How to Enable sleep/standby (windows 7) T61

How to enable sleep/standby mode on a windows 7 32bit lenovo t61 -  7665?
Background info:
I just formatted my Lenovo t61 - 7665 because I had alot of problems with hibernation and sleep mode.Now I really don't want to update if I dont have to but I need to update something to make sleep mode work?
Does anyoe know what driver or software to install to make sleep standby mode work. Hibernation works great
Thanks

Just look into that thread
It might help you.
My home-forum: http://www.thinkpad-forum.de
Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
My ThinkPad-Collection

Similar Messages

  • How to enable hibernation in Windows Server 2008 R2

    Hi 
    I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
    but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
    Also checked with powercfg /energy & getting given below errors.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
    The hardware in this computer does not support the S3 sleep state.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
    The hardware in this computer does not support the S4 (Hibernate) state.
    Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
    PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
    with the hardware in this computer.
    Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
    Thanks.

    Hello,
    I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • NB200 - How to enable WiFi on Windows 7?

    Hey,
    I've just bought a brand new Toshiba NB200 netbook (10-Z).
    When finished with the needed Win XP install, I installed the Windows 7 RC1, but the wifi is not working. The Fn+F8 Combination would start the wifi adapter, but the led in the outer side of the netbook is not blinking or anything, and system says, first I have to turn on the wifi, but I simply Can't, because the combination isn't working. I installed all the drivers, but still don't work.
    Sorry for the bad english, i'm Hungarian.
    Thanks, B3N1

    I installed seven directly, without even booting on the windows xp config shipped with the laptop
    the wireless was off, there was no way to enable it, even after following all the advises before.
    I had to reinstall XP on a second partition from the restore disc, and then the wireless was enabled, either on windows xp or seven... (but you could do the same thing from a standard xp install, you'll just have to install all the drivers)
    Altough I cannot switch the wireless off with the fn+f8 combo (or i can go to the xp partition, switch it off, and go back to seven... lol)
    I know seven was not officially supported and blah blah blah but it was really REALLY annoying, it was the first (and I hope the last) disappointment with the nb200. (PLL20C-00200C, canadian model)

  • How to enable hibernate in windows 7 x86

    Hi
    hibernate feature is not enabled on my system.
    "hibernat after" and "Allow Hybrid Sleep" does not exist in the below directory:
    Power Options>Sleep
    I when typed "powercfg /hibernate on" OR "powercfg -h on" in administrator CMD, Show below message:
    Hibernation failed with the following error: The request is not supported.
    The following items are preventing hibernation on this system.
    An internal system component has disabled hibernation.
    I when typed "Shutdown /h" OR "Shutdown -h" in administrator CMD, Show below message:
    Hibernation is not enabled on this system. You must enable hibernation in order
    to use the -h option.
    hiberfil.sys file does not exist in root windows drive.
    Please Help me
    Thanks

    Hi,
    you cannot use hibernation if booting from VHD also you will need hardware that support the required standards (modern hardware does) and have up-to-date drivers
    you could force hibernation to on by setting key HKEY_LOCAL_MACHINE\SYSTEM\CurrentCongtrolSet\Control\Power\HibernateEnabled to 1
    MCP/MCSA/MCTS/MCITP

  • How To Enable AHCI For Windows 7?

    I'm trying to get my Samsung 840 Evo SSD to enable AHCI, but have been reading and it appears to be more difficult than a few simple changes. I have an Early 2011 15" Macbook Pro. How do I get AHCI enabled for Windows 7?
    Thank you in advance.

    Thank you for the link. I'm still not sure what needs to be done. I made the changes in 'regedit' like the forum stated, but am still having issues. I will post screenshots below that are showing up. More assistance would be greatly appreciated.

  • How to enable javascript in windows server 2008 R2 enterprise ?

