How to enable the AF Point Illumination in Program mode in Canon 70D ?

Hi,I don't see AF focus points illuminated in any of the modes except Automatic (with and without flash). I remeber seeing this before in P mode. I reset the camera to factory defaults but not yet visible. Wondering if it is a cemra issue. Please let me know if some one has already seen this. I am new to this camera and still learning. I have three lensses 18-55, 55-270 and 16-300mm and they all behave the same way.thanks,Pubudu

pubudu wrote:
Thank for the quick replies.Finally, found it. Not sure how it happened, probably my kids may have changed it.Its under Settngs > C.Fn II : Autofocus > AF point display during focus. I was little worrried as I am heading to Disneyland on wednesday. Tell your kids you'll ship 'em home if they touch your camera during the trip.

Similar Messages

How to enable the S-Video port on a Satelite M30X-154?

Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
When I connect the cable to the laptop, nothing happens!!
HELP

Hi,
Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
But on mine I have a NVidia Control Panel, where I can configure dualview,
which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
When a TV is connected and not recognized, I can enforce recognition there.
On the next start of the panel, the TV is then available too.
Perhaps I could help you.
If not, note that with windows settings your TV will not be available.
Try to go to the User Interface of your graphics adapter...
Matz

How to enable the EL in jsp page

hi can u tell 'how to enable the EL in jsp page'?

*I am getting below exception in tomcat when i inclued +<%@ page isScriptingEnabled="true" isELEnabled="true"%>+*
org.apache.jasper.JasperException: /index.jsp(1,1) Page directive has invalid attribute: isScriptingEnabled
     org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
     org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
     org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:198)
     org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:311)
     org.apache.jasper.compiler.Validator$DirectiveVisitor.visit(Validator.java:106)
     org.apache.jasper.compiler.Node$PageDirective.accept(Node.java:590)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
     org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
     org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
     org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
     org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
     org.apache.jasper.compiler.Validator.validate(Validator.java:1700)
     org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

How to set the out point beyond 9.95 seconds???

how to set the out point in Motion 5 beyond 9.95 seconds???

First you need to make sure your project is long enough then you can adjust the play range (in/out). To make sure the project is long enough:
1. From the project properties (command-J) go to the Duration field and enter a new duration.
2. Click on the down arrow icon to the right of the current time, there is an option to show the project duration. Once set to this you can double click the number and type in a new project duration. I'd recommend setting it back to show current time when done.
3. Of course you can also change the duration of a project when it is first created, in the project browser.
Once you're sure you have a long enough project you can adjust the in and out range. You then use the zoom controls in the bottom of the timeline to show more of the timeline and adjust the play range as needed. There's lots more about project and play range duration adjustments in the documentation: http://help.apple.com/motion/mac/5.1/

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to Enable the SAVE button in the Menu Bar of the Invoice Document.

Hi.
How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
I would like to save the Invoice document in PDF format.
Regards
Irfan

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

How to Enable the Oracle BPM Worklist?

Hi!
Newbie here.
So how do you enable the Oracle BPM Worklist?
Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
and in section "16.2 How to Enable the Oracle BPM Worklist" it says
"By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
To enable the Oracle BPM Worklist:
-Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
-Set the EH.INVOKE.HWF property value to true.
-Reload updates to the AIAConfigurationProperties.xml file."
However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!

If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs.

How to enable the comment option in the pdf file

Hi,
How to enable the comment option in the pdf file using acrobat sdk[IAC, javascript],
Give me idea on this to automate.
If not leave it.
Regards,
jkrishnanvenkat

jkrishnanvenkat,
I can also do this from Acrobat Pro. Click Comments - Enable for Commentingand Analysis in Adobe Reader. This can not be done through the DSK or JavaScript.
Gregory

How to get the entry point in the ActiveX/COM adaptor

below is the description of the Demo of using the ActiveX/COM to call new seq .
API Demo
1. Manually add a Message Popup step to the MainSequence of a
new sequence file. Save the sequence file as launch.seq.
2. Create another sequence file and save the file as caller.seq.
3. In the MainSequence of the caller.seq file, add Action steps
using the ActiveX/COM Adapter to call into the TestStand API and
launch the launch.seq file in a new execution.You might need the
following two methods to complete this step.
. Engine.GetSequenceFileEx
. Engine.NewExecution
so the question as follows:
1.i call the method of get sequencefileEx
2. call the method of getmodlesequenceFile
3.call the method of evalEntryPointNameExpression
4.call the method of NewExecution.
but at the step of 3. i haven't get the entry point.
so how to solve this issue? thanks
Attachments:
QQ图片20140115200924.jpg ‏58 KB
QQ图片20140115201708.jpg ‏100 KB

This is a duplicate post of this:
http://forums.ni.com/t5/NI-TestStand/How-to-get-the-entry-point-in-the-ActiveX-COM-adaptor/m-p/27005...

How to enable the full list of developer options on A806?

How to enable the full list of developer options
Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
Edited & created a new thread.

-Go to menu, settings,
-about phone
-scroll to the bottom and find "build number"
-tap it 7 times (upon completion, it will say that you're a developer)
-the menu is now near the bottom of the main settings menu (just above about phone)

How to enable the Exchange 2010 Admin Audit logs in Event Viewer

How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal Goyal

Hi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

How to enable the iscsi in Solaris 10

Dear All,
Kindly help me,How to enable the iscsi in solaris 10,That box already running in solaris 9,Now we installed solaris 10,In that solaris box separate iscsi card in there,How to enable the iscsi card to access the NAS storage.
Kindly sent any related PDF document to "[email protected]"
Thanks in advance,.
Regards,
Venkatachalam.M

Kindly answer the above question please.
Regards,
Venkatachalam.M

How to enable the AF Point Illumination in Program mode in Canon 70D ?

Similar Messages

Maybe you are looking for