How to enable SSID broadcast? (E4200 Cloud f/w)

I got E4200 v.2 with the latest cloud firmware. On the previous (non-cloud) firmware there was an option to enable or disable SSID broadcast, and I disable it. Now I want to enable it back, but can not find this option in Cisco Connect Cloud.
So there is a question: how to enable SSID broadcast on the E4200 v.2 with Cisco Connect Cloud firmware?
wbr, bg

In your case, you need to reset the router to factory defaults, at which point the SSID will be set to broadcast and it cannot be disabled. To know more about why there is no option to disable the SSID broadcast anymore on the Cloud firmware, click here.

Similar Messages

  • How to enable Cell Broadcast message in Iphone5

    Hello!!
    I work at True Corp. in Thailand. I would like to use Cell Broadcast System by using Iphone5 for receving Cell Broadcast message from Radio Site. I cannot find Cell Broadcast setting in Iphone5, I am not sure I have to new software from Apple or not?
    How to enable Cell Broadcast function in Iphone5?
    Note: Reference from this Website  https://smscellbroadcast.wordpress.com/tag/iphone/
    Thank you

    In your case, you need to reset the router to factory defaults, at which point the SSID will be set to broadcast and it cannot be disabled. To know more about why there is no option to disable the SSID broadcast anymore on the Cloud firmware, click here.

  • How to stop SSID broadcasting

    Where do I find the option to stop SSID broadcasting in my Actiontec MI424WR Rev. F Router?
    The user guide is located here:
    http://onlinehelp.verizon.net/consumer/bin/pdf/ActiontecMI1424WRUserManual.pdf
    and it shows where that option is but the screens in the manual do not match the screens you see when you login into the router (not even close). I looked through every screen while logged into the router and I could not find it. I would expect it to be a check box to turn broadcasting on or off in the same screen that you assign the SSID name but the option is not there.
    In addition, where can I find a link to download the user guide that matches this router?
    I wanted to email Verizon tech support to ask them this but they do not accept email questions concerning Wireless issues. They should accept email questions about any issues concerning their equipment. I tried thrie chat support a few times but it keeps saying it is unavailable even during the listed hours of operation.
    Thanks to anyone who can help me out.
    Solved!
    Go to Solution.

    The following FAQ will help you
    http://www.dslreports.com/faq/11468
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How to enable information broadcaster in portal

    In DEV portal system, I can access information broadcaster content. But in QA, though the same content are there ( ivew, page, role) under "content provided by SAP", I was not able to run it. Can anyone advise what is missing here? I have super admin privilege on portal and admin role in BI system.
    Thanks,
    Sharon

    Hi Ehud,
    I am getting below error, a common error which I get a lot when it couldn't find the web page during browering:
    Internet Explorer cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
       What you can try:
         Diagnose Connection Problems 
         More information
    Just so you know, our portal and bi server are hosted at our hardward outsource vendor site. How can I check if there is any domain barrier between portal and BI portal?
    Sharon

  • How to enable directed broadcast in an RVS4000

    I have two plant automation networks lets say A/24 and B/24 without comm between them, and as per the menufacturers of the atutomation controllers, the routers between them have to be able to direct broadcast.
    How to do it with a RVS4000?

    i know that for specifying attachment u should set it in header like this
    res.setContentType("application/pdf");
         res.setHeader("Content-Disposition","attachment;filename=7444.pdf;");
    creating DSN on server from another pc i think that can be done only by using PC anywhere which should be installed on both server and client with this u may control the server from your local machine

  • Config enable ssid broadcast, requre wep

    What is this config missing to require the client know the WEP key to get on the network? Someone said they could get on my network, are they lying?
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption key 1 size 40bit 7 6C770C504D00 transmit-key
    encryption mode ciphers wep40
    ssid NEFLIN
    authentication open
    authentication shared
    guest-mode

    Hi there,
    Something like:
    encryption key 1 size 128bit xyz transmit-key
    encryption mode wep mandatory
    config under dot11 interface would force the MU's to encrypt/decrypt the traffic once associated.
    Also, I would not use Authentication Shared
    So, I would use:
    encryption key 1 size 128bit 7 4D2768045E671201053A021223D5 transmit-key
    encryption mode wep mandatory
    ssid NEFLIN
    authentication open
    Cheers,
    ME

  • How to enable diagnostics in cloud services and virtual machine

    Hi All,
    I need to enable diagnostics  for cloud services and virtual machine in our
    cloud environment. I referred the below link.
    https://convective.wordpress.com/2014/06/27/using-azure-monitoring-services-api-with-azure-cloud-services/
    Installed azure SDK 2.5 and cloud services instance is not displayed for cloud services in Visual studio 2013. Please provide the steps to enable at run time. 
    1) How to enable this diagnostics at run time.
    2) How to enable event logs for cloud and Virtual machine
    3) How to get the event log data's from REST API.
    Please help to resolve this.
    Thanks.
    Regards,
    Rathidevi

    hi Rathidevi,
    In addition, you could enable diagnostics feature on VM from this blog:
    http://azure.microsoft.com/blog/2014/09/02/windows-azure-virtual-machine-monitoring-with-wad-extension/
    Please refer to it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • MacBook Pro and SSID Broadcast

    Hi All,
    New MacBook Pro and I am having some strange issues. By default I disable SSID Broadcast on my Netgear, and all of the other wireless devices work fine. Including my 15inch Powerbook. They only way I can connect with the MacBook Pro is to enable SSID Broadcast. Both of the laptops are setup with the same Airport configs.
    Software update is up to date, so I'm kind of stumped. Anyone have any thoughts?
    Thanks,
    Dan R

    Try changing the Airport network selection from Automatic to Preferred networks in the Networks System Preference and additionally make sure the network you're trying to join is at the top of the list. If it isn'tdrag it there. Failing that, try deleting the network profile, apply the change and then readd the network manually and see if that helps.

