How to enable reading 4GB Ridata SDHC card on T61 7663-BC2 with Ricoh R5C476 controller

Folks,
I have searched and searched but nothing works from the given driver updates
Pls help

Hi all,
a simple Google search reveals that XP needs an Hotfix to enable SD HC use.
Hotfix
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Similar Messages

How do I write to an SDHC card? My iMac doesn't seem to recognize it.

How do I write to an SDHC card? It read a couple of my cards from camcorders, but I have others that it won't recognize. I don't see any software for writing. I can read and write CDs OK.

Hi -
My two cents -
have +the camera+ format the card whenever possible. It will save you many, many headaches later.
There have been many posts about memory cards with corrupted directories and the machinations required to recover the media.
I make it a Standard Operating Procedure - once the media files are off the card, the card gets formatted by the camera before the next use.
MTD

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder

How to change the permission of a folder of a website hosted on Microsoft Azure. I would like to know how to enable read write permission for this folder
Regards,
John

Hi,
Please try to setting Folder Permissions on Web Publish, and then deploy it with Web Deploy, as far as I know, if we do that, Web Deploy will use the SetAcl operation to change permissions. Please have a look at the article below.
#http://sedodream.com/2011/11/08/settingfolderpermissionsonwebpublish.aspx
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to enable read and write to thumb drive,how to enable read n write on thumb drive

How to enable read n write to my thumb drive

Format it for apple or Fat32 or exFat.
Check the write protect switch on the thumb drive.

HT1391 How can I read and print digital booklets that are downloaded togheter with the recordings I purchased

How can I read and print digital booklets that are downloaded togheter with the albuns I bought?

cu is right.
classloader returns the URL of your resource. You can the jar using something like the following...
ClassLoader classloader = this.getClassLoader();
url = classloader.getResource("your_resouces...");
if(url == null)
System.out.println("cannot find resource ");
return null;
String jar = url.getFile();
jar = jar.substring(jar.indexOf("/")+1, jar.lastIndexOf("!")).replace('/', '\\');
obviously, this code snippet works on windows only. Now you have the jar file path. I use Jar file classes to access the jar file. (e.g. you can search for each class files)
Ming

E65 and 4gb Micro SDHC card

Hi out there
I bought a 4gb Kingston Micro SDHC card for my new E65, but the phone don't regognize the card.
Can the card be used with the phone, and if so - how.
My phone has softwareversion 3.0633.69.00 from 06-02-08
Thanks in advance

The card cannot be used with the E65.
The E65 only supports the micro SD standard so it's maximum is 2GB. 4GB cards are the newer SDHC standard and cannot be made to work on older hardware.

My HP Pavilion Elite m9058n PC's Card-Readers Stop Reading/Recognizing My SDHC Cards

Just about 2 weeks ago my HP Pavilion Elite m9058n PC's card readers stop reading or recognizing my memory cards used to store the pictures I took. They used to be able to read my SDHC cards (Sandisk, Kinston, Panasonic) before. Don't understand why they stop reading, even recognizing all of them. My O/S is Windows 8. The initial symptom was the options for processing the inserted cards seemed to be showing up slower than before and then I had to withdraw the cards and re-insert them so that such option screen appear. Then later on it didn't show up at all. And when I checked "This PC" ("computer" or "my computer" in other Windows versions), I didn't see the DRIVE LETTERS, like G, K, or J, etc. for the memory card readers any more. Now if I connect my camera directly with my PC, I see on the camera model number on "This PC" screen.
Please help me understand what this problem is and kindly provide me with the best solutions you can.
Thank you very much.

Hi,
I understand your card reader is not working as you have previously experienced. Take a look at the following document, Using and Troubleshooting Memory Card Readers (Windows 8), specifically the "Resolving issues with memory cards" section. Hopefully there will be something in there that is useful for you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Expresscard reader for CF & SDHC cards

I'm looking for a card reader for my Macbook Pro that can read compact flash cards (from my DSLR) as well as the SDHC (from my Blackberry 8330 curve) and hopefully some of the other common photo cards. But from my cursory searches, I'm seeing only one type of reader or the other. Are CF and SDHC card formats incompatible in a single card reader? Or am I just not looking hard enough? Much appreciated!

I have never seen a single reader for the Expresscard slot that does both CF and SD. I think the issue is that the CF card won't fit in the 34mm size. So that would make for a much bulkier and less visually attractive reader The CF readers already stick out quite a bit. Now it would have to be even bigger to get the SD connector. You could get a CF reader, then get a SD-CF adapter. But that's still technically two adapters.
Me personally, I just gave up and got a $20 USB reader that does CF, SD, MS and XD. Unless you're transferring a lot of data from the memory cards, this might be the most cost effective. Otherwise, for speed, you'll have to get separate Expresscard adapters. However, you'll want to check the specs carefully as some of the readers use the USB interface of the Expresscard slot instead of the PCI interface and so might not get faster transfer rates than an external USB reader.

How do I correctly wipe an SDHC card?

