How to enable the script label of a text frames in indesign using applescript
hi all,
am using Indesign CS2 with applescript..
Using script I have to open a template in indesign and flow the word document into it...
I can able to flow the word document into the template using "Place" command..but script labels of the text frames gets disabled...
I need the script labels to be enabled...
can anybody help me
thanks in advance
Script labels can't be disabled, so I'm not sure what your problem is -- perhaps seeing some code could help. Could it be that you're referencing a page item by label, but it is not responding because the item is part of a group?
Shane Stanley <[email protected]>
AppleScript Pro Sessions <http://scriptingmatters.com/aspro>
Similar Messages
-
How to enable the printer option in print priview screen in script
Hi All,
Please tell me how to enable the printer option in script print priview screen.
Thanks & Regards
Muralihi
the print option TDNOPRINT has to be intial (' '). NOT 'X'
TDNOPRINT CHAR 1 0 No printing from print preview
this will do.
Gr., Frank -
How to enable the submit data is smart view?
how to enable the submit data in smart view? i entered the data and select the row and column
i connection is ok...
please hlep me outhi
I have two sheets one sheet1 and sheet2. inthe sheet1 is i entered the data and reflected in sheet2 through scripts (given below)
HsSetValue(('Sheet3'!D3*1000),$D$1,""&$C$2&""&$D$2&";"&$C$3&""&$D$3&";"&$A$7&""&C$7&";"&$F$3&""&$G$3&";"&$I$1&""&$J$1&";"&$I$2&""&$J$2&";"&$A$6&""&$B$6&";"&$I$3&""&$J$3&";"&$A$1&""&$B$1&";"&$A$8&""&$A9&";"&$F$1&""&$G$1&";"&$F$2&""&$G$2&"")
then the submit data button is disable....
any idea of this to sove the issues i checked the shared service i am entering in admin access.. excel versions is 2002 and hyperion system 9 v
please help me out -
How to print the script in condensed mode
Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj. -
How to enable the S-Video port on a Satelite M30X-154?
Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
When I connect the cable to the laptop, nothing happens!!
HELPHi,
Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
But on mine I have a NVidia Control Panel, where I can configure dualview,
which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
When a TV is connected and not recognized, I can enforce recognition there.
On the next start of the panel, the TV is then available too.
Perhaps I could help you.
If not, note that with windows settings your TV will not be available.
Try to go to the User Interface of your graphics adapter...
Matz -
How to enable the EL in jsp page
hi can u tell 'how to enable the EL in jsp page'?
*I am getting below exception in tomcat when i inclued +<%@ page isScriptingEnabled="true" isELEnabled="true"%>+*
org.apache.jasper.JasperException: /index.jsp(1,1) Page directive has invalid attribute: isScriptingEnabled
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:198)
org.apache.jasper.compiler.JspUtil.checkAttributes(JspUtil.java:311)
org.apache.jasper.compiler.Validator$DirectiveVisitor.visit(Validator.java:106)
org.apache.jasper.compiler.Node$PageDirective.accept(Node.java:590)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2388)
org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2394)
org.apache.jasper.compiler.Node$Root.accept(Node.java:489)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2338)
org.apache.jasper.compiler.Validator.validate(Validator.java:1700)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:178)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:306)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:273)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:566)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803) -
How to print the script before realasing?
how to print the script before realasing?
Do you want to see the output of your SAPscript??and print it?? before you release.
Then goto NACE tcode and configure your script.
Example :
Goto Transaction NACE --> Select Application V1(Sales) --> Click on Output Types --> Select the output type as BA00 (as generally BA00 is the output type associated with Sales Order ) --> Double click on the Processing Routines folder on the left and it will display the Form name and the corresponding driver programs name.
Goto tcode VA03, and display the output from menu and do your printing.
Close the thread once your question is answered.
Regards,
SaiRam -
How to get the script of a table or view in SQL Developer?
Dear friends/expert,
Could you tell me how to get the script for a view or a table easily in SQL Developer like pressing F4 in TOAD?
I found that I can press SHIFT+F4 for a view in SQL Developer and get the script of the view in Details Tab. But how to move the script to SQL worksheet to edit? It is very easy to do in TOAD.
