How to enable SSL in iChat 3.1.9

Can anyone please tell me how to enable SSL in iChat 3.1.9 for Tiger? I am having the error "Cannot connect to AIM." I was having on my Leopard macbook, but I enabled SSL and it works now. However, I can't see where to enable SSL in my iMac? Thanks ahead of time for any help!

Ok, upon doing research, I hav found out that there is no SSL to enable until ichat 4.

Similar Messages

How to enable SSL in oracle 11i

HI
1)How to enable SSL in oracle 11i
2)How do I make an oralce 11i instance available on the internet
can some one suggest the procedure and the metalink doc or forums that can be referred to for better understanding and using the applcaitons
Regrads

Refer to the following notes:
Note: 123718.1 - 11i: A Guide to Understanding and Implementing SSL for Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=123718.1
Note: 217368.1 - Advanced Configurations and Topologies for Enterprise Deployments of E-Business Suite 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217368.1
Note: 229335.1 - Best Practices For Securing Oracle E-Business Suite 11i For Internet Access
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=229335.1

How to enable SSL for policy service?

Hi all,
My application is using SunONE's C API to communicate with the Identity Server.
In order to enable SSL, I have changed the following lines in amconfig.properties:
com.sun.am.namingURL = https://id01.core.development.net:443/amserver/namingservice
com.sun.am.policy.am.loginURL = https://id01.core.development.net:443/amserver/UI/Login
com.sun.am.policy.am.library.loginURL = https://id01.core.development.net:443/amserver/UI/Login
After operating these changes, everything continued to work fine...but then, I checked with a network sniffer what data is being sent to IS:
- The login and naming data were over SSL
- Policy and session items were plain HTTP
My questions are:
1. How to enable SSL for policy evaluation requests?
2. How to enable SSL for sessionservice requests?
3. What are the changes required on the server/client?
Many thanks,
Dan

There might a better different forum for this question.

How to enable SSL in order to access web appln. deployed in CE using https?

Hi,
I am new to Netweaver and this forum. Not sure if I am posting my question in right forum category. Please let me know otherwise.
Question -
I would like to know how to enable SSL in order to access the deployed web application in Netweaver environment using https instead of http.
System Info:
Netweaver 7.1
Database: SAP DB (KERNEL 7.7.04 BUILD 021-123-186-883)
OS: Linux (amd64) 2.6.18-194.el5
Note: I have general idea about how to enable SSL in a non-SAP application server like tomcat using valid certificate (like enabling SSL in tomcat and adding certificate to server & Java keystore). But since I am new to Netweaver, not sure how to enable the same in Netweaver environment.
Any help would be much appreciated.
Thanks
Edited by: Gopi.j on Oct 15, 2010 8:04 PM

hi
check the following sap help.
http://help.sap.com/saphelp_nwce71core/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Best regards,
John

How to enable SSL optimization only for a single remote WAE and specific website?

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

Hi guys.
I have to enable SSL optimization for a specifc HTTPS website only and for a specific remote site only (branch office).
The scenario is as follows:
Multiple sites connected via a MPLS cloud. Each site has its own WAE device (module or appliance).
There is a central manager and core WAE in the main site (central site).
There is a website accessed via HTTPS by all the remote sites. This specific website is hosted within the main site.
For only a specific branch office (remote site) we want to enable SSL optimization for this specific website.
I saw this great and useful doc, but I still have some concerns.
https://supportforums.cisco.com/docs/DOC-16452
Basically, according to I see, I should do the following if I want to enable SSL optimization with the entire environment:
- export the certificate and keys;
- enable secure store in the central manager;
- In the remote and core WAE, Check "initialize CMS secure store" and "Open CMS Secure Store";
- In the core WAE, import the CA certificate (upload PEM file);
- In the core WAE, create the SSL Accelerated Service by:
    --importing the client certificate and the key;
    -- Match interesting traffic;
    -- Put the SSL Acc Service in service;
- Finally, make sure SSL acceleration is enabled in both remote and core WAE.
The concerns:
I only need to enable SSL optimization for a specific location accessing a specific website.
Should the steps above work fine If I enable the SSL service for this specific website in the core WAE and enabling secure store only in a single remote site (brach office)?
how will the other remote locations behave?
Will they access the website normally with no SSL optimization even passing thru the core WAE?
What about the other SSL sites which have no certificate? They will be treated as normal HTTPS with no optimization, right?
If the site uses proxy, will any flow be impacted?
If the steps above do not fit my case, how can I configure SSL optimization for only one remote WAE?
Thanks in advance.
importing the client certificate and key (client.crt and client.key exported from the Web server - See more at: https://supportforums.cisco.com/docs/DOC-16452#sthash.3BKz05zU.dpu

