How to enable sent item for resource maillbox.

Hello Team,
I have access to shared mailbox. I need emails sent from shared mailbox be sent to "Sent item" folder.
Does anyone knows the option to enable this feature.
Thanks
Srinivas

Hi,
To force Outlook to store messages in the Sent Items folder of that same shared mailbox when the messages are sent from a shared mailbox, please follow the steps below:
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.
For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft
Knowledge Base:
322756 How to back up and restore the registry in Windows
A. Install the Outlook 2010 hotfix package that's dated December 14, 2010. For more information about this hotfix package, see the following Microsoft Knowledge Base article: 2459115
Description of the Outlook 2010 hotfix package (outlook-x-none.msp): December 14, 2010
B. Enable the hotfix by adding the DelegateSentItemsStyle registry entry, and then set the entry's value to 1. To do this, follow these steps:
1. Click
Start, click Run, type regedit, and then click
OK.
2. Locate and then click the following registry subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences
3. On the
Edit menu, point to New, and then click DWORD Value.
4. Type
DelegateSentItemsStyle, and then press Enter.
5. Right-click
DelegateSentItemsStyle, and then click Modify.
6. In the
Value data box, type 1, and then click
OK.
7. Exit Registry Editor.
We can learn more information from this kb below:
http://support.microsoft.com/kb/2843677
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

How to setup sent items for IMAP in Apple Mail

I am changing my aple mail email account to an IMAP account from a POP3.
When I do this I lose my sent items. I was able to import my sent items back in, but when I try send a mail it does not register in my sent items. It shows that I did not send anything even though I did. Is there something else I need to change in my IMAP settings to get this to work correctly?
Message was edited by: gazo

Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these *folder & file* to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

CVP Call Server: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability

Hi All;
I am gettting the below messages on the CVP Call Server version 8 and actually the Call Server is out of service, any advise?
The CVP PG is up and activated, the CVP Call Server registered on the Gatekeeper and I saw this on the gatekeeper, also the VXML Server is UP. But when I try to browse the statistics page using the Operational and Consol Server, then it also gives a message that not able to reach it, also its status at the operational and consol is down. Below are the messages I see it:
At CVP Call Server:
14:26:41 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
14:27:26 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
Unable to retrieve statistics for Unified CVP Call Server with IP Address: 10.180.22.137 and Hostname: vivadrcvp at this time.
14:26:41 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
14:27:26 Trace: INFO: H323CallMgr::sendRAI: Successfully sent RAI for resource unavailability
At the Operational Console:
Unable to retrieve statistics for Unified CVP Call Server with IP Address: 10.180.22.137 and Hostname: vivadrcvp at this time.
What could be the reason? Is it license?
How can I know if the license if not valid?
Regards
Bilal

Dear Geoff;
I am facing the same thing, but in the OAMP is shown to be down and not able to get any statistics on this CVP Call Server.
Actually the PG01, PG02 and PG03 are enabled in the router registry (while PG01 for CUCM PG, PG02 for CVP Call Server PG and PG03 for the Media Routing PG).
It was working before and I was receiving calls on it, but suddenly this happened.
Actually, an upgrade happened from version 7 to version 8 and we imported new licenses for the VXML Server but did not import new licenses for the CVP Call Server. Could be a license issue because we have to import the new license to change from version 7 to version 8?
Thanks in advance for the help.
Regards
Bilal

Exclaimer manager signature does not update sent items for outlook 2013 clients when using cached mode

