How to enable USB 2.0 on the MEGA 651 - found a way

Very important question...
How did you guys enable the USB 2.0 ports? I plugged a device in the front ports today, only to be told that there are no USB 2.0 drivers installed...
The MSI CD that came with the MEGA only has drivers for W2k, and my XP installation won't recognize them... (kind of idiotic, considering MSI strongly advocates using the 651 with XP !?) BTW, I have WinXP SP2 ...
*edit* I figured out the procedure - allow Windows Update to operate automatically, reboot, make sure you've enabled USB 2.0 in BIOS, then when everything's up and running again, just plug in again a 2.0 device... the machine will do the rest... just don't do what I did... on the first try, I realized all this time I had my USB 1.1 keyboard plugged in... :D
Also, how did you get the modem to be seen/properly installed by the system? No conflicts with the other devices?

Welcome to Apple Discussions. In fact, welcome to the Discussions for the new iMac Intel Core Duo!
You may get a better/quicker response from folks with a Mac like yours.
Here is a link to the correct forum for your post;
iMac (CRT)
However, I do not believe what you are asking is possible. You should have 2 older USB ports, version 1.0 I think.

Similar Messages

How to enable USB drive in Virtual Machine Oracle VM?

Hi,
I just create Oracle Enterprise Linux 5.3 and Windows server 2003 Virtual Machine in Oracle VM. I want to use USB drive in each virtual machine.
How to enable USB drive in Virtual Machine Oracle VM?
Thank you very much for your helping.
Fujimaru

Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
for this responsibility i need to have teh sets enabled. how to do teh same.
similar to OM ADMIN as shown below:
Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
regards,
bala

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

How to Enable USB Internet Dongles and only Block USB storage device from Group Policy

Hi ,
I have a very urgent requirement , Is there a way to disable the USB and only enable to Internet Dongle using Group policy.
Regards,
Schan.

Hi,
Checkout the below link for restricting the access for USB devices using Group Policy,
http://www.windowsecurity.com/articles-tutorials/authentication_and_encryption/Control-USB-Devices-Group-Policy.html
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/89c8a8f0-da98-4cc9-8044-1e457e26840e/how-to-disable-usb-internet-dongle-datacard-from-group-policy-server-2008-r2?forum=winserverGP
Regards,
Gopi
www.jijitechnologies.com

How to enable a check box using the table LVC_S_FCAT

hi,
I am working on reports. I have to have a check box and i am using the table LVC_S_FCAT to get the check box, i am getting the check box. how to enable it.

Hi Preethi,
try to set default the check-box with the
value '0', '1', '-', ' ' and 'X' (0/1 -> only display,
'-' field is not shown, ' ' and 'X' is normal)
and see the differences.
Hope it helps.
Regards, Dieter
Sorry, i thought you meen enable not editable.
Message was edited by: Dieter Gröhn

How to enable an axis without affecting the others ?

I use an 7340 4 axis card with MID7654 driver unit. I have to make several independant programs, using each 1 or 2 of the 4 available axis on the card. I wonder how to enable/disable a single axis without affecting the other, because the "enable axis" VI is not three states : an axis can only be enabled or disabled, but not "not affected". I didn't find any NIMotion VI to do it or to give "all axis" information.
Any idea ?

Hi,
    It is possible to check the states of the axis with the function "Read per axis status".
    It is possible to eanable and disable axis with the function "Enable axis".
    Hope it can help.
.NIDays2008 {font-family:Arial, Helvetica, sans-serif; font-size:12px; color: #065fa3; font-weight: bold; text-decoration: none; text-align: right;} .NIDays2008 a, a:hover {text-decoration: none;} .NIDays2008 a img {height: 0; width: 0; border-width: 0;} .NIDays2008 a:hover img {position: absolute; height: 90px; width: 728px; margin-left: -728px; margin-top:-12px;}
>> Avez-vous entendu parler de NI Days ?

[Planning-Workflow]How to enable Reviewers/Approvers to edit the data submitted by Planners ?

Hi,
Traditionally in Planning 11.1.2.x, edits into data are not allowed for Reviewers/Approvers in Workflow. We are in Planning 11.1.2.1 and we have unique requirement for Workflow - Approvers are required to not only review but also to make edits to the data submitted by Planners/Sub-Ordinates.
We want to hear from Planning Gurus on the best possible (and practical) way of achieving this in Planning Workflow model.
Regards,
Sathish

Why not just ask carrier to enable MMS? I know T-Mobile can and will do it, even if there is no data plan at all on the line. We did it for my daughter and I know T-Mobile has done it for others. I assume other carriers do the same, but don't know....Which is why I ask.
- Ira

How to enable USB drive and CDwrite in Trusted Solaris.

hello
I installed Trusted Solaris extensions in an X86 desktop and after that the cdwrite disappeared, the usb drive is not detected.
How do I enable the CD writer and the zip drive ? I have a file to be copied urgently, the USB drive doesn't work, the CD writer is not seen on the menu and internet / email is still not functional on this desktop
If there are some commands to be typed, please give me step by step instructions with command syntax and if there is a file to be altered please let me know where to find that file to be altered.
Thank you.

Hi Amit,
It's the same for Solaris. Take care about the line breaks in the document (sometimes one command seems to be two commands, it's one with parameters) and there is also a small bug: On page 6, step 5, it must read "Directory = topicmaps/example" (as printed in the screenshot).
Hope it helps
Detlev

How to Enable a Push Button In The Form That Is Always Greyed Out?

