How to enable the 3G card on the lenovo x300 647818M under VISTA?

Hi
Anyone knows how to enable the 3G SIM card under the VISTA???
I insert the one 3G card into the backsideof laptop and install the driver. But  i never get any pop up for connect to internet via the 3G sim card.
So, Please help.
Cheers
Alex
Solved!
Go to Solution.

You need a SIM card AND a WWAN card. In brief, your SIM card authorizes you to connect to your wireless provider's network. The WWAN card contains the electronics which connect to your provider's network. Your X300 does not have a WWAN card. Some X300 configurations do.
I don't work for Lenovo. I'm a crazy volunteer!

Similar Messages

  • How to enable the iscsi in Solaris 10

    Dear All,
    Kindly help me,How to enable the iscsi in solaris 10,That box already running in solaris 9,Now we installed solaris 10,In that solaris box separate iscsi card in there,How to enable the iscsi card to access the NAS storage.
    Kindly sent any related PDF document to "[email protected]"
    Thanks in advance,.
    Regards,
    Venkatachalam.M

    Kindly answer the above question please.
    Regards,
    Venkatachalam.M

  • How to enable the S-Video port on a Satelite M30X-154?

    Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
    If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
    When I connect the cable to the laptop, nothing happens!!
    HELP

    Hi,
    Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
    But on mine I have a NVidia Control Panel, where I can configure dualview,
    which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
    When a TV is connected and not recognized, I can enforce recognition there.
    On the next start of the panel, the TV is then available too.
    Perhaps I could help you.
    If not, note that with windows settings your TV will not be available.
    Try to go to the User Interface of your graphics adapter...
    Matz

  • How to enable the EL in jsp page

    hi can u tell 'how to enable the EL in jsp page'?

    *I am getting below exception in tomcat when i inclued +<%@ page isScriptingEnabled="true" isELEnabled="true"%>+*
    org.apache.jasper.JasperException: /index.jsp(1,1) Page directive has invalid attribute: isScriptingEnabled
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:198)
         org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:311)
         org.apache.jasper.compiler.Validator$DirectiveVisitor.visit(Validator.java:106)
         org.apache.jasper.compiler.Node$PageDirective.accept(Node.java:590)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1700)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

  • How to Enable the SAVE button in the Menu Bar of the Invoice Document.

    Hi.
    How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
    I would like to save the Invoice document in PDF  format.
    Regards
    Irfan

    Hi,
    Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
    Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
    So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
    Hope this helps you.
    However, from the print preview you normally would not be allowed to save or print.
    Regards,
    Ram
    Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

  • How to Enable the Oracle BPM Worklist?

    Hi!
    Newbie here.
    So how do you enable the Oracle BPM Worklist?
    Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
    and in section "16.2 How to Enable the Oracle BPM Worklist" it says
    "By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
    To enable the Oracle BPM Worklist:
    -Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
    -Set the EH.INVOKE.HWF property value to true.
    -Reload updates to the AIAConfigurationProperties.xml file."
    However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!

    If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
    In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs.

  • How to enable the comment option in the pdf file

    Hi,
    How to enable the comment option in the pdf file using acrobat sdk[IAC, javascript],
    Give me idea on this to automate.
    If not leave it.
    Regards,
    jkrishnanvenkat

    jkrishnanvenkat,
    I can also do this from Acrobat Pro. Click Comments - Enable for Commentingand Analysis in Adobe Reader. This can not be done through the DSK or JavaScript.
    Gregory

  • How to enable the full list of developer options on A806?

    How to enable the full list of developer options
    Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
    Edited & created a new thread.

    -Go to menu, settings,
    -about phone
    -scroll to the bottom and find "build number"
    -tap it 7 times (upon completion, it will say that you're a developer)
    -the menu is now near the bottom of the main settings menu (just above about phone)

  • How to enable the Exchange 2010 Admin Audit logs in Event Viewer

    How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
    - Sivashankar. Please mark as answer/useful if my contribution is helpful

    Hi Siva,
    We could execute the command below to view Administrator Audit Logging settings:
    Get-AdminAuditLogConfig
    If it is not enabled, please run the command below:
    Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
    In addition, here are some references for you to utilize this feature:
    Configure Administrator Audit Logging :
    http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
    Search the Administrator Audit Log :
    http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • How to enable the memory remapping in the bios?