Hi
I have Signature Manager Exchange Edition 2.0.3.0 installed on the hub servers.
I have enabled Sent Items update.
some clients are not getting signature update in the sent items of outlook while using cached mode.
from OWA, and MS Outlook when connected online, the signature is updated in the sent items.
I have two CAS servers and two mailbox servers. all with Exchange 2013 SP1
I tested each CAS server for the URLs of Autodiscover and EWS, with no errors or warnings.
I also test Autodiscover through
https://testconnectivity.microsoft.com . I go successful result.
Outlook clients are updated to the latest version 15.0.4701.1000
for outlook clients; I deleted outlook profile, deleted outlook folder in the user profile, re-created the outlook profile, with no luck.
from Exclaimer event logs on the Hub servers. the sent items update is successfully updating clients. below is the screenshot of an event for one email message which is successfully updated from exclaimer but it did not update on the client outlook while
using cached mode.
Since the issue is with multiple users, I am searching for a centralized solution
Mashhour Faraj

Dear Mashhour
Here you go
Employees can see their email signatures and disclaimers
With Exchange 2013, a Microsoft Outlook user can’t see any added email signatures or disclaimers as they are added to an email when it passes through the Exchange server.
Signature Manager Exchange Edition lets email users see their email signature and corporate disclaimer within the Sent Items of their inbox, giving them visual confirmation of the processed email
Source -
http://blog.exclaimer.com/exclaimer-signature-manager-vs-microsoft-exchange-2013/
Updating to the latest version of signature manager exchange edition will help you to resolve this problem for sure
Or you need to contact them to find a solution on this .
I'm pretty much sure that this problem is related with some version mismatch on their s/w on exchange 2013 which is causing this issue.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

How to enable push mail for gmail in iphone 6 plus

how to enable push mail for gmail in iphone 6 plus

Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

How to enable cascade view for sites(iStore) in 11i?

How to enable cascade view for sites in 11i?

Hi,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
for TechNet Subscriber Support, contact [email protected]
Wendy Li
TechNet Community Support

How to create database item for fast formula?

Hi,
Is there any document for how to create database item for fast formula? I could not find in Metalink or this forum. Thanks.
Andy

Oracle ship many pre-delivered Database Items plus they're created automatically when you create Input Values (etc).
There's often something already there for you. If there's not, you usually create Fast Formula functions to retrieve other data. You don't create your own custom DBIs; Oracle don't deliver APIs for that.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

How can I recover my Emails and Sent Items for an Accountthat was wiped from my computer?

I had to complete a system restore as my computer failed. This resulted in my account being wiped from the computer, alomg with any files relating to it. I have consequently downloaded Thurderbird again and reinputted my details, whih has resulted in me gaining emails for the past month. However I have not got access to the emails I received for the 6mths prior to that time, any of my sent items, or any of the sub-folders I created and their contents. If anyone has any offerings of help in recovering these I would massively appreciate it!
Thank you,
Ian

what mail provider? can you still access your mail in their web mail? Do you have backups?

How to insert more items for each tab in WAD 7.0

Hello to everyone,
My problem is confined to the WAD 7.0
I would like to insert 4 different queries into a new Web Template.
Two of them have to stay in one page and the others in one page each; therefore, the result would be a Web Template with three tabs.
Unfortunately the system creates automatically four different tabs with one query each.
Anybody knows how to insert more items in one page/tab?
Thank you very much
Savino Pompa

Hi Savino
In the WAD bring up the properites of the tabstrip_container web item, under the Internal Display group in the Tab Panel List, create 3 tabs, then drag 3 contatiner_layout web items into the tab web item.
In each conatiner item drag the analysis web item, 2 in the first container, then 1 each for the others, then point each analysis web item at a dataprovider(query).
Setup the contatiners so that the analysis items displays, to do this in the container properties create a row then on the following screen a column and then set the Subordinate web item to the analysis item, these web items control layout and are useful for dealing with multiple web items, for the first tab with 2 queries you will need to play with the layout, either 1 row 2 column or 2 row 1 column.
For each tab you created add the corresponding contatiner as the Subordinate Web Item in the Tab Panel parameters for each tab.
Hope this helps
Josh

How to see sent items

Hi. My sent items aren't showing up in the sent file. They are being sent though. Can anyone help?
Thanks!