How to enable ssl in ohs

I installed the web tier (ohs and web cache) 11.1.1.2 on 2008 r2 64 bits. Also I patched that to 11.1.1.3 I did not think and this may
be where I went wrong, I needed to install weblogic?. I have not done anything with webcache. yet.
I had imagined I could enable ssl in apache the way it is done on other installations just by putting entries in
the ssl.conf like SSLCertificateFile and SSLCertificateKeyFile . But no. The software will not allow you to do that.
I believe the certificate has to go in a wallet (for ohs. Other fusion things want a different plan). There's multiple
wallet programs already there such as from installing the database. I find that the wallet program will not allow
me to use the csr I already created that was used to get the certificate I have gotten. oops!
So anyone know if there is a way around this so I can use the .crt and .key I have for this domain name?
This is really taking a lot of time. I suppose I could install apache, the regular one, on this machine so that I
could use an ssl connection to that and then hand it over to ohs. Since it wasn't going anywhere it wouldn't
be much of a problem the traffic wasn't encrypted.
Edited by: lake on Nov 23, 2010 7:11 PM

I thought I'd never get this to work. No one should bother trying without reading the docs
1226484.1 and 1218603.1 on metalink.
While it could be that one could use a reverse proxy such as using proxypass and proxypass reverse
in an apache web server so that ssl could be configured in the other server, I saw reports of that not always working.
Otherwise if one did not install weblogic I believe the only way to configure ssl with this version of ohs is with orapki the command line
interface for handling wallets, or the gui wallet application which I found on the 11gr2 database menu under "integrated management tools". You may be able to add an existing csr to a wallet via the orapki interface.
If you were using a separate key and certificate you may be able to change them to the wallet requirements given sufficient knowledge of opensll. That was more knowledge than I had. So what I did
was start over from scratch totally. I created the csr in the wallet gui, exported it, submitted it, and got a totally new cert from our cert source.
What I used for the wallet "operations, import user certificate" was a .cer file, and it worked. The wallet already had our CA in it so I did not have to fight that battle. Hallelujah.
It is essential to check on the "Wallet" menu the "Auto Login" selection before saving it. When you save a wallet
it will be called cwallet.sso if it is autologin. If the saved file is called ewallet.p12 it is not autologin and will not
work for ohs.
After you have saved your wallet as cwallet.sso say in
"....instances\instance1\config\OHS\ohs1\mykeys"
then you would need to check the ssl.conf and it would need to be like so:
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/mykeys"
Note that is to the directory the sso file is in.
But wait there's more....
on windows 2008 r2, you need to get fire up windows explorer and navigate to your cwallet.sso file
Under properties, security you need to add SYSTEM in "group or user names" and give it all permissions possible.
Secondly, you need to go under properties, security, advanced, owner and change the owner to SYSTEM.
Without these changes it will never work because the web server cannot open the wallet.
Remember by default the logs go in
"....instances\instance1\diagnostics\logs\OHS\ohs1"
I became very familiar with them :-)

In EM Cloud control 12c, How to enable SSL between agent and OMS?

As title. Thanks!

Did you checkout MOS note 12c Cloud Control Security: How to Secure a 12c Agent from Console / Command Line? [ID 1390222.1] ?
Regards
Rob
http://oemgc.wordpress.com

Enabling SSL for Oracle Enterprise Manager 10.1.3.1 is Failing!!!

