How to enable the "ICMP" feature, pls.?

Hi,
I checked the box of "detect and prevent" of "ICMP" under "Protocol inspection" of SA520. But, it was still left unchecked after I clicked "Apply". Wonder whether the appliance doesn't have this feature yet?
Thanks in advance.
Vincent LIU

go to Application Developer -> Attachments.
You can configure the attachments for your forms here.
--Prasanna                                                                                                                                                                                                                                       

Similar Messages

  • How to enable the Attachment feature in the Receipts Form in EBS 11.5.9

    Hi Community,
    The question is very simple, cause although We have revised most of the posts of the forum and metalink, we do not discover how to enable the attachment feature in Receipts Form, in our release 11.5.9.
    Due to we have a custom receipt form and a standard receipt form, we have try to enable oin both forms, but we do not get it.
    Any clue?
    Thanks for your answers in advance.
    Luis

    go to Application Developer -> Attachments.
    You can configure the attachments for your forms here.
    --Prasanna                                                                                                                                                                                                                                       

  • Query on Enabling the Audit Feature

    I started exploring DSP a week ago through the help of the sample tutorials which BEA has provided.
    But I am not able to figure out how to enable the Audit feature through the Admin console...
    My Audit console is emtpy and shows a blank page.I even checkled the audit console in ldplatform>RTLApp which even shows a blank page
    Is there need for some kind of setting..Please help me to
    enable the auditing

    Audit information will appear in the 'Output' panel in the Test View and the Query Plan View after executing if the application is Audit enabled and the audit 'Severity (threshhold) Level' is set such that audit events are generated. (i.e. if you have the Severity Level set to Failure, then audit events will not be generated for events that specify 'Info')
    There is no 'Audit Console' for DSP.

  • T440s: How to enable the Windows eDrive feature?

    I would like to enable the eDrive feature on my T440s to encrypt my hard drive. How can I do this?
    In order to do so,I enabled "OS optimized defaults" in the bios settingsLoaded them and saved themDid a clean install of Windows 8.1 and removed all partitions during this processInstalled all Lenovo driversInstalled all Windows updatesTried to turn on bit lockerAccording to [1] "If everything is eDrive compliant you won’t be asked whether or you want to encrypt all or part of the drive". However, I am asked whether I want to encrypt all or part of the drive!! So my questions is, what is wrong? How can I enable the eDrive feature? [1] http://www.anandtech.com/show/6891/

    lax20531
    This process below worked for me to enable the eDrive and configure HW-mode BitLocker.  Would you please try it and let me know if it works for you?  If you have any questions about these steps, let me know.
    EDIT 1/9/2014 - these steps still may not work and should be ignored for now.
    Backup your personal data, because we are getting ready to wipe the SSD to enable the eDrive function
    Create the USB Recovery Drive
    Boot the USB Recovery Drive
    Select your language and keyboard layout, as prompted
    click on "Troubleshoot"
    click on "Reset your PC"
    click on "Next", and the target operating system, as prompted
    At the screen about "Do you want to repartition the drives on your PC?", click on "Yes, repartition the drives"  <-- IMPORTANT because eDrive is only enabled when the partitions are recreated.
    Click on "Just remove my files"
    Click on "Reset"
    The PC will be restored with the contents of the USB Recovery Drive.  This will take several minutes, and the PC will reboot itself.  When the process is complete, you will be at the Win8 setup screen "Region and Language", just like when you unboxed your PC and booted it for the first time.
    Go through Win8 setup, connect to network, create your account, etc
    Open Device Manager
    Expand the category "IDE ATA/ATAPI Controllers"
    Double-click on "Intel 8 Series Chipset Family SATA AHCI Controller"
    Click on the "Driver" tab
    Click on "Update Driver"
    Click on "Browse my computer for driver software"
    Click on "Let me pick from a list of device drivers on my computer"
    Click on "Standard SATA ACHI Controller" and then click on "Next"  <-- IMPORTANT since eDrive won't work with the Intel driver.  You must use the Microsoft standard driver instead.
    Click on "Close", then click on "Close" again.  Reboot as prompted.
    Open Control Panel -> System and Security -> Windows Update -> Check for Updates
    Download and install all available Important and Optional updates  <-- IMPORTANT because Win8 itself has some bug about BitLocker.  It is fixed in one of the updates, but I'm not sure which one.
    Repeat steps 23 and 24 until no more Windows Updates are available
    Open Control Panel -> System and Security -> BitLocker Drive Encryption
    Click on "Turn on BitLocker"
    Save the recovery key as prompted, then click "Next".  If you saved the recovery key on a USB drive, be sure to remove the USB drive before continuing.
    Click on "Continue" to run the the BitLocker system check
    Reboot as prompted
    BitLocker should now be running the HW mode
    To confirm it:  open a command prompt as administrator, then run "manage-bde.exe -status".  The Encryption Method should be listed as "Hardware Encryption"
     

  • How to enable the Exchange 2010 Admin Audit logs in Event Viewer

    How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
    - Sivashankar. Please mark as answer/useful if my contribution is helpful

    Hi Siva,
    We could execute the command below to view Administrator Audit Logging settings:
    Get-AdminAuditLogConfig
    If it is not enabled, please run the command below:
    Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
    In addition, here are some references for you to utilize this feature:
    Configure Administrator Audit Logging :
    http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
    Search the Administrator Audit Log :
    http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to enable the S-Video port on a Satelite M30X-154?

    Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
    If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
    When I connect the cable to the laptop, nothing happens!!
    HELP

    Hi,
    Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
    But on mine I have a NVidia Control Panel, where I can configure dualview,
    which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
    When a TV is connected and not recognized, I can enforce recognition there.
    On the next start of the panel, the TV is then available too.
    Perhaps I could help you.
    If not, note that with windows settings your TV will not be available.
    Try to go to the User Interface of your graphics adapter...
    Matz

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

    HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

    There is no current panorama feature.  When iOS 6 is released (Sept. 19) we will find out.

  • How to enable the EL in jsp page

    hi can u tell 'how to enable the EL in jsp page'?

    *I am getting below exception in tomcat when i inclued +<%@ page isScriptingEnabled="true" isELEnabled="true"%>+*
    org.apache.jasper.JasperException: /index.jsp(1,1) Page directive has invalid attribute: isScriptingEnabled
         org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
         org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
         org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:198)
         org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:311)
         org.apache.jasper.compiler.Validator$DirectiveVisitor.visit(Validator.java:106)
         org.apache.jasper.compiler.Node$PageDirective.accept(Node.java:590)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
         org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
         org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
         org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
         org.apache.jasper.compiler.Validator.validate(Validator.java:1700)
         org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

  • How to Enable the SAVE button in the Menu Bar of the Invoice Document.

    Hi.
    How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
    I would like to save the Invoice document in PDF  format.
    Regards
    Irfan

    Hi,
    Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
    Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
    So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
    Hope this helps you.
    However, from the print preview you normally would not be allowed to save or print.
    Regards,
    Ram
    Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

  • How to Enable the Oracle BPM Worklist?

    Hi!
    Newbie here.
    So how do you enable the Oracle BPM Worklist?
    Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
    and in section "16.2 How to Enable the Oracle BPM Worklist" it says
    "By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
    To enable the Oracle BPM Worklist:
    -Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
    -Set the EH.INVOKE.HWF property value to true.
    -Reload updates to the AIAConfigurationProperties.xml file."
    However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!

    If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
    In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs.

  • How to enable the comment option in the pdf file

    Hi,
    How to enable the comment option in the pdf file using acrobat sdk[IAC, javascript],
    Give me idea on this to automate.
    If not leave it.
    Regards,
    jkrishnanvenkat

    jkrishnanvenkat,
    I can also do this from Acrobat Pro. Click Comments - Enable for Commentingand Analysis in Adobe Reader. This can not be done through the DSK or JavaScript.
    Gregory

  • How to enable the full list of developer options on A806?

    How to enable the full list of developer options
    Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
    Edited & created a new thread.

    -Go to menu, settings,
    -about phone
    -scroll to the bottom and find "build number"
    -tap it 7 times (upon completion, it will say that you're a developer)
    -the menu is now near the bottom of the main settings menu (just above about phone)

  • How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

    How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
    Vishal Goyal

    Hi Vishal,
    I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
    look article on below link to enable developer dashboard on specific master pages
    https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
    Let me know if this helps.
    Thanks
    Bhism 

  • How to enable the memory remapping in the bios?

    How to enable the memory remapping in the bios?
    my laptop: m100 psmaaq-00s003

    Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
    Microsoft released a new update for Flash Player in IE just the other day.
    Have you run Windows Update recently?

Maybe you are looking for

  • Why can't Siri find out who the artist is of a song the name of the artist isn't music?

    I was trying to find out who made the parody of John Anderson's song Swingin using these lyrics ( I was standing on the front porch seeing ugly from her head to her toes and we were standing) the first time I asked she said I can't do that Genius isn

  • Bought a used HP Coler Laserjet 4700N and don't know how to hook up.

    I just bought a HP Color Laserjet 4700n printer from a place that just sold out.  I didn't any cords to connect it to my Del Dimensions E520 couputer.   I am just a computer user and connecting this printer sounds a bit complicated.  I didn't get any

  • External hard drive filesystem to use for both pc and mac

    hi everyone, i've got a 120 gig portable WD passport harddrive that i'm planning on using to move files between my pc and macbook. it is recognized fine on both and I am able to copy files to my macbook but cannot write files to it, i'm assuming it h

  • Exchange Server 2010 usage monitoring

    Dears    How we can monitor Exchange server 2010 usage like owa usage, mail sending, contact Adding and editing ...etc. is exchange has tools to do that or i have to use system center if yes what version of system center is Enterprise or Standard?

  • Impact of EU check box in OY01 transaction

    Hi, Can any one explain me the impact of EU check box in OY01 transaction code, as per my knowledge if we selectthe EU check box the country for which we selected the check box it will fall upder the EU tax countries and the same by default will appe