  • WRT54G V7 and SSID broadcast disable

    have problems connect to the router when ssid broadcast is diablet. I can see the "network", enter the SSID and wep-key, but it will not connect.. If I select to broadcast my SSID I can easily connect to the router.. Strange, anyone who have the same problem ? I also have a wrt54g v1, and this router do not have these problems..With this you can easily connect to the router when ssid broacast is disablet..

    I've used Intel PRO 2200GB ver 9.x and earlier version of 10 (driver + management software) to connect to a hidden SSID wireless network without any problem. I manually created a profile for the hidden network and connect to that profile.
    On an unrelated note, I've enable SSID broadcast after reading a few articles about it being nothing but trouble. Here's one.
    Message Edited by neo27 on 01-23-200709:24 AM

  • E4200 SSID Broadcast

    E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.

    It is not your E4200 that doesn't let the device connect. It's the device which has problems with the disabled SSID broadcast.
    Don't turn off the SSID broadcast. It only creates problems and has absolutely no benefits.

  • How can I disable SSID broadcast with Time Capsule?

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    Thanks.

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    You can by turning on hidden network.
    Open the airport utility .. click on your TC, and then edit.. go to the wireless TAB. Click on wireless options. Click Create hidden network.
    Let me add in modern world.. it is totally useless. A person can see your hidden network using any standard wireless analysis software. It adds no security at all.. and WPA2 Personal with a decent password 10-20 characters mix of upper and lower case plus numbers is still solid.. add more characters if you are paranoid.. but honestly hiding SSID does nothing.
    http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssi d-really-more-secure/
    If you did not know it is not part of the IEEE wireless standard.. it therefore often leads to problems with clients.
    There are many other reasons given in the article above..

  • How to enable social tags options on lists and ability to show the tags in Tag cloud?

    Hi,
         How to enable Social Tags on discussion list? currently this option is only visible in libraries. My requirement is to see all the items tagged with particular tag in my newsfeed using Tagcloud web part.  Thanks
    Br,
    Alam

    Hi,
       I am using sharepoint 2013, the option is not available in the list settings under the managed meta data settings. Yes, in list item the Tags&Notes option is available but that doesn't appear in the Tag cloud webpart which means list items
    are not associated with social tags. I want ability to search for all items with particular tags using Tag cloud webpart.
    Regards,
    Alamzeb Nasar

  • Disable SSID broadcast solve the E4200 continuous flashing problem

    I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. 
    After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.
    Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect.  
    Now the LED light is continuously lit.
    I hope this hint could help you to solve the poblem as well.

    I wonder if the 'flasjhing logo' problem (which indicates WPS connection is in process) could be due to using Cisco Connect initially.
    I am thinking of doing a '30-30-30' rest, using the web browser for all the configuration.(I have been doing this ever since ditching Cisco Connect early on).

  • How to confirm access secure with SSID broadcast disabled?

    I have set up my wireless router with a unique SSID, SSID broadcast disabled, and with WPA enabled. With my PC turned off, the 'WLAN' light remains lit. Is this a 'feature' of the WRT54G wireless router, or is someone else actually using my wireless router?

    the WLAN light will be lit as long as you have the wireless function on the router "enabled" . You may have disable the SSID broadcast....however that does not stop the wireless function on the router.

  • Cell Broadcast reception on iPhone - is it possible ? How to enable it ?

    Hello, all.
    I'm working in a company that develops software for mobile operators, such as SMSC, USSDC, Customer care, Billing, etc...
    One of our products is Cell Broadcast center.
    Our clients use Cell Broadcast to give different services to their subscribers, such as location based discounts. For example, in some areas with low traffic a cell broadcast message is broadcasted - "Discount 20%". The subscribers see such messages on their phone and prefer to call from "cheaper" areas.
    The problem is that these messages are not displayed on iPhone.
    I've checked through all menues on iPhone and iPhone 3G, and couldn't find anything like "Cell Info Display" \ "Cell Broadcast" (like on Nokia phones), "Channels" (like on windows mobile Samsung), "Info services" (like on Motorola) or anything like this.
    At the same time I know that iPhone is able to receive Cell Broadcast messages, since it's able to receive data on sim-card related cell broadcast channels (such as 1000h) and pass it to sim-card.
    So my question is - can Iphone be configured to receive ordinary text Cell Broadcast messages (on channels 0-999) and show them on the title screen or in Messages (Mail) menu ???
    Maybe there is some "secret code" to enable cell broadcast (like the one used to change SMSC address on iPhone) ???
    Best regards,
    Yury

    I second that! It was a very useful function on my Nokia back then. Now I'm a proud owner of the iPhone 3G and it'd be really great having an opportunity of recieving broadcast messages on Apple's cell-phone as well.

Maybe you are looking for