How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

Similar Messages

  • How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

    How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
    for this responsibility i need to have teh sets enabled. how to do teh same.
    similar to OM ADMIN as shown below:
    Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
    regards,
    bala

    AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

  • How can I disable the memory sharing with the video?

    how can I disable the memory sharing with the graphic card? it makes me impossible to run a software, grandMA2, on windows 7 installed and run via bootcamp. where should I look for changing the preferences of memory and video, on lion or on windows7? thank you

    so what do you think. I run a software on windows 7 running via bootcamp on my mbp, but I can't open it. the software is compatible with windows 7 on mac. I tried opening it as administrator or changing the compatibility options, like running it as windows xp, and changing the resolution of the video. it can't build the window and then it crashes. on internet I found a compatibility list of the software where it says please do not use any shared memory for the graphic card. what does it mean? I have just to remove the check in automatic graphics switching? what should I try to do? thank you. 

  • I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?

    I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
    If so, what do I need to d

    WOsloop_ORD wrote:
    I have a MacBook, do I need to clear the memory or defragment the disk like I need to do on my work pc with Windows?
    No you don't.
    Mac's auto-defragment by writing 2GB+ sized files and smaller to one space on the drive, so you really don't need to worry about it.
    If your going to parititon your drive or need a large space of free space, then Carbon Copy Cloning the entire OS x parittion to a external drive, option booting off of it and then erasing and reverse cloning is the approved  method of defragmenting and freeing up disk space, rahter than using defragmentaiton software that can cause issues and make the machine inoperatible.
    http://www.bombich.com/
    If you need steps to *cough* clean your Mac of caches and whatnot less your kid/wife/mother/girlfriend/boss, see's it then the steps are as follows.
    1: Clean/clear your browser caches first, delete your history etc. from within the program itself, delete any files on the machine by dragging to Trash and emtpy Trash (secure erase not needed if you follow the steps later)
    2: Download CCleaner for the Mac and run that
    3: Download OnyX for the Mac and run all the cleaning and maintainece, reboot at the end.
    4: For scrubbing hard drives of traces (deleted files), use Apple's Disk Utility > Erase Free Space option: Zero (or 7x if you need military/foresic level type deletion, but it takes overnight to complete)
    Make sure your browser plug-ins are current, Flash, Silverlight especially.
    https://www.mozilla.org/en-US/plugincheck/
    And your Mac needs more codecs, search for Perian, VLC and Flip4Mac, install those.

  • I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    I am unable to download pictures from my Sony Cybershot to my iMac, I have tried using the USB port as well as simply inserting the memory stick into the slot.  I have been able to do this in the past as recently as a few weeks ago.... Help please..

    Thanks Eric for responding.
    I checked and it does not appear in the Applications folder.
    I tried yesterday on an ethernet connection with a download speed of 2 Mbps but, unfortunately the connection died(It happened from the ISP end, which is out of my control) in between after which there was no trace of the download that happened for so long(till the internet connection death). 
    One more serious query which I am unable to understand. If the internet connection, dies in the midst of the download is in progress why is it so that the state does not persist and one has to restart the entire process again. Is there no solution for this?
    I tried so many times and its the same case after some amount of download it vanishes. So many unsuccessful attempts. I am ****** off now. Is it not possible to see Mavericks? Why does different machines of Apple behave differently? Somewhere it goes smoothly and somewhere like my mine. Why did not Apple release a non apple store version? Is this not a bad sign of letting the users struggle when something is being offered for free?
    The reason I asked as whether we can download the .app of Mavericks is that, there are so many applications that I have downloaded web and have installed. All that works fine. Can't we do the same here? You download a copy of Mavericks installer application and upload it for me in Google drive or like online storage places which can be downloaded and used by me? Help me understand.
    Thanks again.

  • My ipad shows capacity 13.6GB, available 0 bytes. Can I clear some items from the memory to increase the avaavailable memory?

    my ipad shows capacity 13.6 GB, available 0 bytes. Can I clear some items from the memory to increase the available memory?
    Getting message "storage almost full"

    One usually large user of storage space is photos and videos. You could import them to a computer and then delete them from the iPad: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
    You can also go to Settings > General > Usage and click on "Manage Storage" (in the Storage section, not the iCloud section) and that will show what is using the storage and may help you decide if you want to delete some apps or something else.

