How to enable turbo boost in my machine

i have hp( pavilion 15-n240se) .
my operating system is windows 8.1 .
product number:F9U42EA#ABV
i want to know if my processor goes to turbo boost mode automatically or i should enable it in some how

Hi,
The system itself will handle the process that means automatically.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How to Enable Turbo Boost?

I have HP Pavillion G6 (core i5 2430M) .. I want to know how to enable turbo boost?

Intel® Turbo Boost Technology is a way to automatically run the processor core faster than the marked frequency if the part is operating under power, temperature, and current specifications limits of the Thermal Design Power (TDP). This results in increased performance of both single and multi-threaded applications. Intel® Turbo Boost Technology 2.0 takes advantage of the power efficiencies introduced with having an integrated die for processor and graphics. It is also optimized for the new micro-architecture that was introduced with the Intel® Core™ i7-2xxx processor series and the Intel® Core™ i5-2xxx processor series.

MSI X58 PLATINUM, the latest bios and how to enable turbo boost

1) Wich motherboard is ? MSI X58 PLATINUM or MSI X58 PLATINUM SLI ?
2) What is the lastest version Bios and where can i get ?
3) How to enable turbo boost in this motherboard ?
4) Thanks so much guys.

My bad. The obvious lack of your self research got the better of me. I do not take helping, if I can, lightly. This is new technology, & a lot of expertise is in short supply. I downloaded the manual on this board & read the bios section, & in CMOS Setup, you should find an "Enable" setting for Turbo Boost. If you don't, please contact MSI Tech Staff @ http://ocss.msi.com.tw Also, (in your manual), is a reference under "Intel Turbo Boost Tech", which clearly states "for further information please refer to Intel's official website". By your original post, CPU-Z says it's an SLI? What did you buy? Does it say on the retail box? At MSI's website, the X58 Platinum (not the SLI), has version 1.0 bios offered in three global region zip files. M7522v1.0 Euro.zip, M7522v1.0 ASIA.zip, & E7522v1.0.zip. J.T.N. is correct, the SLI board takes something else. Are both boards bios's compatable? I have no idea. Recommend step one as to confirm with MSI what board you truly have & go from there.

How to enable USB drive in Virtual Machine Oracle VM?

Hi,
I just create Oracle Enterprise Linux 5.3 and Windows server 2003 Virtual Machine in Oracle VM. I want to use USB drive in each virtual machine.
How to enable USB drive in Virtual Machine Oracle VM?
Thank you very much for your helping.
Fujimaru

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to activate turbo boost feature in new mac book pro

how to activate turbo boost feature in new mac book pro

Intel® Turbo Boost Technology 2.01 automatically allows processor cores to run faster than the rated operating frequency if they’re operating below power, current, and temperature specification limits.
Intel Turbo Boost Technology 2.0 is activated when the Operating System (OS) requests a frequency higher than the rated frequency of the processor. Whether the processor enters into and the amount of time the processor spends in the Intel Turbo Boost Technology 2.0 state depends on the workload and operating environment.
http://www.intel.com/content/www/us/en/architecture-and-technology/turbo-boost/t urbo-boost-technology.html

How do i turbo boost my 2.7 i7 macbook pro 15" retina to 3.7?

Hello everyone...
...can someone tell me how to turbo boost my 2.7 i7 macbook pro 15" retina to 3.7?
Being quite new to laptops (my G4 lasted me 9 years!) I'm not quite sure what to do or look for.
Any advice much appreciated!
Glenn

Turbo boost isn't user controlled, it's technology that automatically (and dynamically) kicks in based on the usage of your machine. For more information:
http://en.wikipedia.org/wiki/Intel_Turbo_Boost
Or just google, 'Intel Turbo Boost' for tons of resources.

How do i turbo boost my iMac late 2013 from 2.9GHz to 3.6GHz?

Hello. So i was checking out the apple store for iMacs and i saw that i could tubo boost my iMac from 2.9GHz to 3.6GHz. How do i do that? Is there any program to do that or what? I have the latest iMac:
21.5-inch: 2.9GHz
2.9GHz quad-core Intel Core i5
Turbo Boost up to 3.6GHz
8GB (two 4GB) memory
1TB hard drive1
NVIDIA GeForce GT 650M with 512MB
If you look on the second row, you see that it says turbo boost up to 3.6GHz.
Please help me, as i want a faster computer
-Kladdy

It works when it needs to permitting power is available, and it isn't too hot basically. You shouldn't need to do anything.
From Intel:
Intel Turbo Boost Technology is usually enabled by default. You can disable and enable the technology, only through a switch in the BIOS, there are no other user controllable settings. Once enabled, Intel Turbo Boost Technology works automatically under operating system control.
Source: http://www.intel.com/support/processors/sb/CS-029908.htm

How to enable microsoft system center virtual machine manager Management Pack IP Pool monitoring

How to I enable how to enable IP Pool monitoring in the Microsoft System Center Virtual Machine Manager Management? The IP Pools show up in the IP Address Pool Health dashboard, but the state is "Not Monitored". How to I get these to light up
as monitored?

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How does the Turbo-boost works on the Intel i7?

