How to enable resource sharing with complex AEBS setup

I have a complex AEBS + Netgear network configuration that I am trying to enable resource sharing on. The Netgear router is necessary because it provides excellent per-user parental controls and content filtering that the AEBS lacks. The setup is operational (network connectivity works as expected), but I cannot figure out how to enable cross-network resource visibility and sharing.
Here is the network configuration:
|Vz Fios PPoEE |
|
v
|___
|AEBS|
| __Mac Mini (wireless)
| __AppleTV (wireless)
| __Wii (wireless)
| __MBPC2Duo (wireless)
| __WinXp PC1 (wired)
|
v
|______
|Netgear|
| __WinXP PC2/Printer (wired)
| __WinXp PC3 (wired)
| __iBook (wireless)
| __Vista Laptop1 (wireless)
| __Vista Laptop2 (wireless)
The Mini, AppleTV, Wii and MBPC2Duo all connect wirelessly with the AEBS. The Netgear router is wired to the AEBS. This in turn has 2 wired clients and three wireless clients as illustrated.
The Netgear router receives an IP address assignment from the AEBS (in the 10.0.1.x range) via DHCP and in turn assigns IP addresses (in the 192.168.1.x range) to attached clients via DHCP
The setup is operational and operates flawlessly --network-wise. However, I now need to enable resource sharing as follows:
1) Setup the Mini as the media hub, configured to allow:
a. storage of all iTunes, iPhoto, iMovie and garage band content to an attached external hard drive,
b. sharing of content on the Mini with iTunes on each computer (Macs and Pcs) and the AppleTV
2) Share the printer attached to Windows XP PC2 with all computers (Macs and PCs)
Questions:
1. Is this possible with this network configuration?
2. If so, how would I configure the relevant elements?
3. Is it better to attach the external media storage to the AEBS vs attaching it to the Mini?
Thanks!

Thanks Tesserax. After some digging I was able to find bridge mode config instructions for the Netgear router.
Follow-up question:
Given my desire to centralize media access via the Mac Mini, what is the best way to set up my media storage device (320G HD)?
I see the following options:
A. NAS device via USB 2.0 connection to the AEBS, or
B. Supplemental hard drive on the Mac Mini via USB 2.0 or Firewire.
Thoughts/suggestions?
Thanks!

Similar Messages

In finder, it says that I am shared to a pc which I didn't know about nor do i know the pc, how do I stop sharing with it?

In finder, it says that I am shared to a pc which I didn't know about nor do i know the pc, how do I stop sharing with it?

I gather that you are seeing other "pee-seas" (and | other hosts) in MAC OSX Finder UI under SHARED ? T/F ?? The Finder is reflecting what others are sharing.
In any case consider these items:
1) Other hosts on your network (local) have ITEMS (folders and structures) that they themselves are sharing
with anyone on there network and to others outside who will access them via a specic host nae or address. KInda like your mate who has some files he wants to share with you. You connect to his host (machine) either by a host name (yourmate.com), an IP address (33.33.33.11) or on your local area network usually over Bonjour (yourmates_macbookair.local).
Simply THEY ARE sharing their stuff with you and this your MACs FINDER makes then apear under the SHARED parion of the side bar in the UI. This is likely what you are seeing
microsoft platforms have their users share DIRECTORIES mainly through the SHARING properties for that opject. YEp.. and then you can at a minimum SEE it . HOwever this doesnt mean you can access the contents.... This is all familiar to most.. nothing to be concerned about.
Probably no need for concern.....
(IMO), its amazing the number of PC users that unknowingly expose their folder contents on a hotel WIFI or ETHERNET network... its astonishing....!
2) YOUR CONCERN that you are sharing your stuff:
I'll hazard a guess that form you minmal description that you may feel that others on your network can SEE YOUR STUFF?? Bt Default, any user can see ANYTHING you have put in your ~/Public folder (theis is your Public folder in your home directory. Usually they can ONLY read whats there unless you have gone out of your way to change the ACCESS CONTROL LIST (ACL) to an access for others other than READ ONLY.
An extention so to speak of this sharing is the concept of a "DROP BOX" that is also maintained by default in your homes public folder (~/Public/Drop Box). This is very useful for people to GIVE you their files by DROPPING then into this ~/Public/Drop Box folder.
So THIS folder is exposed for all to see on your local network.
How to stop anyone seeing anything?.. easy..
Step 1: go to SYSTEM PREFERENCES/Sharing/ and UNTICK the "File Sharing" service. Its probably already unticked. This will stop exposing anything that you have shared to others. pee-sea users may need your to enable SMB/CIFS TO READ YOUR STUFF. YOU WONT HAVE THIS ENABLED UNLESS YOU DID IT YOURSELF. Additionally there are windows .apps to read mac file systems too... so stopping all fie sharing will do the trick
Step 1.1: if you dont want others to see your ~/Public folder either then simply select the Public folder in your finder, open the Finder inspector (+i), open the disclosure triangle for "sharing and permissions" and then set the access by others to "NO ACCESS"
Step 2: while you are in SYSTEM PREFERENCES/Sharing/ and UNTICK the "Remote Login" and "Screen Sharing" services. Its very likely already unticked. This will stop exposing remote services such as ssh and vnc anything that you have shared to others.
Step 3: for extra go to SYSTEM PREFERENCES/Security/Firewall and enable any setting for network here that you want to disable or filter... seek out these apple discussion forums.. tonnes of stuff here on his.
Others reading this thread will also have good advice and opinions.
Post your results for others to see.
Warwick
Hong Kong