  • I changed the memory settings in the KT6V Bios.

    I changed the memory settings in the KT6V Bios without flashing to the latest bios update.  Now the system won't post and of course I learned afterwards you shouldn't mess with memory settings.
    I did everything, cleared the cmos(several times with and without the battery), also tried to do the bios recovery but that didn't work.  And yes I have the 4-pin plugged in, I also tested all the parts on another motherboard and they work fine with it.
    So is the board fubared?  I just bought it the other day, it's a long drive to take it back where I got it from so if anyone knows if there is a possible way to recover it please let me know!

    Quote
    Originally posted by labtech1
    If you are getting four red leds on the dled bracket and the board is making no attempt to post there is little chance that you will be able to recover the bios if you were using a version prior to 1.3. The emergency bios recovery procedure is detailed here:- http://www.msi.com.tw/html/support/bios/note/boot.htm or you can try tapping the F10 key followed by "Y" on the keyboard to see if you can trigger the bios flash recovery procedure that way. It did not work for me. Good luck. Post back with your results.
    Ya I'm getting the four red led's and I've tried everything and still no post.  Geez, I can't believe this, I've never seen a motherboard die by just changing the memory setting from normal to fast...this is quite irritating.

  • How to enable USB 2.0 on the MEGA 651 - found a way

    Very important question...
    How did you guys enable the USB 2.0 ports? I plugged a device in the front ports today, only to be told that there are no USB 2.0 drivers installed...
    The MSI CD that came with the MEGA only has drivers for W2k, and my XP installation won't recognize them... (kind of idiotic, considering MSI strongly advocates using the 651 with XP !?) BTW, I have WinXP SP2 ...
    *edit* I figured out the procedure - allow Windows Update to operate automatically, reboot, make sure you've enabled USB 2.0 in BIOS, then when everything's up and running again, just plug in again a 2.0 device... the machine will do the rest... just don't do what I did... on the first try, I realized all this time I had my USB 1.1 keyboard plugged in... :D
    Also, how did you get the modem to be seen/properly installed by the system? No conflicts with the other devices?

    Welcome to Apple Discussions. In fact, welcome to the Discussions for the new iMac Intel Core Duo!
    You may get a better/quicker response from folks with a Mac like yours.
    Here is a link to the correct forum for your post;
    iMac (CRT)
    However, I do not believe what you are asking is possible. You should have 2 older USB ports, version 1.0 I think.

  • How to Enable a Push Button In The Form That Is Always Greyed Out?

    Greetings All,
    I am trying to enable an existing "Return" Push Button(PB) which is always greyed out whenever the form is called in either an update or review mode. After some research, I found that this PB's functional property is "Enabled" (i.e. the enabled value = 'Yes'), and it is coded programatically set 'Off' in 30 places and 'On' in 2 places in the form that I inherit from my predecessor by using the following code:
    SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN', <XXXXX>);
    Where <XXXXX> could be either TRUE or FALSE. I've been spending a lot of time in trying to enable this "Return" PB (without modifying the existing programming code) by adding the 'SET_ITEM_ON_OR_OFF' built-in command to set the PB on in WHEN-BUTTON-PRESSED TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE Trigger, but all tries in vain. Could you please help me with the following question?
    What is the easiest way to enable a PB that is set programmatically?
    Is there something else I should know to enable a PB, in addition to what I have already mentioned above?
    Thanks in advance,
    Jinlan
    --

    Thanks all for your information and help. I included the following code, as suggested by Manu, in WHEN-MOUSE-DOWN TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE TRIGGER:
    SET_ITEM_PROPERTY ('BLK_UPDATE.PB_RETURN_WORK_REQ', ENABLED, PROPERTY_TRUE);
    and I made sure there was no " SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN_WORK_REQ', FALSE);" statements after the above code, but, the "Return" PB is still in grey; in other words, it is still not accessible when my form is called.
    Perhaps, I need to place the above SET_ITEM_PROPERTY code in a different trigger other than the triggers mentioned above, uh? Any thoughts on this?
    Manu,
    You are absolutely right that the "SET_ITEM_ON_OR_OFF" is an ih-house written procedure which is defined/stored in the Attached Libraries. (I should have checked before making the "built-in" assumption. Thanks for catching and clarifying this.) Please help me with the following questions:
    How do I view the procedure in the Attached Libraries???
    Thanks in advance,
    Jinlan
    --

