box which says, "block documents" is meant to block posting. for eg: you are doing setup tables late in the evening, and you assume that no user is assessing the system, but if there is a user(just by chance) who is doing some posting and when he try to save it, the system will not allow him to do save as you cheked this option.(normally we donot use this)
3. some LO may have different procedures, for eg IM. but most of them have the same functionality.
hope it helps.
assign points if helpful
kalyan

How to Enable AHCI mode in BIOS for HP Pavilion g6 1240se

i want to enable ahci but no option about it in bios

Step 01: Restart the Notebook and start tapping F10 during the startup
Step 02: Please go to System Configuration after entering the BIOS
Step 03: Check if you have SATA Emulation under System Configuration
Note: If you dont have SATA Emulation we cannot choose AHCI Mode option
Step 04: If you have SATA Emulaion, highlight the same and select the relevant option Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

How to enable Quick Time Export in photoshopCS5?

Hi..
I m trying to render a time lapse video on PS CS5 and the process works well up until the export window. When i go there the first option under file options, quick time export, is unavailable( grayed out). The only available option is Image sequence. What do i have to do to enable the quicktime movie creation or any other movie format for that matter?
i am using photoshop cs5..
my operating system is windows7.
Thanks in advance.
kalyani

This usually means that the relevant auxiliary components (qtserver32.exe etc.) were not launched/ initialized due to being blocked by some external influence liek a virus scanner or a firewall or the user not having sufficient privileges to launch system level services and load drivers... and of course you will need to install Quicktime in the first place.
Mylenium

T540p: BIOS setup not starting

Hi,
I have a brand new T540p with Windows 8.1. I did all configurations needed, Windows is working.
Problem:
Pressing F1-Key (+ Fn or not) during system start doesn´t start the BIOS-Setup. Instead Windows is starting.
My questions are...
- Is there any problem with my T540p?
- How can I start the ThinkPad BIOS-Setup?
- If it is not possible to use the ThinkPad BIOS-Setup: What are the alternatives to configure BIOS?
Thanks a lot!

Holding Shift while invoking reboot from within Windows will get you to the appropriate "Choose an option" screen as well.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

MSI X58 PLATINUM, the latest bios and how to enable turbo boost

1) Wich motherboard is ? MSI X58 PLATINUM or MSI X58 PLATINUM SLI ?
2) What is the lastest version Bios and where can i get ?
3) How to enable turbo boost in this motherboard ?
4) Thanks so much guys.

My bad. The obvious lack of your self research got the better of me. I do not take helping, if I can, lightly. This is new technology, & a lot of expertise is in short supply. I downloaded the manual on this board & read the bios section, & in CMOS Setup, you should find an "Enable" setting for Turbo Boost. If you don't, please contact MSI Tech Staff @ http://ocss.msi.com.tw Also, (in your manual), is a reference under "Intel Turbo Boost Tech", which clearly states "for further information please refer to Intel's official website". By your original post, CPU-Z says it's an SLI? What did you buy? Does it say on the retail box? At MSI's website, the X58 Platinum (not the SLI), has version 1.0 bios offered in three global region zip files. M7522v1.0 Euro.zip, M7522v1.0 ASIA.zip, & E7522v1.0.zip. J.T.N. is correct, the SLI board takes something else. Are both boards bios's compatable? I have no idea. Recommend step one as to confirm with MSI what board you truly have & go from there.

Satellite X200 - How to find BIOS setup for Intel Storage Matrix?

Hi everyone,
I'm willing to enable the Matrix Storage feature on my Satellite X200-24X. The problem is I can't find any relevant option in the BIOS setup...
Thanks !

Hi
The Intel Storage Manager is a driver and not an option in BIOS. The only option that you have in BIOS is the HDD access mode. There you can change between AHCI and Compatible.
For AHCI mode that is faster you need Intel Storage Manager driver. For Compatible mode you dont need additional drivers.
You want to know how to install Storage Manager? Just use the forum search, you will find hundreds of results. ;)

Unable to Enable Intel VT-x Via BIOS Setup: (Option no-longer Available?)

I have been using VMWare Workstation (V9.0.4) with my present motherboard for about 1 year. For no apparent reason, I can no-longer do so, because "Intel VT-x" is not enabled. When I enter the BIOS setup, the option that used to be there to enable "Intel VT-x" is no-longer present. I am wondering if the latest BOIS Version (H.90) is the culprit? If it is, is there a way to "roll back" to the previous BIOS version?
Motherboard BIOS Version: H.90 (Motherboard: X79A-GD45 Plus). Windows 8.1 (64-bit)

@Svet: I checked and have (embarrassingly) found the problem. I was unable to scroll down in the BIOS settings menu for Overclocking, and therefore could not "see" the option I was looking for. I adjusted the sensitivity of my mouse(?) and all of a sudden all is well. I found the option concerned and enabled it (how it had become disabled after nearly 1 year, I do not know) and all is now as it has been for a year. Weird!
Many thanks for your willingness to assist, and sorry for wasting your time. Cheers.
(Is there a way to mark this issue as "Solved" as in some other forums?)

How to enable enable Quick Edit button in Discussions List (SharePoint community).

I wonder how I can enable the Quick Edit button in Discussions List (SharePoint community), see attachment. This is no problem on other list in SharePoint. I need to import data that I have in a Excel sheet from and old forum (not Sharepoint). So if I can
enable Quick Edit, I will just copy data into my Discussions List. Hope somebody can help me???

Hi,
Please execute the commands below to enable Quick Edit feature in Discussion board list:
$web = get-spweb "http://sp/sites/sitename"
$list = $web.Lists["listname"]
$list.DisableGridEditing = $false
$list.Update()
Now you could use Quick Edit in Management view.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

MOVED: What we need - a guide on how to flash bios, setup bios, and raid

This topic has been moved to AMD64 nVidia Based board.
What we need - a guide on how to flash bios, setup bios, and raid

Like How to Flash Bios NVidia 64 & Award Bios
Syar2003 has also documented flashing methods in the Bios Collection. *Updated * 7025 1C3 EasyBIOS [r.2] thread
BIOS Guides pretty complete as far as Neo3 250/Ultra but as none of the pps who have been involved in the stickies have neo4's that chipset is lacking.
Raid Guide
If any1 wants to re-write /update these please feel free to write up the topic as a new thread thread & if popular we can add a link to the thread.
Volunteers welcome

How to enter Bios Setup Satellite 4030?

I'm searching for Informations how to enter the Bios Setup.

To enter BIOS settings use ESC button.

How do I enable TPM in the bios on Product name: HP Pavilion dv7 Notebook PC

Hi,
I have run into a problem trying to enable MS Bitlocker on Windows 8.1 on
Product name: HP Pavilion dv7 Notebook PC
BIOS version is: F.1C
In the Windows UI, the TPM (Trusted Computing Module) management console says that I need to enable TPM in the BIOS.
Issue:
There does not appear to be any proverbial "on" switch in the BIOS for TPM versions 1.2 (or 2).
Question:
Anyone out there know how to resolve this?
I know there may be a way to get around this using group policy on the machine or to buy a USB key solution.
Looking for the hardware solution in the laptop if possible please.
Thanks in advance for any help.

Hi:
As far as I am aware, HP consumer notebooks do not have a Trusted Platform Module chip.
Check the device manager...if there is a TPM chip, there will be a Security Devices category in the device manager, and you would see the TPM chip listed under that category.
If not, then there isn't one.

How to Enable Quick post in BIOS setup?

Similar Messages

Maybe you are looking for