Just bought the new MBP Retina and would like to know how the Turbo Boost works in my processor. Is it a regular upgrade like buying a new processor or is it something I could menage at the settings and have it boosted up?
Thanks,

Intel's definition:
Any of the following can set the upper limit of Intel Turbo Boost Technology 2.0 on a given workload:
Number of active cores
Estimated current consumption
Estimated power consumption
Processor temperature
When the processor is operating below these limits and the user's workload demands additional performance, the processor frequency will dynamically increase until the upper limit of frequency is reached. Intel Turbo Boost Technology 2.0 has multiple algorithms operating in parallel to manage current, power, and temperature to maximize performance and energy efficiency. Note: Intel Turbo Boost Technology 2.0 allows the processor to operate at a power level that is higher than its rated upper power limit (TDP) for short durations to maximize performance.

How does Intel Turbo Boost work?

I have the i7-2620M CPU. How does turbo boost work on my Mac. And what is the max GHz speed for Turbo Boost 2.0 in 2011 MBPs?

If you would like some more detailed information that amplifies Kappy's succinct but correct answer, please read this:
http://news.cnet.com/8301-13512_3-10362882-23.html
Though the article is several years old, the principles remain the same.
Ciao.

How to disabled Turbo Boost in Lenovo IdeaPad V570?

I looked in the BIOS, but the layout "Advanced" hidden.
Can still know how to disable TurboBoost?
(sorry for my english)
Solved!
Go to Solution.

2yigit, thank you. I'll wait for your answer, as well as look for himself. Maybe find a solution. If that - otpishu in this topic. But something tells me that the best solution to this problem -the discovery of hidden partitions bios. But how? No idea.
2Duck3, thx. Forgive me for what I brought you a little information. I have a laptop - Intel Core i5-2410M. And in the BIOS, as stated above, I have a hidden partition where you can change the number offactors, frequency and so on.
PS> Sorry for my english. 2yigit, u have userbar on russian. Do u know Russian?

How to enable Integration server on remote machine setup

Hi All,
My probelm is this as per my scenario;
-I am using two machines.
-One I configured with Weblogic8.1 Platform and using Admin Server.
-Second I configured only Integration Platform and wanna to use Integration Server.
SO, after all this I have started my Admin server and managed(Integration) server.
-Then I deployed the one of Integration.ear file on my configured managed server,
it goes success. Then I started Integration console through the Admin Server URL.
Now my problem is this that when i am having Integration console there in a console
am not able to see the deployed files or processes or any thing over there in
integration console that shows that integration is running.
Can any one help me in this regard. I do appreciate this.
Sameer.

Hi Greg,
Thank's for your advices.
Greg One thing i am not getting that is we are if we are having different platforms(i.e
Integration , Portal and Simple Application) running on different machines but
all machines are configured under one domain and everything you are managing through
one Admin Server which is also running on different machine. SO, if you are deploying
application that has to deploy on Admin Server!!!! OR to the concerned Server?
Sameer
"Greg" <[email protected]> wrote:
>
Sameer:
If these machines are in one domain (cluster) you should deploy to the
admin server.
I believe the admin server deploys copies of the .ear files to the managed
server(s).
I am not positive about Integration running on only the managed server.
You
would have to seek advise if WLI should run on admin and managed servers?
Greg
"sameer" <[email protected]> wrote:
Hi All,
My probelm is this as per my scenario;
-I am using two machines.
-One I configured with Weblogic8.1 Platform and using Admin Server.
-Second I configured only Integration Platform and wanna to use Integration
Server.
SO, after all this I have started my Admin server and managed(Integration)
server.
-Then I deployed the one of Integration.ear file on my configured managed
server,
it goes success. Then I started Integration console through the Admin
Server URL.
Now my problem is this that when i am having Integration console there
in a console
am not able to see the deployed files or processes or any thing over
there in
integration console that shows that integration is running.
Can any one help me in this regard. I do appreciate this.
Sameer.

How I can enabled toorbo boost

I have intel core i7-3520m on my Lenovo G780 and I can't find how to enabled turbo boost.

there is not option the the bios or any other place to enable or disable turbo boost, it is enabled by default. But if you want to be sure that it is working I suggest you download intel turbo boost technology monitor
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

Intel Turbo Boost-Overcloacking

I have hp envy notebook pc with intel core i7 4700mq proccessor and i want to know how to enabled turbo boost ?
Can i overclock the proccessor to the max frequency ?
This question was solved.
View Solution.

turbo boost is just enabled unless disabled in the BIOS. There is no way to overclock your laptop. You can install this little app to track the turbo boost and be sure it is working:
http://www.majorgeeks.com/files/details/intel_turbo_boost_technology_monitor.html
If this is "the Answer" please click "Accept as Solution" to help others find it.

MSI GE70 2OE - turbo boost doesnt work ?

Hey all,
im confused of intel turbo boost technology.
I think my notebook wont boost up and I dont know why. My bios is locked so I can not do any overclocking ...
I dont know why but i can not install intel extreme tuning (dont launch when istalled ...)
My power plan settings: maximum performance (100% CPU in detailed settings)
CPU still shows max 2,4 GHZ (in HWinfo) here's the screen:
Also, my question is: how to enable turbo boost when my bios is locked ?

Thank you for answer.
Yes you're right but it isnt my case.
I have already solved it. Problem was here:
battery and power cable (both together) must be connected in notebook at same time !!
Otherwise turbo boost will be permanently off. So, not only battery or power cable affects this turbo effect,.. but both of this things must be plugged in notebook at same time ... :/ damn

How to enable turbo boost in my machine

Similar Messages

Maybe you are looking for