    Hi all,
    Hope doing well,
    sir i am using windows server 2008 R2 enterprise operating system.
    i am running my web application in localhost. it's working fine.
    but i have used timer using javascript and some javascript function that is not working in this application.
    i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
    i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
    enabled javascript and my application is not working.
    plz help me. it's urgent
    waiting for reply.
    thanks in advance.
    vicky Bangalore

    Hi Vicky,
    Please make sure that the Javascript is enabled on you IE.
    To do this, please go to Control Panel->Internet
    Options, click on security tab,
    click on customer level button. Please scroll
    down to Scripting, underScripting
    of Java applets, click enable.
    OR
    Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • How to enable flash in windows 8

    Adobe website says Firefox is installed. Works under Internet Explorer. But Firefox Options Plugins does not show either Flash or Shock. Trying an install bombs out with an error that it can't find entry point in a Windows system file. How do I get Firefox to see that Flash is already in Windows 8?

    Adobe has different installers for IE and Firefox, because IE takes an ActiveX control and Firefox takes a plugin. You might need the second installer if you have never run it before.
    http://get.adobe.com/flashplayer/
    Visit using Firefox and make sure to uncheck any unwanted extras.
    After the installer downloads, you will need to run it. If that's where the problem is, you can try the "offline" installer that doesn't need to connect back to Adobe for more files and see whether that works better:
    https://www.adobe.com/products/flashplayer/distribution3.html
    Choose one of the downloads for "Plugin-based browsers".
    Any luck?

  • How To Enable NAT in Windows 2003 Server to wireless connection mobile or computer

    Situation: I am an administrator of company . I’m getting my internet services through a
    DSL connection. I’m using Microsoft technologies; hence, my server is Windows 2003 Server. I want to distribute internet(wireless) to all the computers or mobiles through the main server by routing and remote access
    Main server is 192.168.1.10
    Default gateway(ip of router linksys) is 192.168.1.1
    How can i do that and which setting i will use
    please help me

    Hi,
    So you don’t have a NAT device and want to use windows server 2003 RAS role as a NAT?
    Windows server 2003 could work as NAT.
    How to configure Network Address Translation in Windows Server 2003
    http://support.microsoft.com/kb/816581
    But I’m a bit curious with your gateway. I guess windows server 2003 connect to internet via your default gateway. If so ICS is another solution:
    How To Set Up Internet Connection Sharing in Windows Server 2003
    http://support.microsoft.com/kb/324286
    At last, buy a wireless router could be a better solution.
    Hope this helps.

  • HOW TO ENABLE EXTENDED STANDBY MODE

    I am unable to locate "Extended Satndby Mode" in Power management. Can anybody Help ? I am attaching a screenshot
    Solved!
    Go to Solution.

    Assuming that you are using Xperia Z1, it has Stamina Mode which is accessible from Power management. Stamina Mode is way more efficient. Following link can be useful >>Z1 Stamina Mode

  • Found: Intel Turbo Memory causing T61 wake-up from sleep / standby problems

    This is related to my earlier post, but I've found a new cause and thought to post a new message to make it easier for others to find it if they are running into similar problems.
    My system
    T61 model 7662-CTO (built July 2007)
    Vista Business w/ SP1 
    Nvidia Quadro NVS 140M (driver version:  7.15.11.7597)
    Intel Turbo Memory (driver version: 1.7.0.1029)
    Intel Wireless card 4965AGN (driver version: 11.5.0.36)
    Thinkpad BIOS (version 7LETC4WW,  2.24)
    no card reader or integrated webcam
    I was having problems with Vista failing to wake-up after being put into sleep (or standby) mode. Instead of returning to the desktop, the system immediately crashes and reboots. After many hours, I reformatted the drive and re-installed Vista (business edition). Before running the Lenovo system update, I installed Vista Service Pack 1, then I ran Windows Update and installed any remaining update hotfixes. (I never delayed restarting the machine when prompted)
    I incrementally began installing Lenovo drivers, and after the Power Management driver determined that hibernate was working.
    The 'sleep' option was unavailable until I installed the Nvidia Quadro NVS 140M drivers. Then sleep worked!
    Note: Intel Turbo Memory driver was uninstalled at this time.
    After all other lenovo programs were installed, I installed the driver for the Intel Turbo Memory. I put the computer to sleep, and it crashed/rebooted upon being woken up.
    I uninstalled the Turbo Memory driver from the Device Manager, and normal sleep -> wakeup function resumed.
    Because the sleep / standby feature requires the Nvidia Quadro drivers, and the Vista OS and the Intel Turbo Memory must properly work together for the turbo memory to work, I imagine the failure involves some driver mismatch between these three. I cannot recall now whether this issue was present when I first received the machine over a year ago (pre-installed Vista Ultimate, service pack 1 not even out yet). Perhaps Vista SP1 made some change that the Turbo Memory driver doesn't like, particularly with the Nvidia Quadro drivers in the mix too.
    Just FYI for anyone interested or curious.