I transfer all the MOV files off of my JVC HM100U and then put the card back in the camera. It usually tells me that a recovery is required before recording/playback... so I do and it takes a minute but then the camera's ready to record again. But then I notice that on a clean SDHC card (16GB) I should have 56 minutes of recording time... it only says I have 52mins. I then format the card and everything is fine.
Is there a way to do this where I don't have to "recover" or "format" my cards every time?
jer

Hi -
My two cents -
have +the camera+ format the card whenever possible. It will save you many, many headaches later.
There have been many posts about memory cards with corrupted directories and the machinations required to recover the media.
I make it a Standard Operating Procedure - once the media files are off the card, the card gets formatted by the camera before the next use.
MTD

PSE 12 cannot read Inov8 8GB SDHC card

Am using Nikon D80 and this card worked fine, took a lot of photos, but now I find that Photoshop Elements 12 cannot read the card.
Any advice, please ?
MCO

Are you taking the card from the camera and putting it in a card reader, or connecting the camera directly to the computer?
As PSE uses your hardware to read the card the most likely problems are a faulty card, faulty card reader, faulty connector cable or socket.
Try connecting the card by a different method (e.g. if plugging your camera in, remove the card and plug it into a card reader, or vice-versa).
Are you able to try to read the card on a different computer? If so with what result?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Nokia 6280 how to enable read/edit for jar to file...

how do I allow jar files to acces/edit/read files on my nokia 6280? when I try to allow it, its doesn't let me, please give me a guide on how to allow the jar files to acces/edit/read the files on my nookia 6280 thank you.
sorry if its the wrong topic.
Message Edited by vasilevich on 07-May-2008 10:46 PM

Dats simple
select ur application click option
select application access menu
after dat select add edit data select allow access to ask always or ask once or always allow(allowed only apps is download frm a secured source)

How to enable reader mode in safari

hi. I wanna enable safari reader mode in yosemite but i can`t find this option.

Move the mouse over to the left of the search/address box and you should see 3 horizontal lines.

How to enable Reader Mode on a specific web page?

I've downloaded the Firefox Beta to my Samsung Galaxy Nexus but am having trouble using Reader Mode. First, Mozilla's instructions advise using a "Menu" button on my device, but there is no such button on my Nexus. When I open a web page, such as an article I want to read, sometimes the book icon appears in my address bar, so I can click it and open the page in Reader Mode, but usually that icon does not appear and I can't use Reader Mode. Any suggestions?

You may be right, but it's frustrating: When I can get Reader Mode to work as advertised, I like it much better than any of the add-ons I've seen; and there are so many add-ons that it's daunting to consider evaluating all of those that seem similar to Reader Mode.
I'm hoping that someone can suggest a means of making Reader Mode work for me, as it's supposed to do. If no one comes up with such a solution, I guess I will have to plunge into the add-ons.
Thanks for your suggestion.

How to enable enter button on keyboard for action on jsp page with adf11g

hello,
i have a login page, when i press login button with mouse it is working.
But i want to click 'enter' button on the keyboard when inputbox is focused.
For example i entered user and i entered passsword and click 'enter' button on keyboard for login action. How can i do this easily with adf11g ?
thanks for interests.

i tried but on af:form we have not defaultAction. i saw, there has defaultCommand i tried this but not acceptable by warning that about, "no id or naming containers". We has an id on command but what is naming containers.
Other question is,
How to write javascript on the adf tools? We have not any, "onClick, onPressed vs..".
Thanks for helps.

How to properly read data from one DAQ-assistant and write simultaneously with another DAQ-assistant (which is inside a loop)

Hello.
I'm a newbie working on my Master's thesis conserning a project that is based on old G-code made by another newbie so bear with me.
I need to create a sequance of output controls. For this I'm using a for loop that eventually creates two triangular ramps during a period of 90 seconds. I've confirmed that this function works properly by measuring the actual output of the DAQ-decice (NI USB 6353).
The problem is the following: During this controll-cycle I need to simultanously collect data from the same DAQ-device. At this point there is only one DAQ-assistant output-block in the main loop of the program and all the signals are derived from it to where they are needed.There is a case-structure (the bottom case structure in the picture) that contains the functions needed to collect the data during the test cycle. However these two actions, outputting data and inputting data, are not synchronized in any way which may be the reason why I get the 200279 error or alternatively the 200284 error during the test cycle. I've tried changing the sample rate, buffer size and the timeout time as adviced but nothing seems to help.
What would be the simplest way to solve this problem?
Help is greatly appreciated!
Attachments:
problem.jpg ‏206 KB

Thanks for quick reply.
However, I did try it (see the picture) but I still have a problem: I only get 100 samples / channel during the test sequence (all from the first seconds of the sequence) in total even though I've set the data aqcuiring DAQ-assistant as "continous" and "samples to read = 95k" and rate is 1000Hz.
Edit.
And lastly, I have trouble adding this "extra" DAQ-assistant to the vi. because I get an error about a resource (The 6353) being reserved, even though I connected a false constant to the "STOP" -input of the main DAQ-assistant.
Attachments:
is_this_what_you_meant.jpg ‏212 KB

How to enable reading 4GB Ridata SDHC card on T61 7663-BC2 with Ricoh R5C476 controller

Similar Messages

Maybe you are looking for