How to enable internet sharing on mac book to use my iphone?

how to enable internet sharing on mac book to use my iphone?

Hey PPRoy,
Thanks for the question. The following article may assist in achieving your goal:
OS X Mavericks: Share your Internet connection
http://support.apple.com/kb/PH13855
Thanks,
Matt M.

How to enable Kerberos - Shared Services and Workspace

Hi All
I'm trying to enable Kerberos SPNEGO with WebSphere 6.1.0.31. I've protected the urls.....and i can see the handshake happening in the trace logs.....
Shared Services SSO is working fine if i use the option of Get Remote user info from http header.....
But workspace doesn't seem to accept any of the options given $REMOTE_USER$, $HTTP_USER$.
Can some please let me know how to do this....? Or is there a way to change the header information?

Thanks john For ur reply ..i have seen these documents long ago ..i am asking about Shared services and workspace architecture and how these are functioning and where we can find out communication error and slow login issue with workspce and shared services.. How authentication is log on ..is there any machanisam they are using for authencation ...We are using OpenLadp ...
Ex :1.Per suppose log on to workspace that request goes to shared services directory and it will check whether that user is exists or not on Shared services tables ...here what kind of alogirtham using to aunthenticate user...How we can diagonse this process taking to much time,,,is there any specific logs related this (If logs are exsits how we can find out)...
2.Once authencation done successfully and responce send to workspace and populate workspace home page...then i click on application button (FM application) and it's taki ng to much time to load HFM page.To this where we need to look whta excatly problem? what are logs file helpful to us to diagonse..

How to enable local sharing in iphone

How can I enable local sharing in iPhone 4S?

Hi Matt, I need to send IPA files downloaded on my iPhone to my iPod, I don't use iTunes and I was told that it's possible to send files wirelessly via local sharing.

HT202213 how to enable home sharing itunes 11

The new iTunes doesn't have anything on the side, how do I enable home sharing? Im on a mac

File, Home Sharing, Turn on home sharing. Enter you apple id and password and create. Then link your other devices to the same home share

How to enable Print Preview with the Envy 5530

How to enable Print Preview on the Envy 5530

Hi,
A print preview is not offered by the current HP software as older software versions provided.
A preview is only available if the application you are printing from include a such, it is not provided by the printer driver itself.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to enable resource admin$

Hello, i can't enable admin resource Admin$ on windows 7. On the internet I found several advices, but it didn’t work, i tried:
1) in registry I put HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ System LocalAccountTokenFilterPolicy=1
2) I turned off Firewall and Antivirus
3) I enabled File and Printer Sharing In Microsoft Networks
4) in GPO:
- Computer Configuration > Windows Settings > Security Settings > Local Policies > Security options >
Network access: Sharing and security model for local accounts -
Classic - Local users authenticate as themselves - simple file sharing is disabled
User Configuration > Administrative
Templates > Windows Components >Network
Sharing > Prevent users from sharing files within their profile = Disabled
5) I enabled services: DNS Client, Function Discovery Resource Publication, SSDP
Discovery, UPnP Device Host, Remote Procedure Call (RPC).
I used command: net use \\hostname\IPC$, it works, but admin$ and C$ no.
What is the problem? What I can do next?