  • How to enable a check box using the table LVC_S_FCAT

    hi,
    I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

    Hi Preethi,
    try to set default the check-box with the
    value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
    '-' field is not shown, ' ' and 'X' is normal)
    and see the differences.
    Hope it helps.
    Regards, Dieter
    Sorry, i thought you meen enable not editable.
    Message was edited by: Dieter Gröhn

  • How to enable an axis without affecting the others ?

    I use an 7340 4 axis card with MID7654 driver unit. I have to make several independant programs, using each 1 or 2 of the 4 available axis on the card. I wonder how to enable/disable a single axis without affecting the other, because the "enable axis" VI is not three states : an axis can only be enabled or disabled, but not "not affected". I didn't find any NIMotion VI to do it or to give "all axis" information.
    Any idea ?

    Hi,
        It is possible to check the states of the axis with the function "Read per axis status".
        It is possible to eanable and disable axis with the function "Enable axis".
        Hope it can help.
    .NIDays2008 {font-family:Arial, Helvetica, sans-serif; font-size:12px; color: #065fa3; font-weight: bold; text-decoration: none; text-align: right;} .NIDays2008 a, a:hover {text-decoration: none;} .NIDays2008 a img {height: 0; width: 0; border-width: 0;} .NIDays2008 a:hover img {position: absolute; height: 90px; width: 728px; margin-left: -728px; margin-top:-12px;}
    >> Avez-vous entendu parler de NI Days ?

  • I opened up a kingston memory stick last week on my computer and it worked fine.  This the memory stick will not open in my computer.  How do I find the memory stick if the icon does not come up on my desktop screen?

    I cannot seem to open back up my memory stick.  I dragged the "icon" to the trash bucket before I pulled the stick out.  The memory stick icon no longer shows up on my computer.  It also will not open on any other computer.  Is there anyway to find the memory stick when its plugged in with out having the icon show up?

    You might try the obvious, although I have seen memory sticks fail.  Good luck.
    1)Remove the memory stick
    2) Shut the computer down
    3) Restart the computer
    4) Login
    5) Re-insert the memory stick

  • How to enable Party Information DFF at the branch level only in R12

    As we all know now bank and branch information are stored at the HZ_Parties level. I want to have a DFF only at the branch level.
    This DFF shouldn't appear in neither at bank level, customer maintence level or supplier level.
    I tried to build by custom value set(CE_BANK_BRACHES_V) and attached to the above DFF context and still now luck to show the DFF at only the branch level.
    Any ideas???
    Thanks

    Hi,
    This can be done by personalize the BWC screen by clicking on the personalization at the top left corner.
    Regards,
    Kamal Khafagy

  • Playing music off the memory card through the FM t...

    How do I play an full album off the memory card? Currently it will only play one song at a time then stop? As I'll end up with a few albums on the mem card, this obviously will become very annoying as I can't store them on the phone memory!
    Solved!
    Go to Solution.

    What many don't realise is that the memory card is more to blame than the phone it self when the phone freezes like that.
    Show your appreciation. Hit that kudos button real hard

  • Does Lightroom 5 automatically eject the memory card once the photos are imported?

    I use Macbook and ever since I installed Lightroom, the memory card no longer shows up under 'devices' in Finder, therefore I am unable to eject it.

    How is it showing in LR. As a separate drive with green indicator or under Hard Disc Volumes folder?
    If it shows under volumes you may need to choose to hide as a parent folder.
    See this link:
    http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html
    Otherwise how are you copying the images. To hard drive pictures or external hard drive?
    You can set the prefs to automatically detect a camera memory card and in the import dialog choose auto-eject.
    See this video tutorial;
    http://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

Maybe you are looking for