Hi All,
I have followed the steps described in
http://download-uk.oracle.com/docs/cd/B31017_01//core.1013/b28940/em_app.htm#BABCEEAH.
However when I am trying to start the application server using 'opmnctl startall' the server is not starting and some timeout is getting generated in the log file.
Is it that enabling SSL will only make the EM console secured? Then how to enable SSL for other soa components like - BPEL,ESB,OWSM? Are there any documentations available?
Also please let me know how can I enable SSL for Oracle Application server console?
Please any advice will be appreciated. I am in the middle of a project delivery.
Thanks

Hi,
Let me first highlight the installation that I have done. I have installed SOA components with 'basic installation' mode.
The log file under <ORACLE_SOA_HOME>/opmn/config/ has generated the following stack:-
08/07/25 11:03:34 Start process
08/07/25 11:03:37 WARNING: XMLApplicationServerConfig.overwriteSiteConfigPort Port assignment is ignored: web-site not found in the server OC4JServiceInfo id: default-web-site protocol: http hostname: null port: 8890 description: null
08/07/25 11:03:37 WARNING: XMLApplicationServerConfig.overwriteSiteConfigPort Port assignment is ignored: web-site not found in the server OC4JServiceInfo id: secure-web-site protocol: https hostname: null port: 1156 description: null
08/07/25 11:03:47 log4j:WARN No appenders could be found for logger (wsif).
08/07/25 11:03:47 log4j:WARN Please initialize the log4j system properly.
08/07/25 11:03:53 WARNING: OC4J Service: ascontrol-web-site with protocol: https and port: 1156 was not declared in opmn.xml
08/07/25 11:03:53 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
08/07/25 11:03:53 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: default-web-site protocol: http hostname: null port: 8890 description: null
08/07/25 11:03:53 default-web-site hostname was null
08/07/25 11:03:53 WARNING: OC4J will not send ONS ProcReadyPort messages to opmn for service: OC4JServiceInfo id: secure-web-site protocol: https hostname: null port: 1156 description: null
08/07/25 11:03:53 secure-web-site hostname was null
On the command prompt I am getting the following error:-
opmn id=CALTP8BB32:6203
0 of 1 processes started.
ias-instance id=home.CALTP8BB32.cts.com
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/home/default_group/
Error
--> Process (index=1,uid=301928631,pid=2944)
failed to start a managed process after the maximum retry limit
Log:
D:\product\SOASuite\opmn\logs\\default_group~home~default_group~1.log
--------------------------------------------------------------+---------
ias-component | process-type | pid | status
--------------------------------------------------------------+---------
OC4JGroup:default_group | OC4J:home | N/A | Down
ASG | ASG | N/A | Down
Please let me know where am I going wrong?
Thanks,
Mandrita.

Enable SSL for URL context

I'm unsuccessful in my attempts to find documentation that details how to enable SSL for URL (context) in Apache. I currently have https secured communication enabled between clients and the oracle http server, but i would like to also extend this security to individual app components like the OWSM control, gateway, policy manager, etc. Please help if you know how to setup SSL for URL in Apache.
Thanks in advance.

Pl see if this MOS Doc can help
How To Configure SSL For Discoverer 11g [ID 1359491.1]
HTH
Srini

Enable SSL for SQL used by ConfigMgr

Hello guys,
My DBA has decided to enable SSL encryption for an instance of SQL Server that is in use by our ConfigMgr.
some background setup: Windows 2008 R2, SQL Server 2008, ConfigMgr 2007 R2
My question is, how is enabling SSL for the SQL server will affect our ConfigMgr environment?
Is there's anything I should change in ConfigMgr in case the SSL was enforced e.g all communication should use https instead of http?
Sorry for being blunt here as we don't have this SSL on SQL setup before.
Please share your suggestion & thoughs, really appreciate it! Thank you.
---Pat

Just another reason not to use a shared SQL Server.
First, I would bring this up as an issue to management -- folks shouldn't just be able to change configuration on something that your system depends upon without it being approved by you. There are ramifications and costs associated with any change such
as this.
Next, as far as ConfigMgr goes, I've never ever seen a discussion on it so doubt that it is supported; however, ultimately, the actual SQL connection is just something used by ConfigMgr, not created or controlled by ConfigMgr. ConfigMgr uses a System DSN
based ODBC connection to connect to the DB on site system's with roles that directly connect to the DB. Thus, *in theory*, you could modify the connection string to use SSL.
If you can't convince management that what the DBA did was reckless and costly, then you should open an advisory case with Microsoft via CSS to discuss your options -- this will cost $$$.
Jason | http://blog.configmgrftw.com

How to do Post Install SAP Cryptographic in Netweaver CE 7.1 to enable SSL?