    How to enable the memory remapping in the bios?
    my laptop: m100 psmaaq-00s003

    Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
    Microsoft released a new update for Flash Player in IE just the other day.
    Have you run Windows Update recently?

  • How to enable the screen after triggering the error message

    Hi All,
    we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
    if not caufvd_imp-proid is initial.
      select single * from t350 into wa_t350
              where  auart    = caufvd_imp-auart
                and  imord    = 'X'.
      if sy-subrc is initial.
        pspel = caufvd_imp-proid.
      else.
        call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
             exporting
                  input  = caufvd_imp-proid
             importing
                  output = l_posid.
        concatenate text-t10 l_posid text-t11
                    into l_textline1 separated by space.
        message i208(00) with l_textline1.
      endif.
    else.
      message e208(00) with 'Please maintain WBS element in Location Tab'.
    endif.
    Thanks

    Hi,
    Instead of error message use status message like
    message s208(00) with 'Please maintain WBS element in Location Tab'.
    Leave to screen sy-synnr.
    This will allow to move to the screen and have in enable mode.
    WIth Regards,
    Dwaraka.S
    Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

  • How to enable the "update file" button to update the data template

    We have an escalated customer bug that the chinese character does not display correctly on report. We want to update the data template xml file on customer site to test the fix. However, when the customer login using "XML publisher Administrator" responsitility, select function "Data Definitions", search and then update the definition, on the update page, the button "update file" next to "Data Template" is disabled. Anyone know how to enable the button?
    screenshot at:
    ftp://bugftp.oraclecorp.com/upload/bug6649637/CannotUpdate.doc
    Thanks,
    Wei

    Unless until it is a Manual Journal, SLA page doesn't give you the provision to change them.
    Even for Manual Journal, it won't allow you to change, if that is transferred to GL.
    Only option is to UNDO the accounting and correct the setup to create correct journals. You may contact Oracle Support.
    By
    Vamsi

  • How to enable the printer option in print priview screen in script

    Hi All,
    Please tell me how to enable the printer option in script print priview screen.
    Thanks & Regards
    Murali

    hi
    the print option TDNOPRINT has to be intial  (' ').  NOT 'X'
    TDNOPRINT  CHAR  1  0  No printing from print preview
    this will do.
    Gr., Frank

  • How to enable the standard price in the accounting -1 view of material mast

    Hi,
    When i was trying to create a material of material Type: FERT, Iam unable to enter the price of the material in the accounting -1 view-> standard price.
    The field has been disabled.
    So please tell me how to enable the standard price.
    Regards,
    Rudra Prakash. S

    hi
    go to OMS2  double click FERT
    in valuation check which price control is allowed
    it should be std. price
    go to OMSR  check MBEW-STPRS  note field group
    in OMS9 for this group and material combination check whether that field is maintained as display
    Vishal...

Maybe you are looking for

  • Two production  orders at the header level one for one single requirement

    Hi Gurus, Please provide me your valuable suggestion on the issue. *Client wants to have a only two production  orders at the header level one for one single requirement .* 1) Manufacturing Order u2013 In this order for Finsihed prodcut system should

  • White Screen of Nothing

    I've been noticing lately that occassionally when I open an application.  I end up with a white screen and nothing else.  It is not consistent.  Last night I attempted to access my SplashID program, it started OK, showed the login screen, I entered m

  • Security filter against AD groups. When you add a computer, does it need to reboot to fall into scope.

    This should be an easy one. I have a 2008r2 domain. When I add a computer to an AD security group, so it will get targeted from a GPO that has that same group in its security filter, does the computer need to reboot to start processing any part of th

  • Declaring the var in the constructer

    How can someone do this without declaring the photos var before the constructer as a field? package org.robotlegs.demos.imagegallery.models.vo     import mx.collections.ArrayCollection;     [Bindable]     public class Gallery         public var photo

  • MPEG2 conversion to .mov

    I got MPEG2 Works 4 Advanced to convert my .TOD files from my Everio camcorder. I needed to do this so that the clips could be manipulated with iMovie. All seemed fine, except the converted files (now .mov) have an intermittent shake of the frame. Th