Hi alibek555,
You can check AutoShareServer and AutoShareWks registry values to make sure that they are not set to 0:
a. Click Start, click Run, type regedit, and then press ENTER.
b. Locate and then click the following registry sub-key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
c. If the AutoShareServer and AutoShareWks DWORD values in the LanmanServer\Parameters sub-key are configured with a value data of 0, change that value to 1.
If they are not existed, you can add new registry values to create them.
d. Quit Registry Editor.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to create web services with complex objects as parameters

Hi,
Not sure if this is the right place, but...
I'm using Netbeans 5.5 and trying to learn web services.
Creating a simple web service with simple parameters like strings and integers is nice and easy. I'm now trying to take the next step, and create a web service with a more complex schema as a parameter.
I've tried two approaches, and hit dead ends on both:
(1) Define my complex schema as an xsd file, and then create a WSDL file. Creating the schema and saving it in my EFB project works fine; when I try to create a new WSDL file, the IDE gives me a button to import external schemas - which is where the problem is: the Browse simply won't find my newly created schema file.
(2) Define a Java class (in this case, it's a fairly simple example containing a single ArrayList), and then use the IDE to generate a web service from Java. The IDE does this fine, but I now have no idea how to consume or test the web service - I don't know where to look for the WSDL that has presumably been generated, and I'm also a bit iffy over what answers to give the WSDL creator about port names etc.
Ideally, I'd prefer to get approach 1 to work - can someone point me in the direction of a sensible tutorial for these things?
(Happy to carry on using Netbeans 5.5 or to revert to Sun Studio Enterprise, which I was playing with before.)
All help appreciated, Thanks

- For NetBeans related questions, nbusers mailing list is more suited. It is often visited by NetBeans experts.
http://www.netbeans.org/community/lists/top.html
...[email protected]
The NetBeans users mailing list. General discussion of NetBeans use, this is the place to ask for help and to help others.... (There is a 'Subscribe' button next to the above that you can use to subscribe to the list).
Can you try posting this question on nbusers list?
- SJSE 8.1 is based on an older version of NB (NB5.0).
You should definitely continue with NetBeans, since all development is now being done in NetBeans; all the major JSE modules have been moved to opensource at netbeans.org and are all being developed there. There are as yet no future plans to work on further releases for JSE.
Please check out http://www.netbeans.org for more details.

How to enable editing sites with SharePoint Designer

HI,
when i try edit my web part in SharePoint designer I receive a error:
“Web Site Editing is Disabled. This web site has been configured to disallow editing with SharePoint Designer. Contact your web site administrator for more information.”
I never disable this. When I search for this error, it’s the same thing, how disable editing SharePoint designer… but I want ENABLE.
I try search the line “DisableWebDesignFeatures=wdfopensite” in my Onet.xml files but no exists.
I need edit a file, how? Please explain me, it’s for my work.
thanks
Hernandezz

SharePoint allows you to create custom web parts to help you provide highly customized solutions to your clients/users. The properties of these web parts are added by default but to
further customize the solution, you can also create custom properties. The following example demonstrates how to add a custom dropdown property to a custom webpart.
// Create a Enum for Languages
public enum LanguageByEnum
       English = 0,
       French,
       Spanish
Sharepoint migration 2010
Cheers, Eliza

How to fix Home Sharing with new iOS 7 upgrade

My Home Sharing wont work now I have updated my iPhone and iPad to the latest iOS. How do you fix this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)

How to bundle resource files with a plugin

Feel like I'm missing something obvious here.
Trying to bundle a zip file in with my (c) plugin, then access it in code.
I've added it to the Resources group of my project in XCode, which has caused to to be copied to the Resources folder of the .InDesignPlugin package.
Is that the correct way to go about it? How do I then access it in code?
Thanks

Hi
Are you trying to use ODFRC compiler?
Unfortunately i don't know how to create proper resource for compressed data. I've found in SDK (CoreResTypes.h)
#define kPackagesRsrcType 'PCKS'
and
#define kBinaryBlobType 'BBlb' //taken from DynamicDocumentsExtrasDefs
But don't know the macro to create that kind of resource.
The good thing is that you can cheat a bit and use PNG resource, since this is also binary data.
Just define your zip file as PNG resource and use IPMStream to write the data to the disk.
All you need to do is to define in your .fr file path to the zip which is relative path from your project file:
#define kYOUR_ZIP_FILERsrcID 15
#ifdef __ODFRC__
      resource PNGA(kYOUR_ZIP_FILERsrcID) "../../your_zip_file.zip"
#endif // __ODFRC__
and in your class read the resource and write it into a file:
        WideString theFilePath("/Users/userName/Desktop/theFile.zip");
        const IDFile theFile(theFilePath);
        RsrcSpec theRsrc(kYourPluginID, kPNGArtRsrcType, kYOUR_ZIP_FILERsrcID, kFalse);
        InterfacePtr<IPMStream> rsrcStream((IPMStream*) StreamUtil::CreateResourceStreamRead(theRsrc, kFalse));
        InterfacePtr<IPMStream> fileStream(StreamUtil::CreateFileStreamWrite(theFile));
        fileStream->Open();
        fileStream->SetEndOfStream();
        unsigned long totalIBytes = 0;
        unsigned long totalOBytes = 0;
        unsigned long iSize = -1;
        unsigned long oSize = 0;
        while (rsrcStream->IsReading() && iSize > 0)
            unsigned char data[1024];
            iSize = rsrcStream->XferByte(data, 1024);
            oSize = fileStream->XferByte(data, iSize);
            totalIBytes += iSize;
            totalOBytes += oSize;
        rsrcStream->Close();
        fileStream->Close();
Regards
Bartek