Did I need to do anything with the downloads to desktop?
No, you can trash them if everything is the same... we just moved them there for safety in case we needed to put them back for unknown reasons.
Are you using Filevault perchance?
Quit Mail, in the Finder negotiate to this Folder...
/Users/YourUserName/Library/Mail/
find the Sent folder/box in that/your account, highlight it an do a Get Info on it, report the 3 Privileges.

How to enable digital signature for browser enabled infopath form?

Dear all,
I have designed infopath form and published it into the document library. I want to provide signature option on the browser enabled infopath form.
I have created it using secion and digital signature control.
but I am getting this message.
When i click on Yes . I get following screen.
And it just hang here. I have enabled the active x control feature for IE.
Please tell me where i should install this component and how it can be done?
I have access only to the sharepoint site.
Thanks

Hi,
According to your post, my understanding is that you want to enable digital signature for browser enabled infopath form.
To be able to sign this form, you need to activate two Windows Internet Explorer add-ons. Click the Information Bar in the dialog box, and then click Run ActiveX control to activate each add-on.
Then you need to active the following add-on.
In my environment, after I click the Next button, it open the picture as below.
Once I click the link to add the add-on as above, everthing works well.
For more information, you can refer to:
Add a digital signature to a browser-enabled form
Digital Signatures in InfoPath 2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to trigger approval request for resources after assigning role

Hi,
We have a use case where we need to assign resources to user via assigning roles.
In order to achive this use case
1. we have created a role and assigned the access policy to it which contain the resources to be provisioned once the role is assigned to the user.
2. Created a SOA composite having manager approval and assigned this composite to a approval policy of type 'Assign Role'.
3. I am already having the approval policy for the resources which are present in roles. The approval policy of resources is of type "Provision Resource".
4. Also the SOA composite for resource apporal is deployed in OIM and assigned to the approval policy.
5. Now when I am raising the request from OIM of type "Assign Role" the approval defined in the SOA composite for Role approval gets triggered. After approving the role request the role is assigned to the user and also the resources defined in the access policy gets provisioned to teh user account.
Now I want to trigger the resource approval process after the role approval instead of directly provisioning the resources. So that once the role is approved the individual Approval Process of resources part of roles should also gets invoked. Based on the approval or rejection of resources approval, the resource gets assigned to the user.
Please let me know how to achieve the above use case.
Thanks in advance

Access policy is saying whoever gets xyz role, will get this abc resource. Now once a user gets xyz role, you are stopping to get abc resource? both are contradictory. Don't go through access policy. User is anyway going to request for roles. Modify your flow and make user request for resource. Have your composite and approval policy attached. User will get resource once it is approved.
regards,
GP

How to enable Audit option for "Evaluation Context"

Hi Everyone,
I am looking for audit option to enable - EVALUATION CONTEXT
for below statements. I am in Oracle 9.2.0.4
ALTER ANY EVALUATION CONTEXT
CREATE EVALUATION CONTEXT
CREATE ANY EVALUATION CONTEXT
DROP ANY EVALUATION CONTEXT
EXECUTE ANY EVALUATION CONTEXT
But it is showing up error mesg.
SQL> audit on EVALUATION CONTEXT by access;
audit on EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
SQL>audit EVALUATION CONTEXT by access;
audit EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
SQL> audit create EVALUATION CONTEXT by access;
audit create EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00969: missing ON keyword
SQL> audit on create EVALUATION CONTEXT by access;
audit on create EVALUATION CONTEXT by access
ERROR at line 1:
ORA-00956: missing or invalid auditing option
Thanks in advance.
R Ram
Edited by: user11985525 on Apr 14, 2010 1:42 PM

Hi Ghanny,
Afaik, there is no auditing capability in OIF for the SAML 2.0 part. And even the "Enable Auditing" parameter for SAML 1.x that you mentioned would only record the assertions created and not the actual resource accessed. If you have a web security product stack (such as OAM) at the SP, that would typically have auditing capabilities.
-Vinod

How to enable sent item for resource maillbox.

Similar Messages

Maybe you are looking for