And I didn't find a way to get the script for a table till now. Is there any way to do that?
Thanks in advance.
Best regards,
Ning1. Although the team might put a lot of effort in keeping track on the forum, a lot of posts still go by without answer.
2. If you have an enhancement request, log it at the announced SQL Developer Exchange, so others can vote to add weight on the issue. Be clear and detailed in the explanation.
3. Given the structure of the application, I guess it won't be easy (maybe impossible) to add the functionality you are asking. Do you have a suggestion on how to access the info?
4. If your request gets accepted, still another year or two may go by until the functionality gets added. For sure you'll be better off writing a user defined extension or report (querying DBMS_METADATA.GET_DDL).
Hope that helps,
K.
Edited by: -K- on 12/01/2009 09:37 -
How to Enable the SAVE button in the Menu Bar of the Invoice Document.
Hi.
How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
I would like to save the Invoice document in PDF format.
Regards
IrfanHi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM -
How to Enable the Oracle BPM Worklist?
Hi!
Newbie here.
So how do you enable the Oracle BPM Worklist?
Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
and in section "16.2 How to Enable the Oracle BPM Worklist" it says
"By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
To enable the Oracle BPM Worklist:
-Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
-Set the EH.INVOKE.HWF property value to true.
-Reload updates to the AIAConfigurationProperties.xml file."
However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs. -
How to enable the comment option in the pdf file
Hi,
How to enable the comment option in the pdf file using acrobat sdk[IAC, javascript],
Give me idea on this to automate.
If not leave it.
Regards,
jkrishnanvenkatjkrishnanvenkat,
I can also do this from Acrobat Pro. Click Comments - Enable for Commentingand Analysis in Adobe Reader. This can not be done through the DSK or JavaScript.
Gregory -
How to download the script data into pdf file
how to download the script data into pdf file
i have one option to download the script data to pdf file --->rstxpdft4 program.
i have one doubt how to use this proogram.or any function module to download the script data to pdf file.
Thanks and regards,
Sri.Hi Sri Sai,
I know one method to convert the sapscript to pdf file :
first generate a Spool Request for the required Sapscript
then goto transaction SP01 and copy the generated Spool Request number
now execute the SAP report RSTXPDFT4
here enter the copied Spool request number and the target directory into the parameters
execute the report
required pdf file will be generated into the target directory
i hope it will help you out
Please refer this simple program:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Reward points if found helpful....
Cheers,
Eshwar. -
How to enable the full list of developer options on A806?
How to enable the full list of developer options
Moderator note:Moved from http://forums.lenovo.com/t5/Lenovo-Android-based-Tablets/No-Animation-speed-options/td-p/1359241
Edited & created a new thread.-Go to menu, settings,
-about phone
-scroll to the bottom and find "build number"
-tap it 7 times (upon completion, it will say that you're a developer)
-the menu is now near the bottom of the main settings menu (just above about phone) -
How to enable the Exchange 2010 Admin Audit logs in Event Viewer
How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpfulHi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support -
How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal GoyalHi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism
Maybe you are looking for
-
hey guys, wats up i want some information on the procedures and policy with returning or exchanging a tablet the has a active warrenty. the damage to the table was actually caused by the user would that affect the process of returning
-
How can I get the latest version of Adobe Flash Player to download on my Mini Mac 10.6.8?
-
Rows not deleted after delete in BefExportToDat Script in FDM
Hi I am using FDM ERPI to load data from Oracle eBS GL 1.5 to Oracle Hyperion Planning 11.1.2.1. I have to slit data coming from eBS to 2 Essbase applications, using a temporary table : Location1 (data to app1) : I have to load data on accounts liste
-
SAPCCMSR not started in sapmmc for trex
HI. We have TREX7.0 system. In trex mmc sapccsr agent is not running. As per some guides we registered sapccmsr agent using sapccmsr pf=<instprofile> -j2ee -r to central solution manager system in services sapccmsr agent is registerd and started but
-
Unable to see Applications under navigate tab in Planning browser
Unable to see Applications under navigate tab in Hyperion(9.3.1) workspace I have installed all Hyperion 9.3.1 products as per installation document Please Can any one tell me the solution. i have one more question .already i installed Hyperion Share