Greetings All,
I am trying to enable an existing "Return" Push Button(PB) which is always greyed out whenever the form is called in either an update or review mode. After some research, I found that this PB's functional property is "Enabled" (i.e. the enabled value = 'Yes'), and it is coded programatically set 'Off' in 30 places and 'On' in 2 places in the form that I inherit from my predecessor by using the following code:
SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN', <XXXXX>);
Where <XXXXX> could be either TRUE or FALSE. I've been spending a lot of time in trying to enable this "Return" PB (without modifying the existing programming code) by adding the 'SET_ITEM_ON_OR_OFF' built-in command to set the PB on in WHEN-BUTTON-PRESSED TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE Trigger, but all tries in vain. Could you please help me with the following question?
What is the easiest way to enable a PB that is set programmatically?
Is there something else I should know to enable a PB, in addition to what I have already mentioned above?
Thanks in advance,
Jinlan
--

Thanks all for your information and help. I included the following code, as suggested by Manu, in WHEN-MOUSE-DOWN TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE TRIGGER:
SET_ITEM_PROPERTY ('BLK_UPDATE.PB_RETURN_WORK_REQ', ENABLED, PROPERTY_TRUE);
and I made sure there was no " SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN_WORK_REQ', FALSE);" statements after the above code, but, the "Return" PB is still in grey; in other words, it is still not accessible when my form is called.
Perhaps, I need to place the above SET_ITEM_PROPERTY code in a different trigger other than the triggers mentioned above, uh? Any thoughts on this?
Manu,
You are absolutely right that the "SET_ITEM_ON_OR_OFF" is an ih-house written procedure which is defined/stored in the Attached Libraries. (I should have checked before making the "built-in" assumption. Thanks for catching and clarifying this.) Please help me with the following questions:
How do I view the procedure in the Attached Libraries???
Thanks in advance,
Jinlan
--

How to enable mail list archives in the wiki?

I have had a group wiki for some time, but the group maillist service was not enabled until recently. When I enabled "server group mail lists" in Server Admin and selected the "Mailing list" option in WGM for this group, I hoped that the "Mail" tab would appear in the wiki after sending a few messages to the group. Not so.
Using the 'serveradmin' command, it looks like the listArchive option is disabled:
$ sudo serveradmin settings web | grep -i listarchive
web:Sites:array_id:123.456.789.12:443wiki.mydomain.ca:mailingListArchive = no
When I try to change it, serveradmin echos "emptyarray":
$ sudo serveradmin settings web:Sites:array_id:123.456.789.12:443wiki.mydomain.ca:mailingListArchive = yes
web:Sites = emptyarray
...and the mailingListArchive attribute is still set to "no". Am I doing something wrong? How can I enable group list archives?
Thanks!

Found it: Server Admin -> Web -> Sites -> Web Services -> Mailing list web archive. Then go back to WGM -> Groups -> Basic, and the option for mailling list web archive is no longer greyed out.
Checking the wiki after a webserver restart, I get the "mail" tab now. There are no emails in the web archive, but thats a different issue .

HT1549 Can anybody tell me how to enable shared folders regardless of the number of sub folders?

Rather than having th "get info" and enable file sharing of every sub folder how can you enable file sharing in any depth ( number) of sub folders in one easy way? Any help appreciated.
Best regards, BAGBOY1

You will not find a serial number with the CD if the product is Educational version or Volume License ( Enterprise) version. For Educational version, you need to submit the Proof of Eligibility for the serial number. Contact Customer support for detail. For Volume License serial number, you need to login to the Adobe Licensing Website (LWS) then login using your email address that is used to place the order. If you do not have a password, you can create a new one from the login screen. Login to LWS and you can find the serial number there.

How to Enable Wake On Lan over the Internet??

Hi, I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet:
"If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.
You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
So how can I enable "Subnet Directed Broadcasts" on RV220W??
Thanks.
Raymond

Hi Jasbryan,
If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
I see many routers also provide this tools from their manager page.
Thanks.
Raymond

How to enable/disable archive mode from the pfile in oracle 10g?

hi
I am using oracle 10g.
Is there any mechanism to / parameter to enable or disable archive log mode?
can I enable arching directly from pfile without touching the startup process??
pls help.
thnx in advance..

Please is not in pfile that you enable/disable archive log mode.
For ENABLE Archivelog mode:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
For DISABLE Archivelog mode:
shutdown immediate
startup mount
alter database noarchivelog;
alter database open;

How to enable showing online status on the web for...

Hello, I am representing business account skype-runa.ru. There are problems with showing its online status on the web page. Exactly, the link http://mystatus.skype.com/smallicon/skype-runa.ru shows a grey image instead of green one.
What can we do to change this?

Tools >> Options >> Privacy >> Show Advanced Options, then check or tick Allow My Online Status to be Shown on the Web
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

How to enable USB 3.0 on Y50

Hello, I have this WD external hard drive that support USB 3.0. Normally when I copy data to the drive from my friend's laptop it can get up to 80 Mb/s. But the same drive, and the same file, when I copy from my Y50 (I plugged it in the USB 3.0 port) it only stay at around 40Mb/s. I think it is because there is something wrong with my USB 3.0 port, because both laptops have the same HDD and on the same OS. Anyone with any experience on this, please let me know. Thank you.

Can anyone share their average file copying speed? I'm not sure if this is a problem for my laptop only or is it some limit set by Lenovo in their BIOS.

How to enable USB 2.0 on the MEGA 651 - found a way

Similar Messages

Maybe you are looking for