Dear all,
I have install sap netweaver CE7.1 and SSM 7.5.
During installation netweaver CE7.1, i didn't tick install SAP Crytographic Library, and after that NWCE setup, now i want to install Crytographic file that i have download.
here picture during setup nwce: http://i54.tinypic.com/jio0as.png
So how to Install SAP Cryptographic in Netweaver CE 7.1 to enable SSL, without again reinstall NWCE 7.1?
thank for any answers,

Chamnap,
Even though NetWeaver CE is a required piece for running Strategy Management, for a specific NetWeaver CE question you need to go to the NetWeaver experts, not SSM.
I suggest that you close this question on this Forum and repost it on the
NetWeaver Security Forum: Security
You might want to take a look through the other NetWeaver Forums - /community [original link is broken]
you can do a search to see if there are any postings that cover the same areas. I am just guessing that the Security Forum would be the best place. After reviewing the choices, you may see a better area.
Please don't repost this question on multiple Forums, as that is a violation of Forum rules.
And please close this question, as you can only have so many questions open at any one time.
Regards,
Bob

How do I enable SSL to serve swfs and non video content in FMS 4.5

I'm running FMS 4.5 with the built in Apache server on a Windows 2003 server running SP2. Our users are complaining that embedded videos in Chrome aren't displaying properly because the SWFs and some of the non video content are being delivered over http instead of https. I'm having trouble finding any documentation on how to add an SSL cert to the Apache server and enabling it to serve content over 443. I've requested my cert and am following my CA's docs on adding the cert to Apache, but I'm not seeing the VirtualDirectory referenced in the httpd.conf file. I'm relatively new to Apache configuration, so please include as much detail as possible in your answer. Thanks in advance for any assistance.

Look for httpd-hls-secure.conf file in AMS(FMS) Apache Bundle. httpd.conf includes this file. This enables SSL for key delivery for HLS. You may like to do the same for other cases.
Other than this, you have to enable the LoadModule mod_ssl in httpd.conf.

How do I ssl enable targets and EM in 10.1.2

How do I ssl enable targets and EM in 10.1.2 in
"Standalone console" (is this the correct forum?)
These are the steps I followed
1) emctl secure em
This enabled ssl for EM.
Problem is with monitoring a target - Oracle Reports
2) The I SSL Enabled reports. Added a port in webcache and gave default wallet directory. Following works
https://host:port/reports/rwservlet?getserverinfo
3) In sysman/emd/targets.xml , for reports target I changed http protocol to https and also changed port
(Report uses HTTP Fetchlet for getting metrics)
But I am not able to monitor Oracle Reports successfully.
I get the following in EM logs
emias.log
<MetricGetError ERRMSG="Error connecting to <host:port> return status = -1 " ERRID="32" ERRCODE="3">
emagent.trc
2005-01-05 18:29:07 Thread-2228 ERROR ssl: nzos_Handshake failed, ret=29024
2005-01-05 18:29:07 Thread-2228 ERROR http: 652: Unable to initialize ssl connection with server, aborting connection attempt
2005-01-05 18:29:08 Thread-2228 ERROR engine: [oracle_repserv,Ben.<host>_Reports_Server:rep_strep13,ServerPerf] : nmeegd_GetMetricData failed : Error connecting to <host>:4447 return status = -1
Any idea how to do SSL enable targets (in particular Oracle Reports) in 10.1.2 ?

Open and close iPhoto or GarageBand and relaunch FCP X. Sometimes just relaunching FCP X works also. You can trash FCP X preferences as well if the above doesn't work.

How to enable SCCM 2012 clients to get Windows Updates through SSL VPN

I would like my SCCM 2012 client laptops to get Windows Updates through SSL VPN.
I suppose I need to add VPN Subnet in my boundary and boundary group.
What other setting I need to enable?
At this moment, on the 'Software Update Point Component Properties' "Allow intranet-only client connections" radio button is active. Do I neeed to select "Allow both intranet and internet client connections" and Enable SSL communications
for the WSUS server?
or are there something else I need to check?

No, a VPN client is no different than a client connected internally as far as the network is concerned and as far as ConfigMgr is concerned there is no way to explicitly know any different. Internet clients literally are those that connect via the Internet
using IBCM.
Jason | http://blog.configmgrftw.com

How to enable a partner application for Single Sign-On?

Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthil

sharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.

How to enable SSL in iChat 3.1.9

Similar Messages

Maybe you are looking for