    Remove the two aftermarket memory modules and observe the results.

  • How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    How do I prevent the Window Office applications from launching when my iMAC boots or recovers from sleep? I've tried System Preferences however the Office programs are not listed?

    lunagirl wrote:
    The first 3 apps listed are not installed because I have not run the activation assistant for the Office trial that came with the T61.  Add/Remove programs has only these pre-installed apps:
    Microsoft Office 2003 Web Components
    Microsoft Office 2007 Primary Interop Assemblies
    Microsoft Office Small Business Connectivity Components
    MS SQL Server 2005
    MS SQL Server Native Client
    MS SQL Server Setup Support Files
    MS SQL Server VSS Writer
    Is the activation assistant one of them?
    No, AFAIK should be listed as Microsoft Office Suite Activation Assistant
    Rgds,
    Ahti

  • How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

         I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
    In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
    In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
    Your help is very much appreciated.
    Thanks in advance.

    control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
    if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

  • How do I enable cookies on Windows 7

    Some sites do hold my password for access ( e.g. credit card) when I went to ' help'. the suggestion for firefox was to go to firefox then 'tools', etc. When I explored firefox and open the different windows I was not able to find tools. Further investigation I found similar instructions but it stated it was for Windows XP. So how can I enable cookies on Windows 7?

    Hi Esther.Applegate,
    Do you have the ''Firefox'' menu in the upper left hand side of the screen? If you do, hit ''Alt'' to temporarily enable the ''Menu bar''. Then go to ''Tools > Options > Privacy''. The article [[Enabling and disabling cookies]] will show you how to set an exception for that site.
    If you want the ''Menu bar'' on at all times, go to ''Firefox > Options'' and enable ''Menu bar''.
    Hopefully this helps!

  • How to enable trackpad tap to click windows 7 64 bit macbookpro mid 2009

    how to enable trackpad tap to click windows 7 64 bit macbookpro mid 2009:
    The following link has a solution for 32 bit but not 64 bit, is there a new update that works for 64 bit??
    https://discussions.apple.com/thread/2308135?threadID=2308135

    Hi Rhondavas77,
    To enable/disable Just-In-Time debugging
    On the Tools menu, click Options.
    In the Options dialog box, select the Debugging folder.
    In the Debugging folder, select the Just-In-Time page.
    In the Enable Just-In-Time debugging of these types of code box, select or clear the relevant program types:
    Managed, Native, or Script.
    To disable Just-In-Time debugging, once it has been enabled, you must be running with Administrator privileges. Enabling Just-In-Time debugging sets a registry key, and Administrator privileges are required to change that key.
    Click OK.
    More information is here.
    http://msdn.microsoft.com/en-us/library/k8kf6y2a(v=vs.85).aspx
    Best Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to enable single window mode?

    *how to enable single window mode in the latest version of Safari?*
    browser opens up some links in new windows and it is very inconvenient
    Message was edited by: wolfxr

    All that you describe is the standard setting them I have long found, but they do not bring any results. What is interesting - parameter "TargetedClicksCreateTabs" in a state of "true" which is processed in the Mac version, broken in the Windows-based version if it is to register the file C: \ Program Files \ Safari \ Safari.resources \ Defaults.plist a file stored in the folder C: \ Documents and Settings \ Admin \ Application Data \ Apple Computer \ Preferences \ com.apple.Safari.plist scrambled to change it theoretically impossible, but if you replace it with THIS file, then it can be set, but the parameter "TargetedClicksCreateTabs" still not working

Maybe you are looking for