How to enable TCP Wrappers with SMF services?

I am using a site.xml file to enable/disable services during a Jumpstart configuration. This works great.
However, I can't yet figure out how to configure the various properties of those services, such as enabling TCP Wrappers for a service. I can set the properties of a service and verify that they are set, but a "svccfg extract" does not capture that information.
Is this a short coming of svccfg extract? Or are the properties of a service stored and configured elsewhere?

That will work, as will any path underneath
/var/svc/manifest.Got it working...Exported the inetd configuration, set tcp_wrappers to false, dropped inetd.xml into my jumpstart tree, jumped a box, and tcp_wrappers came up enabled by default for my inetd services!
What is the difference between the /var/svcs/profile and /var/svcs manifest directory? Is profile for enabling/disabling services and manifest for service configuration?
Does /var/svcs/profile/site.xml and /var/svcs/manifest/whatever.xml get read on every system boot? If not, what is the appropriate procedure to "reinitialize" smf if you want to change the existing behaviour by having it reread those files?
Hmm. The defaults get written on the inetd serviceI believe, so exporting that would give you the
fragment
you want.It did, and I was able to accomplish what I needed to do.
Sorry that it's such a slog in the meanwhile.Will there be something before FCS in a couple weeks?
I can definetly see the managability and robustness of SMF. It's just going to take time to learn it, and documentation is needed for that.
Thanks for all your help!

How to create resource calendar with Cal server 6.1

We are running the JES 2004Q2 release of Cal server and we are looking at creating some resource calendars (meeting rooms mainly). The documentation seems a little sparse on this...
Part of it suggests that we have to run commadmin to create the resources and then either csresource or cscal to create the actual calendar. However, we don't use commadmin to create users (as recommended by Sun) as it can't create users in a particular OU. Can someone who uses resource calendars tell me how they created them?? I'm lost...
Ideally, a ldif of a working resource calendar would be handy to have a look at - and some info on how to create the actual calendar!
Thanks

Hello,
Wnen you create web service on first page move the slider to set to the develop service.

How to enable screen pops with UCCX 8.5

I have done a lot of reading on this, but I'm not finding enough information on it to help (or at least not in a way that I understand). I am trying to create an HTML based screen pop that would contain Enterprise Data pulled from the Microsoft CRM record of the person calling. Within that screen pop would also be a link to the actual CRM record for the agent to follow.
I've read things like need to use HTTP GET and HTTP POST, but I don't see those as steps within the Script Editor.
The web page would either be using the integrated browser in CAD or a new IE (or other) browser window, external to CAD.
Is this possible? If so, how would I, at the very least, get started.

I have been able to create an "Agent Notification" action that it works (pops up message box at Ringing and at Answered) and I've created a "Launch External Application" (at Ringing) step to open IE (as a test) that also works so I know I have my rules and conditions figured out. That means the problem has to be with my "HTTP action" step or whatever allows that action to work. Following steps I found in the guide, here is my HTTP action step:
Name: HTTP:Action_ScreenPop
Protocol: http
Method: Get (also tried Post)
Host: www.google.com
Port: 80
Path: search
Browser tab: HTTP Web Browser Tab 1
Request Data:
Name/Value/Value Type
hl/en/UserDefined
source/hp/UserDefined
q/cisco systems/UserDefined
gbv/2/UserDefined
oq/cisco systems/UserDefined
With all of those settings, I can hit Test button and I get an IE window to pop up that takes me to a google search for Cisco Systems. However, going through the process live, I get nothing. Any thoughts on what I'm missing?

How to enable resource sharing with complex AEBS setup

Similar Messages

Maybe you are looking for